2 licenses of anyconnect ASA

Similar Questions

• Features licensed on an ASA update

  The device is a Cisco ASA 5520 9.1 (4) running.

  Installing AnyConnect Essentials and AnyConnect for Mobile.

  Already have a license for AnyConnect Premium peer (10 users).

  I was wondering if I can simply install the new AnyConnect Essentials license regardless of the existing license Premium AnyConnect peers.

  I was wondering if the AnyConnnect for the Mobile license recognizes the number of users associated with the AnyConnect Essentials license or license Premium AnyConnect peers.

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited perpetual
  VLAN maximum: 150 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active/active perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  Security contexts: 2 perpetual
  GTP/GPRS: Disabled perpetual
  AnyConnect peers Premium: 10 perpetual
  AnyConnect Essentials: Disabled perpetual
  Counterparts in other VPNS: 750 perpetual
  Total VPN counterparts: 750 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: activated 281 days

  Intercompany Media Engine: Disabled perpetual
  Cluster: Disabled perpetual

  This platform includes an ASA 5520 VPN Plus license.

  AnyConnect Essentials and Premium AnyConnect can exist as the licenses on an ASA, but either one or the other can be used.

  Once you enter the command "anyconnect essentials", it allows to disable all features you may have configured to use the Premium license.

• Issue of license Apex AnyConnect

  Hello

  I have the AnyConnect 25 peers premium license,

  AnyConnect Premium peer: 25 perpetual
  Counterparts in other VPNS: 750 perpetual
  Total VPN counterparts: 750 perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual

  Then, I bought an Apex 50 AnyConnect-user license. I recorded ASA device with number PAK received the following activation key Cisco ASA 5500 Series Adaptive Security Appliance,.

  Premium AnyConnect peers: 750
  Other VPN peers: by default
  Assessment of Advanced endpoint: enabled
  AnyConnect for Mobile: enabled
  AnyConnect VPN phone Cisco: enabled

  It seems to be that I have not 50 but 750 available AnyConnect peers. Why?

  Thank you

  AnyConnect licenses are not additive.

  If you have installed the activation key / license for 50 Apex then you are licensed for 50 users Apex.

  Which replaces the old license that is no longer installed - you can return to it only if you have the old activation key.

• ASA license for AnyConnect

  Hello

  I have a 5525 ASA and I intend to run AnyConnect SSL VPN and IPSec VPN, I think that the license that has already been installed on the SAA does not support the AnyConnect VPN. I have attached a copy of the license details screen.

  Please let me know what type of license should I upgrade if I need.

  Thank you

  A. labarbe

  AliYashar

  5525 platform supports 750 VPN connections, you can see the snapshot.

  The 750 are IPSec VPN connections.

  ASAs all come with 2 Premium SSL VPN (SSL client and clientless) licenses.

  Your option is to go with AnyConnect Essentials (client only) or AnyConnect Premium (customer and client).

  Only 1 of 2 can be active on the ASA.

  I hope this helps.

  Paul

• ASA 8.2: the license upgrade Anyconnect affect current users of IPSEC?

  Hello

  I am preparing to license upgrade of Cisco ASA 8.2 to an anyconnect essentials and mobile. Are there concerns with some users continue to use the IPSEC cisco vpn client, while others migrate to the Anyconnect? I just want if make sure that when I update the license as there is not an immediate requirment to have all users go to Anyconnect immediately. Thank you!

  AnyConnect essentials affects any - IPSEC, but it will disable the portal without SSLVPN client and don't allow the anyconnect SSLVPN client.

  This will not affect your IPSEC remote access clients.

  -Jason

• Issue of license Mobile AnyConnect

  I have an ASA 5505 with a basic license allowing 2 concurrent SSL connections via the AnyConnect client.  If I want to allow two devices to use the AnyConnect VPN connections do I just need to buy two AnyConnect Mobile phone licenses (L-ASA-AC-M-5505 =) and apply them to the 5505?

  Thank you!

  Relative to the issuance of permits, a single license AnyConnect Mobile allows mobile clients to use AnyConnect meets the limit of bonus (in your case) or licenses essential already licensed and active on the SAA. that is, only a reference number unique mobile license must be purchased.

  Of course, you also need to configure remote VPN access.

• AnyConnect ASA cannot access internet or internal network

  After connecting through the client anyconnect 2.5, I can't access to my internal network or on the internet.

  My host has address ip of 10.2.2.1/24 & gw:10.2.2.2

  Here is the config

  ASA Version 8.2 (5)

  !

  names of

  name 172.16.1.200 EOCVLAN198 EOC VLAN 198 description

  DNS-guard

  !

  interface Ethernet0/0

  Description of the EOCATT7200-G0/2

  switchport access vlan 2

  !

  interface Ethernet0/1

  Description of EOC-Inside

  switchport access vlan 198

  !

