120W:how RV to block of connected device to intern in the name of the device?

Similar Questions

• How to share an internet connection Wi - Fi, which requires the user name and password on a laptop computer of Windows 8 on a PC with Windows XP?

  I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...

  Hello Ashan,

  Thanks for the reply.

  You can try to follow the following suggestions to solve the problem.

  First, try to reset Internet Explorer and see if that helps.

  Reset Internet Explorer

  http://support.Microsoft.com/kb/923737

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Additional information:

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.

  (Also works for Windows 8)

  Updated a hardware driver that is not working properly

  To connect to the Internet

  http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How can I open a connection of default APDUS on the frame of the SIM card?

  Hello world

  I'm trying to run a basic command on my SIM card in my BlackBerry device (select MainFile). But I am stuck because even if I build my APDU command I still manage to open a conection APDU to the default service which will give me access to this directive.

  To open an APDU connection, you must spend aid (Application IdeDentifier sim card) parameter to the APDUConnection constructor but apparently there is no HELP for built-in applications, apparently AIDS is created only for the demand for custom sim card.

  Does someone could help out me?

  Thanks in advance.

  The set of BlackBerry API allows you to communicate with a custom application installed on a SIM card.  It does allow you direct access to any of the SIM card.

• How can I block an add-on which appears all the time after I remove it?

  I have disabled that add (Cinema more or sometimes with other name), daily also delete and restart firefox, but next time that I open it, it appears again.

  Try to use each software listed in this article to support:
  How can I get rid of malware?

• How can I block others to see my favorites if the password is not entered correctly? Now the user can cancel favorite startup password & view belongs to me

  I have the master password, and he asked to join the splash screen. Other users can view my favorites by canceling the password prompt. I want some more to avoid seeing my favorites if they do not know the password

  The master password is not intended to be used in this way.
  The password is only intended to encrypt the names and passwords stored in the Manager password with a level of additional encryption.
  The Congressman didn't block access to Firefox, if you get a prompt MP when starting Firefox, then you can cancel the command prompt and use Firefox normally.
  Only, you cannot access the passwords (you will get an another guest to provide the MP if necessary).

• How to prevent a TCP connection that is closed when the VI who opened it terminated.

  Hello everyone.

  I'm developing an application based on the servers and clients communicate through TCP in LabVIEW 2012.

  When the Server/client opens a TCP connection, it starts an asynchronosly running "Connection Manager", to which connection reference that takes so all communication happening. It all works very well.

  -J' have a situation where a client connection manager can be informed of another 'new' server. I would like to open the connection (to see if it is still valid) and then pass this reference of connection to the main client code to spawn a new connection manager. This avoids lock me up the Client code main with an ish timeout if the 'new' server does not really accept connections.

  The problem is that if the connection manager that opens the connection to the 'new' server is stopped, then it seems to destroy the reference he opened. This means that the other connection manager that has been happily character with the 'new' server has closed TCP communications (I get an error code 1 on an entry).

  I created an example to illustrate the issue which should be used as follows:

  1 run server.vi - he will listen for a connection on the specified port on his comics.

  2. run Launcher.vi CH - it will open a connection to the server and pass the TCP reference to an instance of connection Handler.vi, which he started.

  3. the connection manager needs to send data to the server

  4. stop the Launcher.vi CH

  5. the will of Handler.vi connection error.

  Any suggestion would be appreciated.

  See you soon

  John

  Do not perform the opening and closing of the TCP connection in Subvi. Do this to master VI.

• How can I block a user to download files on the web?

  I use Microsoft parental control for a few months, I dig several times to find t somehow I can block the user to download files? Like the way that we have the ability to "Block downloads of files on the web" in Web filtering.

  If this isn't the case, using the parental control of Microsoft, y at - it another way I can prevent users from downloading files?

  BTW, I'm on Windows 7 x 64.

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  We understand that you want to block the user to download files using the parental control. However, please be informed that this is not possible, since it is by design. Family Safety allows you to block downloads of files from the web, but not to download files:

  For more information, you can visit this Wiki link:

  Family Safety: frequently asked Questions

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• HOWTO connect to AP internal to the outside world?

  Hello experts,

  I have a Cisco 881w router, which has an integrated WLAN access point. This access point functions as a separate module, so I have to fill the two VLANS (normal LAN and WLAN). Basically, it works fine:

  • NAT to Internet works from two subnets (LAN and WLAN)
  • rattling of the works from clients in WIFI for customers of local network
  • rattling of the works from clients in LAN to WIFI customers
  • Ping works from clients in WIFI to any interrace on router
  • rattling of the works from the clients of any interface on the router LAN

  The only problem now is that when I am connected via command-line (CLI) interface directly to the AP (in order to upgrade the firmware), I can't access any host outside and inside of the router - even, I can't ping the internal interfaces of the router or IP addresses.

  Any ideas what I'm missing here?

  I have attached two configs (router and internal AP module) to this message.

  Thank you in advance for your help!

  Best regards, Matthias

  Matthias,

  The AP would look like this:

  !
  interface Dot11Radio0.1
  encapsulation dot1Q 1 native
  no ip route cache
  Bridge-Group 1
  !
  interface Dot11Radio0.10
  encapsulation dot1Q 10
  no ip route cache
  Bridge-group 10

  !
  interface GigabitEthernet0
  Description the GigabitEthernet incorporated AP 0 is an internal interface connecting AP with the host router
  no ip address
  no ip route cache
  !
  interface GigabitEthernet0.1
  encapsulation dot1Q 1 native
  no ip route cache
  Bridge-Group 1
  !
  interface GigabitEthernet0.10
  encapsulation dot1Q 10
  no ip route cache
  Bridge-group 10
  !
  interface BVI1
  IP 192.168.0.253 255.255.255.0
  no ip route cache
  !

