M602: M602: unplug J82 J98, J30 caps the DC controller

Similar Questions

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• Insertion/thanks to the RAID controller plug in PCIe card in a UCS C220 M3, rather than embeded RAID controller?

  Hello!!

  We have a UCS C220 M3 server with a 1 TB SAS hard drive and a controller RAID embeded, like this:

  1	UCS-HDD1TI2F212	1 TB SAS 7.2 K rpm 3.5 inch HDD/hot plug/disc horse sleigh
  1	UCSC-RAID-ROM15	Embedded SW RAID 0, 1, 10, 5, 4 SAS/SATA ports

  If I add this controller RAID PCI card to my UCS server:

  UCS-RAID-9266CV =

  MegaRAID 9266CV-8i w/TFM + Super CAP

  US $ 1,686.00

  Going to work with her, ignoring the old RAID embeded it configured?

  The question is that VMWARE is not supported controllers shipped my RAID, so I want to add an external RAID PCI controller to support VMWARE.

  I don't know if it will work.

  Thank you!!

  Rodrigo,

  The embeded controller is built and not removable, it is integrated into each C220/C240. The units are designed to operate with PCIe controllers and mezzanine table when it is properly configured.

  Once you install the controller of the SIPC, you will need to do the following:

  (1) move the conectors mini SAS to the motherboard in the LSI PCIe controller

  (2) make sure that the slot PCIe what optionrom is enabled in the BIOS. (newer systems have their OptionROM disabled in the uninhabited slots (from the factory). If you do not see the OptionROM for the POST, then go back into the BIOS and enable the slot PCIe OptionROM

  (3) while you are in the BIOS, you can thus turn off Patsburg UCS regulatory table (the table embeded). It is of no use at this stage that you removed the cables up to the HARD drive Bay. It is also misleading if left active, you will see the configuration of arrays of LSI utility appear twice during POST. Time for the embeded and once again for the PCIe LSI controller.

  Dave

• failure of the graphics controller envy14t-1000 flashes code?

  For laptop of HP Envy 14-1000. i5 - 450 M, Radeon 5650 M. Out of warranty. New installation of Windows 8 Professional on an OCZ Agility SSD 4.

  At startup, caps lock flashes code indicates a failure of the graphics controller. Stays on for 2-5 minutes, but will then start Windows. This indicates imminent failure and a replacement motherboard is necessary, or is it the result of something else?

  On your laptop, there are several codes of different flashing given by a flashing caps lock key. You say that it is the graphical model controller failure error light. Use this document to make sure it is the correct error code.

  The ENVY of laptops series have their GPU soldered onto the motherboard. So if you've got a controller failure graphics card you might have to replace the entire motherboard of the laptop. This interview is possible to do it yourself, although difficult. Even if you specify your product is out of warranty, I suggest to contact HP Technical Support again and look in an interview of the laptop. If you are in the USA / Canada, you can contact HP at 1-800-474-6836. If you are outside the United States / Canada then here try to find contact information for your region.

• Satellite Pro M70 - ist is possible to change the craphics controller?

  Is it possible to change the graphics controller to my Satellite Pro M70...
  If so, where to buy a new one?

  THX

  Hello

  Well, in general it s is not possible to replace or update the graphics card.
  But I compared a Satellite Pro M70 unit because this series of laptop was delivered with different hardware configurations and I found that these installed graphics cards:
  Mobile Intel 915GM Express Chipset AlvisoGM 8 MB to 128 MB shared video memory
  ATI MOBILITY RADEON X600SE 128 MB of video memory
  ATI MOBILITY RADEON X 700 256 MB of video memory

  However, in my opinion you can not change the graphics card

• Satellite 2710 XDVD: the graphics controller hardware specification

  Can someone tell me about specific electrical equipment of the graphics controller (manufacturer, type, etc.)?
  And what kind of changes are in the BIOS version 7.60?
  Can I install more than 192 MB of RAM?

  Thank you very much

  Post edited by: philips

  Hello

  in the specification of this machine, I found that there a Trident Microsystems Cyber 9525 graphics card.
  And he says that the laptop can not use more than 192 MB of RAM.

  Good bye

• Satellite C660-117 - where to download the Ethernet controller driver?

  Hello.

  Can someone please help with my laptop? Here's my laptop specs:
  Model: Toshiba Satellite C660-117
  Part number: PSCOLE-00Y00JEN
  Serial number: XA458343K

  I have just rewiped my laptop with Windows 7 Ultimate. I use the laptop on a wireless connection. In Device Manager, I have an exclamation mark next to the Ethernet controller. This prevents me from going online.

  Can someone direct me please the link to download some driver I need?

  Thank you much much in advance.

  Dennis.

  Hey Buddy,

  Controller driver Ethernet can be both: WLAN or LAN card. All the drivers and tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed Windows 7 Ultimate, but may I ask why you haven t used the Toshiba with Windows 7 Home Premium recovery disc? On this disc are all the drivers and tools are installed because it s a picture of factory for you don t have stress with driver and installation tool.

