2 How to save the settings for all users.

I recently had to move the hearing to a vista machine.

Now, the Setup is a slight pain in the * mainly because of Vista in Vista.

But now that I put it in place under my profile how can I keep those settings for all users?

When a new person connects to this computer, it goes to the built-in default material (which of course didn't is not connected to anything) and not to the sound card that is connected to the mixer.

So what I'm after, is a way to save all settings (including workspaces) and their default for all users (including users)

(Please tell me there's a way to do it...) Having to configure AA for each trainee or a guest is going to be an incredible pain in my *.)

Thank you.

Audition CS6 and later have the opportunity to create "Machine-specific device settings" that replace a users roaming profile preference files when you connect to jobs at random, but cela was not available in Audition 3.  There may be solutions workaround, depending on your network configuration, but nothing as nice and direct.

Tags: Audition

Similar Questions

• How to change the password for all users in the database

Hi buddies!

Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.

Thank you.

Nith

Write the file spooling
as

Make sure that all profiles has password_verify_function with a NULL value

then

Select 'edit user' | username: ' identified by ;' from dba_users;

you will get the output... you just run.

• Save the settings for the panels

I have a question - y at - it a good workaround solution, how to save the settings of a Panel? I intend to provide options for a Panel, which the user must be able to turn on/off. I thought to save the settings in the Json file. I don't know how to do better, or someone has a better idea or another way to get the result?

You can set the persistence on (as when the user reopens the Panel * in the same session of PS *, it will keep the same status), or otherwise use LocalStorage, persistence independent of sessions.

Davide Barranca

http://htmlpanelsbook.com

• Application settings for all users in Hyperion Planning

Hi, I work in Hyperion Planning 11.1.2.3.500.17, is it possible to configure the application for all users settings in Hyperion Planning with the application owner user? I want that all users consider the alias of a members of the workflow.

LCM exports using the user preferences located under Configuration, that generate an xml file, update the xml file and then import them into.

• How to access the data of all users of a page?

Hi all, I'm new to APEX and have a query.

I have installed APEX on my local machine, create a workspace and added a few users to roles.

I'm creating an application, similar to a library application, where I have a table that stores information of books (BOOK_ID, BOOK_NAME, etc.). I would like to create another BOOK_USER table with two columns BOOK_ID and USER_ID. BOOK_ID refers to the BOOKS table and I want to USER_ID to refer to the table that stores the information of the users of the workspace I use. Data entry would be a page that has two LOVs, one for the name of book (using BOOK_ID as value) and another for the user name (USER_ID, or another field APEX uses to store the ID of the user). I can do in APEX? I found ways to access and authenticate a user to a page, but how to get the data of all users in the workspace? In other words, how to get all the usernames in a LOV?

As I am new to APEX, I would appreciate if anyone can guide me through the steps, or posting links to the tutorial, etc.

I think you can do this by querying APEX_WORKSPACE_GROUP_USERS.

• How to get an extension of the dictionary for all users in a Citrix environment?

Hi all

Under title, I'm looking for a way to get out a dictionary of Firefox (specifically the English (British) of https://addons.mozilla.org/en-US/firefox/language-tools/) to all users in a Citrix environment. Comprehensive silent installation is absolutely best. Because following a recent installation of Firefox users report that this spell check is not working, what appears as a result there is no dictionary to check the spelling on the facility.

It's in a corporate environment, running 6.5 XenApp hosted workstations to multi-server Windows 2008 R2 Enterprise x 64, the installed Firefox info below as collected by the add-on troubleshooting pulled from the browser in the test environment with the same characteristics.

So far, I have tried what follows from this link: http://kb.mozillazine.org/Installing_extensions

"A whole installation will install an extension in the directory of the application rather than in a profile so it will be available to all users. To perform a whole installation, you must not activate as within your Mozilla application installation file. Instead, download and save this record and make sure you close the application completely.

Then follow one of the following options:

   Copy the .xpi file into the <installation directory>\extensions folder. When you start your Mozilla application again, it displays an installation dialog, asking "The following items were found in your Extensions folder. Do you want to install them?" "


Although it seems that the < installation directory > \extensions folder no longer exists at the given location. Find a path of the < installation directory > \browser\extensions but seems it does not behave as said here that I have not received all of the guests. I hope that this method is still applicable in some way and I am just not aware of how this is currently supposed to be handled, but not sure if it is a dictionary rather than a typical add-on will have no effect on the installation overall how can be reached.

