2.1 text Notification error

Similar Questions

• Incoming text notification has stopped

  I have an iPhone 6 and Apple Watch and today the sound alert on both stopped working.  It is not in silent mode and I rechecked the settings for text notifications.

  Any thoughts?

  Hey achilds_IOS,

  Thank you for using communities of Apple Support. From your post, I see that your iPhone and Apple Watch are not audible alert you when you receive a text message. I can understand how it is important to hear notifications and want to help you get the most out of your device and all its features. The following information includes some options that can help to get it working again. If you haven't already done so, we will try to restart the iPhone 6 s and Apple Watch.

  You also said that nor peripheral are silent. We will also make sure that your device is not on do not disturb as well. The link below can show you how to turn off and check that do not disturb is not on a calendar.

  Use of do not disturb on your iPhone, iPad or iPod touch

  Let us know if this procedure works for you.

  See you soon

• I don't receive text notifications... my phone will not beep, vibrate or pop up notification for new text.

  I don't receive text notifications... my phone will not beep, vibrate or pop up notification for new text. However, when I go into my text messages, I see the small push "1" to indicate the new text. I've just updated to the new OS today, and here is the result. To complicate things, I myself sent an anonymous text of one of these websites, and THIS text vibrated and popped up! Help please!

  Obvious corrections

  The sound is on

  plane / do not disturb is off

  Tried to restart the phone

  go to settings and notifications and check if notifications are turned on for this

• PLSQL text validation error return function

  Hello

  I use the PLSQL text validation error return function

  that works fine

  DECLARE

  v_error varchar (1000);

  BEGIN

  IF condition = 1 THEN

  v_error: =' < span style = "color: red;" make-weight: bold; ' > You can not update dates you are not allow to update the dates </span > ';

  END IF;

  Return v_error;

  END;

  can someone tell what I can use APEX to display the v_error message in one line on the region of html

  as I use displayed element so it is wrapping the text

  

  

  Hi ReemaPuri,

  Change the settings for the grid of the element of error message (which is only point display) from the rest of the elements in the region so that the error message is contained in a grid and other elements are in the new grid.

  Kind regards

  Kiran

• E-mail and message text (Notifications) sounds

  E-mail and message text (Notifications) sounds are too weak and since they all sound the same that I never know if I have a new E-mail or a text Message. How can I implement the different sounds for the emails and text Messages?

  It really bothers me too.  I have no idea if I get a txt, email, the charge of the battery, etc.  I really do not understand this at all.  The timetable is even a different sound.  Why would they released it with something very basic as notifications.  Please change this Palm.  We know that you can put it in the next version.  Please, I beg you!  We love you!

• iOS text Notifications

  I'm not sure that my iOS text notices are received for a multi-folio Viewer application.

  When I send the text notification to the developer as a test app, it works perfectly. The SMS is received, I can see the number of devices and devices sent in the details of the notification.

  However, when I send the message to the application of the distribution, I don't think that it is received. It displays the status sent, but when I look at the details of the notification, I see the number of currencies, but '0' sent devices. My test subjects do not get the message.

  The version of the App is v26 and push notifications is allowed and NPP certificates were created.

  What should I do?

  Thank you

  Mike

  Text notifications should work with the v26 Viewer. I guess the pusher are valid. I think you should communicate with Gold support to help you resolve the problem. The number is written on the DPS dashboard (https://digitalpublishing.acrobat.com) when you connect to your Pro or Premium account.

• Stop text Notifications during phone calls

  How to stop text message notifications sounds while I'm in a phone call without silencing everything? It is very annoying and unprofessional when you talk to someone and there is the same constant beeps heard on their end.

  I do not have a setting for it there, but I agree it's annoying to be interrupted during a call. The notification should be delayed. Why not drop a line to iPhone Feedback?

  TT2

• Graphics refresh rate and the writing of text problem - error 5

  Hi guys,.

  I'm new to labview and have encountered some problems when I try to write to the file.  I use USB-6259 with Labview 2009 to acquire a number of channels I want to analyze later in MATLAB, all at the same time providing some limited analysis in real time.  The experience is to use lasers to calculate the position of a rotating cylinder.  I wrote a quick vi using the DAQ assistant to acquire channels and provide a polar diagrams showing the counterclockwise movement as it turns what is ideal.  The problem is that, because the cylinder rotates at up to 6 Hz, graphical needs updated very quickly I realized by using a buffer size lower compared to the sampling freq (sampling freq between 5 k and 10 k, buffer around 200).  This does not seem the best solution.  Also, when I try to write in the text, the following error is displayed after a few seconds:

  Error 5 has occurred writing to measure file-> Displacement_Rig.vi, or the possible reasons:

  LabVIEW: File already open.
  =========================
  NOR-488: Command requires GPIB controller system controller.

