16 lines of data, truncated to 1 line of data?

Similar Questions

• How to truncate 1000 rows from a table of 7000 lines?

  Hello

  Please give me a quick answer to truncate the 1000 rows from a table of 7000 lines... I don't want to truncate the entire table

  Thank you all for the valuable support,

  My activity is still ongoing... Somehow my client was not specific about what lines are deleted. It has no date column in the table to delete records by date...

  The table contains information about the error logs, so he wanted to keep a few lines and remove the rest... and then copy the table to another database.

  So right now using this query:

  SQL > delete (select * from ) where rownum<>;

  Once again thank you to all...

• Deleted lines flashback: unable to read data - table definition has changed

  Hi all
  
  Its really Important.
  
  I unfortunately truncated a table using
  Trancate table mytable;
  
  and made an alter table to reduce the length of the pricision data.
  
  But I need back data of tabla
  
  I used the command to get the deleted lines, below, it shows error.
  
  query: select * from pol_tot versions between timestamp systimestamp-1 and systimestamp;
  error: ORA-01466: unable to read data - table definition has changed
  
  query: flashback table pol_tot to timestamp systimestamp - interval '45' minutes;
  error: ORA-01466: unable to read data - table definition has changed
  
  Well want to share your ideas how can I deleted thoose Records.
  
  Edited by: 887268 July 8, 2012 12:26

  This

  and Made a alter table to decrease data pricision length.
  

  is the cause of your error.

  Now please do what is obvious.

  -------------
  Sybrand Bakker
  Senior Oracle DBA

• Truncate the text after the first line in TextFlow

  I have a TextFlow object that is rendered in a Sprite with several lines.

  For a compact display, I now want to show only the first line, followed by 3 dots (...).

  I've not found a good approach up to now.

  There is a support for truncation.  It is limited to cases of use of label and requires the use of the TextLine factories.  There is no support for text editable with truncation.   Example below.

  Hope that helps,

  Richard

  /**
ADOBE SYSTEMS INCORPORATED
Copyright 2011 Adobe Systems Incorporated
All Rights Reserved.

  NOTICE:  Adobe permits you to use, modify, and distribute this file
  in accordance with the terms of the Adobe license agreement
  accompanying it.  If you have received this file from a source
  other than Adobe, then your use, modification, or distribution
  of it requires the prior written permission of Adobe.
  */
  package
  {
      import flash.display.DisplayObject;
      import flash.display.Sprite;
      import flash.display.StageAlign;
      import flash.display.StageScaleMode;
      import flash.geom.Rectangle;
      import flash.text.StyleSheet;
      import flash.utils.ByteArray;
     
      import flashx.textLayout.container.ContainerController;
      import flashx.textLayout.conversion.TextConverter;
      import flashx.textLayout.elements.TextFlow;
      import flashx.textLayout.formats.TextLayoutFormat;
      import flashx.textLayout.factory.StringTextLineFactory;
      import flashx.textLayout.factory.TextFlowTextLineFactory;
      import flashx.textLayout.factory.TruncationOptions;
     
      [SWF(width="500", height="500")]
      public class Truncation extends Sprite
      {
         
          public function Truncation()
          {
              stage.align = StageAlign.TOP_LEFT;
              stage.scaleMode = StageScaleMode.NO_SCALE;
             
              // sample of truncation with the StringFactory
              var stringFactory:StringTextLineFactory = new StringTextLineFactory();
              var stringSprite:Sprite = new Sprite();
              stringSprite.x = 25; stringSprite.y = 25; addChild(stringSprite);
              // this bounds has no maximum height
              stringFactory.compositionBounds = new Rectangle(0,0,200,NaN);
              stringFactory.text = "This is an extremely long and overly verbose string of text that I would like to see trunctated.";
              // truncate after two lines
              stringFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,2);
              stringFactory.createTextLines(function (obj:DisplayObject):void { stringSprite.addChild(obj); });
             
