1E error blue screen on windows server 2008 r2

Similar Questions

• No blue screens SP1 Windows Server 2008 R2 after the deployment model

  Hi all

  I searched around forums and google to see if someone else has fallen on this, but I can't seem to find anything.  I have a 4.1 ESX 1 environment with vCenter 4.1 update 1

  I created a new system of Windows Server 2008 R2 and it patched for the last levels without SP1.  I cloned then it to a model.  When I deploy a server through this model with customizations (new SID), blue ect just system screens and goes in a reboot of the endess.  If I have the model with no customizations are deployed, it works fine.  It seems the new sid or something that's a waste.

  Any thoughts?

  Hello.

  Note: This discussion has been moved from the community of VMware ESX 4 on VMware vCenter Server community.

  There was a discussion there not too long ago which may help.

  Good luck!

• Blue screen on Windows Server 2008 R2 x 64 SP2 event ID 41 - Kernel-Power

  original title: BSOD on Windows Server 2008 SP2 R2 x 64 Event ID 41 - Kernel-Power

  I just installed the week last Windows Server 2 K 8 R2 SP2 x 64 on a Dell PE 2900 with the firmware update and I got 4 times the following error message:

  -System

  -Supplier

  [Name]  Microsoft-Windows-Kernel-Power
  [Guid]  {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   
  Event ID 41
   
  Version 2
   
  Level 1
   
  Task 63
   
  Opcode 0
   
  Keywords 0 x 8000000000000002
   
  -TimeCreated

  [SystemTime] 2010-07 - 20 T 20: 17:46.868007600Z
   
  4285 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 4
  [ThreadID] 8
   
  Channel system
   
  Computer NPCCSQ1.npc.pvt
   
  -Security

  [User name]  S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0x0
  BugcheckParameter2 0x0
  BugcheckParameter3 0x0
  BugcheckParameter4 0x0
  Fake SleepInProgress
  PowerButtonTimestamp 0

  I was not able to find any forum messages from anyone who has this exact problem.  The server is plugged into an APC Smart UPS RT and has a charge about 50%, so a conditioned power is not a problem.  I looked at Dell Server Administrator and there is not on the server or reading errors that are inconsistent.

  Any help is greatly appreciated!  It will be a production server and I need space and running as soon as possible.

  Sincerely,

  lhiggie

  You have posted in a forum for problems with the Vista operating system. Please post in the appropriate here TechNet forum:

  http://social.technet.Microsoft.com/forums/en/categories/

  MS - MVP - Elephant Boy computers - don't panic!

• How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you!

• Error blue screen of Windows 8

  Hello, I have a few problems with Windows... First I hade error 0cx000000f, which I was unable to start windows, and which I have fixed formatting my computer and reinstall windows (in fact, I installed a downloadable version of windows which I activated with my personal product key). It seemed made for the first time, but then I restarted computer and I got another blue screen, the "UNMOUNTABLE_BOOT_VOLUME"... I tried hard to solve this problem, but the onl thing I can once again formatted my pc and reinstall Windows 8, but when I restart error comes back. When the error affects PC I can not even boot Windows 8 DVD... Please someone help me...

  Hey! It seems that I fixed that! Now, I'm writing about it so if somone had the same problem can try to repair it this way. It seems that I was right to think that BIOS and operating system are not compatible...

  To fix the error, I followed these steps:

  1. I went to the BIOS and secure boot disabled to enable legacy support... (F10 > System Configuration > start... Options)

  2. I used a bootable, Gparted software, which actually start by pressing F9, then DVD internal, I formatted all my volumes of HARD drive, then I deleted all the volumes to have just a left volume...

  3. I used the DVD of Windows 8.1 to run "Recovery" and then used prompt to convert my GPT HARD drive - recovery > Troubleshoot > advanced > guest > diskpart (then write the commands following..) > select 'your own number volume' volume > clean > convert GPT... (the mistake that I did before, it's that I tried to install win 8 which can be installed on a HDD MBR but needs a HDD GPT to will work perfectly, and I was caught in the MBR format before somehow)

  4. I installed Windows 8.1 (from DVD) and the drivers in my PC and it seems now work very well, even if I am still unable to use start secure even if UEFI is installed, but that's okay as long as it...

  At least the error was the uncompatibility between the operating system (win 8) and the wrong format of drive (MBR) that I used to install Windows 8, system that was obviously too old for the version of BIOS and the BIOS (version 25) last...

• Facing error code standard activate windows server 2008 r2 0x8007007b

  When I turn it on with the product key indicating this error.

  Kindly help me solve this problem

  * This windows server is for commercial use

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error blue screen in Windows 7

  http://1drv.Ms/1DJlwOw

  I have attached the minidump and information system. Would be great if somone could let me know what file/software is causing the problem.

  Thank you very much!

  Hagen

  Lee

  Have you completed the tasks detailed in my previous message?

  I watched your Event Viewer logs files and have few problems. During the reporting period, you had only a blue screen error unless they are not reported and three unexpected shut downs.

  04/04/2015 error 13:59:04 error checking 1001 no

  Critical Kernel-Power 41 04/04/2015-13:58:48 (63)

  Critical Kernel-Power 41 29/03/2015-08:14:01 (63)

  Critical Kernel-Power 41 25/03/2015-01:47:31 (63)

  Critical Kernel-Power 41 13/03/2015-11:28:35 (63)

  The computer freezes and if it is how you deal with the gel?