Have also tried to http://forums.anandtech.com/showthread.php?t=2268437 , which seems a pretty basic option, but this would have not only to a lot of work to do on a per user basis, but there are also restrictions in place to prevent access to the records of users AppData.

Finally I was looking https://support.mozilla.org/en-US/questions/740545 to push this point across: the les parametres parameters configuration, then use the method above to enforce this on the user end, but did not find anything me.

Any help/advice/shots of elbow in the right direction would be greatly appreciated.

It might be easier to extract the files of two dictionary (.dic and .aff) of archive XPI (ZIP) and place the two files in the folder of Firefox profile for the dictionaries available for all users.

• How to change the settings for the taskbar in Windows 7.

Anyone know if its possible to change the settings for the taskbar for the other windows or games can cover or be on top of the taskbar. I have my taskbar set to the top of the screen and when I start Flight Simulator Microsoft in full-screen or 1920 x 1080, he fills the entire screen except the upper part which is the bar of tasks, and because of this the windows sim who loses more space and shows its own menu with windows that... yet once loses more than space. The vertical extent of real world it takes away 1 inch of space on the screen that I find pretty ridiculous. These two programs are both manufactured by Microsoft, in my opinion, that they must work with each other, so I hope that im missing something in 2015?

Thank you all

Win 7 64

AMD 955

NVIDIA 460se

4 GB

Edit: Auto Hide on the top is not a solution but a miserable boring frustration.

(Taskbar + tabs/url/search/minimize/output = someone must die)

Thank you program is in windowed mode full-screen because of the taskbar.

* See below screenshot of restoration

for everyone who has this problem, I found a solution!

Right click on the bar tasks once run-> advanced-> click disable_topmost options->, icon 7TT

Enter 2 (starting from 0)-> click on apply and ok

* Note that the program must execute to the difficulty of working so defined to run at startup during installation

This program does a lot of things, but this will allow your taskbar to stay in place and allow it to be covered by windows.

• How can I block the SMTP for all users but mail server

I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

Thank you

___________________________________________________

6.3 (1) version PIX

interface ethernet0 car

Auto interface ethernet1

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

names of

name 172.16.4.10 pdc

name 172.168.4.11 llc

name 172.16.4.11 ftp

object-group service E-mail tcp

port-object eq www

EQ smtp port object

object-group service tcp - udp terminal

3389 3389 port-object range

object-group service mw tcp - udp

Beach of port-object 367 367

4899 4899 object-port Beach

object-group service mw1 tcp

Beach of port-object 367 367

access-list 101 tcp refuse any any eq smtp

access-list 101 permit tcp any host object-group x.x.x.251 terminal

access-list 101 permit tcp any host x.x.x.214 object-group radmin

access-list 101 permit tcp any email host x.x.x.207 object-group

access-list 101 permit tcp any host x.x.x.212 object-group mw1

access-list 101 permit tcp any host x.x.x.211 eq ftp

sheep ip access-list allow any 192.168.101.0 255.255.255.240

IP verify reverse path to the outside interface

IP verify reverse path inside interface

alarm action IP verification of information

IP audit attack alarm drop action

IP local pool mypool 192.168.101.1 - 192.168.101.20

don't allow no history of pdm

ARP timeout 14400

Global interface 10 (external)

NAT (inside) 0 access-list sheep

NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

"REM # 172.16.2.13's Exchange with Outlook Web servers #

static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

Access-group 101 in external interface

Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

enable floodguard

Sysopt connection permit-pptp

VPDN PPTP-VPDN-group accept dialin pptp

VPDN group PPTP-VPDN-GROUP ppp authentication pap

VPDN group PPTP-VPDN-GROUP ppp authentication chap

VPDN group PPTP-VPDN-GROUP ppp mschap authentication

VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

VPDN group VPDN GROUP-PPTP client configuration address local mypool

VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

VPDN group VPDN GROUP-PPTP pptp echo 60

VPDN group VPDN GROUP-PPTP client for local authentication

VPDN allow outside

Access-group 101 in external interface

You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

To prevent users from going out, you will need this:

access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

access list tcp OUTPUT deny any any eq smtp

Access-group interface inside OUT

See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• How to extract the ddl for all databases of links?

