Oracle Identity Manager notification e-mail

Similar Questions

• Can we have more than one system secure in Oracle Identity Manager?

  Can we have more than one system secure in Oracle Identity Manager?

  Yes we can
  Assume that we are reconciling userid and certain attributes of database and electronic mail, jobcode, city of AD.

  We will have then two trusted resource. We have a number of trusted resource based on the client system.

• A question about the capablities of Oracle Identity manager?

  Hello, everyone,

  Here is our environment,

  1 - we have user accounts in our database for students and employees in our academic Institute.

  2. we have a Microsoft active directory for employees only, that was created many years ago.

  3 - our web applications (weblogic server, ADF, other) use user accounts to database for authentication.

  We plan to create a server active directory for students, we thought about using Oracle identity manager (OIM) to do.

  is it possible to just directly sync & manage student accounts of microsoft oracle database active directory through IOM.

  Thank you.

  Hi mhaljasim ,

  By my understanding, looking for some sort of tool to create users (doing the commissioning) in a target (Active directory). If this is the case, yes IOM will be a great tool for you as it has connector AD that have this capability.

  Trying to help even more: research from the perspective of the solution, my understanding is you will make this workflow:

  (1) created in the Oracle database user. (2) then this user will be reconciled database of IOM, IOM DB connector (in other words, the user will be created in the table user IOM). (3) then IOM will be a process of supply to create this type of user in AD, using the connector of the IOM.

  But I would put another suggestion here:

  If you are looking for just a matter of authentication using the users of the database as well as users of the AD. I want to suggest to look deeper into the OVD (Oracle virtual directory) tool. It is a great tool that allows you to have views of the two targest(AD +DB) at the same time and make a simple Ldap authentication against this specific point of view once. By my understanding, this can be a good option in your solution as well. Please check more on these two IDM products to:

  http://www.Oracle.com/technetwork/middleware/ID-Mgmt/index-093158.html

  http://www.Oracle.com/technetwork/middleware/ID-Mgmt/Overview/index-098451.html

  I hope that this info below helps you a lot,

  Leoncio Thiago.

  http://thiagoleoncio.blogspot.com/

• Error fix Oracle Identity Manager 11 GR 2 PS1 BP01 bundle

  Hi all

  I get the following error when applying BP01 for PS1 OIM11gr2 in section 4.3.1 patch servers Oracle Identity Manager of Managed on WebLogic Server.

  patch_automation:
  [entry] jump entered as property IOM. DBPassword has already been set.
  entry entry jump as mdsDB.password property has already been set.

  wls_property:
  entry entry jump as weblogic_password property has already been set.
  entry entry jump as oim_password property has already been set.

  Run patched sql files:

  BUILD FAILED
  C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.XML:188: The following error occurred during the execution of this line:
  C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.XML:121: Class not found: oracle.jdbc.OracleDriver JDBC driver could not be loaded

  Total time: 0 seconds

  I join my file patch_oim_was.profile.

  # For the passwords if you don't want the password < / optional > in this file just comment out him from here, you will be prompted for him in rumtime.

  Variable #Neccessary of [mandatory] env
  ANT_HOME is C:\Oracle\Middleware\modules\org. Apache.ant_1.7.1
  JAVA_HOME=C:\Java\jdk1.6.0_45
  mw_home = C:\Oracle\Middleware\
  oim_oracle_home = C:\Oracle\Middleware\Oracle_IDM1
  soa_home = C:\Oracle\Middleware\Oracle_SOA1
  WebLogic.Server.dir=C:\Oracle\Middleware\wlserver_10.3

  #weblogic configuration variables
  weblogic_user = weblogic
  #Password is optional, if you want to give on the terminal itself leave what he commented. If not, uncomment it.
  weblogic_password = Weblogic123$
  soa_host = localhost
  soa_port = 8001

  #DB configuration variables
  operationsDB.user = DEV_OIM
  # Password is optional. If you want to give on the terminal itself leave he commented. If not, uncomment it.
  IOM. DBPassword = Sysadm10
  operationsDB.host = localhost
  operationsDB.serviceName = oimdb
  operationsDB.port = 1521

  
  mdsDB.user = DEV_MDS
  #Password is optional, if you want to give on the terminal itself leave what he commented. If not, uncomment it.
  mdsDB.password = Sysadm10
  mdsDB.host = localhost
  mdsDB.port = 1521
  mdsDB.serviceName = oimdb

  oim_username = xelsysadm
  #Password is optional, you can put it here too (and also uncomment the line) oth otherwise leave it as it is and you will get invited to do during execution AsString hidd en
  oim_password = Weblogic123$
  t3 = oim_serverurl: / / localhost:14000

  Thank you

  
  

  I have it... Document Oracle error. Use "/" instead of "------" in windows 7.

