2 identical e-mails

Similar Questions

• LasetJet M4555 MFP: 221 ftp port and how to disable

  We have a HP M4555 MFP printer that accepts ftp connections on port 221 anoymous and I can't figure out how to make it stop.  This raises red flags with our network security scanner, so would like to know how I can disable this feature.  We have all other than 9100 off printing protocols (including FTP printing), but this one printer always listens to the port 221.  Interestingly, we have 2 printers of the same model and only 1 done this and, as far as I know, they have identical configs.  However, whoever's doing this has rev firmware 3.7, and the one that is not is still the 3.5.1 then perhaps that it is a feature added to the new rev?

  I can't say how much of a security problem is real, but it makes me very nervous that I can get in places like/Customer/Jobs/StoredJobs without any authentication at all.

  Anyone have any ideas?

  Thank you!

  PS. Here is a demonstration of what I see:

  Ftp $221 _HOSTNAME_
  Connected to _HOSTNAME_.
  220 service ready for new user.
  500 syntax error, command unrecognized.
  Name (_HOSTNAME_:root): anonymous
  331 Anonymous access allowed, send identity (e-mail name) as password.
  Password:
  230 user logged in, proceed.
  Remote system type is Windows_CE.
  FTP > dir
  227 entry Passive Mode (10,56,43,70,78,232).
  125 data connection already open; transfer from.
  01/01/98-05:00

  network
  01/01/98-05:00 PRE-LAUNCH
  01/01/98-05:00 CEKERNEL
  01/01/98-05:00 core
  01/01/98-05:00 MachineData
  01/01/98-05:00 customer
  01/01/98-05:00 extensible
  01/01/98-05:00 DataModel1
  01/01/98-05:00 DataModel2
  01/01/98-05:00 CtbData
  01/01/98-05:00 interrupt
  03/05/16 00:53 23 JediCE.src.revision.txt
  03/05/16 00:53 JediAdds
  03/05/16 00:53 23 Control Panel.lnk
  03/05/16 00:53 My Documents
  03/05/16 00:53 program Files
  03/05/16 00:53 documents and Settings
  03/05/16 00:53 Temp
  03/05/16 00:53 Windows
  226 closing data connection.
  FTP >

  You can disable the port 221 using IPsec/firewall option tab 'network '.

  Steps to follow:

  Access IPsec/firewall. Set the default rule to "allow". Start creating a rule. Choose all the "IP address" for the policy address. In the event of service strategy page, choose Create a new service. Then create a personalized service.

  For personal service, give a name like "port221". Select TCP. Choose ' printer/multifunction Service '. Choose a specific local port. Enter the port 221. Choose "Any" to remote port. A new service is created. Select it and click OK. You return to the page of service strategy. Click on the newly created service 'port221 '. Click "next". Choose the action "Drop." Click "next". Enable the IPsec/Firewall policy. When she returned to the home page, IPsec rules were created and activated.

  Thank you.

  I am an employee of HP support of HP Experts who volunteer their time and expertise to help others. The views expressed are my own and do not necessarily reflect the opinions of HP.

  If this helped sloved question please click on the star to Kudos

• How to reset Outlook Express?

  HOW TO ERASE ALL THE NAMES AND START OVER IN OUTLOOK EXPRESS?

  I've listed six identities, none work for sending emails via Outlook Express.  How can I clear all of these ID out when I get the message: no current identity?  So how can I load this new identity hot mail to create a new address book?

  You try to use Hotmail in OE? SE these.
   
  How to configure Outlook Express to use a Hotmail account
  http://support.Microsoft.com/kb/220852

   

  You receive an error message when you use Outlook Express or Outlook to access your Hotmail account

  http://support.Microsoft.com/kb/878462
  

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  http://support.Microsoft.com/kb/813514

   

   

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

   

  To remove the identities, click file | Identities | Manage identities. You can delete everything except the one you are. Delete this one you must first create a new one.

• Hyperion Planning verification options

  Hello

  I'm exploring the different auditing options that can be extracted from planning of database or log files Essbase. We use indigenous groups and externally authenticated users and are version 11.1.2.2

  I have two requirements and would like to hear your point of view if these is possible.

