FreeCell causes display erratic behavior

Similar Questions

• Re: Erratic behavior on Satellite M40X

  Hello

  Very often but not always, when I start the laptop (Satellite M40X - 186 Windows XP SP3), after a while, the Windows Media Player popup window. I got close but it reappears etc... also very often, there's erratic behavior: the keyboard is unusable or the letter etc. which appears on the screen is not bound to the key... or the cursor moves in an irrational way.
  I scanned all the files from virus (Avast tool) I reinstalled XP, updated the ATI driver... but this does not appear to have solved the problem.

  No idea what is the cause of this failure?
  Thanks if you can help

  When you start your laptop computer and enter the BIOS settings, you can use keyboard and go to settings?

• Erratic behavior of the keyboard of a Satellite R830

  I can't use my portatil to write because the keyboard has an erratic behavior. When you are writing it jumps to different positions on the line.

  No doubt, it can be solved install drivers again, but I'm not an expert, then someone can help with this.

  ARO

  Hello

  Disable Touchpad while writing and using the keyboard.
  I had the same problem in the past.
  Finally, I noticed that I touched the surface of touchpad accidentally while typing and this is the reason why the cursor jumped around.

• Erratic behavior CBWMS view code with code disappears

  This just started today: behavior seen very erratic code with the code disappears.

  As I am writing code, or by selecting the code, he suddenly disappears. Sometimes portions of code disappears and shows a small section that is stressed.

  If I select a photo in design mode, it can also disappear.

  I tried reinstalling Dreamweaver, deleted the Setup folder, preferences removed, but seems to come back.

  Has anyone seen this type of erratic behavior before?

  Here is an example of the strange underlined text (under 'c'):

  

  If I select an underlined letter and keep typing, it continues the line in mode code like this:

  

  Once this emphasis indicates somewhere, this is the beginning of other erratic behaviors such as images or code disappears suddenly, etc..

  It started to happen after upgrading creative cloud today.

  Try to turn off dictation & speech recognition in your system settings.

  Nancy O.

• Double display C20 behavior

  Hello world

  I have a 9TC6 C20) with dual license installed.  I have exactly the same display on both screen every time.  I have fixed HDMI 1 and HDMI 2 as first screen role.  In this way, I got exactly that I want except for presentations remotely.  When the remote site starts a presentation, it is not displayed on the screen.

  I'd appreciate if anyone has an idea to get the behavior I'm looking for.

  Hi Martin,

  How your system is set up: as a single or dual monitor.
  I think you should install as a single monitor with HDMI outputs both primary role.
  In this case, your system will display video and presentation on both outputs.

  If the system is configured as double monitor, the presentation will be always check on the second exit (in which case it is configured as second or presentation only). But, as Setup you the second exit first, we saw not the presentation.

  I hope this will help you!

  Valentine's day

  Sent by Cisco Support technique iPad App

• Erratic behavior with puppets more complicated?

  Hi all

  Has anyone else experience some behaviors of random when you draw a puppet more complicated? I'm working now on one, it was looking and works very well, and then I moved an arm in illustrator. Returned to CA, and the Chief had jumped off in space.

  Character animator also appears, uncheck the box "Stand-alone Warp" whenever you update the puppet in illustrator, is there a way to keep? (Or I think better to use the '+' in the original?).

  Here's the head issue I mentioned:

  

  Thanks for the file. I was able to repro in Preview 1, but it moves is no longer the head in Preview 2. (You don't even need move a layer - just switch the visibility of a layer on or off always caused the problem before). Of course, it will always reset Warp independently and tie it to setting, so you'll always want to change the name of the head layer to:

  + head {attachTo = "Neck"}

• Erratic behavior of nod to the page

  When you scroll a PDF format article (updated to align with the page) is often some beavior erratic screen near the edge of the page. I hope that the behavior of the snap, but often the screen "wiggles" and changing position (only in the order of a few pixels) but obviously this isn't the desired behavior.

