12 c to 11g, ORA-39142 DataPump: incompatible version number 4.1

Similar Questions

• No format XPF or incompatible version number

  The system is a netbook Asus EEE PC with Windows 7 STARTER.

  I have a 3rd party program owner who until a week ago, has worked well. The netbook has been accidentally left and the battery ran down so he stop irregularly.

  After plugging it in, turn on and load upward and on the logon attempt, the program has not started normally but gave the error message and the error log attached. Windows has been updated also (20 updates), after which several reboots have been made and the error persists. Whenever the error generates a new error log - file on changes to error number slightly each time.

  I suspect it is an input file or registry that is damaged due to the sudden closure. The question is: which? I don't know enough to know what file needs to replace. I have not tried to re - install the program because it seems to me be a linked to itself, so re windows system file - install can not solve the problem and re - install the program is not simple because it is very personal and each relocation needs to contact the author of the program of re-registration of the license - it is not just a matter of executing an install disc. I have not attempted a system restore as I did it once before and it froze the system for a few hours, and it would also result in having to re - install the program with a license freshly generated.

  I googled for answers and only found things related to other programs or issues does not here apply. This program is needed for an integral part of our business, so any help would be greatly appreciated.

  

  

  I finally solved myself.

  It seems that there is corruption in the registry following the judgment of the food.

  I ran Chkdsk, corrected errors and re-installed the program in a new directory and it worked.

• ORA-01153: an incompatible media recovery is active

  Hello
  
  the eve of ments is created (11.1.0.7), time real usng apply.
  
  go to the eve of the database:
  
  SQL > select flashback_on from database v$.
  
  FLASHBACK_ON
  ------------------
  NO.
  
  
  SQL > alter flashback database;
  change the flashback of the database on
  *
  ERROR on line 1:
  ORA-01153: an incompatible media recovery is active
  
  
  question here:
  
  1. If I use flashback in a database of pending?
  
  2. If so, how can I turn it on?
  
  Thank you
  951932

  Yes, you can do it. But to allow the return of flame, you must have your database in editing mode.

  Example:

  SQL> select max(sequence#) from v$archived_log where applied='YES';
  
  MAX(SEQUENCE#)
  --------------
  546
  
  SQL>
  SQL> alter database recover managed standby database cancel;
  
  Database altered.
  
  SQL> alter system set db_flashback_retention_target=1440;
  
  System altered.
  
  SQL>
  SQL> alter database flashback on;
  
  Database altered.
  
  SQL> alter database recover managed standby database disconnect from session using current logfile;
  
  Database altered.
  
  SQL> select process,status,sequence# from v$managed_standby;
  
  PROCESS   STATUS        SEQUENCE#
  --------- ------------ ----------
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  ARCH      CONNECTED             0
  ARCH      CLOSING             545
  MRP0      APPLYING_LOG        547
  RFS       IDLE                  0
  RFS       IDLE                  0
  RFS       IDLE                547
  RFS       IDLE                  0
  
  9 rows selected.
  

• "Suitcase Fusion has detected an incompatible version of the Core FM" How can I solve this problem?

  Hi, when I turn on my mac, this note appears: ' SUITCASE FUSION has detected and an incompatible version of the Core FM. "

  Anyone know how to fix this?

  Thank you in advance! :-)

  e-Fusion-has-detected-an-incompatible-version-of-FMCore-Suitcase-Fusion-can-not-continuer https://support.Extensis.com/support/58278/58411/en-us/article/view/818/-Suitcas

• Install RDCman 2.2 the use Remote Desktop on windows server 2003 fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  CAN ANYONE HELP?

  Hi Mordi26:

  This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:

  http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en

• error message: "p incompatible a number of children through breakpoints as part of text U69846.

  I have an error message when I try to download my muse on businesscatalyst site.

  The error message says:

  'p incompatible a number of children through the breakpoints as part of text U69846.'

  What it means? How can I solve it?

  I need urgently to know how because I have to publish my site as soon as possible.

  Thank you.

  Hi Mattia,

  Please see my response dated February 23, 2016 09:39 bymistake with inconsistent across breakpoints children

  If you are using the latest version of Muse, you can check the MuseLog.txt file in your Documents folder. It has a log message that indicates what text frame has the inconsistency.

  If this does not help, please send us the Muse file to [email protected] for investigation and provide a link to this thread for the context. If the file is larger than 20 MB, you can use a service like Dropbox, creative cloud, WeTransfer, file sharing.