  To clean things up, you can also remove all the "encryption vlan 1' under the radio interface."  The other bridge-group instructions that are there now will automatically be added when you configure the bridge under void interfaces group.

  Also, don't forget to change the vlan native on the interface of the trunk on the side of the router.

  Thank you

  Lee

• e-mail blocking - I get too many emails that are repeated and I don't know them. How do you block?

  I receive too many emails that are repeated and I don't know them. How do you block?

  Hi QAZIHUSAIN,

  See the following articles:

  Fight against spam

  Help keep spam from your Inbox

• connection blocked by admin device - I am the admin

  Problem:

  After I try to login, I get this message:

  Connection of the user to this computer has been blocked for a period of time by the administrator of the device

  The only way to open a session is started in safe mode. The message returns to normal mode.

  Background:

  I am the administrator one device. I have change my user / password admin successfully as I feared everything first to have been hacked. It shows "admin" next to my username.

  I had another user account for my child (which I have now deleted).

  My OS is El Capitan

  It just happened while I was working on my mac. Could I have (via an unintended shortcut) has allowed a kind of block/log out of my account?
  What can I do to connect again on my mac?

  It happens after you enter your password?

  The first thing to do is, while in Safe Mode, create a new user with administrator privileges and see if you can connect to this new account.

  You have any kind of software antivirus or "cleaner" installed?

• How can I have my network monitoring airport to see all connected devices?

  I would like to change the preferences of my Fritz! 1750th Repeater. I'll pass the LEDs of the question, but I can't access the device as http://fritz.repeater.

  Thank you for helping me!

  Sorry, we can not help you on a Fritz! Question of Repeater, but if you want an answer to your question of... How can I have my network monitoring airport to see all connected devices? ........

  On your MacBook Pro...

  Open Finder > Applications > utilities > AirPort Utility

  Hold down the option key on your Mac when you double-click on the image of your AirPort Base Station (we assume that you do not have an AirPort Base Station)

  A summary sheet opens to show all Wireless Clients that are currently connected to your network.

• I have a PCI-6221 NIC connected to a block of connection TBX-68. How can I see the wiring for the analog channels with MAX?

  Hi all

  I have a PCI-6221 NIC connected to a block of connection TBX-68. Once I found a drawing that shows me all the connections on my block of connection for each analog input tasks. I don't see this option now. Can someone describe to me how I can find this new?

  
  

• more than one user connects to pc (windows7). How can I block access to my media

  more than one user connects to pc (windows7). How can I block access to my media

  Original title: media sharing options?

  Hi Gabe,

  I appreciate the efforts that you put to publish the query on this forum.

  It would be better if you can provide additional information related to this query:

  Who are the media that you are trying to secure on the computer? Is it related to any multimedia files or folders?

  If you try to get the files or folders, you can use the Windows 7 encryption method to do:

  http://Windows.Microsoft.com/en-in/Windows7/encrypt-or-decrypt-a-folder-or-file

  Please get back to us with more information to help you better.

• How can I get internet connection from my laptop through my mobile device (it's just a rhetorical question)

  Hi,)

  "This is only to have knowledge of some aspects on the internet).

  I have samsung mini S4 mobile with internet connection.

  Suppose I'm somewhere whitout your support and I want to internt with my laptop through my mobile.

  What steps I have to do so that the internet connection via my cell phone.

  Thank you

  Johan

  Hello Johan,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  I suggest you try the following steps and check if it helps.

  a. connect your mobile device to the computer. If you use a USB (Universal Serial Bus) modem, simply plug it into a USB port on the computer. If you connect a mobile phone, connect the USB cable to your computer at one end and on the cell phone on the other.

  b. software start Internet sharing. If you use a cell phone, search for Internet sharing application from the 'Start' or 'Applications folder' menu on your phone. If you connect a USB modem, run the software supplied with the modem to start the connection.

  c. start the connection sharing. On the mobile phone, make sure that the Internet sharing application is set to share the mobile connection via USB. Once set, press the soft key 'Connect' on your cell phone or smart phone to share the connection with a computer. If you use a USB modem, click the 'Connect' button in the software of connection on your computer Desktop Manager of.

  d. check that the connection is active. After the Internet software to share bed 'Connected', open the network and sharing in Control Panel"and check that the connection is as a wired Internet connection. The control panel is located on the "Start" menu on your computer.

  e. connect to Internet. Launch a web browser or e-mail on your computer and check that the connection is active. Download and send to your connection speed will vary depending on force carrier and cell phone signal.

  f. put an end to the Internet via mobile by pressing the function key "Disconnect" on your mobile phone, or if you use a USB modem, click on the button "Logout" in the connection management software installed on the computer.

  Please also see this link:
  http://www.Samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00024090&fm_seq=24258

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• BlackBerry smartphones can not sync - device blocks when connect to usb

  Help!  Cannot connect my curve on my desk.  When I connect with usb, the device stops and does not connect to Desktop Manager.  Support of Sprint and blackberry are no help and tell me it's the computer.  I have followed all directions on the support site bloackberry for a clean uninstall of Office Automation, including deleting registry keys, make sure that windows is up-to-date, etc. - still not connect.  Have xp pro on this desk.  Other devices like cameras connect seamlessly via USB.  The Device Manager shows all the ports are enabled and work correctly.  Help, please.

  response to the original poster (months later):

  Finally my computer guy and I thought about it. There were two conflicts on my PC at the origin of the problem.

  First of all my photo editing software NEGLIGIBLE adoble a dot nox file nokiamanager which is in contradiction with the blackberry desktop software.

  Then the int reminders right start menu for my back up utlities for external hard drive is also in contradiction with blackberry desktop software.