Same license for different ASA SSL VPN

Similar Questions

• DHCP relay for users (ASA) SSL VPN

  I have ASA 5520 vpn endpoint. Before asa, there are firewalls which translates the public ip address to the private sector and to pass SSL traffic to ASA. I have configured DHCP relay to get the IP address for the DHCP in Windows Server users:

  dhcprelay Server 10.100.2.101 on the inside

  dhcprelay activate vpn

  dhcprelay setroute vpn

  and it does not work. with the local pool, it works fine. Should I do something else? When I turn on debugging it has not any activity.

  You try to assign the IP address to the SSL vpn client using the DHCP server?

  If so, you don't need these commands contained in your message.

  Basically, you need to set dhcp server in tunnel-group and dhcp-network-scope in group policy.

  Here is an example of Ipsec client. Setup must be the same.

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080a66bc6.shtml

• ASA SSL VPN with RSA authentication

  All those implemented SSL VPN on a device of the ASA using remote Securid tokens? The technical sheets indicate native RSA can be used for authentication, but this works with SSL VPN?

  Thank you

  Try this link

  http://www.Cisco.com/en/us/products/ps6120/prod_release_note09186a0080688004.html

• Cisco ACS 5.1 and ASA SSL VPN change or notify the expired password

  Hello

  Now, my ACS and ASA related to RADIUS (MSCHAPv2). I've set up password life on GBA and password management on SAA. But Cisco ASA did prompt change or whatever it is to notify when the user tries to log on with Clientless SSL VPN. Could you advice me everything to change, or notify the expired password?

  

  PS.

  I check change password on the first login of th on ACS this confirmation of the ASA to change password dialog box. But I want change or warn when the expired password

  Thank you

  The default password is marked as disabled after expiry

  I think that there is an improvement for this in the 5.2.0.26.2 patch and above, which includes the following:

  CSCtk32168: Add an option to change the password when the password expires (T + and Radius)

  After you install this hotfix, you get an option to the user authentication settings is:

  -Disable the user account

  -Expire the password

  When the expiration period is exceeded

  If password is expired then user will be asked to change password next authentication

  Note this latest patch for 5.2 is 5.2.0.26.4. All patches are cumulative

• ASA SSL VPN

  SSL VPN reliable, efficient and safe option for traffic from internet users on e-commerce sites where there may be user sessions 2000 per second from all over the world.

  Thank you.

  In my opionon - SSL is reliable, efficient and safe if not all banks around the world would not use it for online banking.

  HTH >

• Additional license for different operating system?

  I have Lightroom 5.7 on my home PC, running Windows 7. I intend to get a small laptop for travel, maybe a Macbook Air. I have to pay for another license for the different operating system?

  If you have only 1 installation, you don't need a separate license. If I remember correctly 1 license should support 2 computers, a laptop and a desktop computer with different operating systems.

• Can you change text of reversal in the same range for different triggers?

  Hi, I have not used Fireworks since version 3, which was about 6 years ago when I dabbled in web development.  My past has turn against me, and I need to make a pretty simple site quickly enough for my boss.  I myself have CS4, and now that I understand that you can only use the buttons for disjoint bearings, I begin to make progress...

  What I want to achieve, is that there are 6 "buttons" on my page, which, when they you flipping them will display the text in a box on the side.  I would use separate boxes for each button, but there is not enough space on the page, because there is a lot of text, so I would use a box at the same place to display all 6 texts, according to which the button is reversed.  Is this possible?

  I have no doubt entirely my head layers round and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right drill bit using the product?

  Because the reversal disjoint button does not work, I created 6 slices for triggers.  I first tried the hot spots, but could not use them as I want as a direct substitution trigger the filter effect.

  Yes, you can trigger the different content on the postponement of several other sections.

  It is easier to show the describe statement, so here is a sample file that does what I think you are looking for:

  (1) six buttons

  (2) each button a unique text

  (3) each button corresponds to a rollover State

  (4) single text appears in the same place for each button on turnover

  I hope this helps!

  Dave

  Right-click and save the image below - it's a Fireworks source file:

  

• ASA5505: Configure the ASA for IPSec and SSL VPN?

  Hello-

  I currently have my 5505 for SSL AnyConnect VPN connections Setup.  Is it possible to set up also the 5505 for IPSec VPN connections?

  So, basically my ASA will be able to perform SSL and IPSec VPN tunnels, at the same time.

  Thank you!

  Kim,

  Yes, you can configure your ASA to support the AnyConnect VPN IPSec connections and at the same time.  In short, for the configuration of IPSec, you should configure at least a strategy ISAKMP, a set of IPSEC, encryption, tunnel group card processing and associated group policy.

  Matt

• Same package for different teams?

  Hi, we have several clients in the same environment/area and we want Don t to create 4 different packages of Photoshop CC (exactly the same thing with Creative Cloud packed Packer).

  If we use the CCP with a generic Adobe account and pack these applications for teams, may all our connection of different customers in the app with their own accounts or we will have problems of licenses?

  Or do we need to pack the apps and be logged on as a member of the team who will use the app?

  If you perform a deployment of the named user where each user connects to the license of the software, then your approach should work fine. The sign in during the creation of a package is not the software under license, it combines just you to an organization so that Packager knows that you are eligible to be deployed.

• Same result for different frequencies?

  Hi all

  I'm new to labview and the communication kit, so I'm trying to test the examples.

