2 groups of House on 1 computer network

Similar Questions

• I can't join or create a group of houses in windows 7 it says my pc and laptop cannot create a how I should I followerd all articles I can find on the microsoft kills site

  I can't join or create a group of houses in windows 7 it says my pc and laptop cannot create a how I should I followerd all articles I can find on the microsoft kills site

  Hey borq Queen,.

  Welcome back you hear. If, after completing all the steps below, you are still unable to create or join a homegroup, I think that the issue is to do with IP/V6.

  Check your setting of the adapter for IP/V6. Your network connection must have IPv6 enabled to create or join a homegroup. If it is disabled, follow the steps below to activate it.

  (1) right click on the network icon and select open network and sharing Center.

  (2) in the window that appears, select change the parameters of the map.

  (3) in the network connections window, select the connection to the Local network for the Integrated NIC, and then change the settings for this connection or the file > properties.

  (4) in the connection properties page, check the box for Internet Protocol Version 6 (TCP/IPv6).

  Close all windows and restart your system.

  Try to create a homegroup.

  You should be able to create or join one after the activation of the IP/V6.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK

  I CAN'T ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK. PLEASE HELP ME.

  Hi AR7, welcome to the Forums of HP. I understand that you can not connected to the Internet. HP offers no support for this configuration, as a result, here's the method to connect to a WiFi network.

  Connect to a wireless (Android KitKat, Jelly Bean)

• the name of the local computer network card limit has been exceeded

  noticed that my domain root name has been defined for the replication of the dns to the domain only. When I tried to return to the replication with the forest, I got the above message. It will obviously be let me no change without correction of this error. No other error message appears in the newspapers.

  Hi Monroetech,

  You can read the following article and check if it helps:

  Error message: the name of the local computer network card limit has been exceeded

  Hope this information is useful.

• Computer network does not appear

  Computer network in my Windows XP desktop, how to display all of the computers on the network?

  Kind regards

  Hi Vidal,

  1. how many computers is connected to each other?

  2. are you using Windows XP home or professional?

  You must open the "my network places to view all the computers on the network. You can also use these steps to search for computers on the network.

  Step 1: Search for a computer when you know the name of the computer:

  If you know the name of the computer, you can search for the computer on the network:

  a. click Startand then click Search.

  b. click Printers, computers, or people.

  c. click on a computer on the network.

  d. in the computer name box, type the name of the computer you want to find, and then click Search.

  Step 2: Search for a computer when you do not know the name of the computer:

  If you do not know the name of the computer, you can browse for the computer on the network:

  a. click Startand then click my network places.

  b. click on the entire network.

  c. double-click Microsoft Windows network.

  d. double-click the name of the domain you want to search for.

  e. double-click the name of the computer that you want to access so that the shared resources are displayed.

  Reference:

  How to search for a computer on the network in Windows XP

  http://support.Microsoft.com/kb/308887

  Hope this information helps. Response with status so that we can help you.

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• Control Panel is not on the list. Users and local groups does not appear in computer management.

  1. click on start, and then point to setting, control panel is not on the list.  When you try to get to the Panel of control via a link in Help and Support, had an error, "operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

  2. local Users and Groups does not appear in computer management.

  There is only one profile on the PC, the OS is XP Home.  It seems lost his administrator privileges somehow my user profile.  Could you please suggest how to solve this problem?  Thanks in advance.

  Hi PJohnson,

  You can access the link below and follow the steps in the article to create a new user account and copy the data to the new account.

  http://support.Microsoft.com/kb/811151

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I find the password for the secure on my computer network?

  How can I find the password for the secure on my computer network?

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Either you knew the password and have forgotten (in which case we cannot help you), or ask the person who set up the assistance network

  See you soon.

• Set-vipermission to groups at the level of the network in vCenter?

  I tried to assign permissions to objects in network with Powercli.  Based on this link http://communities.vmware.com/message/1563864 Set-VIPermission does not work on the network of the objects and provide a workaround to assign permissions.  This works very well when you are trying to assign users but throws the following error when you set the security to a group entity (IE, domain\group)

  
  

  $SpecPG = get-view ViewType - network | where {$_.name - eq "Network"}

  
  $role = $authMgr.RoleList | where {$_.} Name - eq $role}

  $authMgr = get-View Manager
  $perm = new-Object VMware.Vim.Permission
  $perm.principal = "Domain\vSphere_Users".
  $perm.propagate = $true
  $perm.roleid = $role.roleid
  $authMgr.SetEntityPermissions ($SpecPG.MoRef, $perm)

  
  

  Exception by calling 'SetEntityPermissions' with '2' or the arguments: "the user or the group named 'Domain.Local\vSphere_Users' does not exist."
  Online: 39 tank: 30
  + $authMgr.SetEntityPermissions < < < < ($SpecPG.MoRef, $perm)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  
  

  It seems that when you try to set permissions for, it adds the name of domain (in this case Domain.Local) FULL instead of just the domain name.

  
  

  Is there a way to remove the COMPLETE domain name in the main name?
  

  
  

  I use VMware vSphere PowerCLI 5.1 Release 2 build 1012425.

  
  

  Thank you

  
  

  John
  

  It seems that if you forgot the Group property

  $SpecPG = Get-View -ViewType Network | where {$_.name -eq "Network"}
  
  $authMgr = Get-View AuthorizationManager $roleName = "Admin" $role = $authMgr.RoleList | where{$_.Name -eq $roleName}
  
  $perm = New-Object VMware.Vim.Permission$perm.principal = "Domain\Groupname"$perm.propagate = $true$perm.Group = $true$perm.roleid = $role.RoleId
  $authMgr.SetEntityPermissions($SpecPG.MoRef, @($perm))
  

• I need a lot of computer, network, routing, symbols etc..  Where...?

  I was hoping that Illustrator CC 2014 (for my Mac) has been a much better alternative to Microsoft Visio (for PC which I don't own) who has a whole rich known to computer network included... computer forms, laptops, monitors, routers, switches, servers, clouds, etc.  These forms should be simple "line drawings".

  But in Illustrator I see only a little, a few lame forms in the form library "Communications".  There isn't even a picture of a laptop.

  I looking in the wrong place in Illustrator?  Is there a place to Adobe to download additional forms to build a library, or an existing library, with forms that I hope? I went looking on the internet for download libraries of form with appropriate images, without success.

  Thanks for helping me!

  Tom

  Looks like your best bet would be to search for games of a certain type vector icons. There are a multitude of games out there to use if you are not comfortable making your own. As I said there are a lot of choices if you want for free or if you're willing to pay for some will depend on where you look for them.

  Here is a list of free sites (all found via searching for "free vector icons"):

  • Icons free vector - SVG, PSD, PNG, EPS & icon fonts - thousands of free icons (also well paid)
  • Vector - vector icon free free download
  • Free vectors | Category icons
  • http://4vector.com/

  Here is a list of paid for sites:

  • Photo galleries, rights, music & video clips-free images - iStock
  • http://www.Shutterstock.com
  • http://www.streamlineicons.com

  Please make sure that you have checked all of the licenses when using vectors of third party.

  I hope this helps you? All the best.

• A person or group has taken over my computer

  A few years ago, I downloaded accidentally malware/trojan/virus through a flash update. My internet has sent almost as much as she gets slow my computer down to ridiculous.  A few years ago I enabled hidden files and found a whole bunch of very strange file names starting with $ and extremely long numbers. For example, $NtUninstallKB2655992$.

  I looked into some of these hidden folders to find text files with a very strange, as the rectangles and something like nAuN dirty as a name in it.

  There are 39 just in my Windows folder. In addition to a folder called $hf_mig$ who has stored all my XP system updates and, perhaps, since it happened. There are 38 updates since 10/10/2012 in there. Files named something close to KB2724197 are listed in there. I guess they are updated because they have almost the same name as the updates of today that I was not allowed to install.

  Last night I started in safe mode to change the privileges on files hidden as a RECYCLER. When in safe mode, I clicked on RECYCLER to change the admin him. When he wouldn't let see who was the owner, I started to look around. In the box, there is a list of privileges to assign read/write, etc. But "special permission is grayed out. As I have gone through and created a new user for my self, I found this list of users;

  ANONYMOUS
  Authenticated users
  BATCH
  Dan (me)
  DIALUP
  Everyone
  Comments (deactivated)
  Guests
  Help Services Group (deactivated)
  Help Assistant
  INTERACTIVE
  NETWORK
  SERVICE
  SUPPORT_388945a0
  SYSTEM
  Terminal Server user
  User (has been disabled)
  Users

  I was unable to make changes when you try to remove users from this file. When I tried the error message showed a path? \C:\RECYCLER, you do not have sufficient privileges to make changes.