  !

  interface Vlan1

  Shutdown

  No nameif

  security-level 100

  no ip address

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 1.21.24.23 255.255.255.248

  !

  interface Vlan198

  nameif inside

  security-level 100

  IP 172.16.1.1 255.255.255.0

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain riversideca.gov

  outside_acl list extended access permit icmp any interface inside

  outside_acl of access allowed any ip an extended list

  inside_acl list extended access permit icmp any external interface

  inside_acl extended access list allow interface icmp outside of any

  inside_acl of access allowed any ip an extended list

  access extensive list ip 172.16.1.0 inside_acl allow 255.255.255.0 any

  inside_acl to access ip 10.0.0.0 scope list allow 255.0.0.0 all

  access-list SHEEP extended ip 10.10.10.0 allow 255.255.255.0 10.2.2.0 255.255.255.0

  access-list extended SHEEP allowed ip 10.2.2.0 255.255.255.0 10.10.10.0 255.255.255.0

  IP 10.10.86.0 allow Access - list extended SHEEP 255.255.255.0 10.2.2.0 255.255.255.0

  access-list extended SHEEP allowed ip 10.2.2.0 255.255.255.0 10.10.86.0 255.255.255.0

  IP 10.80.1.0 allow Access - list extended SHEEP 255.255.255.0 10.2.2.0 255.255.255.0

  tunnel of splitting allowed access list standard 172.16.1.0 255.255.255.0

  allow a standard split-smart access-list

  mask 10.2.2.1 - 10.2.2.50 255.255.255.0 IP local pool SSLClientPool

  ASDM image disk0: / asdm - 649.bin

  Global 1 interface (outside)

  NAT (inside) 0 access-list SHEEP

  NAT (inside) 1 172.16.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Access-group outside_acl in interface outside

  inside_acl access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 1.21.24.23 1

  Route inside 10.0.0.0 255.0.0.0 EOCVLAN198 1

  Route inside 192.168.1.0 255.255.255.0 EOCVLAN198 1

  Route inside 192.168.100.0 255.255.255.0 EOCVLAN198 1

  Route inside 192.168.211.0 255.255.255.0 EOCVLAN198 1

  WebVPN

  allow outside

  SVC disk0:/anyconnect-dart-win-2.5.3055-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  internal SSLCLientPolicy group strategy

  attributes of Group Policy SSLCLientPolicy

  value of 10.10.86.128 DNS server 10.10.86.129

  VPN-tunnel-Protocol svc webvpn

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list split-smart value

  yourname.tld value by default-field

  the address value SSLClientPool pools

  test P4ttSyrm33SV8TYp encrypted privilege 15 password username

  username admin privilege 15 encrypted password fOGXfuUK21gWxwO6

  type tunnel-group SSLClientProfile remote access

  attributes global-tunnel-group SSLClientProfile

  Group Policy - by default-SSLCLientPolicy

  tunnel-group SSLClientProfile webvpn-attributes

  enable EOCSSL group-alias

  !

  Global class-card class

  class-map IPS

  my class-map-ips-class

  class-map test1

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  inspect the amp-ipsec

  inspect the http

  inspect the pptp

  inspect the icmp

  Global category

  IPS inline fail-closed

  class class by default

  Decrement-ttl connection set

  my-ips-policy policy-map

  My ips-category

  IPS overcrowding relief

  !

  global service-policy global_policy

  p

  ciscoasa # view the journal

  Syslog logging: enabled

  August 2, 2012 21:34:03: % ASA-6-302014: TCP connection disassembly 60662 for outside:10.2.2.1/62706 to outside:74.125.224.228/443 duration 0: 00:00 0 stream bytes is a loopback (test)

  August 2, 2012 21:34:09: % ASA-6-302015: built connection UDP incoming 60664 for outside:10.2.2.1/49768 (10.2.2.1/49768) at inside:10.10.86.128/53 (10.10.86.128/53) (test)

  August 2, 2012 21:34:09: % ASA-6-302014: TCP connection disassembly 60665 for outside:10.2.2.1/62706 to outside:74.125.224.228/443 duration 0: 00:00 0 stream bytes is a loopback (test)

  August 2, 2012 21:34:10: % ASA-6-302015: built connection UDP incoming 60666 for outside:10.2.2.1/49768 (10.2.2.1/49768) at inside:10.10.86.129/53 (10.10.86.129/53) (test)

