128 Gb iPhone problem 7 with Focus/Light PhotoCamera

Similar Questions

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  someone has an idea of what's going on?

  The blue square is the area of the camera is in point and exposure on.

  Tap on the area actually taking a picture of. For example, if you take a photo of someone int eh the room and the bottom is very light (or dark), tap on the face of the person to turn to that.

  See it-> http://iphonephotographyschool.com/how-to-use-iphones-camera-app/

• Problems with the lighting effects filter

  I have problems with the lighting effects filter, I can use it on photographs, but the filter option is inactive on others, advice?

  This filter only works on images of 8 bits, not on 16 bit. Could it be the problem?

• drops of 128 GB - iPhone GPS 7 and no service error

  I have the iPhone 7 128 GB on Verizon network with big issues, especially when I run my GPS.  It is down to no service in areas that I know I have a full 4 g LTE bars and drop the GPS signal.   When I run my GPS (tried Waze/Google/Apple) it will go down to about 3 to 5 minutes at a time... a big problem when traveling in areas you are not familiar with.  When he returns, it will often get stuck on 3G, again in the areas that I know are well covered in the 4G LTE.  I tried to reset network connections already several times and rebooted.  Lets hope that this problem is corrected.  I'm in iOS 10.0.1

  Hi toebone7,

  I understand that you regularly lose cell phones and GPS signal for several minutes at a time. I know it's important to have a good connection, if available, so I'm happy to help you.

  Your troubleshooting is off to an excellent start to restart the iPhone and reset the network settings. Primarily by continuing further, I would recommend backing up your iPhone:
  The backup of your iPhone, iPad and iPod touch - Apple Support

  Once you have a backup, I recommend you to reset all the settings on your iPhone. This will not erase all content, but it can reset it your Wi - Fi settings, access code and background image. To do this, go to settings > general > reset > reset all settings. Once it is done by restarting, reconfigure your settings and try again.

  If you continue to have problems, you can restore your iPhone as new and test it without a backup to refine the cause:
  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Sync my iPhone on Itunes with NAS library

  Hello

  I used to sync to my iphone via itunes with iTunes library that I have stored on my NAS.

  I have a new computer and want to do it again.

  I had iTunes able to access my library iTunes stored on the NAS, I can play the music on my computer but when I want to sync my iphone, the obly on which I am authorized to do so by Itunes is the local library, not the one on the NAS.

  How can I make the NAS library one to use for syncing my Iphone?

  The phone searches for the exact same library file used the last time that synchronize you the phone with iTunes.

  Hold down the option key while starting iTunes. When you are prompted to select a library to select the file iTunes Library.itl the SIN. If it is not there then you have not kept the entire library on the NAS and the left critical parts of your library back on the old computer.  The only recourse is to get these files to this computer or a backup.  It is usually best to use a portable library but with a SIN, you can run into all kinds of trouble with any iTunes library. In this case, I suspect I know what the problem is, but there are several NAS posts here where we have no idea why a library all of a sudden I have messed up. iTunes and NAS do not play well together.

  Article turingtest2: make a portable split library - https://discussions.apple.com/docs/DOC-7392

• My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

  My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

  • Sync with iTunes on a Mac or a PC requires:

    • Mac OS X v10.8.5 or later
    • PC: Windows 7 or later
    • iTunes 12.3 or later (free download from www.itunes.com/download)

  iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

• my iphone was droppped and custom lights, but you can which is a light on it as if it is in standby mode. is there any fixes for this.

  my iphone was droppped and custom lights, but you can which is a light on it as if it is in standby mode. is there any fixes for this.

  Try to do a reset. Hold home and buttons power together for 30 seconds or until you see the Apple logo.

  If that does nothing, there's a chance that the LCD connector has partially disconnected. Although it is most likely your LCD is damaged.

  Apple may offer a replacement of the screen. You must check in your country, how much they charge.

  Alternatively, you can look for a reputable independent repairer who can replace the screen for you. This means waive all the Apple warranty services. But it's a bit less expensive for a C. 5 If you go this route, choose a repairer who offers a guarantee of 6 to 12 months. And don't go with the cheapest.

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• HP61-322N R ~ screen stays black at startup with flashing lights (capslock & liked keypad)

  I am pretty illiterate with a lot of the terminology, I am self-taught, so please dumb it down a bit.

