Sample oc4j - ra.xml for the adapter FTP to transfer files remotely

Similar Questions

• Where to download the driver for the adapter Bluetooth BT2 SD for Win7 x 64?

  Hello

  where can I download the drivers for the adapter Bluetooth BT2 SD for Win7 x 64?

  Thank you.

  You can download the BT stack from Toshiba BT page:
  http://APS2.toshiba-tro.de/Bluetooth/

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Sampling frequency of adjustment for the analog output of sine

  Hello

  I tried to do something very simple: using an analog output card PCI 6221 to produce a frequency 50 Hz sine curve. For this I used a Vi to create a curve sinus and different screws DAQmx. But I have trouble understanding the principle of virtual channel and I think I do an error of adjustment of the sampling frequency and number of samples: once for the vi, second time sine "DAQmx - synchronization. Can I use the same values for both of these screws?

  On my oscilloscope, with frequency = 50 Hz and the sampling frequency = 1 kHz, I get a null signal. Then according to two values, I'm differently evaluated signals. For example, with f = 1 Hz and sr = 10 kHz, a frequency 0.7 Hz sinus.

  Make sure that the start for the analog input task occurs after the analog output.  By plugging in the wrong thread to an analogue output start task first, and then to the start task, you guarantee that the AI cannot start until after the startup of the AO.

• The adapter FTP - synchronous reading - native format

  We could think about what an FTP connection would be simple. I did a bunch of 'puts' without difficulty; I can't get a sync read to work AT ALL.

  What the hell is wrong with this mess anyway? This should be simple.

  Here's my WSDL... What's not here?

  < wsdl:definitions

  name = "getRawFile".

  " targetNamespace = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/getRawFile "" "

  ' xmlns:jca = ' http://xmlns.Oracle.com/pcbpel/WSDL/JCA/ "" "

  ' xmlns:wsdl = ' http://schemas.xmlsoap.org/wsdl/ "

  ' xmlns:tns = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/getRawFile "" "

  ' xmlns:imp1 = ' http://targetNamespace.com/getRawFile "

  ' xmlns:plt = ' http://schemas.xmlsoap.org/ws/2003/05/partner-link/ "

  >

  < plt:partnerLinkType name = "SynchRead_plt" >

  < plt:role name = "SynchRead_role" >

  < name plt:portType = "tns:SynchRead_ptt" / >

  < / plt:role >

  < / plt:partnerLinkType >

  WSDL: < types >

  " < schema targetNamespace = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/getRawFile "" "

                xmlns=" http://www.w3.org/2001/XMLSchema " >

  " < import namespace = ' http://targetNamespace.com/getRawFile "schemaLocation = xsd/F17QBA1_1.xsd""/ >

  < element name = "empty" > < complexType / > < / item >

  < / schema >

  < / wsdl: types >

  < name of the WSDL: message = "Empty_msg" >

  < name of wsdl: part = element 'Empty' = "tns:empty" / >

  < / wsdl: message >

  < name of the WSDL: message = "SynchRead_msg" >

  < name of wsdl: part = element "body" = "imp1:HUDCaseList" / >

  < / wsdl: message >

  < name of wsdl: portType = "SynchRead_ptt" >

  < name of wsdl: Operation = "SynchRead" >

  < message wsdl: Input = "tns:Empty_msg" / >

  < message wsdl: output = "tns:SynchRead_msg" / >

  < / wsdl: Operation >

  < / wsdl: portType >

  < / wsdl:definitions >

  Here's my jca

  < name of the adapter-config = adapter "getRawFile" = "FTP adapter" wsdlLocation = "getRawFile.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = "ist/Ftp/FtpAdapterP011" / >

  < endpoint-interaction portType = operation "SynchRead_ptt" = "SynchRead" >

  < className = "oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec interaction-spec" >

  < property name = "DeleteFile" value = "true" / >

  < property name = "PhysicalDirectory" value = "/ opt/oracle/work/domains/dev_total_vr_domain/TOTAL" / >

  < property name = "FileName" value = "F17QBA1" / >

  < property name = "File Type" value = "ascii" / >

  < / interaction-spec >

  < / interaction of endpoint >

  < / adapter-config >

  The answer is: PhysicalDirectory designates the directory where you get the file, not where it is stored.

• IN XML for the loop

  Hello
  Model RTF PO, I try to display the short text and long text for each PO. But I'm unable to display multiple short and long texts for each line number. I can view only the first short and long text for each line number. How do I show all the. The seeds IN. model does. Here's my code and XML
  
  
  for short text (short_text is in the same column that line_num is the rich TEXT table)
  
  <? for each: LINES_ROW? > <? type: LINE_NUM; ' ascending '; type_donnees = "number"? >
  
  <? LINE_NUM? > <? date format: NEED_BY_DATE; "DD-MMM-YYYY'? > <? LINE_AMOUNT? >
  <? ITEM_DESCRIPTION? >
  <? SHORT_TEXT? >
  
  <? end foreach? >
  
  output is
  No. 1 line
  short attachment test
  Line num 2
  short text 1
  
  output must be
  No. 1 line
  short attachment test
  Attachment 4 t
  Line num 2
  short text 1
  short text 2
  
  Long text
  <? If: PO_DATA/LINE_ATTACHMENTS/TEXT! ='' ? >
  <? for each: LINES_ROW? > <? type: LINE_NUM; ' ascending '; type_donnees = "number"? >
  <? If: LINE_NUM! ='' ? > <? Concat ("' line number", LINE_NUM)? > <? end if? >
  <? variable@InContext:PoLnID;' PO_LINE_ID'? >
  <? / PO_DATA/LINE_ATTACHMENTS/ID [child::text () = $PoLnID] / preceding - sibling:TEXT [1]? >
  
  <? end foreach? >
  <? end if? >
  
  output is
  No. 1 line
  attachment of long text which is 2nd ote
  Line num 2
  long text 1
  
  output must be
  No. 1 line
  attachment of long text which is 2nd ote
  see this 5th long accessory
  Line num 2
  long text 1
  long text 2
  
  
  