  This has something to do with what is discussed here?: http://forums.Adobe.com/message/4726426#4726426

  Mark Kunoff

  Information systems specialist

  Communications UI

  University of Indiana of public affairs and Government Relations

  It is a known problem in the v22 Viewer. It resolved in v23, with the case of the exception mentioned in the link above (a MSO is active when the user tries to scroll).

  Unless you have customized your own Adobe Content Viewer by using your Pro account or business, you will not see the fix until Apple approves the content viewer Adobe in the iTunes store.

  Neil

• Network expansion leads to erratic behavior

  Here is my set upwards.  I have an Airport Extreme w/Time Capsule as my main router.   It is connected to a switch via ethernet.  My switch Cat6 cable goes in another Airport Extreme base station (on the WAN port) on the other end of the House.  I have used additional ethernet ports on this 2nd AE to connect to another PC.  I've set up the 2nd Airport Extreme as a "extend a wireless network.  This worked great until recently.  Both the Airport extreme has the 7.7.7 and 7.6.7 applied firmware update and since then, everything went to pot.

  In the above scenario, I have very slow/limited/no wired and wireless connectivity.  When I do the 2nd AE just another switch by disabling its functionality wireless, everything works perfectly.  But once I turn on wireless, I lose connectivity on the two AE intermittently.  I'm starting to think that there is an IP address conflict or a kind of "collision" is going on, but do not know how to fix.

  Any suggestions?  I also disabled the IPv6.  This has had no effect

  AirPort Extreme which extends the network should NOT be configured to "extend a wireless network.  This parameter is used only when the airport connects to another airport use wireless... not Ethernet.

  In other words, if you have set up the AirPort Extreme to "extend a wireless network" and you try to connect an Ethernet cable to the device, which will create a massive feedback loop that crashes the network quite well.

  The right setting for the AirPort Extreme is "create a wireless network" which uses the exact same wireless network name and password as the Time Capsule network.  As a final step, make sure that the AirPort Extreme is set in Bridge Mode... before update you to save the new settings.

  Might be easier all over again and reset the AirPort Extreme back to default settings and then use Apple installation "Wizard" to configure AirPort Extreme. Other that by assigning a name to the device, the wizard will take care of all the other parameters to automatically.

  During installation, you will notice the display shows that the airport is set to "extend aid to Ethernet". But, if you go back after the installation and check the settings, you will see that the airport has been configured to "create a wireless network.

• Move the cursor to any pointer http causes displayed pop ups to twinkle power. Started by v18.0

  First noticed when I tried to save bookmarks. Started with the 18 Version update.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Erratic behavior of the mouse on the Qosmio DX730

  I recently purchased a Qosmio DX730 and the wireless mouse behaves erratically. He jumps on the screen and is just about manageable for basic use, but practically useless for any detail as the manipulation of graphics work. This is no program related to special, it happens with all the software and windows desktop. Things I've tried but it does not solve the problem;
  1. the batteries and resynchronization would have changed
  2A spoke with toshiba helpline, uninstalled all the drivers and reinstalled
  3. search for updated drivers (no)
  4. tool Keyboard wireless, mouse and transceiver to the store and exchanged - go always the problem
  The wireless keyboard works fine

  I was wondering if I was getting some wireless interference but have disabled all devices electrical and electronic local = no difference. I am reluctant to give up everything and go to a plug in mouse because it's brand new. Any help appreciated.

  Hello

  You used the mouse WLan but have you tested the feature with a USB mouse?
  I recommend doing this to check if he s really a computer problem.

• After Windows Update, is now silent erratic speaker (flickers power button) and sometimes erratic behavior of the mouse

  I noticed a few days after the restart after an update of Windows (a few weeks of updates at the same time evidence) on my old laptop Dell M60 when I hit the mute button would begin just flashing power continuously, but there is ore that turned off.  I restarted and it has always given this behavior, so I turned off the laptop and decided to watch it later.  Today, I had a friend send me an email on their desktop PC indicating that they have the same problem.