  August 2, 2012 21:34:11: % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for tcp src outside:10.2.2.1/62708 dst inside:192.248.248.120/443 refused due to path failure reverse that of NAT

  August 2, 2012 21:34:21: % ASA-6-302015: built connection UDP incoming 60668 for outside:10.2.2.1/50715 (10.2.2.1/50715) at inside:10.10.86.128/53 (10.10.86.128/53) (test)

  August 2, 2012 21:34:21: % ASA-6-302015: built connection UDP incoming 60669 for outside:10.2.2.1/64333 (10.2.2.1/64333) at inside:10.10.86.128/53 (10.10.86.128/53) (test)

  August 2, 2012 21:34:22: % ASA-6-302015: built connection UDP incoming 60670 for outside:10.2.2.1/50715 (10.2.2.1/50715) at inside:10.10.86.129/53 (10.10.86.129/53) (test)

  August 2, 2012 21:34:22: % ASA-6-302016: UDP connection disassembly 60474 for outside:10.2.2.1/50367 to inside:10.10.86.128/53 duration 0:02:01 40 bytes (test)

  August 2, 2012 21:34:22: % ASA-6-302016: UDP connection disassembly 60475 for outside:10.2.2.1/60325 to inside:10.10.86.128/53 duration 0:02:01 46 bytes (test)

  August 2, 2012 21:34:22: % ASA-6-302015: built connection UDP incoming 60671 for outside:10.2.2.1/64333 (10.2.2.1/64333) at inside:10.10.86.129/53 (10.10.86.129/53) (test)

  August 2, 2012 21:34:22: % ASA-6-302014: TCP connection disassembly 60672 for outside:10.2.2.1/62713 to outside:74.125.224.228/443 duration 0: 00:00 0 stream bytes is a loopback (test)

  August 2, 2012 21:34:23: % ASA-6-302016: UDP connection disassembly 60477 for outside:10.2.2.1/50367 to inside:10.10.86.129/53 duration 0:02:01 40 bytes (test)

  August 2, 2012 21:34:23: % ASA-6-302016: UDP connection disassembly 60479 for outside:10.2.2.1/60325 to inside:10.10.86.129/53 duration 0:02:01 46 bytes (test)

  ciscoasa # display vpn-sessiondb svc

  Session type: SVC

  User name: test index: 21

  10.2.2.1 assigned IP: public IP address: 76.95.186.82

  Protocol: Clientless SSL-Tunnel-DTLS-Tunnel

  License: SSL VPN

  Encryption: AES128 RC4 hash: SHA1

  TX Bytes: 13486 bytes Rx: 136791

  Group Policy: Group SSLCLientPolicy Tunnel: SSLClientProfile

  Connect time: 21:26:21 PDT Thursday, August 2, 2012

  Duration: 0: 00: 08:00

  Inactivity: 0 h: 00 m: 00s

  Result of the NAC: unknown

  Map VLANS: VLAN n/a: no

  Tunnel of Split ACL is incorrect, you must add the internal LAN subnets, not pool VPN subnets and also add the correct ACL SHEEP.

  If you try to access the 172.16.1.0/24 subnet, and then add the following code:

  access-list extended SHEEP permit ip 172.16.1.0 255.255.255.0 10.2.2.0 255.255.255.0

  Then the distribution next tunnel ACL:

  list of access split-chip standard permit ip 172.16.1.0 255.255.255.0

  Finally, try to see if you can ping 172.16.1.200 after adding the above.

• IKEv2 VPN without using licensed SSL? (ASA-5512)

  Hi all

  I enabled Cisco 'Anyconnect Premium peers' for customer less connections vpn ssl, the obvious snag is that for Anyconnect ikev2 sessions he wants to use the SSL license pool instead of the IPSEC pool (which I have a lot of connection for 'peers VPN Total: 250' licenses.

  * Is it possible to configure Anyconnect to connect through IPSEC and use licensed IPSEC (while keeping Premium Anyconnect active peers)?

  * Should I consider 3rd third-party vpn outside Anyconnect clients?

  CyA

  Craig

  Remote access to sessions with IKEv2 will always consume a Premium license. Change for another customer will not help unless you change to a customer that uses the legacy technology with EasyVPN. But this should not be the solution.

  If you enable AnyConnect Essentials, you can use AnyConnect with IPSec the platform limit, but you cannot use the features award (as a clientless) more at the same time.

  In a situation like that where many AnyConnect-Sessions are necessary and only a couple of sessions without client, I installed AnyConnectEssentials on the ASA principal and deployed an another ASA only for VPN without client. Due to the high cost of premium VPN licenses, is much cheaper then buying the Premium licenses for all VPN users.

