1900ACS DDNS for FTP

Similar Questions

• How do you define a default value for ftp sites to always open with Windows Explorer (instead of Internet Explorer)?

  When I opened sites ftp from one of our other offices, I get a screen of login and password.  Then the site will automatically open in Internet Explorer.  So I go to the Page/open ftp site in Windows Explorer.  So I enter my login and password again.

  Is there a way to set a default value for ftp sites will automatically open in Windows Explorer, so I don't have to go through this all the time?

  Hello
  See:
  FTP and Internet Explorer
  http://blogs.msdn.com/Askie/archive/2009/04/16/FTP-and-Internet-Explorer-what-to-do-what-to-do.aspx
  or
  Another solution: go to My Network Places > add network place. Follow it
  Wizard to add the FTP site. The URL format
  ftp://username: * e-mail address is removed from the privacy * should work.

  If the system of sites is not on the desktop... Display properties > Desktop >
  Customize > check it out.

  Hope this helps,
  Don

• IP SCAN can be used for ftp files

  
  Hello

  I would like to know, if IP SCAN can be used by clients or applications for FTP files to one of the nodes in database?

  Thank you!

  Hello

  SCAN IP addresses can be used for the ftp, sftp and ssh connection for the cars already running cluster service . Because when the cluster services perform scan ip collage to the public network interface nic for example;

  In the RAC Node1

  Oracle @testdbrac1: / oracle: > ifconfig - a

  eth0 Link encap HWaddr 00:50:56:B8:40:B0

  INET addr:Address IP PUBLIC Bcast:xxx.x.x.xxx mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:feb8:40 b 0 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1006522 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 92530 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 99913091 (95.2 MiB) TX bytes: 32001574 (30.5 MiB)

  eth0:2 Link encap HWaddr 00:50:56:B8:40:B0

  INET addr:SCAN IP_1 Bcast:xxx.x.x.xxx mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  In node RAC 2

  Oracle @testdbrac2: / oracle: > ifconfig - a

  eth0 Link encap HWaddr 00:50:56:B8:40:B1

  INET addr:Address IP PUBLIC Bcast:xxx.x.x.xxx mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:feb8:40 b 1 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1004162 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 69260 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 100817580 (96.1 MiB) TX bytes: 15328431 (14.6 MiB)

  eth0:2 Link encap HWaddr 00:50:56:B8:40:B1

  INET addr:SCAN IP_2 Bcast:xxx.x.x.xxx mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00:50:56:B8:40:B1

  INET addr:SCAN IP_3 Bcast: xxx.x.x.xxx mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  You can also check the output of command 'ifconfig - a' when rac services are not running. If you are planning for failover scenarios, it is reasonable.

• How to remove or reset stored passwords for FTP site to Windows Explorer (Win XP)

  In fact I use Windows XP but I couldn't find a forum for this more.

  I have an FTP site, that I need to access regularly and his user name and password was stored for Windows Explorer could open it without asking for confirmation.  The user name & password have changed.  I deleted all the entries in my neighborhood network for the FTP site.  Still, he connects with the former name of user and password (UN/pw).  Access to this account is paralyzed, so I can't use it, but it get connected and so I know that he uses this UN/pw.  I tried to use the URL: ftp://user: * e-mail address is removed from the privacy * and it always goes back to the old UN/pw.  I don't want to delete all passwords that will allow 'Internet Options'.  How to clear it?

  Hi Kev,

  I had the same problem but with Win 7.  I got mine to work by looking for the FTP site in the registry and delete it.

  Run regedit

  Searched using EDIT , FIND , ftp.whatever.com , clicking SEARCH the NEXT

  (Found in HKEY_CURRENT_USER, Software, Microsoft, FTP accounts )

  Right click on the site FTP send me problems (ftp.whatever.com) and deleted.

  Closed regedit.

  Pulled up to Windows Explorer: problem solved.

  You might want to give that a try.

  Scotty T.

  If she has not broken; Fix it until it is broken.

• Generation of a binary file on the fly for FTP

  I have a requirement (don't we all?)

  I need to pick up a record of fixed length from a FTP server, convert it to a defined XML representation and then place the file within a XML archive .zip and store the results on a second client FTP server pick up.

  Everything is going well except that my results are not an archive valid .zip.

  I wrote a function defined by the user to manage zipping them upward and have indicated below. I think I'm a bad handling something in the final stages of this process because what is written is not valid.