  Abhishek

• Muse of closure due to meet her error when sending to the FTP host, saying: «p incompatible a number of children through break points...» »

  I've been using Muse for a little over a year now, I've designed websites and uploaded to the FTP host with ease. Now from the other day after I updated Muse I got the following error message when sending to the FTP host:

  "Adobe Muse CC has encountered an error and will now close. «Please report the last actions little taken you to this error to Adobe Muse CC team p incompatible a number of children through breakpoints within text U1019»

  ... before transferring the update of Web site design that I had done a lot of design changes and not exactly what change would have made that mistake! I am so frustrated, I must have this site updated as soon as POSSIBLE. Let me know what can be done to have this problem. Thank you!

  I ended up solving the problem! So grateful, I was able to search deeper in the other positions on the issue and found a similar situation and how it was fixed. I fixed it by copying text in text boxes, the removal of the text box and copy text in new text boxes. Thanks for having this forum available for questions and answers for the Adobe programs!

• Adobe Muse CC error 'p incompatible a number of children through breakpoints in U25413 text'

  I make updates to a muse cc site adobe full-screen cursor site to a page. The only changes that I made this website was last updated images in the slider. I'm trying to get a glimpse in the browser I get the following error just before muse crashes; 'p incompatible a number of children through the breakpoints as part of text U25413.' Someone knows how to solve this problem, I need this job as soon as possible for my client today?

  

  Thanks Abhishek.G1 suggestion to your last email fixed my problem and I am now running. Deselect the 'meter' of the slide show was the faster easier fix for that (especially since I didn't have the counter for this project of the ways).

• p incompatible a number of children through the points of rupture in text U60606

  When the new download site I get this message.

  p incompatible a number of children through the points of rupture in text U60606

  Even if download on page 3 and stops.

  Need help

  Any ideas?

  Hello

  This looks to Re: error with incompatible children across breakpoints. Could you send your .muse file and try the workaround in this thread?

  Thank you

  Abhishek

• ORA-06553: PLS-306: wrong number or types of arguments errors

  Hi friends,
  
  When executing the below function I get error like
  
  I use the program version 2.1 sql Oracle.
  ============================
  ORA-06553: PLS-306: wrong number or types of arguments in the call to 'FUNC_TEST '.
  06553 00000 - "PLS - %s: %s.
  ============================
  
  CREATE OR REPLACE FUNCTION FUNC_TEST
  RETURN SYS_REFCURSOR
  AS
  PRAGMA AUTONOMOUS_TRANSACTION;
  total_val number (5): = 65;
  REF_TEST SYS_REFCURSOR;
  cursor c1 is
  Select substr(data,1,3). substr(Data,5) new_col text_1 update of data;
  BEGIN
  FOR employee_rec in c1
  LOOP
  text_1 update
  data value = substr (employee_rec.new_col, 1, 4). Chr (total_val) | substr(employee_rec.new_col,5) location being the c1;
  total_val: = total_val + 1;
  If total_val > 90 then
  total_val: = 65;
  end if;
  end loop;
  commit;
  REF_TEST OPEN for SELECT data FROM text_1;
  RETURN REF_TEST;
  END;
  -----------------------
  Table script:
  
  create table text_1
  (
  given varchar2 (20)
  )
  
  insert into text_1 values ("IAL030003IND")
  
  Please suggest.
  
  Thank you
  Lony

  >
  Yes, I also used a procedure and its fine in the working procedure.

  But according to her does not work... Or how can spend us in parameter to this function so that it can work?
  . . .
  If I am performing the function of the query below and I don't want to pass any parameter

  Select double FUNC_TEST;

  I get the error message like
  {,}
  >
  Your problem is that the function returns a ref cursor - that is a pointer to a result set. You can't put a ref cursor in a cell in the grid.

  The only reason why the procedure is 'work' is probably because you do not use a ref cursor in the version of the procedure.

  Why would you use a function that combines the data of attachment with the return of the data as a Ref Cursor? Once the data are set, there are fixed if you call the function a second time, that your data will be be stripped.

  If you want to return a Ref Cursor then you must use the function in the FROM clause: SELECT * FROM TABLE (myFunc ())

• ORA-06550: PLS-00394: wrong number of values in the list INTO a mesh FETCH

  Dear friends,
  I ask you a suggestion:
  
  The following code inserts a table errors (errori_work), the IDS of the records repeat (in the work of the table), but gives me this error:
  ORA-06550: PLS-00394: wrong number of values in the list of a FETCH statement INTO.
  