  Here is an example of XML code
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < PO_DATA >
  STANDARD of < TYPE_LOOKUP_CODE > < / TYPE_LOOKUP_CODE >
  < > 24687 SEGMENT1 < / SEGMENT1 >
  < REVISION_NUM > 0 < / REVISION_NUM >
  < PRINT_COUNT > 3 < / PRINT_COUNT >
  < CREATION_DATE > 29 April 2009 14:28:52 < / CREATION_DATE >
  < NOTE_TO_VENDOR > This is a good test for the conditions window provider command < / NOTE_TO_VENDOR >
  Sanjay < DOCUMENT_BUYER_FIRST_NAME > < / DOCUMENT_BUYER_FIRST_NAME >
  Kumar < DOCUMENT_BUYER_LAST_NAME > < / DOCUMENT_BUYER_LAST_NAME >
  < DOCUMENT_BUYER_AGENT_ID > 8756 < / DOCUMENT_BUYER_AGENT_ID >
  < CANCEL_FLAG > N < / CANCEL_FLAG >
  < CONFIRMING_ORDER_FLAG > N < / CONFIRMING_ORDER_FLAG >
  < ACCEPTANCE_REQUIRED_FLAG > N < / ACCEPTANCE_REQUIRED_FLAG >
  USD < CURRENCY_CODE > < / CURRENCY_CODE >
  < CURRENCY_NAME > United States dollar < / CURRENCY_NAME >
  < PAYMENT_TERMS > NET 30 < / PAYMENT_TERMS >
  < > 1244 CUSTOMER_NUM < / CUSTOMER_NUM >
  RR10 < VENDOR_NUM > < / VENDOR_NUM >
  < $vendor_name > OFFICE DEPOT < / $vendor_name >
  < VENDOR_ADDRESS_LINE1 > B.P. 31533 < / VENDOR_ADDRESS_LINE1 >
  HARTFORD < VENDOR_CITY > < / VENDOR_CITY >
  < VENDOR_STATE > CT < / VENDOR_STATE >
  < VENDOR_POSTAL_CODE > 06150 - 1533 < / VENDOR_POSTAL_CODE >
  < SHIP_TO_LOCATION_ID > 88 < / SHIP_TO_LOCATION_ID >
  < SHIP_TO_LOCATION_NAME > US CORPORATE HDQTRS < / SHIP_TO_LOCATION_NAME >
  < SHIP_TO_ADDRESS_LINE1 > JFK 123 RD < / SHIP_TO_ADDRESS_LINE1 >
  Broadway, WA 02421 < SHIP_TO_ADDRESS_INFO > < / SHIP_TO_ADDRESS_INFO >
  the < SHIP_TO_COUNTRY > United States < / SHIP_TO_COUNTRY >
  < BILL_TO_LOCATION_ID > 88 < / BILL_TO_LOCATION_ID >
  < BILL_TO_LOCATION_NAME > US CORPORATE HDQTRS < / BILL_TO_LOCATION_NAME >
  < BILL_TO_ADDRESS_LINE1 > JFK 123 RD < / BILL_TO_ADDRESS_LINE1 >
  Broadway, WA 02421 < BILL_TO_ADDRESS_INFO > < / BILL_TO_ADDRESS_INFO >
  the United States < BILL_TO_COUNTRY > < / BILL_TO_COUNTRY >
  MY < ATTRIBUTE1 > < / ATTRIBUTE1 >
  < VENDOR_SITE_ID > 9983 < / VENDOR_SITE_ID >
  < PO_HEADER_ID > 27162 < / PO_HEADER_ID >
  < APPROVED_FLAG > N < / APPROVED_FLAG >
  < > 826 VENDOR_ID < / VENDOR_ID >
  < ORG_ID > 29 < / ORG_ID >
  < COMMENT > IN. test to test the template < / COMMENT >
  < FIRM_STATUS_LOOKUP_CODE > N < / FIRM_STATUS_LOOKUP_CODE >
  < FROZEN_FLAG > N < / FROZEN_FLAG >
  < > 3349 CREATED_BY < / CREATED_BY >
  < TERMS_ID > 10001 < / TERMS_ID >
  < RATE_DATE > 29 April 2009 00:00:00 < / RATE_DATE >
  < AUTHORIZATION_STATUS > N < / AUTHORIZATION_STATUS >
  < NOTE_TO_RECEIVER > This is a purchase order of the receiver of window conditions test < / NOTE_TO_RECEIVER >
  < LAST_UPDATE_DATE > 29 April 2009 14:30:52 < / LAST_UPDATE_DATE >
  < LAST_UPDATED_BY > 3349 < / LAST_UPDATED_BY >
  < SUMMARY_FLAG > N < / SUMMARY_FLAG >
  < ENABLED_FLAG > Y < / ENABLED_FLAG >
  < LAST_UPDATE_LOGIN > 1250381 < / LAST_UPDATE_LOGIN >
  < SUPPLY_AGREEMENT_FLAG > N < / SUPPLY_AGREEMENT_FLAG >
  < PENDING_SIGNATURE_FLAG > N < / PENDING_SIGNATURE_FLAG >
  < OU_NAME > ABC LTD. < / OU_NAME >
  < OU_ADDR1 > JFK 123 RD < / OU_ADDR1 >
  Broadway < OU_TOWN_CITY > < / OU_TOWN_CITY >
  WA < OU_REGION2 > < / OU_REGION2 >
  < OU_POSTALCODE > 44421 < / OU_POSTALCODE >
  the United States < OU_COUNTRY > < / OU_COUNTRY >
  < BUYER_ADDRESS_LINE1 > JFK 123 RD < / BUYER_ADDRESS_LINE1 >
  Broadway, WA 44421 < BUYER_CITY_STATE_ZIP > < / BUYER_CITY_STATE_ZIP >
  < BUYER_CONTACT_PHONE > 322-445-4533 < / BUYER_CONTACT_PHONE >
  < > 6,000.00 TOTAL_AMOUNT < / TOTAL_AMOUNT >
  the United States < BUYER_COUNTRY > < / BUYER_COUNTRY >
  < DOCUMENT_CREATION_METHOD > ENTER_PO < / DOCUMENT_CREATION_METHOD >
  Purchase Standard < DOCUMENT_TYPE > order < / DOCUMENT_TYPE >
  < COVER_MESSAGE > This document has important legal consequences. < / COVER_MESSAGE >
  < AMMENDMENT_MESSAGE > This document has important legal consequences.
  < / AMMENDMENT_MESSAGE >
  D < TEST_FLAG > < / TEST_FLAG >
  < DIST_SHIPMENT_COUNT > 1 < / DIST_SHIPMENT_COUNT >