              // sample of truncation with the TextFlowTextLineFactory
              var flowFactory:TextFlowTextLineFactory = new TextFlowTextLineFactory();
              var flowSprite:Sprite = new Sprite();
              flowSprite.x = 25; flowSprite.y = 75; addChild(flowSprite);
              // this bounds has no maximum height
              flowFactory.compositionBounds = new Rectangle(0,0,200,NaN);
              // truncate after three lines with a big red ellipsis
              flowFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,3,TextLayoutFormat.createTextLayoutFormat({ fontSize:24, lineHeight:0, color:0xff0000 }));
              flowFactory.createTextLines(function (obj:DisplayObject):void { flowSprite.addChild(obj); },TextConverter.importToFlow(Data.markup, TextConverter.TEXT_LAYOUT_FORMAT));
          }
      }
  }
  class Data
  {
      public static const markup:String = "" +
          "

  The following excerpt is from Ethan Brand by Nathaniel Hawthorne.

  " +
          "

  There are many such lime-kilns in that tract of country, for the purpose of burning the white marble which composes" +
          " a large part of the substance of the hills. Some of them, built years ago, and long deserted, with weeds growing in the vacant round of the interior, which is open to the sky," +
          " and grass and wild-flowers rooting themselves into the chinks of the stones, look already like relics of antiquity, and may yet be overspread with the lichens of centuries to come." +
          " Others, where the lime-burner still feeds his daily and nightlong fire, afford points of interest to the wanderer among the hills, who seats himself on a log of wood or a fragment " +
          "of marble, to hold a chat with the solitary man. It is a lonesome, and, when the character is inclined to thought, may be an intensely thoughtful occupation; as it proved in the case " +
          "of Ethan Brand, who had mused to such strange purpose, in days gone by, while the fire in this very kiln was burning.

  The man who now watched the fire was of a " +
          "different order, and troubled himself with no thoughts save the very few that were requisite to his business. At frequent intervals, he flung back the clashing weight of the iron door, " +
          "and, turning his face from the insufferable glare, thrust in huge logs of oak, or stirred the immense brands with a long pole. Within the furnace were seen the curling and riotous flames, " +
          "and the burning marble, almost molten with the intensity of heat; while without, the reflection of the fire quivered on the dark intricacy of the surrounding forest, and showed in the " +
          "foreground a bright and ruddy little picture of the hut, the spring beside its door, the athletic and coal-begrimed figure of the lime-burner, and the half-frightened child, shrinking " +
          "into the protection of his father's shadow. And when again the iron door was closed, then reappeared the tender light of the half-full moon, which vainly strove to trace out the " +
          "indistinct shapes of the neighboring mountains; and, in the upper sky, there was a flitting congregation of clouds, still faintly tinged with the rosy sunset, though thus far down " +
          "into the valley the sunshine had vanished long and long ago.

  ";
  }
  

• Oracle Discoverer Desktop truncate lines at least 10,000

  Hi all
  
  I want to export Excel file from Oracle Discoverer Desktop. If the file contains more than 10,000 lines, it truncates the result and shows that the lines first 10,000.
  
  How can I solve this problem? I changed this limit in Oracle Discoverer Viewer, but I don't know where I can do this in office.
  
  Best regards
  Mariano. -.

  In the office, go to the Tools menu and select Options...

  The second tab is for the Governor of the query, and you can uncheck (or change) the "recovered data limited to: ' point. This works in Desktop 10.1.2.48.18.

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• All my data have doubled and the lines are slightly compensation and overlapping. Unusable.

  All my data have doubled and the lines are slightly compensation and overlapping. Unusable. How to restore the distorted view course content?

  Hello Arnold,.

  A screenshot of the upper-left corner of your document could help the issue. Include as much as in the example below.

  If this section of the table does not display data "doubled and shifted", provide a second screenshot of a section of the same size, showing a sample of the data in question.