  * Necessary to extract the last opening date of session of a user for planning or SSP db?

  * How to find if an id is admin or no planning or SSP db?

  * Also I am unable to find the table where good names and email addresses are stored. However, I am able to extract web application for the shared services.

  The pointers will be appreciated.

  Thanks in advance

  1. I think you can find a lot of discussions related to the last connection information. I have a ticket on the same (I do not recommend this)

  http://www.orahyplabs.com/2012/07/monitor-last-login-time-in.html

  2. glance at the table HSP_USERS of your Planning application, there is a column called ROLE where 0 is for Admin, 1 = Scheduler; 2 = interactive; 3 = owner. You will then have to join this table CSS_USERS table of Shared Services to get the NAME of the user. (SID at IDENTITY_ID)

  3 CSS_USERS table stores the information of the user (name, identity, e-mail, first & last name...)

  Concerning

  Celvin

  http://www.orahyplabs.com

• Submit button does not work after upgrade

  I've recently updated to Acrobat X Pro and Office 2010.  I'll set up a simple form with a "SUBMIT" button below to send the PDF filled to e-mail the company.  I did this successfully in the past with 9 Pro Extended and Office 2007.  However, now when the button is clicked and the screen asking if I have a desktop or web email client returns, I answer desk, and nothing happens.

  Is this a known problem or I do something wrong?

  Thanks for your help!

  
  Donna

  I steal you response that George gave to a similar question, because it turns out that it applies here as well:

  ************

  George Johnson February 23, 2012 11:17

  

  When you distribute a form, it replaces the e-mail address that you have configured in a submit button with the address that you specified in "Edit > Preferences > identity > E-mail address. So before of you start the process to distribute the form, change the email address it to that you want to use.

  ******************

  This is a ridiculous solution, because this means that I have to do the identity of my personal copy of Acrobat email address of someone else or some other service when I do the form, but whether - at least the form now sends.

• form back to incorrect email, how to fix?

  I have a registration form introduced in LiveCycle that I'm distributes since Acrobat. In LiveCycle the Send button is configured to go to an e-mail, which is also the email, he is sent by when I distribute from Acrobat. However, when a user fills out the form and goes to submit, he wants to go back to my other work email (I have 2 different). This would be fine, except that my email is spelled incorrectely (I work two emails - one is specific to me, the other is for the program I coordinate).

  How can I change this email it is automatically returned to? What is a life cycle problem or a problem with Acrobat?

  Any idea would be appreciated!

  When you distribute a form, it replaces the e-mail address that you have configured in a submit button with the address that you specified in "Edit > Preferences > identity > E-mail address. So before of you start the process to distribute the form, change the email address it to that you want to use.

• Change submit email in the existing form

  I created a form in Acrobat.  I went through the distribution of 'process' and choose to save the form on my computer and send it out manually.  I entered the email so that it would be presented to me by e-mail.  Where and how can I change this e-mail.  I tried everything I could think of and I'm not succeeded!  Help, please

  If you talk about 'Distribution of form', you can change your email address for Acrobat preferences-> identity-> E-mail address and re - distribute the form.

• still, mail. Identity.default.suppress_signature_separator set to True does not work, is their a new patch?

  I still have the '-' applied above the signature even after applying the fix to mail.identity.default.suppress_signature_separator that is set to true. Have tried running Thunderbird in safe mode, always have the same question. Have restart the computer several times, always have the same question. Reading a lot of messages on it, but don't say that it does not work even after you apply the hotfix does not. All of the suggestions. Pure install any extensions or add-in.
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.6.0

  The fixed. completely removed Thunderbird, user and folder programming created by thunderbird profiles. Deleted file folder in windows. Rebooted PC. Installed Thunderbird. Add an account. Went to change only the settings in the config to remove the signature separator. He then worked.

• Have established the identity of the alias in Thunderbird, but when recipient of email click 'Reply to all' it shows my other e-mail of identity

  Hello
  I have set up a default alias identity (call this E2) in my Thunderbird e-mail account. But when I send a message using E2 in the box 'from', when the recipient is a response and selects 'reply to all', my other identity (the actual principal name of my mailbox, call the E1) is displayed in the CC/BC area. I don't want my other email main identity (E1) poster at all when they answer, just E2. Can someone advise? Thank you very much.