DB: oracle11gr2

Friends,

I can get including db link the package DBMS ddl but could not able to find a way to extract the ddl for all the database link and the coil in a file recreate them in the future?

Tried searching on OTN but no luck, if someone shares how them spool or point me to a particular forum that will be great.

Thank you

We may also use something simple, select as below to extract the ddl

/

• How to disable printing depends on the location for 'all users '.

I need to disable the "Location-Aware Printing" for "All Users" on the laptops that we use in our company.  Is there a way to do it, or is it one per user (HKCU) power only.

Thank you

Mike

Hi Mike,

The question you posted would be better suited in the TechNet Forums. I suggest that you post the query in the link.

Hope this information helps you.

• How to change the value of the Application for all users?

Hi, I work on Apex 3.2.1.00.12 which is installed on a database of Oracle 10 g Enterprise Edition Release 10.1.0.5.0

I'll explain my problem... At the beginning of the application, the user choose a year, each year can have 3 status and based on the State to restrict or grant access to certain tabs, pages and options. I put the status of the year selected in an Application element and then I just use an authorization scheme to check if the user can access pages or options.

The problem is that if the administrator changes the status of the current year (for example, 1-2), users who are currently in the application will have access to the options of the State 1, instead of the State 2 options. is there a way to change the value of this element for all users?

Thank you.

Force a disconnection of all users? You can't really affect the values of the sessions other than your own via a browser, and from the point of application is part of a single session...

You could re-read the value of point of application of its source whenever you load a page or tab game...

Thank you

Tony Miller
Ruckersville, WILL

• How to enable the CACHE for all LOB data

Hello

I want to activate the CACHE for all LOB in my database - 10.2.0.4

Does anyone has generic script to activate the cache for all TRADES

Thank you

You should be able to write some dynamic SQL code. This will set each BUSINESS in the current schema CACHE

DECLARE
l_sql_stmt VARCHAR2(4000);
BEGIN
FOR lobs IN (SELECT * FROM user_lobs)
LOOP
l_sql_stmt :=
'ALTER TABLE ' || lobs.table_name ||
' MODIFY LOB( ' || lobs.column_name || ' ) (cache)';
execute immediate l_sql_stmt;
END LOOP;
END;


Justin

• How to fix the damaged for windows user profile 7

My gadgets disappeared in windows 7, I went to the community and checked the previous answers to this problem. I created a new profile for the user with the Administrator's control and gadgets were back. I want to thank everyone for their responses which were very helpful. But I want to the difficulty of the original user profile that has been corrupted. However, I do not understand how to do this. Can someone out there help me please. Thanks, Cviggie

Hello

It is almost impossible track down corruption in a user profile.

You can create a new user account and to transfer all of your personal files and most of the settings to a user account.

See the following article for step by step instructions.

Difficulty a user profile corrupted - how to

Concerning

• How to create a shortcut for all users during installation

Hi people,

We have a desktop application that is distributed with Java Webstart and works on Win7 machines. Initially, users all connected using a connection by default, so creating shortcuts was not a problem. Now, because of new networking strategies, each user has his own connection.

The problem is that the shortcut to the application is created in the user profile (for example "C:\Users\JohnDoe\", so that other users in the same machine can not run the application unless he or she installs the application again.)

Is there a way to create this shortcut for all users using JNLP API or configuration in the xml file?

If anyone has need of the solution: during installation I save the jnlp file in a directory accessible to all the world and then start the application using "javaws path\to\file.jnlp". More details in How to create a shortcut for java webstart available for all users on Windows 7?-stack overflow

• Adjustment of the farm for all users

My apologies if I missed this answered somewhere, but I couldn't find it anyway. I have a thin client, running vWorkspace AppPortal 8.0. Users to connect individually as opposed to a shared connection. Is it possible for me to load the configuration settings of the App portal for all users?  If I have each log and load the config file.  So basically, I try to have the configuration file to load automatically for all users.  Is this possible?  Thanks in advance.

Hey Kevin,

Just to give due to what Greg said, there is an article here