  The work of the table has the 78 columns: the problem of the fields used in the slider flew against the 78% ROWTYPE fields?
  I could use a record declared as the cursor (rec_tabwork cu_tabwork % ROWTYPE;), but in the MANUAL I need a field (ID_WORK) is not present in the cursor.
  
  declare
  CURSOR cu_tabwork IS
  SELECT CD_STRUTTURA, CD_SUB_STRUTTURA, NR_PRATICA, likelihood
  Work
  CD_STRUTTURA, CD_SUB_STRUTTURA, NR_PRATICA, applications GROUP
  HAVING COUNT (rowid) > 1
  UNION ALL
  SELECT CD_STRUTTURA, CD_SUB_STRUTTURA, NR_PRATICA, likelihood
  Work
  CD_STRUTTURA, CD_SUB_STRUTTURA, NR_PRATICA, applications GROUP
  After HAVING COUNT (rowid) > 2.
  rec_tabwork work % ROWTYPE;
  BEGIN
  Open cu_tabwork;
  loop
  extract the cu_tabwork in rec_tabwork;
  If FOUND then % cu_tabwork
  dbms_output.put_line (rec_tabwork. (ASL); -test
  INSERT INTO errori_work
  (cd_errore, note, ID_WORK)
  )
  VALUES ("ACC", "Record ripetuto nella table work", rec_tabwork.ID_WORK)
  );
  end if;
  EXIT WHEN cu_tabwork % NOTFOUND;
  end loop;
  close cu_tabwork;
  end;
  
  Can you help me?
  Thank you
  Leo

  Hello

  I loaded your data and ran the query. It's coz the NR_RICETTA contains a null value, so your State A.NR_RICETTA = B.NR_RICETTA will fail when it checks for NULL = NULL. Here is your output from the query

  PRAZY@orcl> select count(ID_AMBS) FROM WORK A
    2  WHERE A.ROWID > ANY (SELECT B.ROWID FROM WORK B
    3  WHERE A.CD_PRESIDIO        =B.CD_PRESIDIO
    4  AND A.GGMM_CONTATTO        =B.GGMM_CONTATTO
    5  AND A.NR_RICETTA   =B.NR_RICETTA
    6  AND A.CD_CONT_PRESCR       =B.CD_CONT_PRESCR
    7  AND A.NR_PROG_INT  =B.NR_PROG_INT
    8  AND A.DESTINAZIONE =B.DESTINAZIONE)
    9  /
  
  COUNT(ID_AMBS)
  --------------
              48
  
  Elapsed: 00:00:00.00
  

  Therefore, I have included NVL to A.NR_RICETTA, which will produce true when it finds null checking 0 = 0 and you will get your result. and this is what you are looking for

  PRAZY@orcl> select count(ID_AMBS) FROM WORK A
    2  WHERE A.ROWID > ANY (SELECT B.ROWID FROM WORK B
    3  WHERE A.CD_PRESIDIO        =B.CD_PRESIDIO
    4  AND A.GGMM_CONTATTO        =B.GGMM_CONTATTO
    5  AND NVL(A.NR_RICETTA,0)    =NVL(B.NR_RICETTA,0)
    6  AND A.CD_CONT_PRESCR       =B.CD_CONT_PRESCR
    7  AND A.NR_PROG_INT  =B.NR_PROG_INT
    8  AND A.DESTINAZIONE =B.DESTINAZIONE)
    9  /
  
  COUNT(ID_AMBS)
  --------------
              61
  
  Elapsed: 00:00:00.01
  

  If you want to insert the duplicate ID in a Table of errors, do an insert with the following select statement.

  INSERT INTO errori_work(cd_errore, note, ID_AMBS)
  SELECT 'CAC', 'Record ripetuto nella tabella Work',ID_AMBS FROM WORK A
  WHERE A.ROWID > ANY (SELECT B.ROWID FROM WORK B
  WHERE A.CD_PRESIDIO     =B.CD_PRESIDIO
  AND A.GGMM_CONTATTO     =B.GGMM_CONTATTO
  AND NVL(A.NR_RICETTA,0)     =NVL(B.NR_RICETTA,0)
  AND A.CD_CONT_PRESCR     =B.CD_CONT_PRESCR
  AND A.NR_PROG_INT     =B.NR_PROG_INT
  AND A.DESTINAZIONE     =B.DESTINAZIONE);
  

  Hope that solves your problem.

  See you soon!