  Anyone tried something like this with success?

  package com.f17.customfunction;
  
  import java.io.*;
  import java.util.zip.ZipEntry;
  import java.util.zip.ZipOutputStream;
  import java.io.ByteArrayOutputStream;
  import java.util.List;
  import oracle.fabric.common.xml.xpath.IXPathContext;
  import oracle.fabric.common.xml.xpath.IXPathFunction;
  import oracle.fabric.common.xml.xpath.XPathFunctionException;
  import oracle.xml.parser.v2.XMLDocument;
  import oracle.xml.parser.v2.XMLDocumentFragment;
  
  public class zipFile implements IXPathFunction {
      public zipFile() {
          super();
      }
  
      public Object call(IXPathContext iXPathContext,
                         List<?> list) throws XPathFunctionException {
          String contentS;
          String fileName;
          contentS = (String) list.get(0);
          fileName = (String) list.get(1);
          try {
              ByteArrayOutputStream bout = new ByteArrayOutputStream();
              ZipOutputStream zipOutputStream = new ZipOutputStream(bout);
              ZipEntry zipEntry = new ZipEntry(fileName);
              zipOutputStream.putNextEntry(zipEntry);
              ByteArrayInputStream InputStream = new ByteArrayInputStream(contentS.getBytes());
              byte[] buf = new byte[1024];
              int bytesRead;
              while ((bytesRead = InputStream.read(buf)) > 0) {
                      bout.write(buf, 0, bytesRead);
              }
              byte[] binData = bout.toByteArray();
              String outPut;
              outPut = javax.xml.bind.DatatypeConverter.printHexBinary(binData);
              XMLDocument doc = new XMLDocument();
              XMLDocumentFragment docOut = (XMLDocumentFragment)doc.createDocumentFragment();
              docOut.addText("<compressedFile>" + outPut + "</compressedFile>");
              zipOutputStream.closeEntry();
              zipOutputStream.close();
              bout.close();
              return docOut;
          } catch (Exception e) {
              System.out.println(e);
          }
          return null;
      }
  }
  

  You must close the input zip, flush and close the ZipOutputStream, ByteArrayOutputStream before read you. In addition, the buffer must be written on ZipOutputStream and not ByteArrayOutputStream. Try:

  package com.f17.customfunction;

  import java. IO;

  import java.util.zip.ZipEntry;

  java.util.zip.ZipOutputStream import;

  import java.io.ByteArrayOutputStream.

  import java.util.List;

  Import oracle.fabric.common.xml.xpath.IXPathContext;

  Import oracle.fabric.common.xml.xpath.IXPathFunction;

  Import oracle.fabric.common.xml.xpath.XPathFunctionException;

  Import oracle.xml.parser.v2.XMLDocument;

  Import oracle.xml.parser.v2.XMLDocumentFragment;

  public class zipFile implements {IXPathFunction}

  {} public zipFile()

  Super();

  }

  public call for the object (IXPathContext, iXPathContext,

  The list list) get {XPathFunctionException}

  The contents of the string;

  String fileName;

  Content = (String) list.get (0);

  fileName (String) = list.get (1);

  try {}

  ByteArrayOutputStream combat = new ByteArrayOutputStream();

  ZipOutputStream zipOutputStream = new ZipOutputStream (end);

  ZipEntry zipEntry = new ZipEntry (fileName);

  zipOutputStream.putNextEntry (zipEntry);

  ByteArrayInputStream InputStream = new ByteArrayInputStream (contentS.getBytes ());

  Byte [] buf = new byte [1024];

  int bytesRead;

  While ((bytesRead = InputStream.read (buf)) > 0) {}

  .write zipOutputStream(buf, 0, bytesRead);

  }

  zipOutputStream.closeEntry ();

  zipOutputStream.flush ();

  zipOutputStream.close ();

  Tip. Flush();

  Tip. Close();

  Byte [] binData = bout.toByteArray ();

  Output string;

  Output = javax.xml.bind.DatatypeConverter.printHexBinary (binData);

  XMLDocument doc = new XMLDocument();

  XMLDocumentFragment docOut = (XMLDocumentFragment) doc.createDocumentFragment ();

  docOut.addText ("" + output + "");

  return docOut;

  } catch (Exception e) {}

  System.out.println (e);

  }

  Returns a null value.

  }

  }

• New parameters for FTP in MUSE?

  I have trouble sending my page to the 'internett '.

  It seems that some options have been removed when using FTP.

  Anyone know what I mean?

  Sorry for the bad English and maybe stupid question

  Hi and thanks for fast response. Its my fault - he wrote in the wrong place, wrong password everything is now smoooooth!

• Where to enter the password for ftp access?

  I am using GoLive 8.0.1 on Mac.  I don't use it much, so I'm a little rusty.  I have always used to write and manage only a single site and access ftp as a single site.

