2 ports SATA and 3 not supported.

Similar Questions

• I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  Do you still have the MBP? If so you can manually copy and paste the files you need.

  If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

• How can I load my photoshop CS6 cd to a new Macbook that has no cd slot and does not support the cd drive external mac.

  How can I load photoshop CS6 on a new macbook, which doesn't have a cd slot and does not support the cd drive external mac? I have the original cd of the program.

  Jake

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• Have bourght an Adobe acrobat pro set DC improved and it not support Acrobat Pro 9. It was NOT indicated, so please inform me how I can use this upgrade

  Have bourght an Adobe acrobat pro set DC improved and it not support Acrobat Pro 9. It was NOT indicated, so please inform me how I can use this upgrade

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Confirming that vsphere 6 requires flash and does not support a customer to RHEL6/firefox?

  Hello

  My reading leads me to conclude that vsphere 6

  1. always requires flash

  2. can't access customer to RHEL6, either native one or through firefox

  Is this right?

  Thank you

  Hi mips,

  Yes, 'officially' the vSphere Web Client 6.0 does not support the RHEL6 and requires flash to operate. However the following may be of interest (even if it is for 5.5): KB VMware: cannot open the vSphere 5.5 Web Client in a browser on a Linux-based desktop

• HP DL360p Gen8 - 1 Gb Ethernet 4 ports adapter HP 331FLR not supported?

  Hello

  We buy the little couple of servers HP DL360p Gen8 for a virtualization project. The waiter came with Ethernet HP 1 GB 4 ports 331FLR adapter (FlexiLOM). When I try to install the complete U2, this facility ESXi4.1 and shows the error that "2726: there is no network card on this host. When I checked with the HP Web site for this NETWORK card, VMware vSphere 4.1 is supported and the server model is supported in VMware HCL. The strange thing is that I tried to filter the devices supported the IO in HCL using the model of network card, this adapter is not existing in the supported i/o devices. Also, I had no chance to find the driver for the NIC. However, I know that I can not use versions of pilot ESXi or is anyway to install it?

  Finally, I replaced the 331FLR with the Intel Pro 1000 card card and continued my installation. I would like to know that anyone had the same experience and found the solution for this NIC support.

  Appreciate your answers,

  Thank you

  Shan

  Hi Shan,

  You must install this server with the HP installation ISO (including the necessary drivers) custom.

  See my HP & VMware links to the relevant download links page.

  -Andreas

• Connect on Skype does not work and is not supported.

  I know that my name.

  I know my address.

  I know my password.

  I can login to this forum.

  I can't sign in to Skype.

  I don't want to change my password again.

  I'm tired of going round in circles with the 'support '.

  Is there an alternative that works well?

  $ uname - a

  Harveyp 3.2.0 - 94-generic-pae #134 - Ubuntu Linux SMP Fri Nov 6 18:45:23 UTC 2015 i686 i686 i386 GNU/Linux

  Harvey

  There is a significant delay between the definition of passwords on Hotmail and using them to access Skype. Today, I had absolutely no problem connection!

  This issue 'Closed', thank you.

• 20225 port and printer not installed error

  I installed Adobe Pro 7 on my new system with windows 7 on it and received an error 20225 port & printer not installed. How can I fix it?

  Hi Grandpappy3,

  Acrobat 7 has not been tested and is not supported on the Windows 7 computer.

  Please view to buy the last Acrobat 11 subscription.

  Kind regards

  Rave

• How can I get FireFox to work on the first Google ChromeBook addition? He repeats to me upgrade and when I do it says does not support?

  How can I get FireFox to work on the first version of the Google ChromeBook? Everytime I open it it said to update or upgrade to FireFox and make it your main page. So I downloaded it and it's open once it is installed, but then a message appears that says "can't stand" search for an application that supports FireFox and its software, or something of the sort. I was sitting here with a full battery when I started and now it is dead... and I still don't have FireFox on my ChromeBook.

  What do I do now or how do I get it to work? And if it just simply won't work on a CHromeBook then they need to have that riht out in the open.
  

  Hello

  I had a peek in this and was informed that Firefox does not work on Chrome OS.

  It is designed and done a little differently from the likes of Windows and Linux and will not support another browser being installed.

• save some documents that I go to the Gallery of windows and then used open: said he did not support this format. Why?

  I have Notepad and saved the words for example and then when I try to display, windows Gallery stands up and says not supported with this format.  Why?

  Hi jackiechavez

   

  1. you save the files as text (.txt) file type?
  2 have you tried registering the information in the Microsoft word document?
  3. the problem occurs with any other information saved in Notepad or another Notepad file?

  I suggest to save the Notepad document into a txt file and then try to open the file. To work around the problem, you can also try saving the information in Microsoft word document (.doc) format and then check if the document opens correctly.

   

  I hope this helps.

• drive E is not supported... Light sensor is damaged... cdfs is disabled?

  I recently had a computer error that my data were critical... a sudden loss of power to the local drive, who said: I've lost kernel-power.  Now it won't work at all. Do I need a new hard drive?  Drive is more than the C drive and is not supported.  Also, they said that I should reinstall the driver but I can't find one on the internet, it is a new one called Sata something...

  I tried solutions: a chkdsk, reboot in safe mode and many downloads.