  Kind regards

  Barry

• Hide using the date of beginning and end of line

  Is there a way to hide using the start date and end date of line

  

  One way to do is to add a filter column (which may hide once it is configured) like this:

  

  The formula in D2, filled to the bottom, is:

  = AND(A2≥$B$8,A2≤$B$9)

  The filter (on column D) looks like this in the right panel:

  

  C9 formula is:

  = SUMIFS(C,A,">="&B8,A,"<="&B9)

  After changing the end date of 2014-12-31, you get this:

  

  I left column displayed D just for illustration.

  SG

• 2d line, numbers and dates. How to take into account the date value when drawing a 2d line?

  Hello. I just encountered a problem when tracing a line 2d with numbers.

  I have the following table:

  Date	Total
  2015 12-31	R $150 000,00
  2016 03-19	R $159 000,00
  2016-03-25	R$ 166,090.00
  2016-04-01	R$ 159,250.90
  2016 04-10	R$ 165,343.41

  But when I create a 2d line chart it does take into account the fact that the 1st line is in December. Numbers do not fit the distance between the data symbols according to the date, but instead just consider the dates like any other label. Which causes the curve final not not to be specific

  

  Is it possible to make account numbers of dates when tracing of graphics?

  If you don't want the dates to be spaced when you do not have uniform intervals so you can use a cloud of points in 2D instead of a 2D line and turn on the connection line, something like this:

  

  Note that with the Scatter 2D (unlike with 2D line) you do not want to be defined as a column header in the left column.

  SG

• How do a continuous line when it is absent from the data table?

  I have a graph all the traces, but since there are blank cells on the table there are broken lines. I just need to know how to make them continuous.

  This discussion should be under the numbers instead of MacBook Air?  If so, remove needless zero data points or extrapolation can estimate points which are currently zero, as appropriate.  If zero points are valid results, consider changing a scatter chart.

• DAQ USB 6363 - generate digital data series through the single DIO line

  Hello

  I'm new with Labview, currently, I bought NI DAQ USB 6363 for generating control signals and signals analog accquire. I would like to send digital data series through one of the digital IOs with throughput of 30 kbps. Please see the attachment for the data frame. Could someone comment the feasibility of this? Y at - it codes for the example that I can refer to? Most of the examples I've looked at so far deals to generate several line instead of 1 single line. How can I achieve this?

  Thank you

  Diem

  Hey diem.

  After looking on your code, I understand what you were trying to do. Here's how I'd do. Usually we do not write code to clients, but you peaked my curiosity of! I hope this helps. Good luck!

  ~ kgarrett

• How to send frames to header + 1 byte of data in network LIN?

  Hello

  I use USB-8476 to communicate to a slave in a LIN network. Can someone tell me how I can send a header file more 1 byte of data to the slave in a LIN network.

  I need to send a sync + id 00 X 34 break, followed by a byte of data. I don't know how a master can send this extra 1 byte of data. I need to send this command to the LED and byte 1 to control the level of illumination of the LED lights.

  If anyone has examples for this, can share you here?

  Thank you

  Hi Andreas,

  This error has not yet been documented, but I got the information on the other forums.

  Error name error Code (hex) description

  Task-master of 1040 LinBusErrorTxSyncTimeout LIN interface is trying to send a

  synchronize the bytes and not not not receive the sync byte

  during the period.

  This is the description. The problem is solved, the baud rate I gave was higher than the speed of the slave units. Now, it seems to work correctly.

  Thank you.

• Data read rotation Labview via a cable line RS232 and USB converter series

  I have a program to read a string of data to a 2B Technologies Ozone monitor model 202.  The program does not come to the top with an error message, but every 30 to 40 hours Labview will turn my row of data.  For example, if a normal data row is 34.5, 37.5, 812.0, 934.0, 07/11/14, 11:52:38 and coma delaminated, then the problem is the reading (first digit) ozone layer displays the reference zero, then the seconds of the playback time will be moves in the spot ozone in the data file and the line will turn from there.  I tried to change the bytes being read to the Labview program and the many ways of emptying the buffer, but the problem is still there.  I have attached an example of data file in which the problem took place and a screenshot of my labview program.  I am a user of labview fairly new descriptive help would be much appreciated.  Thank you!