  Recently, I changed the password to the ftp site, and of course GoLive cannot access this ftp site now.  But I forgot entry points or to change the password in GoLive, so it can access the ftp site.

  Thanks for any input.

  Don Wong

  [email protected]

  > I use GoLive 8.0.1 on Mac. I don't use it much, so I'm a little rusty.

  > I always used it to write and manage as a single site, a single-access

  > ftp site.

  > I recently changed the password on the site ftp and of course GoLive

  > can not access to this ftp site now. But I forgot where to entry or

  > change password in GoLive, so it can access the ftp site.

  If it's something like 7 GoLive you will go on Site, settings, publish

  Server and 'Add' or 'Edit' and existing account. I hope this helps.

  Carol

• By specifying the file name for FTP out OSB transport

  I want OSB based service that will send via FTP a file with a specific name to a remote ftp location.
  It seems that OSB cannot do this because the FTP transport on a business service only allows you to specify the prefix and the suffix, and then generates a file name long great for midlle parties.
  
  Anyone know how to replace it and specify the name you want to call remote file name?

  mdsrobbins wrote:
  Your answer was useful, but being new OSB I'm not yet quite there because I want to spend a "variable" in the name of the file. Now I want a CSV file, I've specified a service proxy in a format MFL behind a jms messaging ftp queue. Business service underlying it is the ftp using the MFL format service. This works all I in the message flow to the proxy I can't have access to a user defined property that contains the name of the file that I could then pull and stuff it into the header 'Filename' as suggested above.

  DOE, anyone got any ideas how I can get access to a property of a JMS message file name?

  What I understand
  JMSQ - JMS PRoxy (MFL) - Pipeline---> BS (MFL/FTP) - FTP server

  If you want to set the file name contained custom JMS message headers? When creating your Proxy JMS you must follow these steps
  (1) for the creation of Proxy JMS in the transportation Configuration page select get all the headers = Yes
  (2) if the name of the file is set as defined by the JMS message property user then use $Header in your pipeline/message flow. This variable can contain your user-defined properties. If the user sets the property is part of the JMS message and then use $body.

  Thank you
  Maury

• BI Bot for ftp?

  Hello
  
  
  someone at - there a way to use the book (11.1.1.6.5) to make a ftp iBot a report?
  
  
  Thank you
  
  Robert.

  Check this little extension to the report as a file using ibot and then ftp

  http://blog.Guident.com/2010/10/pushing-OBIEE-reports-or-dashboards-to-an-FTP-server/

• Flash site; using DW for ftp; you need flash player?

  I did a site in Flash CS4.  With the help of DW as my ftp.  When I download my index.html and go the field he says I need to download the latest flash player, I already downloaded.  Is something I do in DW or Flash that will not allow the swf to render in the browser?  I'm new to both applications.

  Post a link to your page

  May be you are viewing your cache page (before you flash updatef)-try to clear it.

  Your browser may need a plugin.

  What version of Flash is installed?

• Debugging logs more BEAUTIFUL for the ftp adapter

  Hi all
  How can I turn on debugging more BEAUTIFUL level for ftp in SOA application adapter.
  
  Thank you

  Not sure, you can do this just for the file but

  connect on EM and go to SOA-> soa_infra

  Right-click on soa_infra and select newspapers-> configuration of newspapers

  Expand oracle.soa

  you will see

  Oracle.SOA.adapter

  Assign to this level you want

  see you soon
  James

• How to create a model to look for an ftp location loading flat files

  Hello world
  
  My requirement is - I need my model to a ftp location where our files food source are kept and loading every day. Right now my model ODI resembles my odi home default load my files. Can anyone suggest how this is possible. And also how can I customize the loading of flat file in the package (my flat file has a name that has the date of days on that (0628xxx.txt for today and tomorrow 0629xxx.txt).) How can I tell odi to search for files in my parcel today and tomorrow.
  
  Thanks in advance.
  
  concerning
  Badin

  Babu,

  The default port for ftp is 21. What is your port?
  You can specify the name of the port next to the server name as in "servername.company.com:27" assuming that your ftp is running on port 27

  You use local or remote agent. It will also make a difference, because maybe remote agent cannot see this IP.
  Another point to consider is that your ftp could be a secure ftp, in this case, you need to use another tool - odiSFtpGet

  Try using the ftp commands in the command prompt Windows.

  Get the means to get the files from the FTP server.
  Put the means you want to place the files on the FTP server.

• Sample oc4j - ra.xml for the adapter FTP to transfer files remotely

  Please provide a sample file and the detailed description of the oc4j - ra.xml for FTP adapter.
  