  You may need to replace the disk, but first we need a little more information.  Are you sure that this drive is a hard drive and not a DVD/CD player?  If it is a hard drive, what happened when you tried chkdsk?  One thing I would recommend is that you get some drive from Western Digital or Seagate Diagnostics and try.  If diagnostics say to replace the disk, then you probably need to.

  If you do not have spare batteries for your computer, you can invest $50 or more and get a.  That would be probably saved you of this problem.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Applications not supported

  I bought an app a couple of days and had a problem.  I asked the support and said he was is no longer supported and it seems, that it has not been supported since approximately 2013.  They have also increased the price in the last two days.  It doesn't seem fair that they still sell apps that have problems and are not supported.  It's the whole line icollect.  I also tried to write a comment and it is not the case.

  Is it possible to report it so it can be removed from the app store?

  Even this site is difficult to find your way around.

  Developers of cease to support some applications occasionally, there is nothing you can do about it.

  On the fluctuation of prices, Apple has recently decided to review the App Store pricing in a number of countries.

  tries-within-72-hours-due-to-exchange-ra http://TheNextWeb.com/Apple/2016/01/18/Apple-raising-the-price-of-apps-in-7-Coun...

  If you still need help, it is best to communicate directly with the Apple Support:

  Contact Apple for support and service - Apple Support

• Microsoft Bluetooth Notebook Mouse 5000 appears as mouse HID-complaint only, and does not appear in Intellipoint correctly

  I just installed the mouse on my laptop Dell D820 running Windows 7 Ultimate (all the fullyy patched)

  The mouse is recognized by the system and displayed both Bluetooth devices and devices windows with the correct name: Microsoft Bluetooth Notebook Mouse 5000.  It works also.

  However when I open Microsoft Mouse and go to the tab buttons, it is reported no. Microsoft USB mouse detected which means that I can not configure the buttons, etc.

  And when I go to the Hardware tab reports the mouse as a mouse HID-complaint that is so, it also appears in Device Manager.

  So far I have tried:

  • Remove the mouse, and then reinstall (in a number of different ways).  When he returned, he is reported as 'unidentified device' and the device driver indicates a driver installation failed
  • Uninstalling and reinstalling Intellipoint - latest version downloaded and installed to sweat
  • The mouse of uninstall, reboot and reinstall the mouse

  All very irritating.   Any suggestions to get the system fully recognize the mouse, please

  See http://www.microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=099&active_tab=systemRequirements.

  IntelliPoint is not necessary and does not support the Bluetooth Notebook Mouse 5000. The buttons are not configurable.

  There are some other Bluetooth Microsoft mouse which are supported by IntelliPoint, and the buttons can be configured.
  See http://www.microsoft.com/hardware/mouseandkeyboard/ProductList.aspx?type=Mouse&techId=Bluetooth

• Why lightroom cc gpu does not support mac HD4000?

  Version of Lightroom: CC 2015.5 [1067055]

  License: Creative Cloud

  Operating system: Mac OS 10

  Version: 10.11 [3]

  Application architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.3 GHz

  Built-in memory: 16 384.0 MB

  Real memory for Lightroom: 384.0 MB 16

  Real memory used by Lightroom: 558,1 MB (3.4%)

  Virtual memory used by Lightroom: 1 045,8 MB

  Memory cache size: 279.7 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX

  Exhibition: 1) 2560 x 1440

  Graphic processor News:

  Check the supported OpenGL: failed

  Seller: Intel Inc.

  Version: 4.1 INTEL - 10.12.13

  Rendering engine: Intel HD Graphics Engine OpenGL 4000

  LanguageVersion: 4.10

  It is simply not fast enough to bring any gain or it is too old and does not support the features of OGL.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• Broadcom netxtreme 57xx gigabit ethernet is not supported to install esx 3.5

  Hello

  I use my laptop Dell E5420 workstation 6. When I try to install esx 3.5 in my computer, it's show error message as port of networking is not supported. Then I tried to install esxi 3.5 in the same system. His installation, but I have not found all of the network adapters. Physical system I have broadcom netxtreme 57xx gigabit ethernet. I changed little in vmx file, but not all.

  Please help me

  I hope that you use WS 6.5?
  you will miss at least the line

  ethernet0.virtualDev = "e1000".

  Take a look at this vmx - worked in nice on Workstation 6.5

  config.version = '8 '.
  displayName = "esx35i."
  ethernet0. Present = 'TRUE '.
  ethernet0.virtualdev = "e1000".
  Ethernet1. Present = 'TRUE '.
  Ethernet1.virtualdev = "e1000".
  floppy0. Present = "FALSE".
  guestOS = 'other '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-image".
  IDE1:0. FileName = 'VMware-VMvisor-InstallerCD - 3.5.0 - 82664.i386.iso.
  IDE1:0. Present = 'TRUE '.
  memsize = "1024".
  Monitor.virtual_exec = "hardware".
  monitor_control.restrict_backdoor = 'true '.
  numvcpus = '1 '.
  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  scsi0:0. FileName = "esx35i - system.vmdk".
  scsi0:0. Present = 'TRUE '.
  Sound.Present = "FALSE".
  virtualHW.version = "6".