  Does anyone else know this? Identified/fixed?

  Hello

  Download the latest sound/audio driver and if not more recent re - install the same. Please use the instruction manual
  as we explain.

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High Definition Audio

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  1. go to the system manufacturer's website and search for the driver the newest download - SAVE - will click with the button straight on and RUN AS ADMIN
  (This is your rescue.) REBOOT after each installation of driver.

  NOTE: Driver Sound often rollback so check the version after installation and reboot to see if the version you
  installed is there, if not repeat - restart until it is. It may take several tries depending on the recommitments how he
  the fact.

  Then do the same for the site of the manufacturer of the device.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• cursor or erratic behavior

  while typing of e-mail or other documents, the cursor jumps to another location causing my typing be moved to another location. This change occurs without known reason and where it moves at random is

  You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

  This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

  If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

  I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Linking < img > causing display problems

  I encountered a problem that I can't understand, I can't find online related articles that could help me.

  I want to display three images of social media at the bottom of my business Web page, I did...

  < div id = 'social media' >

  " < a href =" " https://www.Facebook.com/scottishblue " > < img src = '... /images/Facebook-Scottish-Blue.png ' alt = 'Scottish Facebook' blue > < / has >

  " < a href =" https://Twitter.com/scotblu " " > < img src = '... /images/Twitter-Scottish-Blue.png ' alt = 'Scottish Twitter' blue > < / has >

  " < a href =" https://plus.Google.com/+Scottishblue " " > < img src = "... /images/Google-plus-Scottish-Blue.png" alt = "Google more Scottish blue" > < / has >

  < / div >

  But for some reason any when I connect up to their respective social media sites, images appear on separate lines inline rather together.

  

  

  I hope someone can help, as the impression that I ran into a brick wall.

  Kind regards

  Mike

  <! doctype html >

  <!-[if lt IE 7] > < class = "oldie ie6" html > <! [endif]-->

  <!-[if IE 7] > < class = "ie7 oldie" html > <! [endif]-->

  <!-[if IE 8] > < class = "ie8 oldie" html > <! [endif]-->

  <!-[if gt IE 8] > <!-->

  < class html = "" lang = "fr" > "

  <!-<! [endif]-->

  < head >

  < meta charset = "utf-8" >

  < meta name = "viewport" content = "width = device-width, original scale = 1" >

  <!-TemplateBeginEditable name = "doctitle"-->

  < title > Untitled Document < /title >

  <! - TemplateEndEditable - >

  "" < link href = "... / boilerplate.css" rel = "stylesheet" type = "text/css" >

  "" < link href = "... / stylesheet.css" rel = "stylesheet" type = "text/css" >

  < style type = "text/css" >

  body, td, th {}

  do-family: Tahoma, Geneva, without serif.

  }

  UL {}

  list-style-type: none;

  margin: 0;

  padding: 0;

  }

  Li {}

  float: right;

  }

  a {}

  display: block;

  padding: 8px;

  }

  a: link {}

  text-decoration: none;

  Color: #000;

  }

  a: visited {}

  text-decoration: none;

  Color: #000000;

  }

  a: hover {}

  text-decoration: none;

  color: #386FBD;

  }

  a: active {}

  text-decoration: none;

  color: #386FBD;

  }

  < / style >

  <!-[if lt IE 9] >

  "< script src="//html5shiv.googlecode.com/svn/trunk/html5.js "> < / script >

  <! [endif]-->

  "< script src ="... / respond.min.js "> < / script >"

  <!-TemplateBeginEditable name = "head"->

  <! - TemplateEndEditable - >

  "" < link href = "... /p7som/p7SOM-Core.CSS" rel = "stylesheet" type = "text/css" media = "all" >

  "< script type =" text/javascript"src ="... / p7som/p7SOMscripts.js "> < / script >"