  Standard purchase order < DocumentName > 24687, 0 < / DocumentName >
  F < SIGNED > < / SIGNED >
  < AMENDMENT_PROFILE > Y < / AMENDMENT_PROFILE >
  < WITH_TERMS > N < / WITH_TERMS >
  < IS_ATTACHED_DOC > Y < / IS_ATTACHED_DOC >
  < MESSAGE >
  < MESSAGE_ROW >
  < MESSAGE > PO_FO_AGREEMENT_CANCELED < / MESSAGE >
  < TEXT > this contract CANCELLED on < / TEXT >
  < / MESSAGE_ROW >
  < MESSAGE_ROW >
  < MESSAGE > PO_WF_NOTIF_VENDOR_NO < / MESSAGE >
  SupplierID < TEXT > < / TEXT >
  < / MESSAGE_ROW >
  < / MESSAGE >
  < HEADER_SHORT_TEXT >
  < / HEADER_SHORT_TEXT >
  <>LINES
  < LINES_ROW >
  < LINE_NUM > 1 < / LINE_NUM >
  < ITEM_DESCRIPTION > test in. < / ITEM_DESCRIPTION >
  < CANCEL_FLAG > N < / CANCEL_FLAG >
  < NOTE_TO_VENDOR > This is a test in. do not ship. < / NOTE_TO_VENDOR >
  Unit of < UNIT_MEAS_LOOKUP_CODE > < / UNIT_MEAS_LOOKUP_CODE >
  AMOUNT of < ORDER_TYPE_LOOKUP_CODE > < / ORDER_TYPE_LOOKUP_CODE >
  N < ATTRIBUTE1 > < / ATTRIBUTE1 >
  < UNIT_PRICE > 5000 < / UNIT_PRICE >
  < QUANTITY > 1 < / QUANTITY >
  < PO_HEADER_ID > 27162 < / PO_HEADER_ID >
  < PO_LINE_ID > 53995 < / PO_LINE_ID >
  < ORG_ID > 29 < / ORG_ID >
  < UNORDERED_FLAG > N < / UNORDERED_FLAG >
  < CLOSED_FLAG > N < / CLOSED_FLAG >
  < TAXABLE_FLAG > N < / TAXABLE_FLAG >
  < CAPITAL_EXPENSE_FLAG > N < / CAPITAL_EXPENSE_FLAG >
  < NEGOTIATED_BY_PREPARER_FLAG > N < / NEGOTIATED_BY_PREPARER_FLAG >
  < LAST_UPDATE_DATE > 29 April 2009 14:29:36 < / LAST_UPDATE_DATE >
  < LAST_UPDATED_BY > 3349 < / LAST_UPDATED_BY >
  < LINE_TYPE_ID > 1000 < / LINE_TYPE_ID >
  < LAST_UPDATE_LOGIN > 1250381 < / LAST_UPDATE_LOGIN >
  < CREATION_DATE > 29 April 2009 14:28:52 < / CREATION_DATE >
  < > 3349 CREATED_BY < / CREATED_BY >
  < Stuff > 224 < / stuff >
  < ALLOW_PRICE_OVERRIDE_FLAG > N < / ALLOW_PRICE_OVERRIDE_FLAG >
  < LIST_PRICE_PER_UNIT > 5000 < / LIST_PRICE_PER_UNIT >
  AMOUNT of < LINE_TYPE > < / LINE_TYPE >
  GOODS of < PURCHASE_BASIS > < / PURCHASE_BASIS >
  < LINE_AMOUNT > 5 000,00 < / LINE_AMOUNT >
  < MANUAL_PRICE_CHANGE_FLAG > N < / MANUAL_PRICE_CHANGE_FLAG >
  AMOUNT of < MATCHING_BASIS > < / MATCHING_BASIS >
  < PRICE_DIFF >
  < / PRICE_DIFF >
  * < LINE_SHORT_TEXT > *.
  * < LINE_SHORT_TEXT_ROW > *.
  * < PO_LINE_ID > 53995 < / PO_LINE_ID > *.
  * < test SHORT_TEXT > for the short attachment < / SHORT_TEXT > *.
  * < / LINE_SHORT_TEXT_ROW > *.
  * < LINE_SHORT_TEXT_ROW > *.
  * < PO_LINE_ID > 53995 < / PO_LINE_ID > *.
  * < SHORT_TEXT > 4th attachment < / SHORT_TEXT > *.
  * < / LINE_SHORT_TEXT_ROW > *.
  * < / LINE_SHORT_TEXT > *.
  < LINE_LOCATIONS >
  < LINE_LOCATIONS_ROW >
  < SHIPMENT_NUM > 1 < / SHIPMENT_NUM >
  < end_date > 15 May 2009 00:00:00 < / end_date >
  < QUANTITY > 1 < / QUANTITY >
  < PRICE_OVERRIDE > 5000 < / PRICE_OVERRIDE >
  < QUANTITY_CANCELLED > 0 < / QUANTITY_CANCELLED >
  < CANCEL_FLAG > N < / CANCEL_FLAG >
  < TAXABLE_FLAG > N < / TAXABLE_FLAG >
  < PO_HEADER_ID > 27162 < / PO_HEADER_ID >
  < PO_LINE_ID > 53995 < / PO_LINE_ID >
  < LINE_LOCATION_ID > 53678 < / LINE_LOCATION_ID >
  STANDARD of < SHIPMENT_TYPE > < / SHIPMENT_TYPE >
  < RECEIVING_ROUTING_ID > 3 < / RECEIVING_ROUTING_ID >
  < ACCRUE_ON_RECEIPT_FLAG > N < / ACCRUE_ON_RECEIPT_FLAG >
  < ORG_ID > 29 < / ORG_ID >
  < RECEIPT_REQUIRED_FLAG > N < / RECEIPT_REQUIRED_FLAG >
  < QTY_RCV_TOLERANCE > 10 < / QTY_RCV_TOLERANCE >
  WARNING < QTY_RCV_EXCEPTION_CODE > < / QTY_RCV_EXCEPTION_CODE >
  < ENFORCE_SHIP_TO_LOCATION_CODE > NO < / ENFORCE_SHIP_TO_LOCATION_CODE >
  < ALLOW_SUBSTITUTE_RECEIPTS_FLAG > N < / ALLOW_SUBSTITUTE_RECEIPTS_FLAG >
  < DAYS_EARLY_RECEIPT_ALLOWED > 5 < / DAYS_EARLY_RECEIPT_ALLOWED >
  < DAYS_LATE_RECEIPT_ALLOWED > 5 < / DAYS_LATE_RECEIPT_ALLOWED >
  WARNING < RECEIPT_DAYS_EXCEPTION_CODE > < / RECEIPT_DAYS_EXCEPTION_CODE >
  < INVOICE_CLOSE_TOLERANCE > 2 < / INVOICE_CLOSE_TOLERANCE >
  < RECEIVE_CLOSE_TOLERANCE > 100 < / RECEIVE_CLOSE_TOLERANCE >
  < SHIP_TO_ORGANIZATION_ID > 208 < / SHIP_TO_ORGANIZATION_ID >
  OPEN < CLOSED_CODE > < / CLOSED_CODE >