  To eliminate the recurring event ID: 10 errors in your Application log please run the fix it in this KB Article
  http://support.Microsoft.com/kb/2545227

  I am far from tomorrow and will return to the fray on Tuesday.

• Blue screen of Windows 8 with various errors

  I want to HP dv6 provided with Microsoft 8 on it (it's only a year today)

  The problems that I encountered:

  -L' computer would freeze with a screen colorful weird pixelated

  -L' computer freezes while attending a bsod (you could tell because the screen would be the light blue color, but would not have error codes or restart)

  -L' computer would go to a bsod with an almost different error code every time (sometimes I couldn't write before it will re-start)

  -system_thread_exception_not_handled (dxgmml.sys) or (dxgkrnl.sys)

  -"KMODE_EXCEPTION_NOT_HANDLED"

  -page_fault_in_nonpaged_area (ntfs.sys) (it's the one I see most often)

  -memory_management

  -IRQL_not_less_or_equal

  -kernel_security_check_failure

  -driver_overrun_stack_buffer

  All these problems have occurred during various tasks, never the same as the one

  - And now I can't even on the computer because as soon as I turn it on it tries to auto repair, but fails. It then takes me to the boot menu where I tried all options, without success.

  I don't have any sort of installation dvd or windows dvd backup.

  I do not know what I did to make this crazy computer, but please help me to make happy again because I have no money against hepatitis a for professional help not to mention a new computer.

  OT: Computer Hp Windows 8 / I don't know what the problem is or how to fix it.

  Hello

  Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  I suggest you try the steps from the following link:

  Resolution of errors blue screen in Windows
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Also check if there are errors listed in Event Viewer.

  Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.

  To open the journals please follow the steps.

  Press the Windows key + W
  Type 'view event logs"on the splash screen and press enter.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• BSOD for Windows Server 2008

  Hi guys,.

  Lately, I've been experience error BSOD on my Windows Server 2008

  Whenever I logged on the server, I get "your rebooted Server unexpectly, please enter a reason" something like that. "

  I have attached the minidump, I hope you guys can help!

  http://DL.dropbox.com/u/48127873/minidump.zip

  Thanks in advance!

  Hello

  As you use Windows 2008 server, this aspect will have to be posted on the Microsoft TechNet Forums.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/category/windowsserver

• crash blue screen of Windows 8

  I've updated to windows 8.1 and realized that the games run slowly on it. Then I updated my software drivers so I spent again to windows 8. But when I did that my laptop started to crash at a random moment when I was playing a full screengame or watch a vid on youtube full screen it hangs and said if you want more search information for driver iqrl not less or equal.

  I would apreiciate if someone wants to help me.

  -Devil

  Hello

  Thanks for posting your question in the Microsoft Community.

  The DRIVER_IRQL_NOT_LESS_OR_EQUAL error usually occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  • Did you just install a new program or a piece of hardware, update a driver, install an update, etc. ?

  • You get the error message? Please provide the exact error message / error code.

  I suggest you try using the methods below and check if it can help solve the problem.

  Method 1: Run the Safe Mode and perform a clean boot

  Step 1: Safe Mode. Safe mode is a troubleshooting mode that starts Windows with a minimal set of drivers and services. Start your operating system in this way and see if the problem appears.

  Start the computer in safe mode with network and check if the problem persists. Follow these steps to start the computer in safe mode.

  Click on the link and follow the steps in Start parameters of Windows (including safe mode)

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135  

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  If the problem persists I suggest you follow method 2

  Method 2:

  Resolution of errors blue screen in Windows

  Reference: http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  IMPORTANT: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Also check your installed programs. If you see something that you have not installed and is not part of Windows, use the Remove Programs option.

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• Blue screen when you log in windows server 2008 r2

  When you connect in windows server 2008 r2, all I have is a blue screen and the mouse.

  I tried to search for solutions on the internet, then I found a microsoft patch "http://support.microsoft.com/kb/2590550" I have run the fix command line but he gave me nothing, no error or success messages.

  I tried to restart but I still have the same problem.

  Is there a solution to this problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Install Windows server 2008 r2 blue screens before

  I try to install windows server 2008 r2 on my system and it blue screens right after that the disc is loaded in the ram.  I don't not even to the selection of installation phase. It crashes just after the windows logo charge. IM receives the stop error 0x0000001e.

  my system is as follows
  Asus rog crosshair iv formula
  processor AMD 1100 t blacke edition x 6
  16 GB of ram
  ATI radeon hd 6950 graphics card
  and several discs hard digital western
  If someone has a possible solution to this problem would be great because I won't have a chance to make it work. Windows 7, it works, boots and install perfectly on this machine, but I need to put the server on it.

  Hello

  Your question would be more by experts Windows 7 IT Pro Installation, Setup, and deployment Forum. Check out the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit

  I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit. Here's the print for the activation screen. Your help is most appreciated. Thank you

  Hello Mika Wong,

  The question you have posted is related to Windows Server 2008 and would be better suited on the TechNet support forum. I suggest post you the question on the TechNet support forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems