17 ch - R3 does not light but will it happen again?

Similar Questions

• I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

  I dropped it and now the screen does not light, but sounds like the notifications are on.

  Hi!, Sensei:

  Welcome to Forum!

  To help you, is necessary that you enter make, model (without serial number) and operating system.

• Does not light but not dead no HELP

  OK, I read the forum and understand the 20 sec press/release/press reset to running.

  Mine does not start.

  I let the battery completely and six months later (patience is the virtue) I've tried ot load and repeat the reset procedure.

  Stilli does not work.

  HOWEVER: when I plug it to the PC to load, the PC recognizes the device and a 'ring' in tone.  I can unplug the unit and the PC not the tone 'ring' ' sothe PC is grateful.

  ALSO, when I do the reset 20 sec procedure, I get the tone "sound" of the PC and when I release the button and press it again, I get the 'ring in your' so the PC recognizes some sort o' on the device activity.

  Better yet, when plugged in for the first time, autoplay starts and I can say that it displays the contents of the drive.  It is empty.  I can see the SANSA in windows Explorer.  I can copy music to it.  I can play music from SANSA on the PC memory.

  When I browse the SANSA, there is no directory STRUCTURE - no = - just the root folder directory.

  But I can't help doing will make the unit come alive to play.  I tried blindly start playing by pressing select and play buttons... but no response through the atria.

  Oh, I also opened the device upwards (brave soul I'm - well, once an engineer, always and engineer!) and measure the voltage at the terminals of the battery as 3.75V.  With the camera connected to the computer, the voltage remains the same.  I tried the switch on the case open... nothing happened.

  SO: my conclusion is that the nit of base works but is not part of the man/Machine Interface (connection to vs PC standalone unit).

  Any ideas on how to get the display?

  Thanks for the idea, but I'd already left him in charge for several days.  I'll hold on to the unit for spare parts assuing that the battery is still good and I got headphones intakes stand before.  I t hink it is toast unless I heard from someone else.  As a former engineer, used to try to diagnose things, I can't think anything that we have not tried. I will mark the closed thread but personally he will remain open should post again.

  I SINCERELY APPRECIATE THE TIME YOU SPENT THINKING ABOUT THIS TOPIC AND DISPLAY.

  Terry

• Opening of session in normal mode does not work, but will be safely mode__

  I can log into safe mode, but when I try to log in normal mode I get a message that says that the connection has failed and my stuff cannot be loaded correctly. I'm sure it's a software problem, but I don't know how to correct it. I'm working on a Windows vista computer.

  What is your problem error message?

  We need EXACT messages here.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• With the help of CS5: CR2 files from my new Canon Rebel T4i does not open, but will be of CR2 of Rebel XSi?

  I can't find the good RAW plug-in for use with Photoshop CS5 on my iMac OSX 10.8.2 running.  I downloaded many version but so far without success.

  RAW and CS5 work together perfectly when the images came my Rebel XSi, but does not now, when they come to my new T4i rebel? Movies with Tec support and that he recommended the database was unsuccessful. Any ideas anyone?

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  You need to upgrade to CS6 and ACR at least 7.1...

  Mylenium

• Why the cd dvd burner motor does not start but will start to manual

  I have a E-Machines, does not start Windows Vista Home Premium 32-Bit, Windows media player or no matter what dvd burner

  Hello

  1. it worked earlier? If so, remember you have changed your computer?

  2. what happens when you insert a CD or a DVD?

  Run the fixit from this link to activate autorun and check to see if this helps: How to disable the functionality of Windows Autorun http://support.microsoft.com/kb/967715

  Note: click the fixit to activate autorun.

• HP Color LaserJet CM1312nfi MFP does not print, but will copy

  Copies, scans, faxes fine, but when I print the pages are blank. I get messages of ERROR of no..

  When I have access to the pages of menu to perform tasks that includes a print, the pages are blank.

  It recognizes all the cartridges and copy very well.

  Hello mikev9359,

  I understand your concerns. Unfortunately, for this type of printer, I need you to lead our Enterprise Business Community Forums. It will be the right section for this problem. Good luck.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• MacBook pro screen does not light

  Hi, I have a macbook pro 13 inch edition at the beginning of 2015. A few days when I tried to turn on my computer, screen not turn on including the lamp to the rear logo. but I heard the startup sound with the keyboard backlight on. I plugged the computer to an external monitor, then I saw in this computer monitor works fine. I tried to make configurations LANDAU and SMC. screen still does not work. but sometimes laptop screen lights up, then when I restart the computer, the screen will come up again. help me guys what should I do? Thank you

  If you're lucky, the connection to the screen is not correctly connected or must be replaced.  If you are unlucky, the display needs to be replaced.  Make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

  Hello

  I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

  If I hit him again once all the lights go out and the whole system fails.

  Any ideas on how to solve this problem?

  Thank you
  Alan

  Hello

  Did you put this phone in the standby or hibernation mode?

  Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
  Try to remove the battery from the laptop and unplug the power adapter.
  Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
  Then try again to put the laptop.

  If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
  In this case the contact of technicians would be desirable.

• My iPod 5th generation does not start (it will stay on the apple logo) and will not be detected by iTunes.

  Last night I tried to turn on my iPod that has not been loaded. I plugged it so that it can start loading. I think the iPod as was the accused, has no need for me to start and should have done by itself. When I pressed the button home to start using it, I noticed it was not on. Then I pressed the power button and then saw he was showing the Apple logo and then it turns off again. I tried pressing the "home" button and the Start button / stop at the same time and the same thing will happen. I also tried connecting to my computer and it did not recognize.

  Try the remaining actines of the:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• My iPad has been slow and has now stopped working completely and does not light

  My iPad is a few years old (I think that the iPad 2, 32GB model A1395 2, no internet,).  For w a few weeks, it has been very slow but has now stopped completely.  I can't turn on even when connected to a power source.  Any ideas?

  Bob

  You can try to reset: hold the home and power buttons at the same time and continue to hold until the Apple appears (up to 30 seconds). If you see the Apple, you should be in business. Once the reset is complete, the Slide to Unlock screen will be displayed.

  If this does not work, you will probably want to pay a visit to the Apple Store, so they can watch. It costs nothing for looking at it. Don't forget to take a go-Genius Bar, so you don't have to wait all day...

  Good luck

  GB

• Update Windows XP with sp3: does not light (error number: 0 x 80070424)

  original title: windows XP with sp3 update: does not light

  I had a virus security 2012, but deleted it and double check run in safe mode. But everything turns right, but went to update windows and its red shield at the bottom right but Security Center see the its 'market '. Then when MS and ran virus check and came back clean, so when updating the site and:

  [Error number: 0 x 80070424] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Any help? Please

  windseaker,

  A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50686.msi.

  06/22 / 1109:20:45