  < LAST_ACCEPT_DATE > 9 May 2009 00:00:00 < / LAST_ACCEPT_DATE >
  < ENCUMBERED_FLAG > N < / ENCUMBERED_FLAG >
  < FIRM_STATUS_LOOKUP_CODE > N < / FIRM_STATUS_LOOKUP_CODE >
  < LAST_UPDATE_DATE > 29 April 2009 14:31:31 < / LAST_UPDATE_DATE >
  < LAST_UPDATED_BY > 3349 < / LAST_UPDATED_BY >
  < LAST_UPDATE_LOGIN > 1250381 < / LAST_UPDATE_LOGIN >
  < CREATION_DATE > 29 April 2009 14:28:53 < / CREATION_DATE >
  < > 3349 CREATED_BY < / CREATED_BY >
  < QUANTITY_RECEIVED > 0 < / QUANTITY_RECEIVED >
  < QUANTITY_ACCEPTED > 0 < / QUANTITY_ACCEPTED >
  < QUANTITY_REJECTED > 0 < / QUANTITY_REJECTED >
  < QUANTITY_BILLED > 0 < / QUANTITY_BILLED >
  Unit of < UNIT_MEAS_LOOKUP_CODE > < / UNIT_MEAS_LOOKUP_CODE >
  < TAX_USER_OVERRIDE_FLAG > N < / TAX_USER_OVERRIDE_FLAG >
  < MATCH_OPTION > P < / MATCH_OPTION >
  < CALCULATE_TAX_FLAG > Y < / CALCULATE_TAX_FLAG >
  < NOTE_TO_RECEIVER > This is a note in the receiver shipments < / NOTE_TO_RECEIVER >
  < AMOUNT > 5 000,00 < / AMOUNT >
  < SHIP_TO_LOCATION_ID > 88 < / SHIP_TO_LOCATION_ID >
  < SHIP_TO_LOCATION_NAME > US CORPORATE HDQTRS < / SHIP_TO_LOCATION_NAME >
  < SHIP_TO_ADDRESS_LINE1 > JFK 123 RD < / SHIP_TO_ADDRESS_LINE1 >
  Broadway, WA 02421 < SHIP_TO_ADDRESS_INFO > < / SHIP_TO_ADDRESS_INFO >
  the < SHIP_TO_COUNTRY > United States < / SHIP_TO_COUNTRY >
  < NEED_BY_DATE > 15 May 2009 00:00:00 < / NEED_BY_DATE >
  < PROMISED_DATE > 4 May 2009 00:00:00 < / PROMISED_DATE >
  < LINE_LOC_SHORT_TEXT >
  < / LINE_LOC_SHORT_TEXT >
  < DISTRIBUTION >
  < DISTRIBUTIONS_ROW >
  STANDARD < DISTRIBUTION_TYPE > < / DISTRIBUTION_TYPE >
  < ACCRUE_ON_RECEIPT_FLAG > N < / ACCRUE_ON_RECEIPT_FLAG >
  < ORG_ID > 29 < / ORG_ID >
  COSTS of < DESTINATION_TYPE_CODE > < / DESTINATION_TYPE_CODE >
  < DESTINATION_ORGANIZATION_ID > 208 < / DESTINATION_ORGANIZATION_ID >
  < ACCRUAL_ACCOUNT_ID > 1037 < / ACCRUAL_ACCOUNT_ID >
  < VARIANCE_ACCOUNT_ID > 22148 < / VARIANCE_ACCOUNT_ID >
  < PREVENT_ENCUMBRANCE_FLAG > N < / PREVENT_ENCUMBRANCE_FLAG >
  < PO_DISTRIBUTION_ID > 55228 < / PO_DISTRIBUTION_ID >
  < LAST_UPDATE_DATE > 29 April 2009 14:32:23 < / LAST_UPDATE_DATE >
  < LAST_UPDATED_BY > 3349 < / LAST_UPDATED_BY >
  < PO_HEADER_ID > 27162 < / PO_HEADER_ID >
  < PO_LINE_ID > 53995 < / PO_LINE_ID >
  < LINE_LOCATION_ID > 53678 < / LINE_LOCATION_ID >
  < SET_OF_BOOKS_ID > 25 < / SET_OF_BOOKS_ID >
  < CODE_COMBINATION_ID > 22148 < / CODE_COMBINATION_ID >
  < QUANTITY_ORDERED > 1 < / QUANTITY_ORDERED >
  < LAST_UPDATE_LOGIN > 1250381 < / LAST_UPDATE_LOGIN >
  < CREATION_DATE > 29 April 2009 14:28:54 < / CREATION_DATE >
  < > 3349 CREATED_BY < / CREATED_BY >
  < QUANTITY_DELIVERED > 0 < / QUANTITY_DELIVERED >
  < QUANTITY_BILLED > 0 < / QUANTITY_BILLED >
  < QUANTITY_CANCELLED > 0 < / QUANTITY_CANCELLED >
  < DELIVER_TO_LOCATION_ID > 89 < / DELIVER_TO_LOCATION_ID >
  < DELIVER_TO_PERSON_ID > 5324 < / DELIVER_TO_PERSON_ID >
  < RATE_DATE > 29 April 2009 00:00:00 < / RATE_DATE >
  < ENCUMBERED_FLAG > N < / ENCUMBERED_FLAG >
  < RECOVERY_RATE > 0.00 < / RECOVERY_RATE >
  < TAX_RECOVERY_OVERRIDE_FLAG > N < / TAX_RECOVERY_OVERRIDE_FLAG >
  COSTS of < DESTINATION_CONTEXT > < / DESTINATION_CONTEXT >
  < DISTRIBUTION_NUM > 1 < / DISTRIBUTION_NUM >
  < CHARGE_ACCOUNT > 05-3002-7050-000-000 < / CHARGE_ACCOUNT >
  < FULL_NAME > Devine, Alison < / FULL_NAME >
  [email protected] < EMAIL_ADDRESS > < / EMAIL_ADDRESS >
  Karen < REQUESTER_DELIVER_FIRST_NAME > < / REQUESTER_DELIVER_FIRST_NAME >
  MY < REQUESTER_DELIVER_LAST_NAME > < / REQUESTER_DELIVER_LAST_NAME >
  < / DISTRIBUTIONS_ROW >
  < / DISTRIBUTION >
  < / LINE_LOCATIONS_ROW >
  < / LINE_LOCATIONS >
  < / LINES_ROW >
  < LINES_ROW >
  < LINE_NUM > 2 < / LINE_NUM >
  < ITEM_DESCRIPTION > TEST IN. < / ITEM_DESCRIPTION >
  < CANCEL_FLAG > N < / CANCEL_FLAG >
  Unit of < UNIT_MEAS_LOOKUP_CODE > < / UNIT_MEAS_LOOKUP_CODE >
  AMOUNT of < ORDER_TYPE_LOOKUP_CODE > < / ORDER_TYPE_LOOKUP_CODE >
  N < ATTRIBUTE1 > < / ATTRIBUTE1 >
  < UNIT_PRICE > 1000 < / UNIT_PRICE >
  < QUANTITY > 1 < / QUANTITY >