  "" < link href = "... /p7som/p7SOM-04.CSS" rel = "stylesheet" type = "text/css" media = "all" >

  < / head >

  < body >

  < div class = "gridContainer clearfix" >

  < div id = "header-tel" >

  < class p = 'such padd' > < span class = "tel - police" > Agents Live 24/7 </span > 01382 339 605 < /p >

  < / div >

  "" < div id = "logo" > < a href = "#" > < img src = '... /images/Scottish-Blue.png ' alt = 'Scottish blue Logo' > < / has > < / div >

  < div id = 'menu' >

  < ul >

  < li > < a href = "#" > Service of Taxi < /a > < /li >

  < li > < a href = "#" > car & rental vans < /a > < /li >

  < li > < a href = "#" > Autocare < /a > < /li >

  < li > < a href = "#" > rental of minibuses < /a > < /li >

  < /ul >

  < / div >

  < div id = "page-img" > < / div >

  <!-TemplateBeginEditable name = "EditRegion3"->

  < div id = 'content page' > < / div >

  <! - TemplateEndEditable - >

  < div id = "footer" >

  "" < div id = "logo-low" > < a href = "#" > < img src = '... /images/Scottish-Blue-Small.png ' alt = 'Scottish small Logo blue' > < / has > < / div >

  < div id = 'menu-bottom' >

  < ul >

  < li > < a href = "#" > Emmock Business Park < /a > < /li >

  < li > < a href = "#" > jobs < /a > < /li >

  < li > < a href = "#" > car & rental vans < /a > < /li >

  < li > < a href = "#" > Autocare < /a > < /li >

  < li > < a href = "#" > rental of minibuses < /a > < /li >

  < /ul >

  < / div >

  < div id = "foot of page-content" >

  < class p 'blue-police' = > our operators are available 24 hours on 24, 7 days a week < /p >

  < p > some departments are available between 09:00 and 17:00, Monday to Friday < /p >

  < / div >

  < div id = 'social media' >

  " < a href =" " https://www.Facebook.com/scottishblue " > < img src = '... /images/Facebook-Scottish-Blue.png ' alt = 'Scottish Facebook' blue > < / has >

  " < a href =" https://Twitter.com/scotblu " " > < img src = '... /images/Twitter-Scottish-Blue.png ' alt = 'Scottish Twitter' blue > < / has >

  " < a href =" https://plus.Google.com/+Scottishblue " " > < img src = "... /images/Google-plus-Scottish-Blue.png" alt = "Google more Scottish blue" > < / has >

  < / div >

  < / div >

  < div id = "foot of page-to-page" >

  < p > blue Scottish & reg; is a trademark of ScotBlue Ltd. < /p >

  < p > ScotBlue Ltd. & copy; 2016 < /p >

  < / div >

  < / div >

  < div id = "p7SOM_1" class = "p7SOM-04 p7SOM p7SOMnoscript som right" >

  < div id = "p7SOMtb_1" class = "p7SOM-04 som-toolbar p7SOMnoscript som-top-left" > < a href = "#p7SOM_1" title = "Hide/Show Menu" > & equiv.; < /a > < / div >

  < ul >

  < class li 'som-in-head-bar' = > < span id = "p7SOMhd_1" class = "som-header" > Menu </span > < /li >