  Sent by Cisco Support technique iPad App

• Licenses of the ASA, a license or two for a failover pair

  I had two units ASA firewall configured as a failover pair.  Now I need increases the SSL VPN license, do I need a licence for the ASA pair or two licenses, one for each unit.  Can use a key of activation on both units?

  One thing I know for sure, put the key on the Active unit, cannot synchronize the license to the standby unit.

  Thank you very much in advance.

  It depends on the version. The ASA 8.3 and later versions, you can share a single license through an HA pair.

• Same license for different ASA SSL VPN

  Hello

  I have run ASA5510 SSL VPN is installed with a license. I want to replace it with the new ASA5510 without SSL VPN license. Is it possible to copy the license from my old ASA? Can I order different license for my new box?

  THX

  Iwan

  A new license is required.

  License key is created based off the serial number of the device.

  Gilbert

  -Rate, if it helps-

• To activate SSL license on cisco ASA

  Hello

  I ordered ASA with 50 ssl licneses.

  But due to the avialibilty of the product it shipping for me.

  I was delivered with the ASA with basic license is to say ASA - Bun - like SSL license K8.Then will take some time I was given a temporary license/activation key.

  Can someone let me know how to enable these licenses to begin work on SSL. My camera isn't in production right now.

  I will get permanent license in 3-4 weeks and still once I need it at this time here for the new license.

  Hope that the procedure would be more or less the same.

  Please guide.

  Reg,

  Sushil

  Sushil

  Check out this doc and come back if you have any other questions.

  Activation of licence ASA

  Jon

• Update license of IPS ASA - SSM

  Hello

  We have an ASA-SSM-20 IPS, the license has expired and we purchased a Smartnet contract for the device.

  I would like to know how to upgrade the license.

  We tried to do the ASDM, and chose the option updates to cisco.com.we got the following error.

  internal error. Unable to send the license request. -4: unable to proxy transparent tunnel. Proxy returns "HTTP/1.1 403 Forbidden.

  How to solve this problem or how to do when you use the other option, how to get the license file.

  Best regards

  It seems that your AIP-SSM20 is configured to use an http proxy to connect to the Internet. If you allow the IP address of the AIP-SSM20 management in your web proxy, it may solve your problem.

  If this isn't the issue, you can always apply a license manually. Download your license file here:

  https://Tools.Cisco.com/swift/LicensingUI/home

  and apply via the ASDM or the CLI

  -Bob

• Migration licenses VPN between ASAs

  I have a X 5515 ASA firewall with VPN client licenses. I also have a spare ASA 5510 with a 25 ASA 5500 VPN SSL user license.

  Simple question: can I migrate licenses off the 5510 on 5515 x?

  Thanks for the ideas

  Jim

  Hello Jim,

  No, it is not possible.

  Please contact [email protected] / * / for more details.

  HTH.

• How to download AnyConnect ASA 8.3 via ASDM

  I tried searching around and a few documents tell me where to go to ASDM but I don't see what they reference.

  I clicked through Configuration\Remote VPN\Network (customer) access\Advanced\SSL VPN access and the doc told me to choose Client settings

  but that does not exist.

  How can I get the client downloaded?

  The ASA version: 8.3 (1) 4

  ASDM Version: 6.3 (4)

  To transfer the files to your ASA using ASDM click on Tools in the top menu bar and select File managementt.

  ONB, file transfer by a click, then choose between a Local PC and Flash.

  Now navigate to the (8.3) file you want to transfer and select them, then click the right arrow to transfer them to the ASA... fact.

  Now navigate in Configuration > VPN remote access > access to the network (Client) > AnyConnect connection profiles

  Check the Enable Cisco AnyConnect VPN Client Access on interfaces selected in the table below

  You now get an error saying that "AnyConnect Client Access cannot be activated without a designated AnyConnect image. You want to designate an AnyConnect image? " Click Yes

  Now click on download , then go to the image of AnyConnect stored on your local computer, select the file, and then click Upload File and finished.

  Now your image AnyConnect is ready for use, simply configure AnyConnect to start using it.

  --

  Please note all useful posts

• Moving from SSL VPN licenses to other ASA

  Hello

  Be gentle, it's my first post.  We currently have an ASA 5520 with 25 remost SSL VPN licenses.  We have also some 5510's unused.  Anyone know if the SSL licenses are transferable to the 5510 unused to the 5520 to increase the amount that the 5520 has?

  Thank you

  Alistair

  Unfortunately the licenses are not transferable to one ASA to another.

  Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp194956

  second indent under the 'Guidelines and additional Limitations' section)

  Hope that answers your question.