  < PO_HEADER_ID > 27162 < / PO_HEADER_ID >
  < PO_LINE_ID > 54015 < / PO_LINE_ID >
  < ORG_ID > 29 < / ORG_ID >
  < UNORDERED_FLAG > N < / UNORDERED_FLAG >
  < CLOSED_FLAG > N < / CLOSED_FLAG >
  < TAXABLE_FLAG > N < / TAXABLE_FLAG >
  < CAPITAL_EXPENSE_FLAG > N < / CAPITAL_EXPENSE_FLAG >
  < NEGOTIATED_BY_PREPARER_FLAG > N < / NEGOTIATED_BY_PREPARER_FLAG >
  < LAST_UPDATE_DATE > 30 April 2009 13:52:26 < / LAST_UPDATE_DATE >
  < LAST_UPDATED_BY > 3349 < / LAST_UPDATED_BY >
  < LINE_TYPE_ID > 1000 < / LINE_TYPE_ID >
  < LAST_UPDATE_LOGIN > 1251236 < / LAST_UPDATE_LOGIN >
  < CREATION_DATE > 30 April 2009 13:52:26 < / CREATION_DATE >
  < > 3349 CREATED_BY < / CREATED_BY >
  < Stuff > 224 < / stuff >
  < ALLOW_PRICE_OVERRIDE_FLAG > N < / ALLOW_PRICE_OVERRIDE_FLAG >
  < LIST_PRICE_PER_UNIT > 1000 < / LIST_PRICE_PER_UNIT >
  AMOUNT of < LINE_TYPE > < / LINE_TYPE >
  GOODS of < PURCHASE_BASIS > < / PURCHASE_BASIS >
  < LINE_AMOUNT > 1 000,00 < / LINE_AMOUNT >
  < MANUAL_PRICE_CHANGE_FLAG > N < / MANUAL_PRICE_CHANGE_FLAG >
  AMOUNT of < MATCHING_BASIS > < / MATCHING_BASIS >
  < PRICE_DIFF >
  < / PRICE_DIFF >
  * < LINE_SHORT_TEXT > *.
  * < LINE_SHORT_TEXT_ROW > *.
  * < PO_LINE_ID > 54015 < / PO_LINE_ID > *.
  * < SHORT_TEXT > 1 short text < / SHORT_TEXT > *.
  * < / LINE_SHORT_TEXT_ROW > *.
  * < LINE_SHORT_TEXT_ROW > *.
  * < PO_LINE_ID > 54015 < / PO_LINE_ID > *.
  * < SHORT_TEXT > 2 short text < / SHORT_TEXT > *.
  * < / LINE_SHORT_TEXT_ROW > *.
  * < / LINE_SHORT_TEXT > *.
  < LINE_LOCATIONS >
  < LINE_LOCATIONS_ROW >
  < SHIPMENT_NUM > 1 < / SHIPMENT_NUM >
  < end_date > 7 May 2009 00:00:00 < / end_date >
  < QUANTITY > 1 < / QUANTITY >
  < PRICE_OVERRIDE > 1000 < / PRICE_OVERRIDE >
  < QUANTITY_CANCELLED > 0 < / QUANTITY_CANCELLED >
  < CANCEL_FLAG > N < / CANCEL_FLAG >
  < TAXABLE_FLAG > N < / TAXABLE_FLAG >
  < PO_HEADER_ID > 27162 < / PO_HEADER_ID >
  < PO_LINE_ID > 54015 < / PO_LINE_ID >
  < LINE_LOCATION_ID > 53698 < / LINE_LOCATION_ID >
  STANDARD of < SHIPMENT_TYPE > < / SHIPMENT_TYPE >
  < RECEIVING_ROUTING_ID > 3 < / RECEIVING_ROUTING_ID >
  < ACCRUE_ON_RECEIPT_FLAG > N < / ACCRUE_ON_RECEIPT_FLAG >
  < ORG_ID > 29 < / ORG_ID >
  < RECEIPT_REQUIRED_FLAG > N < / RECEIPT_REQUIRED_FLAG >
  < QTY_RCV_TOLERANCE > 10 < / QTY_RCV_TOLERANCE >
  WARNING < QTY_RCV_EXCEPTION_CODE > < / QTY_RCV_EXCEPTION_CODE >
  < ENFORCE_SHIP_TO_LOCATION_CODE > NO < / ENFORCE_SHIP_TO_LOCATION_CODE >
  < ALLOW_SUBSTITUTE_RECEIPTS_FLAG > N < / ALLOW_SUBSTITUTE_RECEIPTS_FLAG >
  < DAYS_EARLY_RECEIPT_ALLOWED > 5 < / DAYS_EARLY_RECEIPT_ALLOWED >
  < DAYS_LATE_RECEIPT_ALLOWED > 5 < / DAYS_LATE_RECEIPT_ALLOWED >
  WARNING < RECEIPT_DAYS_EXCEPTION_CODE > < / RECEIPT_DAYS_EXCEPTION_CODE >
  < INVOICE_CLOSE_TOLERANCE > 2 < / INVOICE_CLOSE_TOLERANCE >
  < RECEIVE_CLOSE_TOLERANCE > 100 < / RECEIVE_CLOSE_TOLERANCE >
  < SHIP_TO_ORGANIZATION_ID > 208 < / SHIP_TO_ORGANIZATION_ID >
  OPEN < CLOSED_CODE > < / CLOSED_CODE >
  < LAST_ACCEPT_DATE > 11 May 2009 00:00:00 < / LAST_ACCEPT_DATE >
  < ENCUMBERED_FLAG > N < / ENCUMBERED_FLAG >
  < FIRM_STATUS_LOOKUP_CODE > N < / FIRM_STATUS_LOOKUP_CODE >
  < LAST_UPDATE_DATE > 30 April 2009 13:53:11 < / LAST_UPDATE_DATE >
  < LAST_UPDATED_BY > 3349 < / LAST_UPDATED_BY >
  < LAST_UPDATE_LOGIN > 1251236 < / LAST_UPDATE_LOGIN >
  < CREATION_DATE > 30 April 2009 13:52:27 < / CREATION_DATE >
  < > 3349 CREATED_BY < / CREATED_BY >
  < QUANTITY_RECEIVED > 0 < / QUANTITY_RECEIVED >
  < QUANTITY_ACCEPTED > 0 < / QUANTITY_ACCEPTED >
  < QUANTITY_REJECTED > 0 < / QUANTITY_REJECTED >
  < QUANTITY_BILLED > 0 < / QUANTITY_BILLED >
  Unit of < UNIT_MEAS_LOOKUP_CODE > < / UNIT_MEAS_LOOKUP_CODE >
  < TAX_USER_OVERRIDE_FLAG > N < / TAX_USER_OVERRIDE_FLAG >
  < MATCH_OPTION > P < / MATCH_OPTION >
  < CALCULATE_TAX_FLAG > Y < / CALCULATE_TAX_FLAG >
  < NOTE_TO_RECEIVER > NOT for RECEIVER in shipme < / NOTE_TO_RECEIVER >
  < AMOUNT > 1 000,00 < / AMOUNT >
  < SHIP_TO_LOCATION_ID > 88 < / SHIP_TO_LOCATION_ID >