  Can someone point me in the right direction?  I tried to create a loop of producer/consumer, but I'm not convinced that it works with my limited expertise.  I attatched my vi, although I warn you, I'm new to labview...

  See you soon

  Hello Ipaza,

  I watched your VI and found that there are has some problems in the architecture of your consumer producer loops.

  You can get a pre built loop producer consumer using the templates on the start screen.

  I copied the majority of your code in such a model. Could you test this and let me know if this solves some of the question.

  With regrads,.

• change the text unit-error bounds 1128

  Hey everybody,

  I develop a VI that uses the native power of LabVIEW units to do all the conversions of my numbers.

  Here my question, once variables are defined for a control when editing can I change the text of unity to something not related to execution in order to prepare my indicator for a different signal? For example, lets say channel 1 is a temperature for Test1 so programmatically feray Cdeg conversion and back without problem for LabVIEW. For Test2, the same VI is used, but now the channel 1 is a pressure. Programmatically change my of feray indicator units now a unit of pressure psi, atm or bar? I am getting error 1128 "input unit is not compatible with the device current." even if the device is correct when it is entered at the time of publishing.  Any thoughts?

  Thank you
  Craig

  Hi Lucie,.

  No, you cannot change the type of unit when running. This will be fixed at compile time. You can modify other representations of the same physical property (as the Pa to the bar or some obscure lb/po2 of pressure).

  An old trick when using units:

  You can use '$1' as a control unit. Using a function to "Convert the unit" also set to "$1"you can then strip the unit." If your Subvi accepts any control unit connected-, but that does not solve your problem of perticular

• BlackBerry Z30 text notification sound

  After the recent update the z30, I can't change the notification for text and e-mail sound. I can not even find where to change the settings.

  Fixed.

• BlackBerry Z30 text Notification sounds

  I just got my new Z30, have everything set up the way I like it but I'm having a problem with the sound is when I send or receive a text. In the notifications, I got the tone on the 'present' sound for text messages, but whenever I have to send a message, it makes the 'essential '. When I receive a text makes the 'essential' sound first then the 'present' sound, or sometimes both at the same time. He does this in the Normal profile and when I set the phone to silent or vibrate it does not either sound. If I put it in phone calls that he always does the "Essentials" its transmission and reception of texts. All the sounds for other applications, including the BBM and 5 different emails, that I put in place are working properly, so it's just the SMS language that drives me crazy!

  I tried to delete the texts of the hub and that did not help. I disabled the sounds for the texts and it is always the 'essential' sound.

  Help please!

  You have installed all the apps that deal with notifications, i.e. custom LEDS and sound notifications for specific contacts?

  See you soon.

• Text notification

  At work, I put my volume of the ringtone to vibrate, however, if I get a text message, only the Visual notification is displayed.  How can I get to vibrate for the message text as well?  Thank you!

  go into the messaging App hit the Meu button and select settings... drag down you will see the Notification settings.

• [Please help :"(] Null object and solid or text combining error

  Hello, I am a newbie after effects user.

  I try to connect other solids or text boxes to the null object.

  What I learned from tutorials, it's that I can move text boxes by moving the null object after parenting the text boxes to the null object.

  Here is my error.

  The areas of tracing moves independently outside the text itself.

  This happens for all other solids.

  How do I fix this error?

  In the image below, you can see the red lines on the left side of the preview screen.

  It happened when I moved null object to the left.

  

  In the image below, the traces of the text boxes are placed on the right side of the preview screen.

  

  When I delete the null object, the text moves with its box.

  

  Of course your Null object will have to be both 3D...

  Mylenium

• + Notification ERROR: the downloaded certificate distribution is a development

  I'm looking to get a notification to indicate to users that I published a second folio in my application. I generated and downloaded the certificate (.cer the site developer then exported towards .p12 Keychain Access files) I get this error but I am almost sure that the certificates are correct. What Miss me?

  Thank you!

  Is it possible that P12 exported your certificate of distribution is in fact your development certificate, with a wrong file name?  I would re-exported from your keychain and try again.

• Text notifications coming to Android?

  Are there plans to support notifications to text on Android? This function is currently only iOS. Visitors ask me all the time if it will be finally arrives on Android not too, because non - DPS apps like Focus offer this feature for a long time.

  Hello

  It is something that we have before us, but is currently less than other items on our list of priorities.

  Neil