15 J191nb: 10 Windows will identify the Samsung SSD
Hello
On my laptop, I did the upgrade of Windows 10 and now I want to put an SSD.
I want to clone all my data cable USB to SATA.
But when I'm in 'Samsung data migration' and my SSD is connected, there is the message that I should connect a Samsung SSD...
So I thought that maybe there is a bad connection or something, but when I look in device management there are:
ASMT 2105 USB Device.
If I disconnect the SSD, it disappears.
On another computer, I did the same thing but under Windows 8.1 and there it worked.
(Samsung data migration does not support Windows 10)
What should I do?
The software has been the problem, Samsung Data Migration has failed.
Now, I did the clone with Macrium reflect (which supports win10) and it worked!
Tags: Notebooks
Similar Questions
-
Windows will not install Samsung SSD 850 (120GB)
HP Pavilion P600 a SSD 840 existing (~ 250GB) Win7 installed on and runs correctly. Try to install Win 8 (and later I tried 7) fails on nine 850 SSD with Windows UNABLE TO SEE DRIVE AND REQUEST for the DRIVER. (Samsung support says they are plug and play, no drivers needed). Existing Win7 can't see the disks when SSD 850 attached. I tried different SATA ports. I tried a Linux installation to prove that the disks were OK. Linux installed correctly for the 850 of SSD, but when Win tried to install on top of Linux, the error is 'disc locked'. (I tried Win XP but it blue screened during installation)
Bought two SSD 850 s. The two discs are new in sealed retail boxes. Windows disk management does not see the new drive, even after Disk rescan.
Samsung magician sees only the original SSD 840.Neither of the 850 SSDs accepts the Windows installation.
If Windows thinks the drive is too small?
Weird.
What happens if you try to install Windows 10?
How to download official Windows 10 ISO files
then
-
Title: original problems to access TV on Windows Media Center recordings
My media center has suddenly stopped working for recorded tv. Whenever I click on recorded TV, I get this message:
"Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
All other features of the media center work correctly.
Any help would be appreciated.
Hi vater19,
Remember to make changes?
Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference
Open the Setup TV tuner Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter
Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software and restart the game, but it didn't work... I don't know what to do. The whole eror massage: Silkroad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available
It is a file you need to edit in Notepad in the game directory. I would contact the manufacturer of the game as to what exact file. I have not personally done it, but I've seen this fix on other forums. MCP. MCDST. LVL 80
-
"Symantec service framework stopped working" 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is not available"
Favorite
E-mail address is removed from the privacy *.
http://Service1.Symantec.com/support/Norton360.nsf/0/a5ae667bcb41502b6525729f002036b2?OpenDocument
It's a Symantec/Norton problem; read the links above.
Contact Norton Support:
http://www.Symantec.com/en/AU/Norton/support/index.jsp
See you soon.
.
Mick Murphy - Microsoft partner
-
In the Middle looking emails from this error appears. Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available
Hello
1. do you remember make changes to your computer before this problem?
Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.
If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15
-
Original title: the iTunes does not work
every time I want to launch the iTunes, my computer shows "iTunes has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Hi Winston,
Were there any changes made on the computer before the show?
I suggest you refer to the article to fix the problems with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717
I suggest also refer to the link to support Apple iTunes:
https://discussions.Apple.com/community/iTunes/itunes_for_windows
-
Original title: program problem caused to stop working correctly. Windows will close the program and notify you if a solution is available.
On a number of attempts to install programs on my laptop with Vista home premium OS, I get the message, "caused a problem program to stop working correctly. Windows will close the program and notify you if a solution is available. "The program closes, but I am never notified a solution, and my attempts to solve the problem have not had any positive results. Among the programs that I tried to install are not important to me, but I really want to install Blackberry Desktop Software. Everything seems to go well with the installation until suddenly I get this message.
Hello
1. what programs are they?
2. What are they compatible with windows vista?Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. Click Start.
(b) in the search box type eventvwr.msc, and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer -
Computer: Vista Home Edition Premium, SP2
My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »
I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.
This is the error in the event log
Log name: Application
Source: Microsoft-Windows-search
Date: 2011-08-09 16:49:45
Event ID: 3084
Task category: Gatherer
Level: error
Keywords: Classic
User: n/a
Computer: rb - CCP
Description:
Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available. .The event XML:
3084
0
2
3
0
0 x 80000000000000
380048
Application
RB - CCP
Search.MediaCenterHandler.1
A server error occurred. Verify that the server is available.