  < SHIP_TO_LOCATION_NAME > US HDQTRS < / SHIP_TO_LOCATION_NAME >
  < SHIP_TO_ADDRESS_LINE1 > JFK 123 RD < / SHIP_TO_ADDRESS_LINE1 >
  Broadway, WA 53411 < SHIP_TO_ADDRESS_INFO > < / SHIP_TO_ADDRESS_INFO >
  the < SHIP_TO_COUNTRY > United States < / SHIP_TO_COUNTRY >
  < NEED_BY_DATE > 7 May 2009 00:00:00 < / NEED_BY_DATE >
  < PROMISED_DATE > 6 May 2009 00:00:00 < / PROMISED_DATE >
  < LINE_LOC_SHORT_TEXT >
  < / LINE_LOC_SHORT_TEXT >
  < DISTRIBUTION >
  < DISTRIBUTIONS_ROW >
  STANDARD < DISTRIBUTION_TYPE > < / DISTRIBUTION_TYPE >
  < ACCRUE_ON_RECEIPT_FLAG > N < / ACCRUE_ON_RECEIPT_FLAG >
  < ORG_ID > 29 < / ORG_ID >
  COSTS of < DESTINATION_TYPE_CODE > < / DESTINATION_TYPE_CODE >
  < DESTINATION_ORGANIZATION_ID > 208 < / DESTINATION_ORGANIZATION_ID >
  < ACCRUAL_ACCOUNT_ID > 1037 < / ACCRUAL_ACCOUNT_ID >
  < VARIANCE_ACCOUNT_ID > 3908 < / VARIANCE_ACCOUNT_ID >
  < PREVENT_ENCUMBRANCE_FLAG > N < / PREVENT_ENCUMBRANCE_FLAG >
  < PO_DISTRIBUTION_ID > 55248 < / PO_DISTRIBUTION_ID >
  < LAST_UPDATE_DATE > 30 April 2009 13:53:11 < / LAST_UPDATE_DATE >
  < LAST_UPDATED_BY > 3349 < / LAST_UPDATED_BY >
  < PO_HEADER_ID > 27162 < / PO_HEADER_ID >
  < PO_LINE_ID > 54015 < / PO_LINE_ID >
  < LINE_LOCATION_ID > 53698 < / LINE_LOCATION_ID >
  < SET_OF_BOOKS_ID > 25 < / SET_OF_BOOKS_ID >
  < CODE_COMBINATION_ID > 3908 < / CODE_COMBINATION_ID >
  < QUANTITY_ORDERED > 1 < / QUANTITY_ORDERED >
  < LAST_UPDATE_LOGIN > 1251236 < / LAST_UPDATE_LOGIN >
  < CREATION_DATE > 30 April 2009 13:53:11 < / CREATION_DATE >
  < > 3349 CREATED_BY < / CREATED_BY >
  < QUANTITY_DELIVERED > 0 < / QUANTITY_DELIVERED >
  < QUANTITY_BILLED > 0 < / QUANTITY_BILLED >
  < QUANTITY_CANCELLED > 0 < / QUANTITY_CANCELLED >
  < DELIVER_TO_LOCATION_ID > 89 < / DELIVER_TO_LOCATION_ID >
  < DELIVER_TO_PERSON_ID > 1308 < / DELIVER_TO_PERSON_ID >
  < RATE_DATE > 29 April 2009 00:00:00 < / RATE_DATE >
  < ENCUMBERED_FLAG > N < / ENCUMBERED_FLAG >
  < RECOVERY_RATE > 0.00 < / RECOVERY_RATE >
  < TAX_RECOVERY_OVERRIDE_FLAG > N < / TAX_RECOVERY_OVERRIDE_FLAG >
  COSTS of < DESTINATION_CONTEXT > < / DESTINATION_CONTEXT >
  < DISTRIBUTION_NUM > 1 < / DISTRIBUTION_NUM >
  < CHARGE_ACCOUNT > 01-3001-7050-000-000 < / CHARGE_ACCOUNT >
  < FULL_NAME > Green, Jan < / FULL_NAME >
  [email protected] < EMAIL_ADDRESS > < / EMAIL_ADDRESS >
  Jan < REQUESTER_DELIVER_FIRST_NAME > < / REQUESTER_DELIVER_FIRST_NAME >
  Green of < REQUESTER_DELIVER_LAST_NAME > < / REQUESTER_DELIVER_LAST_NAME >
  < / DISTRIBUTIONS_ROW >
  < / DISTRIBUTION >
  < / LINE_LOCATIONS_ROW >
  < / LINE_LOCATIONS >
  < / LINES_ROW >
  < / LINES >
  * < LINE_ATTACHMENTS > *.
  * < long text TEXT input > which is 2nd note. < / TEXT > *.
  * < ID > < /ID > 53995 *.
  * < TEXT > see this 5th long atta < / TEXT > *.
  * < ID > < /ID > 53995 *.
  * < TEXT > text 1 < / TEXT > *.
  * < ID > < /ID > 54015 *.
  * < TEXT > text 2 < / TEXT > *.
  * < ID > < /ID > 54015 *.
  * < / LINE_ATTACHMENTS > *.
  < ADDRESS_DETAILS >
  < ADDRESS_DETAILS_ROW >
  < > 88 location_id < / location_id >
  < ADDRESS_STYLE > US_GLB < / ADDRESS_STYLE >
  < ADDR_LABEL_1 > address line 1 < / ADDR_LABEL_1 >
  < ADDR_LABEL_2 > address line2 < / ADDR_LABEL_2 >
  < ADDR_LABEL_3 > address Line3 < / ADDR_LABEL_3 >
  City of < ADDR_LABEL_4 > < / ADDR_LABEL_4 >
  County of < ADDR_LABEL_5 > < / ADDR_LABEL_5 >
  State of < ADDR_LABEL_6 > < / ADDR_LABEL_6 >
  Code postal < ADDR_LABEL_7 > < / ADDR_LABEL_7 >
  Country of < ADDR_LABEL_8 > < / ADDR_LABEL_8 >
  Phone < ADDR_LABEL_9 > < / ADDR_LABEL_9 >
  Fax < ADDR_LABEL_10 > < / ADDR_LABEL_10 >
  Replacement of sales tax < ADDR_LABEL_11 > < / ADDR_LABEL_11 >
  < ADDR_LABEL_12 > Inside City Limits < / ADDR_LABEL_12 >
  < ADDR_DATA_1 > JFK 123 RD < / ADDR_DATA_1 >
  Broadway < ADDR_DATA_4 > < / ADDR_DATA_4 >
  WA < ADDR_DATA_6 > < / ADDR_DATA_6 >
  < ADDR_DATA_7 > 33444 < / ADDR_DATA_7 >
  < ADDR_DATA_8 > U.S. < / ADDR_DATA_8 >
  < ADDR_DATA_9 > 322-588-4534 < / ADDR_DATA_9 >
  < / ADDRESS_DETAILS_ROW >
  < / ADDRESS_DETAILS >
  < / PO_DATA >