  Éventuellement par le biais de fouiller, j’ai pu voir le propriétaire de celui-ci, qui était de 5-1 - 5-21 - 1205666252-1506235805-1800150966-55846

  Note aside, everything first, I realized something was wrong years when I found that Audacity could not use my microphone or adjust the volume in my controls.

  So, what is with all this?

  At this point, you have to assume that all of your data and personal information on the computer is compromised.  You must ensure that your credit cards and other financial accounts have not been fraudulently used.  Use a secure computer known to replace your passwords online.  If you have already used an online credit card, call the credit card company and request a new account number (explain that your computer may have been compromised - they should treat it simply as a lost or stolen card).

  Reading this, especially the last paragraph--> http://technet.microsoft.com/en-us/library/cc700813.aspx

  Contact your computer manufacturer and ask them to provide you with a way to reinstall Windows.  If they cannot help you, ask the computer lab (or a renowned local independent repair store - not a store chain) and ask them if they can re-install version authentic Windows XP for you.  They may or may not be able to do, depending on what the media available to them and that the label of certificate of authenticity of Windows XP on your computer can be read.

  Overall, it may be cheaper to purchase a new netbook.  You will not be able to get one with XP, however.  You will probably have to get used to Windows 8 or Google Chrome.

  Really, the alternative to reinstalling Windows or buy a new computer - and it is not a good alternative and is not guarantee of success - advertising interactive help in one of the specialized forums malware removal I listed before.

  Although it is technically possible that your BIOS is infected, it is very likely (unless you live in China).  A rootkit BIOS named Mebromi appeared a year or two ago, but it can only attack computers that use BIOS code produced by a specific vendor.

• "The dependency service or group could not start" - cannot open network connections to connect to the internet.

  Hello

  Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

  However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

  Any help would be greatly appeciated :)

  Thanks in advance

  Sam

  Medion M96350,

  Intel Core 2 Duo,

  T520 @1.5 - Ghz,

  Vista Home Premium

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I remove a temporary computer-to-computer network?

  I created a temporary computer-to-computer local network connection in an attempt to transfer files between two computers (which was unfortunately unsuccessful). However, the network is still there and I want to remove for security reasons. How can I remove a network that I put in place? I checked the troubleshooting guides and there doesn't seem to be any information.   Two computers are still in close range (I don't think that our House is still big enough to get out of the beach), and I clicked 'save the network' when I did. I am running Vista.
  any help would be great

  Open the Control Panel and go to network and sharing Center. Click Customize to the right of the current network in network and sharing Center , and then click merge or delete network locations at the bottom of the screen again. Merge or delete as you wish.

  You will also need to click on manage network connections on the left in the network and sharing Center and remove the network you want.

  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• PC Windows 7 and Vista Home Premium computer network cannot access each other

  I have an a Premimum Vista computer with a USB printer on a network with a Windows 7 Ultimate Computer.  Both recognize each other both are visible in the network on both computers) but I can not access one or the other.  Message on window 7 says "your computer seems to be correctly configured but the resource does not."
  "Any suggestions?  I need to produce and share printers.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  In Vista, turn on password protected sharing. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. create shares as desired. In Windows 7/Vista I usually shares its office and the Public directory.

  E. After you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but that is beyond the scope of this answer. MS - MVP - Elephant Boy computers - don't panic!

• Hi ALL, did any attempt on the virtual computer NETWORK load balancing using HYPERV on UCS blades

  I try to configure the CASE server cluster by using the Unicast NLB on the virtual machine on different blades on the UCS, it works for awhile, then he abandoned packages.

  I heard that this screenplay of unicast is not supported in the UCS when she used END-host mode in the fabric interconnet...? any attempted before.

  Would it, I use the multicast mode is that something needs to be done on the FBI62020 or the LAN switch upstream. ??

  Header note I found on the implementation of UCS for mulitcast NLBL:

  Microsoft NLB can be deployed in 3 modes:

  Unicast

  Multicast

  IGMP multicast

  For series B UCS deployments, we have seen that the multicast and IGMP multicast work.

  IGMP multicast mode seems to be the more reliable deployment mode.