  Variable #Neccessary of [mandatory] env

  ANT_HOME = C: / Oracle, middleware, modules, org. Apache.ant_1.7.1

  JAVA_HOME=C:/Java/JDK1.6.0_45

  mw_home = C: / Oracle/Middleware

  oim_oracle_home = C: / Oracle/Middleware/Oracle_IDM1

  soa_home = C: / Oracle/Middleware/Oracle_SOA1

  WebLogic.Server.dir=C:/Oracle/middleware/wlserver_10.3

• Is Oracle Identity Management 11g Patch Set 5 (11.1.1.6.0) required for Essbase

  Media pack Readme for the parts needed to download for the various products of the EMP, Essbase has Oracle Identity Management 11 g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x 86 (64-bit) listed. Can someone please tell me if this is a must have. If this isn't the case, under what conditions do this?
  
  Thank you
  Ted.

  It is not a must have, if you are unsure what is IOM, then you probably don't need it :)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Information data model | Oracle Identity Manager

  Hi all
  
  I'm new to "Oracle Identity Manager" and need some data model information. IOM will be our source to generate a report on Oracle BI publisher. I'm trying to understand the tables involved in the IOM and its level (i.e. column information What data it stored), relationship between the tables.
  
  I tried searching in the documents of the Oracle, but do not have the right information.
  
  Does anyone know on any portal or blog or book oracle reference document, which provide me with this information?
  
  Appreciate if share you it.

  See the Metalink Article: 1164914.1

  -Marie

• To start the Oracle Identity Manager how much RAM is required?

  To start an Oracle Identity Manager and access, how much RAM is required? and with what amount of RAM required.
  
  Tell me any how to set JVM has increased.
  
  Using Oracle VM for Identity manager and the use of the RAM of 1300 provided to the virtual machine. Physical PC with 4 GB of RAM.
  
  My setup will be help to crushed the Oracle Identity Manager without fault?

  You must be at least 3.5 GB of RAM for IOM. Including SOA, it's going to be 6 to 8 GB. See the links in the configuration system supported here:
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/fusion-certification-100350.html

  Kind regards
  GP

• Error in Configuration Oracle Identity Manager

  I used for the Installation of versions:
  
  Version of the software
  11.2.0 Oracle database
  11.1.1.5.0 repository creation utility
  10.3.6 Web logic
  SOA Suite 11.1.1.6.0
  Fusion Middle ware Installer 11.1.1.5.0
  1.6.0_29 JDK Oracle JRockit JDK or Sun JDK Web-logic
  
  Error: Failed to Config Action Oracle Identity Manager Configuration
  
  Waring exception occurs in the web logic Server:
  
  < 14 August 2012 11:57:53 AM GMT + 05:30 > < opinion > < WebLogicServer > < BEA-000360 > < Ser
  worm started operation >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141239 > < the No.
  n-dynamic attribute AuthenticationProviders on weblogic.management.security.Real
  mMBeanImpl@581c390c([OIDM]/SecurityConfiguration[OIDM]/Realms[myrealm]) has been
  has changed. He will have to redeploy or configured restarts entities >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141238 > < a non -.
  dynamic change has been made which affects the AdminServer server. This server m
  UST be restarted in order to consume this change. >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141239 > < the No.
  n-dynamic attribute ControlFlag on weblogic.security.providers.authentication.De
  faultAuthenticatorMBeanImpl@80d076be ([OIDM] / [OIDM] SecurityConfiguration / kingdoms [m)
  (yrealm] /AuthenticationProviders [DefaultAuthenticator]) has been changed. This mastery
  There require redeploying or configured restarts entities >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141238 > < a non -.
  dynamic change has been made which affects the AdminServer server. This server m
  UST be restarted in order to consume this change. >
  
  Please give me a solution to fix the problem

  You can download 11.2.0.2.0 to the last database and through delivery.

  -Kevin

• Oracle identity manager 11g primavera p6 connector

  Please give the download link for oracle identity manager connector for primavera p6

  boyinabox wrote:
  Please give the download link for oracle identity manager connector for primavera p6

  It is included in the P6 tools support and there is no delivery. Hope that you have already solved this request.