• Satellite A100-773 - how to install the Ethernet controller driver?

  Hello

  I reinstalled Win Xp Prof on my satellite A100 - 773 (PSAA9E) and have a problem with the Ethernet controller. In Device Manager, the controller is marked with a yellow '?'.

  I use this driver http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & selSho rtMod = 444 & language = 17 & selOS = 10 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 12 & electedLanguage s = 17 & type = all & page = 2 & ID = 55434 & DISO = 1 0 & driverLanguage = 42

  Install it on the Device Manager and right click on ethernetcontroller - installation driver. This is the message that no driver is found (in the right! folder) nothing can be installed...

  I also remove ethernet controller, so that windows automatic reseacht for this, but nothing works.

  I don't know what I can do

  PS: Chipset utilities are installed

  Hello

  I can post a link where you can download the driver but I put t know what driver is missing now. Do you mean the WLAN or LAN card? What is the device?

  Please check the vendor and device ID to identify which device needs a driver. Go to Device Manager > right click on Ethernet controller > properties.
  There you should find some information like PCI\VEN_xxxx & DEV_xxxx
  With these codes you can look here to identify the device: http://www.pcidatabase.com/

  After this verification, the page of Toshiba to download a driver.

• Upgrading the graphics controller on Satellite A30-404

  I have a Satellite A30-404 with a relatively weak Intel® 852GME Graphics controller, some people say that you upgrade this computer laptop isn´t possible since the graphics controller is onboard, but after some research on www.intel.com I came to the conclusion that this chip after all is not onboard but is a slot to order ATI or Nvidia a better graphic chip trough. but iam still not sure if the chip is integrated or not so I wanted to know if this is possible

  Hello

  On the net I found detailed information on the graphics chip:

  Intel 852GME graphics controller
  Montara GT code name
  Yes engine 2D
  Yes 3D engine
  64-bit memory data Bus width

  But as far as I know it s not possible to update the graphics card.
  If you want you can ask to view ASP.

  Good bye

• HP2000 2D09SLA, cannot find the network controller driver after reclassification of win8 base to win8pro

  HP2000 2D09SLA, PROFESSIONAL 64 BITS OF WINDOWS 8.

  After installing windows8pro, I could not find driver for network controller, since then I can not use my wireless.

  Hello:

  Follow these steps, and I'll post the link to the wireless driver you need...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Assignment of VLAN dynamic by using the WC7520 controller

  Hello

  I use a few AP WNDAP360 for awhile and consider adding a WC7520 controller.

  However, I would use an assignment VLAN dynamic using a RADIUS server.

  Whereas it is possible with the 360 in stand-alone mode, it is clear to me if this can be done by using the WC7520 controller.

  The (obsolete?) reference manual said not a Word to this topic...

  Is there someone to share experiences with the 7520 and this type of configuration?

  Hello

  Thanks for your help!

  After reading the articles you suggested, I was still unable to find a definitive answer, so I asked pre-sales support and quickly received the following response from Tech Support level 2:

  There was a feature request to ask to implement, but it looks like it will not be implemented for the WC7520. Also, there is a feature request for the WC7600 which looks more promising, but still not possible currently and is not guaranteed to be implemented.

  In short: no, it is not possible, will not be on the WC7520 and could become so on the WC7600.

  Too bad, and it makes the much less interesting WC7520 for me, but at least it clearly quickly.

• Satellite A105-s4064: where to find the Ethernet controller (LAN) driver?

  Hello, I was recently forced to reformat my Satellite A105-s4064 due to some virus problems, and now when I look at my device manager my Ethernet controller is not installed.

  I checked the main site and they don't have an Ethernet controller I've ever seen.
  I can just be giving on it or research in the field of evil, but anyone know where I could find the Ethernet Controller driver for my laptop?

  Thank you
  Chris

  First of all, it would be interesting to know which driver LAN do you need? XP or Vista

  Second, the A105 laptop is an American series. I know that because of the last digit in the model number. 5 at the end means that it is a series that was designed for the American market and you need to find the drivers on the Web from Toshiba site we!

  However, if I understand correctly, you have already activated the Device Manager and the network card is not in the network adapters. There is an unknown device. Am I wrong?

  Often the LAN chip must come from Realtek. Then maybe you should try to download the driver directly from the Realtek page.

  Check it out

• Problems with the Ethernet controller and PCI Satellite L30-10 X device driver

  HelloW!

  Sorry for my bad English, I'm from the Russia.
  A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.

  I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...

  Hello

  Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!

  You must choose this number in the form of driver download for XP compatible drivers.
  I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.

  I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.

  I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.