  Hi Coco77,

  I've seen in the past that it can also help fill in the reply-to field of your identity with the new e-mail address. Could you please try that?

• I tried to put all my accts 'e' to OE Mail, he mucked up, took the new identity and lost all previous messages... is there a way to retrieve them?

  I tried to put all my accts (MSN, Yahoo) 'e' mail to Outlook Express, lost my original sign in detail, took the new identity and lost all previous messages... is there a way to retrieve them?

  Rosieuk

  Messages are likely to the old identity and you can go to file | Import | Messages to bring them into the new identity.  See also point 4 here: www.oehelp.com/OETips.aspx#4

  The account information will have to be put in place in the new identity.  You can switch between the old and new identities also.  If save you messages and settings (see www.oehelp.com/OETips.aspx#6), you must do it for the two identities, unless the new identity has all the information you need in it.

  Steve

• Windows Live Hotmail does not recognize identity POP3 for mail sent

  I used to receive transferred messages from an Outlook Express e-mail account. Since February, no email was sent.  I get the message that POP3 does not recognize my identity. I tried to change the information, but to no avail. What's past and how to fix this?

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• On XP System I've set up separate e-mail accounts 2 identities but OE puts all mail entering any currently selected identity. How can I do it direct to the relevant identity?

  I recently had to change an old email client I've used for years, Outlook Express on my Windows XP computer. Using the Base of knowledge (including 209169) articles I have set up two separate identities, with each having its own email account information. But when running, whatever the identity is selected both receives all messages for the two identities. This is not the way it is supposed to work, is it? How can I fix this?

  In each identity, go to tools | Accounts. It must only have an account in each. Is this the case?

  If they are both, delete the one that should not be there. If this is not the case, then addresses are aliases for the mailbox and you will need to create message rules to divert mail to its respective identities of Inbox.

• Receive the same e-mails on a continuous basis. I now have in my copies of six mailboxes of identical emails for a total of 305 messages.

  I have recently updated from vista to Windows Live Mail 2011, the problem is that I keep getting the same emails on a continuous and well I have delete the mail it back. I now have in my copies of six mailboxes of identical emails for a total of 305 messages. Even if I delete the same e-mails continue to come back. I reinstalled windows 2011 mail and the problem seems to have worsened. How this can be resolved. The same emails keep on coming and now total 353 emails.

  You are not using Windows Mail, you use Windows Live Mail.

  A question of Hotmail or Windows Live Mail?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/have-a-Windows-Live-Mail-or-Hotmail-question/8bd31c48-d1a7-49D6-a08c-9069aaeba2e5

• Oracle Identity Manager notification e-mail

  Friends
  Can someone help me how configure the Oracle Identity Manager, email notifications, for example when a user is configured in the Oracle Identity Manager, and then launch an email to notify the user that their account has been put in service.
  Where should I enter for this procedure mail server settings.
  Thank you

  Hi JKL.

  Here are some metalink useful in helping to understand the mechanism of notification of IOM.

  Configuring Email Notification for users Oracle Identity Manager created through reconciliation Doc ID: 560808.1
  https://MetaLink.Oracle.com/MetaLink/PLSQL/showdoc?DB=not&ID=560808.1&BlackFrame=1

  An example of e-mail notifications and configure it with a resource object Provisioning Doc ID: 457836.1
  https://MetaLink.Oracle.com/MetaLink/PLSQL/showdoc?DB=not&ID=457836.1&BlackFrame=1

  How to send an email Notification when the user was created through the Administrative Console Doc ID: 780394.1
  https://MetaLink.Oracle.com/CSP/main/article?cmd=show&type=not&ID=780394.1

  Renato.

• I forgot my otlook Express e-mail account for my identity

  I had a brain surgery and I don't remember when I changed my passwword so I'm unable to access my emails, someone at - it an answer to this, I tried

  everything that

  Contact your ISP/Mail Server. They know your password, as it is the same as that you will use to access your e-mail on their Web site.