• Oracle Forms 11g - ORA-12154: TNS error

  Well, until I post my info, I searched and searched all over Google, OTN, Experts-Exchange, etc... to try and figure this one out and I am puzzled. So here goes. I get the dreaded ' * ORA-12154: TNS: could not resolve the connect identifier specified * "error. This is my environment:
  
  ----------------------------------------------------------------------------------------------
  Server: Red Hat Enterprise Linux 5 version performs the following:
  Oracle Database 11g (Rel 1): 11.2.0.10
  Oracle Fusion Middleware 11g (rel. 11.1.1.2.0) Forms Server
  
  I can connect via SQL + no problem
  ----------------------------------------------------------------------------------------------
  Client: My Windows XP Professional PC.
  
  I can't TNSPING the SID of the database, no problem.
  I can connect via SQL + no problem
  I can connect via TOAD to the db without problem
  I can connect to Oracle Enterprise Manager through the web interface, no problem
  
  I have 2 houses Oracle (Oracle 8.0.6, Oracle 11.1.0.1) on my PC. The current House is currently the 11g one. I have my background on my PC Setup very well.
  
  The problem is when I try to run an example of form through the web, I created, the login prompt appears and I get my name in username/password / database SID and it is, I get the error. Of the clues as to what I should look for? Ultimately it is an application that all users will access and they should not have to worry about anything whatsoever to have installed on their PC.
  
  Thank you

  Keep in mind that file tnsnames.ora forms 11g is under $ORACLE_INSTANCE/config

• [11g] ORA-31061/ORA-19202 - how to insert data xmltype table/validation of the schema (just well formed)

  Hello

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Here's the demo program:

  ==============================

  create a global temporary table GTT_Test(data xmltype) validation delete rows;

  - and run this

  declare

  v_data xmltype.

  Start

  -It does not work

  /*

  v_data: = xmltype ("< itf:meta > < node / > < / itf:meta > '");

  */

  - but it works

  v_data: = xmltype)

  XMLDATA = > ' < my: meta > < node / > < / my: meta > ',

  schema = > null,

  validated = > 0,

  correct = > 1);

  - but try to insert into the table in the same way fails again:

  insert into GTT_Test (data)

  values (xmltype)

  XMLDATA = > ' < my: meta > < node / > < / my: meta > ',

  schema = > null,

  validated = > 0,

  correct = > 1));

  end;

  ==============================

  
  

  It translates errors ORA above and suspicion: "prefix 'my' is not declared".

  
  I need to create the TWG somehow different to accept without diagram validation?

  
  

  -Thanks!

  
  

  Kind regards

  Frank
  

  Hello.

  Try to declare to your XML namespace.

  for examplehttp://youaddress">

  "If you don't have a schema, try xmlns: my =" "(espace en blanc)."

• [11g] ORA-22993 when extracted xmltype great values in the outbreak of the BIU as a CLOB in another table

  [I ask nicely for a few comments for this question.

  Someone else can reproduce it with the test below?

  Is my code invalid or false?

  Or what is the problem here?

  -Thank you

  Frank

  ]

  Hello

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Trigger Before Insert or Update to a table, I invoke a PL/SQL package function to check the size of an xmltype column (passing as IN OUT NOCOPY).

  PL/SQL functions retrieves the xmltype. GetClobVal(), check its size, and when it is beyond a limit, he tries to insert the data into another table (GTT - global temporary table).

  Finally, it changes the value of the value of the column of xmltype to the shorter XML (just by referring to the corresponding record in the TWG).

  But the Insert SQL in the TWG operation strike ORA-22993: specified input is greater than the amount actual source.

  I don't know why this happens. In the internet I only find references on importing files in lob/clob.

  Anyone have the same problem?

  I know that you prefer to have a sample program to demonstrate the problem - I'll try to post one, but it will take time.

  But maybe someone can help me based on the information above already.

  -Thanks a lot!

  Best regards

  Frank

  I have reproduced the issue.

  It must be a bug.

• Oracle 11g {ORA-06550, PLS-00905}

  Hi all
  I am new to Oracle and I am trying to execute the procedure, but I get the error ORA-06550, PLS-00905
  Here is the procedure:
  create or replace PROCEDURE add_job
  (p_jobid IN jobs.empno%TYPE,
  p_jobtitle IN jobs.job%TYPE)
  IS
  BEGIN
  INSERT INTO scott.jobs (empno, job) VALUES (p_jobid, p_jobtitle);
  END add_job;
  /
  I type the following command to run the proc:
  Start
  add_job (6000, "ANALYST");
  end;
  
  Can anyone suggest something to remedy?
  Thanks in advance.
  
  Edited by: 994323 16/03/2013 15:37

  So mark your ANSWER question and provide your Oracle version 4-digit and use.

   tags next time you post.