  < location connector-factory = name of the connector "ist/Ftp/FtpAdapter" = "FTP adapter" >
  < config-property name = "host" value="usunnbf29.us.oracle.com"/ >
  < name of config-property = 'port' value = "21" / >
  < name of config-property = value "username" = "ftp" / >
  < config-property name = "password" value = "password" / >
  < config-property name = "useFtps" value = "true" / >
  < config-property name = "walletLocation" value="D:\wallet\ewallet.p12"/ >
  < config-property name = "walletPassword" value = "welcome1" / >
  < config-property name = "channelMask" value = "both" / >
  < config-property name = "securePort" value = "990" / >
  < / connector-factory >
  
  
  I use windows as the source and target server. Runtime runs on different windows machine. What are the values that are required for the remote server... namely, walletLocation, walletPassword.
  
  I changed the value of the location, host (ipaddress), username (windows login) and password(windows password) only. After restarting the server, files did not move away.
  Make the need for the directory to share, files must be given permission. I did all these things, but no avail.
  
  Please help.
  
  Thank you

  Check this box:

  http://www.Oracle.com/technology/products/integration/adapters/PDF/Adapter_TN_002_FTPAdapter_SecureFTP.PDF

  http://download.Oracle.com/docs/CD/B31018_01/Relnotes.1013/Relnotes/adapters.htm

  Hope this will guide you.

  Marc
  http://orasoa.blogspot.com

• HPDM: HPDM replace self signed SSL certificates for server HDPM and master repository

  I am trying to replace the automatically generated self-signed certificates (issued to DM) issued by DM server HDPM and master repository.  I'm NOT arbitration FTPS, HTTPS embedded HPDM or CERT Thin Client Agent server.

  I already have CERT for the installation of our own internal domain CA for FTPS in IIS and the built-in Apache HTTPS server.  These work properly and pass tests of repository for both protocols.  I also have questions for Thin Clients of our internal CA very well.

  I am interested in the HPDM real server cert and cert master repository. These are generated automatically when the two services start.  They use a very weak MD5 hash and key RSA 1024.  I can't find any documentation around that, with the exception of troubleshooting, in which you can remove these certificates restart services and they will be regenerated.

  Here are the paths certs\key
  HPDM % install Path%\MasterRepositoryController\Controller.crt (Cert repository)

  HPDM % install Path%\MasterRepositoryController\Controller.key (repository key)

  HPDM % install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)

  HPDM % install Path%\Server\Bin\hpdmskey.keystore (Both HPDM server and repository Certs and keys) (not sure what format it is in.  It is not PEM and P12 ok I can say)

  There are also some HPDM % install Path%\Server\bin\hpdmcert.key.  Don't know what it is.  It's the key to the server HPDM but deleting it does nothing and it is never re auto generated in one of my tests.

  I am able to replace the Controller.crt and keys with my own files CA internal those emitted very well.  The service started and no errors occur.  However if I replace the Client.cert (HPDM Server Cert) with my own service will start but there are Socket SSL errors in repository logs and the HPDM server could not connect to the master repository. I have no idea where the key file is supposed to be for HPDM Server Cert.

  Can anyone help with this?  I can't find the configuration files for the service to generate their own certificates.  If I did I would try at least to change the config to do not use MD5.

  Hello

  These certiricates between HPDM server and MRC are not designed for customizable. Please submite one scenario if you have concerns of security on it.

  Just for info:

  hpdmcert. Key is for communication between the server HPDM and gateway HPDM

  hpdmskey.keystore is for communication between the server HPDM and MRC

  server_keystore is for the commhucation between HPDM server and the Console HPDM

• FTPS (ftp over ssl) to the master repository connection. HPDM

  Hello

  I'm trying to configure the MR for FTPS (ftp with ssl). When I test the connection in the repository editor he fails to connect with the current FTP connection. The shared connection is successful.

  I can successfully connect with the Filezilla client for the FTP site.

  The Filezilla give a warning of a certificate not signed, when I click ok it is properly connected.

  Configuration information:

  Site - FTP is hosted on hpdm (2012 R2 server) with IIS server.

  -certificate of self-signed

  -port 21

  Can someone tell me how to configure the repository Editor to connect to the ftp site?

  Kind regards

  Van Beek

  Never mind.

  I found a white paper of the connection to configure FTPS

  HPDM wants you to use port 990 for ftps and not 21.

  FTP://FTP.HP.com/pub/hpdm/documentation/whitepapers/4.6/WP_HPDM4.6_FTP_Configuration.PDF