Hello
I suggest you follow the methods and check if it helps.
Follow the steps below and check if it helps.
(a) exit any running instance of Windows Media Center.
(b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:
%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
To remove the file, follow these steps:
i. Click Start and then click Run.
II. in the Open box, type run and then click OK
If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
IV. in the details, click pane right mediacenterdatastore.db and then click on remove.
c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
(c) start Windows Media Center.
I hope this helps.
-
Windows will close the program and notify you if a solution is available"is the latest version of Skype 5.3... Initially it was working fine but now I'm not able to download same Skype server. the same error appears saying that windows cannot download server.
Hello
read this:
http://www.Skype.com/intl/en/welcomeback/
System update A small number of Skype clients have problems using Skype. For more about the system status and solutions, visit Skype Heartbeat.
Skype INTERNET phone service says a small percentage of its 170 million users have not not connect to its service, a problem that he is expected to be fixed with a software update.
Skype said on its Internet site the problem resulted from the corrupted data that affects computers using the operating systems Windows, Linux or Macintosh.
He has published a new version of Skype for Windows late Thursday to deal with the issue, said the company, which is based in the Luxembourg.
He has released a version for Mac.
Linux users have been told to delete a file manually.
Skype said people using its services on mobile phones, TVs or other appliances are not affected.
_________________________________________________________
If before is not the issue, repost in Skype forums
-
Original title: Windows Live Movie Maker
Hello! I have a problem with windows live movie maker. I had been using windows live movie maker before and was able to make several projects already. But recently I could no longer open my files and the following messages keep appearing on: "Windows Live Movie Maker has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. I downloaded the Windows Live Movie Maker program several times, but it does not work. Does this mean I can have deleted a file/program to do work and recover all the projects I've done? I remembered that once, I was removing a "Windows Live" in the program folder files because I wasn't happy with the Windows Live Messenger, kept popping up, which was not able to use, so I removed it from the list. Help, please!
Hello
The question you have posted is related to windows live movie maker and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
-
Original title: window problem
How can I get rid of window that States "causing problem program to stop working. Windows will close the program and notify you if a solution is available"when he was actually without any problem?
I do not have this message before I had another and removed advice Advisor total care and the problem resolved. Thank you for taking the time to help.
Al Ashton
-
I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
So I appreciate any help you can offer.
Hi luv2shop,.
This problem may occur because of the conflict by the present security software on the computer.
I suggest you try the following steps:
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/default.aspx/kb/290301
Step 3: Set the clean boot computer and try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can check with iolo for known problems
http://www.iolo.com/customercare/
Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
Check if you have picked up malware in your travels.
I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/MBAM.phpSuperAntispyware
http://SUPERAntiSpyware.com/Check in safe mode.
Vista advanced boot options
http://Techblissonline.com/Vista-advanced-boot-options/See if you can isolate a possible cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!
Hello
It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us
Don't forget to restart your computer after you run it.
If this does not work, try to uninstall and reinstall the drivers for your printer.
If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)
I hope this helps!
Mithrandir
Maybe you are looking for
-
HP Pavilion 14-b150ej Sleekboo: my HP Pavilion 14-b150ej Sleekbook supports WiDi/Miracast
Hey,. I would buy the "N Microsoft Wireless Display Adapter" and I want to know if my HP Pavilion 14 - b150ej Sleekbook supports the WiDi/Miracast. THX.
-
Duplicate name on the network with WRT160N v1
I get the error "a duplicate name exists on the network" on all my computers. I just started getting this error about a week ago. I don't change anything on the network and have had this router WRT160N v1 (with the latest version of the firmware) f
-
Zattoo is disconnected regularly.... 1 continues to function...I have to re open the applli and look for the program that ISnip. Yet I pay for 5 monthsThank you for your answer
-
FreeCell causes display erratic behavior
I encounter the following problems on a Toshiba laptop, I7, Windows 7 Professional - 64-bit processor. I recently started having problems with the program Windows 7 Freecell. When Irun the program screen will Flash at random intervals and the progra
-
How can I move cards of data from one program to another?
I have several programs datacard that I'm working on. It turns out that some of these data maps made in the wrong program by chance and I must now move them toward a stage in another program.If I click on "View members to step" and choose who I want