  When the example of 'Rx Continuous Sync or Async' opening and it works I get the same output on the "power spectrum".
  i'm checking different frequencies in the range of 1.2 GHz to 6 GHz.

  How is it possible then that there is nothing transmitted? -> checking with the android application for wifi channels (channels 1 to 8 are used, all others are not...) and yet labview gives me the same result... (attached file = 2 GHz, the other is a comparison of the 5 GHz, 2,412 GHz and 2,484 GHz)

  material:

  NEITHER USRP N210 (rev 4)
  CBX 1200-6000 MHz Rx/Tx (40 MHz)
  Antenna VERT900

  connecting via gigabit

  PC: W7 64 bit, i7-2600 to 3.4 GHz, 4 GB RAM

  Thanks in advance

  Hey insiderbe,

  I did some research on the Ettus forum and found the following:
  https://lists.gnu.org/archive/HTML/discuss-gnuradio/2010-08/msg00237.html
  https://www.Ruby-Forum.com/topic/214890

  I suspect that the IPS you see on 0Hz is the DC offset that is introduced to the ADC of the USRP N210. We can confirm this by removing air and closing the RX. If the tip is still there, it's a feature of the analog input circuit.

  Brian of Ettus recommends tuning your frequency slightly out of your signal of interest and using a high pass filter to remove DC offset. I recommend looking at the second link for more information.

  With respect to obtaining the value of art through many different frequencies, I think that it is a property of the antenna used. The VERT900 is valid from 824-960 MHz and 1710-1990 MHz. can you listen to one of these groups and test your power, even if you have a known signal? You have another USRP generator or a function to generate a known signal?

  https://www.ettus.com/product/details/VERT900

  My last concern use the N210 with the CBX in LabVIEW Communications. According to the Readme, it's an unsupported hardware configuration, which means that R & D has not tested the configuration, and we do not know how the configuration will occur.

  http://download.NI.com/support/softlib//RF/NI%20USRP/15.0/niUSRP_readme.html

  Thank you for this post!

  Kind regards

• ASA SSL VPN problem with 8.2 (2)

  Hello everyone,

  I have a couple of ASA 5520 image 8.2 (1) running in active failover mode / standby.

  A few months ago, I downloaded the 8.2 (2) on the cisco website and charge to the ASA.
  After loading the new image, they called me for problems
  functioning of the application of webvpn.

  The web app seems to work, but in a mode of read-only, because you could not

  change the content of the files.

  I couldn't find a way to make it work, so I decided to downgrade to 8.2 (1).
  and as I loaded it the old image, the problem disappeared.

  Now I see that it is available the image 8.2 (3).
  To avoid the risk of hard work I tetsted on a piece of spare 5510, and with the disappoint, I found
  the problem was the same.

  Everyone is facing such a problem or can suggest me how to solve?

  Thanks in advance.

  Marco.

  Can you please provide more details about what application does not work through WebVPN interface without client?  Have you tried to activate Smart Tunneling for this application?

• Multi frame ASA SSL VPN Question

  Hello

  We have a pair of firewalls, we do multiple contexts on clients.  We have recently updated their and have been using the newly Anyconnect customer support.  This all works fine but I feel I'm missing something.  If the customer does not have the anyconnect client already how do get?  Normally, you go to the web page and it will download the client, but all I get is "Clientless VPN is not supported in context mode Multiple." which is good, but how is the customer supposed to to get the customer in the first place?

  Any information would be helpful.

  Chris L.

  Hi Chris,

  The AnyConnect WebLaunch feature is not supported in ASA running on multi-contexte mode.

  There is a demand of improvement that has been opened to allow this as other characteristics while ASA in multi mode context. Here is the link, you can refer:

  https://Tools.Cisco.com/bugsearch/bug/CSCuw19758/?reffering_site=dumpcr

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Cisco ASA (SSL VPN)-based user portal?

  Hi all

  I am looking for a solution, different portals (WEBVPN) that can be assigned to different users.

  For example:

  -'test1' user and see the portal "-1".

  -user "test2", "test3" connect and see the portal "-2".

  I know, it can be done with the alias for each portal entry, but I want a transparent solution for the user (such as Juniper SA2000).
  In addition, it should be possible to authenticate via RADIUS (no local authentication on the SAA).

  Who did such a set upward?

  Thank you

  Norbert

  Hello

  The attribute 25 (it's called 'Class') and set its value to UO = MyVPNGroupPolicy where MyVPNGroupPolicy is the name of your group strategy in the SAA.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Pay the license for different user

  Is it possible to pay monthly fees for Photoshop for a certain user through my account and leave the user connect via its own (new) account?

  The cloud as a gift https://forums.adobe.com/thread/1665610

• Disable SSL VPN license

  Hello

  I have 2 5510 ASA and I'm in a pinch with needing a failover ASA to implement. I have an ASA test I put in as a firewall waiting in an active scenario / in sleep, and this ASA a user 10 SSL VPN license applied. My ASA primary I'll put this in place with only 2 standard user and fails it of Wizard config HA when I run through it. The message I get is "Test of compatibility of the license for many clientless SSL VPN peers has failed." How can I deactivate the license 10 user on my unit of analysis so I can bring it failover?

  The two ASA have a license of SecPlus.

  Thanks for any help,

  Brett

  Keep your current activation key you can reapply after your tests, and request a new activation key of [email protected] / * / unlicensed SSL VPN to test your failover.