  
    
  
   
  
  
  
  
    
  
  
  
  = 
  
  
  
  

  I get output

  1 15-MAY-2009 00:00:00 5,000.00
  test po
  test for short attachement
  4th attachment
  2 07-MAY-2009 00:00:00 1,000.00
  TEST PO
  short text 1
  short text 2
  Line Number 1
  long text attachment which is 2nd note.
  53995= long text attachment which is 2nd note.
  53995= see this 5th long atta
  Line Number 2
  long text 1
  54015= long text 1
  54015= long text 2
  

  Hope this helps

  Let me know if it helps ;)

• Provide read permissions to others for the weblogic/Managed Server log files

  Hello

  We want to give read access to others under linux for all the oracle weblogic logs including the journal .out file.

  We put 022 startweblogic.sh file. Set-aside are the output

  ----

  -rw - r - r-. 1 oracle oinstall 81586 Apr 15 22:43 access.log

  -rw - r - r-. 1 oracle oinstall 700087 Apr 15 22:45 DEV_Managed.log

  -rw - r-. 1 oracle oinstall 20553 Apr 15 22:49 DEV_Managed.out

  ----

  The only concern is its setting read other for access.log and DEV_Maanged.log but not for the log file of DEV_Managed.out

  Please suggest what file to edit.

  Thank you

  Mireille

  Hello

  Try to also change the umask 022 startNodeManager.sh file, and then restart nodemanager, then the managed server (to rotate the log .out file and create a new using the new umask)

  Kind regards

  White

• How can I add the Raw for the Canon EOS Rebel T6s file 5 Lightroom

  You want to know if there is a way to add the RAW file for the new Canon EOS Rebel T6s format to my desktop Mac version 5 of Lightroom.  All I found was the plugin cameraRaw 9 for Lightroom 6 that takes in charge of my camera. This does not work after that I have download and run the installation

  Thank you

  You will need to convert RAW to DNG for use in LR 5. Or you can go to LR 6. CameraRaw plugin is not relevant to LR. This is for Photoshop.

• Too big for the standard of encoding DVD file size - please advise

  Hi - I turned a 6-hour training session that went well.  I turned it to 1280 x 720.  For the web version, it will be no problem, as I'll just export to F4V.

  But I'm having a hard time finding for the DVD export settings.  I know that the drive is limited to 4.6 GB.  I broke up the sequences PPro CS4 30 minutes or more (some are smaller or larger than others).

  I first exported to QT, but found only 30 minutes export way too big (8 GB) and still it brought down to 2 GB, but which will only allow me to put 60 minutes on a single DVD vs the almost 2 hours I want to get on 1 disk.

  AVI is even worse.

  I know that widescreen is a larger size, so I'm willing to make standard NTSC, but I can just know that export by establishing in PPro CS4 allows you to do this work.

  Can someone advise me on this?

  Thank you.

  > Again and export of first MPEG-DVD works great. I exported it and then still chewed down from 60 minutes of finished video

  This seems really odd... to me... as looks that you encode twice, once in the body, and again in yet... but, if you are happy with the DVD, that's all that matters

  I'm still working with an audio track, from my camera, so no comment on your 2nd question

• SSD for the Scratch, Cache and swap file?

  Certainly, startup disk and RAID3 9-drive (7K 3000) the map of Areca-16. HDDs but... I was wondering, as I refine my construction, on the use of SSDS Strath, Cache and the pagefile.

  It seems to me that constant random access to these files (small for most), could be somewhat competing for overall throughput (they have been configured on the RAID3 alongside media and project). In an ideal configuration, it would be a practical or advantageous to have 2 x SATA3 SSDs RAID0 for Cache, the Scratch and the pagefile? (and whatever else reconstructible temporary structures). In addition, in order to move the traffic far form the Areaca PCIe lanes, would it be more effective to RAID0 on SATA3s to the mobo? What would be the ideal size for these disks (min and max)?  2 x 60GB would do? Or 2x120GB? More?

  I have also heard that, because of the nature of the scratch and cache, it would be better to have them on two separate drives? Or is it just an urban legend?

  Frederic,

  Bays of drive and the system configuration questions are good, but if I or someone had to answer us would be influenced by our own test files, projects, we have worked on, controller CPU, RAM, the card (or the lack of) and much more.

  Given that what you're building has several similarities to mine, I'll share some of my own conclusions. To the topic specific answers like "how many disks in a RAID before it's inconsequential", it depends on so many things you should probably stop asking questions like this, because it may depend on certain things - CODEC, number of layers, transitions, filters, etc..

  Things I'll comment based on similarities between the system you are creating and mine (X 58, 6-core CPU, 24 GB of RAM, controller Areca w / large cache (2 GB or more)):

  1 move the pagefile seems really make a big difference on my system. So therefore, I keep in my table of OS/programs.