  < li > < a href = "#" > home < /a >

  < ul >

  < li > < a href = "#" > about us < /a > < /li >

  < li > < a href = "#" > contact us < /a > < /li >

  < /ul >

  < /li >

  < li > < a href = "#" > rental of minibuses < /a >

  < ul >

  < li > < a href = "#" > Arbroath < /a > < /li >

  < li > < a href = "#" > Brechin < /a > < /li >

  < li > < a href = "#" > Carnoustie < /a > < /li >

  < li > < a href = "#" > Dundee < /a > < /li >

  < li > < a href = "#" > Forfar < /a > < /li >

  < li > < a href = "#" > Kirriemuir < /a > < /li >

  < li > < a href = "#" > Monifieth < /a > < /li >

  < li > < a href = "#" > Montrose < /a > < /li >

  < /ul >

  < /li >

  < li > < a href = "#" > Services < /a > Autocare

  < ul >

  < li > < a href = "#" > tires & adjustment < /a > < /li >

  < li > < a href = "#" > car care < /a > < /li >

  < li > < a href = "#" > visit our Garage < /a > < /li >

  < /ul >

  < /li >

  < li > < a href = "#" > car & rental vans < /a >

  < ul >

  < li > < a href = "#" > practice car & rental vans < /a > < /li >

  < /ul >

  < /li >

  < li > < a href = "#" > Taxi Service < /a >

  < ul >

  < li > < a href = "#" > Dundee Taxis < /a > < /li >

  < /ul >

  < /li >

  < li > < a href = "#" > < /a > job offers

  < ul >

  < li > < a href = "#" > personal Garage < /a > < /li >

  < li > < a href = "#" > drivers < /a > < /li >

  < li > < a href = "#" > Home Office < /a > < /li >

  < /ul >

  < /li >

  < li > < a href = "#" > < /a > Emmock Business Park

  < ul >

  < li > < a href = "#" > visit Emmock Business Park < /a > < /li >

  < li > < a href = "#" > company of < /a > < /li > rental property

  < /ul >

  < /li >

  < /ul >

  < script type = "text/javascript" > P7_SOMop('p7SOM_1',950,2,1,600,1,1,0,1,400,0,0) < /script >

  < / div >

  <! - start Cookie Script - > < script type = "text/javascript" charset = "UTF-8"src="//cookie-script.com/s/d380d1dd2d896bb379f30e7ea83b9cb3.js" > < / script > <! - Cookie Script end - > ".

  < / body >

  < / html >

  Images related to a line, use the display: inline or display: inline-block in your CSS code.

• Insert Record Server causing DWCC2015 down behaviors?

  Since the upgrade to DWCC2015 I have real problems with the server behaviors panel in that whenever I try to create a behavior to insert a record, it blocks DW.

  I had to install the Panel "Disapproved the server behaviors" to get my database, links and server panels behaviors back, but I assumed that the feature in their midst would continue to operate.

  Would be recognizing all of the advice offered because it is totally flat all my websites database!

  Thank you.

  NJ

  Obsolete means ' is no longer supported. You use them at your own risk.

  If you really need to use server behaviors, you must install Dreamweaver CS6, which is included in your subscription to creative cloud. CS6 can coexist with the latest version of the CC on the same computer. However, you cannot run both programs at the same time (at least on Windows).

• Erratic behavior of satellite L750 - 16Z DVD Drive

  The DVD drive for this model is HL-DT-ST DVDRAM GT30N.

  From a previous post, I was led to understand that it is normal that the reader to click on start. Once I've connected on W7 (after 2 minutes) it clicks again.

  If I go into the PC diagnostic tool, it will commit again.

  He also started clicking at random moments, which is very annoying.

  I think it has changed when I'm fiddling around with one of these TOSHIBA. I guess it could be either:

  Toshiba TEMPRO
  PC Diagnostic tool
  PC Health Monitor
  Service station

  This could really be something, but now it is so irritating that I disabled HL-DT-ST DVDRAM GT30N in devmgmt. I prefer to not do what I'm going to have to keep activation and deactivation.

  Experts out there who understand the strange operation of this configuration?

  null

  > If this is the case uncheck you the "Toshiba PC Health Monitor" to start msconfig work and is it safe to do?

  Yes, it's really safe!
  The "Toshiba PC Health Monitor" would not start when starting the device if you disable the "Toshiba PC Health Monitor" in the msconfig Startup tab.

  But this software can still be used if you need you can find the exe file in all programs-> Toshiba