  To do this, the monitoring settings:

  All NLB Microsoft value "Multicast IGMP" nodes.  Important!  Check ths by logging into EACH node independently.  Do not rely on the MMC of NLB snap.

  An IGMP applicant must be present on the VLAN of NLB.  If PIM is enabled on the VIRTUAL LAN that is your interrogator.  UCS cannot function as applicant IGMP.  If an interrogator of functioning is not present, NLB IGMP mode will not work.

  You must have a static ARP entry on cheating it upstream pointing IP address Unicast NLB on the multicast MAC address NETWORK load balancing.  This need will set up, of course, on the VLAN of the NLB VIP. The key is that the routing for the NLB VLAN interface must use this ARP entry as a unicast IP ARP response may not contain a multicast mac address. (Violation of the RFC 1812)  Hosts on the NLB VLAN must also use the static entry.  You may have several entries ARP.  IOS can use a function of 'alias' of ARP. (Google it.)

  How Microsoft NLB works. -The truncated for brevity Mac addresses.

  TOPOLOGY OF NLB MS

  NETWORK VLAN 10 = subnet 10.1.1.0/24 IP load balancing

  VIP = 10.1.1.10 NETWORK LOAD BALANCING

  Arp entry static switch advanced IP 10.1.1.10 upstream to MAC 01

  NLB VIP (MAC 01, IP 10.1.1.10)

  NODE-A (AA, MAC IP:10.1.1.88)

  NŒUD-B (MAC BB, IP:10.1.1.99)

  Using the IGMP snooping and interrogator VLAN snooping table is filled with the mac NLB address and groups pointing to the appropriate L2 ports.

  MS NLB nodes will send the responses of IGMP queries.

  This snooping table could take 30 to 60 seconds to complete.

  Host on VLAN 200 (10.200.1.35) sends traffic to NETWORK VIP (10.1.1.10) load balancing

  It goes of course to VLAN 10 interface that uses the static ARP entry to resolve to address MAC 01 VIP NETWORK load balancing.

  Since it is a multicast frame destination it will be forward by the IGMP snooping table.

  The framework will arrive at ALL NLB nodes. (NŒUD-A & NŒUD-B)

  NLB nodes will use its load balancing algorithm to determine which node will manage the TCP session.

  Only one NLB node will respond to this host with TCP ACK to start the session.

  NOTES

  This works in a VMware with N1k, standard vSwtich and vDS environment. Where surveillance IGMP is not enabled, the framing for VIP MAC NETWORK load balancing will be flooded.

  NLB can only work with TCP-based services.

  As stated previously mapping an IP unicast to a multicast mac address is a violation implied by RFC 1812.

  TROUBLESHOOTING

  Make sure your interrogator is working. Just to clarify that this does not mean that it is actually at work.

  Wireshark lets check that IGMP queries are received by the NLB nodes.

  Make sure that the ARP response works as expected.  Once Wireshark again is your friend.

  Look at the paintings IGMP snooping. Validate the L2 ports appearing as expected.

  CSCtx27555 [Bug-preview for CSCtx27555] Unknown multicast with destination outside the range MAC 01:xx: are deleted. (6200 FI fixed in 2.0.2m)

  IGMP mode not affected.

  CSCtx27555    Unknown multicast with destination outside the range MAC 01:xx: are deleted.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx27555

  fixed in 2.0(2m)

  Solution: Change the NLB mode of operation of "Multicast" to "multicast IGMP', which modifies balancing load NETWORK VIP MAC at 0100.5exx.xxx Beach, allows to transfer occur as expected.

  Q: and if I switch to switch mode, which means all of the profile and the settings on the servers are completely exhausted and I need to recreate them. ???

  A:Cisco Unified Computing System Ethernet switching Modes

  http://www.Cisco.com/en/us/solutions/collateral/ns340/ns517/ns224/ns944/whitepaper_c11-701962.html

  -There is no impact on the configuration, you have done service profiles.  they will continue to work as expected.  Mode selector has the FI behave more like a conventional switch.  Most notable is that Spanning tree will be activated and if you have several uplinks yew, tree covering weight will begin to block redundant paths.

  You need to review your topology and what impact tree covering weight.  Generally, we at the switch port upstream defined as "edge master", you want to delete this line.

  For pre-production and laboratory environment, PDI can help qualified with the planning, design and implementation partners.  Given to review the IDP site and open a case if you need more detailed assistance.