  Good luck

• Satellite P300D-10U - how to enable the AHCI controller in the Bios

  I have toshiba satellite P300D-10U with windows vista 32-bit, disc ssd drive 2nd hard drive
  and I can't do IT controller SATA AHCI in the bios.

  http://www.Toshiba.EU/discontinued-products/satellite-P300D-10U/

  What can I do?
  install the new windows 7 32 / 64-bit and updated the bios for this maybe windows I can ON AHCI Controller in bios

  This bios has the ability to run on AHCI?

  Thanks for replying,
  Thank you.

  BIOS of the screen:
  http://ImageShack.com/a/img745/6711/ez591J.gif
  http://ImageShack.com/a/img901/7149/SRjUz3.gif
  http://ImageShack.com/a/img743/7539/8Pt5ro.gif
  http://ImageShack.com/a/img901/8573/iPfiOZ.gif
  http://ImageShack.com/a/img746/7872/T3nBfa.gif

  SSD of the screen
  http://ImageShack.com/a/img908/4148/ZjaDr1.gif
  http://ImageShack.com/a/img661/9900/846hMR.gif

  I changed the value to 0
  HKEY_LOCAL_MACHINE es\Msahci

  I install ATi SATA2 RAID (pilot preinstallation)
  http://www.gigabyte.com/products/product-page.aspx?pid=2500#DL

  CD..

  To my knowledge, the Satellite P300 series BIOS doesn t contain the ability to switch the AHCI compatible mode.

  I don t think that even after updating the BIOS such option would be available in the BIOS.

  I see on the first screenshot of the BIOS, the SSD drive is connected to the second controller.
  I recommend you connect the SSD to the first controller (instead of the HARD disk).
  Maybe then you could get better performance.

  Just for the note: portable computers with a graphics card ATI supports the AMD chipset, and in this case the ATI graphics card driver contains the SATA driver files.

  However, I guess the HARD disk controller specification allows the use of better performance of SSD drive.

• Installtion of Labview RT on the PXI controller

  We have a 8106 controller PXI that runs on the Windows operating system. We want to make it work on real-time OS of NOR. What are the steps I need to do to install this. Vascular when I boot in the BIOS of fron LabView RT, it displays "control transfer to the user program. System not configured, restart... ». I am able to connect it to MAX by the host PC and able to install Veristand 2011. But it does not reflect while the boot controller.

  Converting Windows a RT, there are some very important things that you must do to handle the conversion. big is your hard drive.  Your hard drive needs to be formatted with a FAT32 partition - probably formatted Windows NTFS, RT cannot read or use.  Convert your drive will be a manual step for you; If you follow these steps, you can use a disk RT PC Desktop Utility to perform the Exchange against (these instructions with a PXI-8106 module):

  First of all, must be a FAT32 partition on it and the format.

  1. Acquire a drive Flash USB 256 MB or more.  Plug it into your host computer.
  2. Image/Format the USB Flash drive via MAX
     • Under tools of-> creating USB utility MAX desktop PC
  3. Plug the USB key into 8106
  4. Enter the BIOS of 8106 using the "Delete" key
  5. Go to the menu "LabVIEW RT" and "Priming" the value "" Windows / other OS '. "
  6. Press F10 to save and exit, restart the controller.
  7. Enter the BIOS of 8106 using the "DELETE" key (we had to put the controller for Windows / Other and restart the computer to enable USB be detected/used)
  8. In the 'Boot' menu, make sure that "USB HDD" (probably also has your mfg of the inserted USB) option is #1 in the startup list (using keys + /)
  9. In 'Advanced-> Integrated Peripherals' ensure 'Legacy USB Support' is [ENABLED].
  10. Press F10 to save and exit, restart the controller.
  11. The startup controller using the USB flash drive.
  12. In the USB Flash Drive Options, choose the 6 'Options of Format' option (according to the image of the flash player, can say another thing, but option # is the same).
  13. Choose to format the drive, use the Option #2 in the format "Erase all Partitions on the disk and create a new single Partition" - This clears the disk partition information and creates a single FAT32 partition on the drive.
  14. FAT32 format (DO NOT use the use of a 8106 - BIOS does not include the system of dependency files).
  15. Once completed, restart the controller (to do this, you can use Option 9).

  Now, we must get the controller to think that it is a PXI and not a desktop RT PC controller

  1. Enter the BIOS of 8106 using the "Delete" key
  2. Go into the menu "LabVIEW RT" and "Boot" "LabVIEW RT safe mode" value
  3. Press F10 to save and exit, restart the controller.
  4. In MAX, find the device to remote systems.  Right click on the device and choose "format disk".
  5. Once you format the disk, the controller will think it is a PXI controller.
  6. (You may need to remove the MAX controller and press F5 to detect again for updated images)

  Now we are going to put the controller in RT mode so we can use it.

  1. Enter the BIOS of 8106 using the "Delete" key
  2. Go to the menu 'LabVIEW RT' and 'Start Configuration' value 'LabVIEW RT'
  3. Press F10 to save and exit, restart the controller.

  There you go.  Now you are ready to rule the world in a deterministic way.

  -Danny