  2. faster I ran used two large paintings with the projects, the media and all the files "scratch" on a table and "hide media" and released on the second. While the difference was not huge, the fastest result for PPBM5 comparative analysis was achieved but put 'media cache DB' on my OS/programs, which use SSDS.

  So, how do proceed you?

  1. load your operating system and programs on your disk boot or start table.

  2. set up your Areca and drives in RAID 0, load some concrete projects similar to what you'll be using this system for, and test. Run PPBM5 too, it's a very useful common denominator that can be used to modify your own system and do it before / after comparison of the changes you are trying. IMO, a drive of 9 or 10 RAID 3 or 5 (or 6 besides) works well enough for everything. [Readers here who have a big RAID 0 out of their motherboard, I don't know if this is true for you or not, my test was done with all the great paintings hanging on a controller from Areca]

  3. for answering your question about "Hard drives how much you" on your own system and with your own projects, simply repeat step #2 using a small RAID 0 array. Latest Areca SAS RAID controllers so fast, that I would say that you can count on very similar performance with a RAID 0 array with one less than road when you build the dos system to desired PARITY RAID; with the exception of RAID 6, of course, who would actually perform '2 disks' more small.

  4 configure your final bar selected with parity, load your projects and you're done!

  Another way, you can go forward? (Less time, less optimized, version case potentially filled with several discs, heat and energy than the 'optimal' generation) Note that I tested with a few large RAID 0 arrays that will be in my final build, and I use these disks for the storage of off-site backup.

  1 build your big array with PARITY from the outset.

  2. start to use the system and if it works well for you, you are finished.

  As for RAID 3, 5, 30 and more, I use my table of data for editing more video, so go with RAID 5 was a simple choice for me. That being said, it seems to me that in my system (using a large cache ARECA controller and drives of 1 TB 7200 32 MB cache) a player "a less" RAID 0 seems to work only about the same as a RAID 5, so I don't think that the ineffectiveness of the RAID 5 or RAID 3 for large files (aka video editing) may be noticeable.

  Kind regards

  Jim

• For help. DLL file / library call for the USB camera Image data file

  Hello

  I'm new to the use of the library and imaging data files. Attached is a picture of the "call library leader." I don't know how to set up the entry of 'beef' / frame buffer.

  More information is explained in the attached PDF file.

  Basically, I just need to recover data from image and convert it to a real image. I sought help of LabVIEW and other sites files, but I can't find a clear solution. Any help would be appreciated.

  FYI - I can communicate with the camera using other functions of library file. Opens the camera, I can set/view KING and other data. I can't quite understand the frame buffer.

  -griplegraple

  
  

• I moved Dreamweaver cs5 of the old imac for the new imac. Sites / files?

  Where is the information from the Sites? Should what file I go as well?

  Go to the old box and use Site Manager to export your site definitions. Copy them to the new box and import them with the Site Manager. Copy the files of the site on the old box and paste them into the same places (folder structure) on the new box. You have finished...

• have vista ultimate 32 bit and you want to install vista ultimate 64-bit on the same PC and transfer files from 32 to 64 and then delete 32 bits can be done on only 1pc?

  have w 120 GB HD on 60 GB free DVD have 32 and 64, as well as 2 DVDs with Office 2007 Ultimate. Could save the address book and all the other files, I want to keep and remove up to a 32-bit skeleton and then install a 64 bit os nude and would only be concerned on my ISP software as I have Comcast XFinity digital phone and Internet and a digital HD video recorder a 1986 Radio Shack Color TV at the wheel (the 1986 $500 that was a beauty for its time and is still.) My PC is an emachines T3616 and I have 2 GB of RAM installed (max) it is possible in this way?

  Hi Herman,.

  You can try to use Windows Easy Transfer to transfer data and settings to C: on D: drive and install Windows Vista Ultimate 64-bit on the C: drive. After installing Windows Vista 64 bit on C: drive try to reuse Windows Easy transfer to transfer the data back (from D: to C: drive).

  You can also take an external data backup before you attempt the Installation of Windows Vista.

  For more information, you can consult the following articles:

  Transferring files and settings: frequently asked questions

  Installation and reinstallation of Windows Vista

  Hope this information is useful.

• What is the fastest way to transfer files between two Windows 7?

  I have two machines windows 7. I use LAN to copy files. It is only 140 Kbps. Then I use TeraCopy to the task. The speed is now 410 kbit/s. It is still too slow to copy a 80 GB of files via the LAN.

  You have any good ideas?

  I Googled that there are a lot of said articles file copy Windows 7 via the LAN is slow as it is the case, is it?

  I tried to use Windows Easy Transfer. Well, I do not see the speed, and I don't know how long it will take for the transfer file either.

  I want to see a better plan and advice.

  Hello

  Transfer of files from one computer to another depends on many factors such as the speed of the computer and the method you choose to transfer the file.

  Visit the link to learn more about the methods for file transfer between two computers:

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  Reference: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/c30f6649-a0d9-4f5e-8671-904a8f5469bb

• The fastest way to transfer files between servers...

  I have a question regarding what would be the best option to accelerate the transfer of files between 2 servers to our VMware environment. We plan to spend our GroupWise email from netware to windows and upgrade to Groupwise (v7 to v8) at the same time. We will anticipate moving about ~ 125 gigabytes of data (files ~ 517 000) and expect that it will take several hours. We would like to minimize this time better we can so we wonder what would be the best configuration of things to get there? Two virtual machines on the same host? Two virtual machines on the data store even? On different hosts, or data warehouses? Our configurations are listed below:

  -In the course of running vSphere 4.1 ESXi

  -Data stored on 2 Dell Equalogic 5500 without

  -SAN one in each of the 2 sites, physically about 3 miles away

  -3 guests, 2 to a location and 1 in the other (same places the San)

  -Transfer of data from Netware 6.5 source, destination will be Windows 2008 R2 DataCenter

  -Links gigabit between all the elements of our VMware environment, including the link between the sites (on optical fiber).

  -3 guests are able to run all our virtual machines without overloading, so if we go to the virtual computer to another host, it is not a problem.

  We would like to know what is the best way to put everything in place for the transfer, so that we can prepare before hand. Any suggestions?

  Thanks in advance.

  Well, the fastest way would be to offload the clone/copy to the San operation. If your configuration supports VAAI then the clone would happen completely on the SAN by assuming that the source and destination storage device is the same SAN. Would it be different San then the network factors in anything. For what is running on the same host, which would be beneficial for cloning a virtual machine (mainly memory footprint) should not take place on the network.

  I hope this helps!