  You have correctly configured users IOM to P6 by the p6 connector? I'm trying that. I imported the P6 connector. But problems on commissioning. Hope you could share what you had.

  TIA

  gadba

• From the Cluster of Oracle Identity Manager 9.1.0.2 Application (UX)

  Hello friends,
  I have a question on how to start the Oracle Identity Manager 9.1.0.2 application that is deployed on Oracle WebLogic Server (OWS) 11g on 2 nodes (OIM_SERVER_01 and OIM_SERVER_02).
  What is the procedure to start the administration server, then the nodes where the application is deployed Oracle Identity Manager 9.1.0.2
  I left wondering orders:
  1 xlStartServer.sh
  2 xlStartWLS.sh
  3 xlStartManagedServer.sh
  4 startNodeManager.sh
  
  Thanks for the support...

  Hello

  If the node Manager is configured,

  1. start administration server
  2. Start Node manager
  3. run the two managed server admin server UI.

  Kind regards
  Raghav.

• Block users in Oracle Identity Manager 9.1.0.2

  Hello
  I have a status (locked user) query of the user in Oracle Identity Manager 9.1.0.2.
  The possibility for users to block, seen in the Oracle Identity Manager web administration console appears in the disabled state. As I can enable this feature in Oracle Identity Manager 9. ?
  
  Thanks for the support

  Have not exactly your question.

  Whenever someone tries to login with password wrong, then he gets locked in the IOM. You will need to go to the administration Console and unlock it. You can also do this in DB as well.

  To lock the user to the administration console, you must create a custom button and extend the class action to block this user in IOM.

  Workaround

  Create a UDF called LOCK.
  Create a trigger on this UDF, i.e. whenever changes of true LOCK, then lock the user using query DB or API (UPDATEUSER - user Users.Lock)

• Integrating Oracle Identity Manager with third 9.1.0.2 reported

  Hi friends,
  I installed Oracle Identity Manager 9.1 integrated with different connectors, for this I need to customize some reports. My question is that reports can integrate Oracle Identity Manager 9.1.0.2, according to its parent company of certification
  
  Thanks for the support

  Hi JLK,.

  This discussion below should help you a lot:

  Table-IOM report

  I hope this helps.
  Thiago Guimarães Leoncio

• Unlock the account AD thanks to Oracle Identity Manager 9.1.0.2

  Hi friends,
  I have a question about Oracle Identity Manager 9.1.0.2, I configured the ADC for Identity Manager, you can perform the unlock process when the account has been blocked by Active Directory is not a workstation authentication attempts.
  
  Very grateful for your support

  If you need create your own task you can get the JNDI here code: http://iamreflections.blogspot.com/2010/08/manage-ad-with-jndi-demo-tool.html

  Hope this helps
  / Martin

• corrections to the Enterprise Deployment Guide for Oracle Identity Management

  Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management
  11g Release 1 (11.1.1)
  Part number E12035-06
  
  http://download.Oracle.com/docs/CD/E17904_01/core.1111/e12035/extend_oid.htm
  7.2.2 an additional Instance Oracle Internet Directory configuration
  Step 9 should be oid_inst2 instead of oid_inst1
  
  
  http://download.Oracle.com/docs/CD/E17904_01/core.1111/e12035/extend_ovd.htm
  8.2.2 configure an additional Oracle virtual directory
  Step 8, should be ovd_inst2 instead of oid_inst1
  
  Does this sound right? OTOH, if the manual is OK let me know why.

  You're right, the manual is wrong.

• Oracle Identity Manager Upgrade 9.1.0.2 BP15

  Hi friends,
  I have a question about the upgrade of Oracle Identity Manager 9.1.0.1:
  1. What is the file that allows me to perform the migration of Oracle Identity Manager 9.1.0.2.
  2. What is the patch that allows me to level to BP15 9.1.0.2
  
  Grateful for their support.

  A.1st you need to upgrade to 9102
  1. set at the database level
  2. turn to level the Oracle Identity Manager
  3. put the Oracle Identity Manager Console level

  See the below document for upgrading 9101 to 9102
  http://download.Oracle.com/docs/CD/E14899_01/doc.9102e14764.pdf

  B.Upgrage 9102 to 9102BP15
  1. set at the database level
  2. turn to level the Oracle Identity Manager
  3. put the Oracle Identity Manager Console level

  Famous article of Installer readme document