  When you use a termination character, do not use the bytes to the Port. Just wire a constant to the number of bytes that is larger that the largest message possible.

  Lynn

• calculation on line data

  Hello world

  I have just started using the tiara and I have no idea how I can do a few calculations, I want to have chanell with result depends on the other chanells, but not the same data line, I can use the SMC (line, no.) and I can do to make it function in a cell with my result chanell (example for the first row of data (: SMC (1, Ch("[4]/Channel1")) = (ChD (1, Ch("[4]/Channel")) + SMC (2, Ch("[4]/Channel"))) / 2), but I don't know how I can do this function automatically for the other line (for example, line 2 ChD (2, Ch("[4]/Channel1")) = (ChD (2, Ch("[4]/Channel")) + SMC (3, Ch("[4]/Channel"))) / 2) I have a line of 500,000 of data so I need know some functions that will be clalculated this function on the lines of my data. I will be grateful for your help.

  Hello!

  For performance of good calculations on your data of type long, you must use a formula in tiara. In the past, it was the FormulaCalc command. Today, the ChnCalculate is recommended. The similar oddity in the two commands, they can only do calculations on one line (it's repeat them verry fast for all lines). For you the problem this behavior results in a no aproach obvoius. You must copy your data to a second channel, remove the number of values that gives your shift and then use the two channels for the calculation. Here's the script for offset = 1:

  Call ChnCopy("[1]/Channel","[1]/ChannelCopy")
  Call DataBlDel("[1]/ChannelCopy", 1, 1)
  Call ChnCalculate("Ch(""[1]/Result"" )= Ch(""[1]/Channel"" ) + Ch(""[1]/ChannelCopy"" )/2")
  

  Matthias

• Retrieve data after a certain line

  Hi guys,.

  Any advice or assistance would be appreciated

  Question: How do I retrieve data after a certain line of a string of delimited by commas that are read from a port series?

  More info: to have a map which includes data values and can be read in the computer via a serial port. Example of a string of acquired data as below:

  Data = 1 bit/s = sensor tool
  ; Label, time, voltage, pressure, temperature, current
  A, 01:33, 5.1, 18.1, 31.2, -.
  B, 01:34, 5.5, 19.2, 30.5, -.
  Data = 1 bit/s = sensor tool
  ; Label, time, voltage, pressure, temperature, current
  A, 01:35, 5.3, 18.3, 30.1, -.
  B, 01:36, 5.1, 19.0, 30.5, -.

  Data = 1 bit/s = sensor tool
  ; Label, time, voltage, pressure, temperature, current
  A, 01:37, 5.1, 18.1, 30.8, -.
  B, 01:38, 5.3, 19.2, 30.1, -.

  The value of these data is kept up-to-date line by line. I would like to start to extract data only on the 3rd block of incoming data. I would not that the first 2 blocks incoming data.

  More info: currently, my idea to do this is to analyse the '; '. data"and put it in a counter. If there are 2 '; data' scanner, then woud counter set to True in a case to start structure to extract the output data. Please see my attached picture.

  However, I'm not able to create also a counter using a table that I can't use a while loop and register shift. You have an idea? Thank you very much.

  Hi pokerprof,

  If you plan to get the data individually, have you tried the following:

  

  

  Put the output of the select.vi (where it is used as part of the counter) to a comparison so that when we tell: counter-online 3, begin to extract.

  Alternatively, you can use the below:
  

  The number of iterations that you plan to run? My concern would be the overflow of integer of the meter (http://en.wikipedia.org/wiki/Integer_overflow).

  You can try like vi, illustrated by johnsold (if you get all the data in a single iteration).

  Thank you

  Warm greetings,

  Lennard.C