  My husband took my computer laptop yesterday outside to clean the fan (it was overheating to the point of burning to the touch and close several times a day, so I thought there would be a ball of hair there our dog, but not just a few thick layers of dust). We cleaned, kept track of everything pretty well, he promised that he put everything back as it was - he is experienced with disassembly macbooks and other laptops we have owned to clean the fans without problem. He has taken apart again for each connection was insured, but the question remains.

  When we tried to turn it on, it sounds very well in what concerns the normal startup but the screen remains black and the caps lock light and a light on the number btwn keyboard end & pg key to blink slowly home.

  I looked, but nobody seems to have this exact problem - I did unplug, remove the battery, put the power for 20 sec plug, then power on without battery- but which did not help of course.

  I need a solution in order to save them on a hard drive and at least get a new laptop, as is the plan I had for months with this intense overheating problem. Has happened for at least two years or maybe even since we purchased in Nov 2009. Also, it seems absolutely crazy and stupid to block most of the fan with a speaker, among other things. His is no longer a mystery why I burned by this thing - seriously I could scramble the eggs with the HP thing.

  If I can't get the screen for good work, I can handle this, but I need to connect it via hdmi on my TV as a last resort to save them on my hard drive until I have trash the pos.

  OK, thanks for your help with flashing lights in codes, and although he was not really the key to this problem, I have solve my problem.

  We finally got to work this morning

  There had been flashes two times (several times) while the article says BIOS corruption - which does not make sense to me, but all of a sudden my husband thinks aloud that he may have changed the cards memory when assembling it back together.

  The key here is that if you took it apart and the screen will start - you has NOT put it back together properly and you, as I, probably shouldn't be disassemble computers

  Use your smart phone to take photos of each important step to dismantle everything.

  Once he came back, he also realized that they were not completely locked into the slot so maybe it was they key and maybe it doesn't matter what order they were but try both the cards memory switch disconnected and reconnected the if you experience this problem.

  Otherwise, follow the guides the person provided in their response. My problem was strictly material.

  Good luck

• I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good

  I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good overall. I export it to JPEG, max quality with the establishment of reference standards. I then open the image and it seems fine, as it did in photoshop. My problems begin to occur when I try to download on Twitter as my profile picture. I tried downloading from my office directly on the site via google chrome. When I download the image then begins to have jagged edges and overlooks the tablets. So I thought it was some performance settings, then I tweaked them and restarted a couple of times and still the same result. He would go on my desk but when uploaded to twitter as my profile picture is horrible. So I tried emailing the image of myself and the download through my phone. I opened the image on my iphone and it seemed fine as he did on my desktop but when I downloaded the image it makes then look blurry. I had this problem when downloading photos Twitter via my iphone, so it doesn't surprise me. I have read different forums saying: you must download it from the office, so I thought it would work like this. This could be a problem of twitter than compresses uploaded photos? Other people can do very much the same way, but it does not work for me. Please someone help me before I put my computer in an oven microwave.

  This could be a problem of twitter than compresses uploaded photos?

  Yes. The rest, we can answer. You wrote a lot, but very little discussion. Instead of accurate information you lose yourself in the vague descriptions. Screw color management to the wrong dimensions that trigger resizing server-side it could be any number of things here.

  Mylenium

• Photos in the camera roll on 'iPhone' cannot be imported because the iPhone is locked with a password or read

  6 + put iPhone updated to 10.0.0.2 and now get the error, the pictures on the Filmstrip on "iPhone" cannot be imported because the iPhone is locked with a password or read. You must enter your password on the iPhone to view and import them.

  Working solutions proposed so far. Guess I'll have to wait for the correction of a bug to Apple...

  iPhoto 11 (9.2.3); OS X 10.6.8

  On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

  LN

• Can apple care can be added to the iPhone 6s more with tiny lesions.

  Can care Apple can be added on an iPhone 6s more with a very small corner crack and the tooth. I mean small.

  N °

• Can I activate my iphone online here with my serial number?

  Can I activate my iphone online here with my serial number?

  You don't need serial number of the phone to turn it on. You need to connect to the internet and your cellular carrier's network to activate. See this support document to help with the activation steps.  Start with the iPhone, iPad and iPod touch - Apple Support

• My iphone is stuck with the itunes logo

  my iphone is stuck with the itunes logo. How can I unlock it? »

  Your phone needs to be restored. Take a look at the instructions here.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports