HP DL360p Gen8 - 1 Gb Ethernet 4 ports adapter HP 331FLR not supported?

Similar Questions

• 2 ports SATA and 3 not supported.

  Hello

  I have a dell Dimension E520. This map of mother of computers has four visable Sata Ports and five lists in the Bios. My problem is that I bought a new DVD burner and you want to keep the provided reader with unit so this model has an extra Bay to put a CD or DVD extra in but drive Sata 2 ports and three are disabled in the bios and there is no option to activate. So, I'm just not lucky to have two players or drives in my computer all together because of the bios software, or can someone help me.

  
  

• Broadcom netxtreme 57xx gigabit ethernet is not supported to install esx 3.5

  Hello

  I use my laptop Dell E5420 workstation 6. When I try to install esx 3.5 in my computer, it's show error message as port of networking is not supported. Then I tried to install esxi 3.5 in the same system. His installation, but I have not found all of the network adapters. Physical system I have broadcom netxtreme 57xx gigabit ethernet. I changed little in vmx file, but not all.

  Please help me

  I hope that you use WS 6.5?
  you will miss at least the line

  ethernet0.virtualDev = "e1000".

  Take a look at this vmx - worked in nice on Workstation 6.5

  config.version = '8 '.
  displayName = "esx35i."
  ethernet0. Present = 'TRUE '.
  ethernet0.virtualdev = "e1000".
  Ethernet1. Present = 'TRUE '.
  Ethernet1.virtualdev = "e1000".
  floppy0. Present = "FALSE".
  guestOS = 'other '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-image".
  IDE1:0. FileName = 'VMware-VMvisor-InstallerCD - 3.5.0 - 82664.i386.iso.
  IDE1:0. Present = 'TRUE '.
  memsize = "1024".
  Monitor.virtual_exec = "hardware".
  monitor_control.restrict_backdoor = 'true '.
  numvcpus = '1 '.
  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  scsi0:0. FileName = "esx35i - system.vmdk".
  scsi0:0. Present = 'TRUE '.
  Sound.Present = "FALSE".
  virtualHW.version = "6".

• How many ethernet modem ports should have to support the airport Time Capsule

  I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

  One (1)

• HP m8120n no Ethernet in the Device Manager and not detected

  Hey all:

  I have a desktop HP Pavilion Media Center m8120n (product sheet here) and I recently did an installion of installation clean factory, Windows 7 Pro 64 bit with a DVD retail of Windows. I managed to get the drivers for almost everything, but there are some persistent problems.

  The most serious of them is Ethernet. I can't find drivers ethernet for this machine, even after the update of Windows running several times, no hardware drivers have been found. The ethernet controller/port is not still appear in Device Manager at all!

  I tried to use the driver for this calculation pager on the HP support site, but there is no mention of all the Ethernet/LAN drivers at all.

  I read that sometimes it is important to update the chipset first driver in order to get the job of ethernet. Since HP provides no chipset driver, I decided to try updating the chipset 8120n with theutility to update Intel drivers Intel's Support page.  I have updated to version 9.4.0.1017, once the Web page has scanned my system. However, even after the update the chipset and Windows restarts, I have still no Ethernet at all.

  Depending on the product specifications page, under the section network, the computer uses a controller Ethernet Intel 82566DC. However, after trying to install the driver for the Intel 82566DC since the Intel, the installer website told me that no network controller Intel were present on the system.

  What is really worrying, is that not only does the Device Manager does not even see an Ethernet controller, but the Intel drivers update utility didn't recognize it under the section "Wired" after that the latter had analyzed my computer. Ethernet controller also does not appear under system information.

  I'm starting to wonder if it is a hardware issue and not a driver problem at all! The Ethernet port may be damaged or does not work for Windows do not install the drivers, or even recognize it.

  Does anyone have advice or steps I could take to rule the hardware problem and find a driver that works for my installation of Windows 7 on this computer?

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  Good new! It worked! It was really the BIOS that was causing the problem.

  On the Advanced Settings tab, there is an entry called Onboard LAN off, just like the desktop I have to work!

  After booting, Windows installed the drivers for it right away, and now I get to enjoy this sweet Gigabit speed on my network!

  I'm so happy that it was not a hardware problem, and that it was a simple change to the configuration of the BIOS.

  Thanks for all your help!

  I'm as resolved marker.

• Laboratory of port security exercise - do not behave as expected.

  Hello

  I'm working on a CCENT training lab to demonstrate the configuration of port security.

  I have a Catalyst 3550 switch software Cisco's IOS, software of C3550 (C3550-IPSERVICESK9-M), SE Version 12.2 (52), VERSION of the SOFTWARE (fc3). I have two computers connected on ports fa0/1 and fa0/2 with IP addresses of 10.0.0.20/24 and 10.0.0.12/24 respectively. Without active port security, each computer can ping successfully the other.

  As soon as I change the configuration to add port security on fa0/1 I am not able to ping between the two computers, nor can I ping 10.0.0.20 from the console of the switch, but I don't know why! If I delete it again the pings succeed again.

  I expect that the switch must learn the computer connected to fa0/1 MAC and stop if there is subsequently any traffic from another Mac.

  Interestingly, the 'show mac address-table' command shows that the MAC connected to fa0/1 when port security is not enabled. I don't know if this is relevant.

  Can someone help me diagnose what is happening?

  Thank you.

  Configuration before change:

  interface FastEthernet0/1

  switchport mode access

  Speed 100

  full duplex

  spanning tree portfast

  !

  interface FastEthernet0/2

  switchport mode access

  Speed 100

  full duplex

  spanning tree portfast

  !

  Configuration after modification:

  interface FastEthernet0/1

  switchport mode access

  switchport port-security

  Speed 100

  full duplex

  spanning tree portfast

  !

  interface FastEthernet0/2

  switchport mode access

  Speed 100

  full duplex

  spanning tree portfast

  !

  Other diagnoses (after change):

  S1 # show ip interface brief

  Interface IP-Address OK? Method State Protocol

  Vlan1 10.0.0.5 YES NVRAM up up

  FastEthernet0/1 no YES unset upward, upward

  FastEthernet0/2 not assigned YES unset upward, upward

  #show S1 port-security

  Secure the security Port MaxSecureAddr CurrentAddr SecurityViolation Action

  (County)       (County)          (County)

  ---------------------------------------------------------------------------

  FA0/1 1 0 0 stop

  ---------------------------------------------------------------------------

  Total addresses in the system (with the exception of a mac per port): 0

  Limit Max addresses in the system (with the exception of a mac per port): 5120

  S1 #show - interface fa0/1 port security

  Port security: enabled

  Port State: Secure-up

  Mode of violation: stop

  Aging time: 0 mins

  Type of aging: absolute

  Aging of SecureStatic address: disabled

  Maximum MAC addresses: 1

  MAC addresses total: 0

  Configured MAC addresses: 0

  Sticky MAC addresses: 0

  Last Source address: Vlan: 0000.0000.0000:0

  Security Violation count: 0

  S1 #show interfaces fa0/1

  FastEthernet0/1 is up, line protocol is up (connected)

  Material is Fast Ethernet, the address is 000f.f796.d781 (bia 000f.f796.d781)

  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  KeepAlive set (10 sec)

  Full-duplex, 100 MB/s, media type is 10/100BaseTX

  input stream control is turned off, output flow control is not supported

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry exit ever, 00:00:01, blocking exit ever

  Final cleaning of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0

  Strategy of queues: fifo

  Output queue: 0/0 (size/max)

  5 minute input rate 0 bps, 0 packets/s

  5 minute output rate 0 bps, 0 packets/s

  3494 packets input, 587250 bytes, 0 no buffer

  Received 1593 broadcasts (0 multicasts)

  0 Runts, 0 giants, 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  0 watchdog, 1254 multicast, break 0 comments

  entry packets 0 with condition of dribble detected

  39631 packets output, 3311977 bytes, 0 underruns

  0 output errors, 0 collisions, 1 interface resets

  0 babbles, collision end 0, 0 deferred

  carrier, 0 no carrier, lost 0 0 output BREAK

  output buffer, the output buffers 0 permuted 0 failures

  #show mac address table S1 | include DYN

  1 b827.ebed.e2d9 DYNAMICS Fa0/2

  S1 #show ip arp

  Protocol of age (min) address Addr Type Interface equipment

  Internet 10.0.0.12 5 b827.ebed.e2d9 ARPA Vlan1

  Internet 10.0.0.5 - 000f.f796.d780 ARPA Vlan1

  Internet 10.0.0.20 32 10dd.b1f1.0c64 ARPA Vlan1

  Do you have any other platform to configure your lab? because it should work ideally and the configuration is fine. However, to complete your lab, you already have workaround...

  I suspect that this question is something related to the hardware you use or due to a BUG.

  Please note the useful comment

• Intel Quad Port Adapter AND

  How the 4 ports on an Intel Gigabit AND Quad Port adapter do not appear on ESXi?

  They appear as individual Ethernet Nics or if they present another way.

  I want to add 4 ports on my machine of ESXi.

  I discovered that I can not use LACP entirely in ESXi so my only other option is to direct connection my NAS units through their own nic on ESXi.

  So in summary, I need 4 Gigabit ports assigned to a VSwitch.  Each will be assigned to a SAR unit.  In this scenario, the AND will work as I think it does?

  FYI, I have and available PCI - X slots and only one only PCI-E 8 x, where my choice of the adapter.

  Thanks for any information you can provide.

  They will appear individually.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• Ports USB 3.0 not recognized on HP Pavilion G6-2245sq

  I recently bought a HP Pavilion 2245sq G6 and I encountered a problem with USB 3.0 ports. They are not recognized in the Device Manager. I installed some drivers (Chipset, graphic, Synaptics and so on) and it seems that it did not help with my problem. I confess that I have not tried all the solutions I found in the different posts here on the forum because I think that these specific solutions for laptop. Can someone help me please?

  Furthermore, I believe that I can't have the latest drivers because I am running Windows 7 Ultimate 64 bit and I can only find Windows 8 drivers on the official website.

  I also tried to find a driver for them using Windows Update Driver command in Device Manager and it says that it manages.

  Here is the USB 3.0 for Windows 7 64-bit driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

• 3 USB ports on 4 does not work on Satellite A660-12th

  Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

  My laptop is a:
  Satellite A660-12th
  Reference: PSAW3E-02700GFR

  I almost tried everything:
  -reinstall all drivers
  -Uninstalling the root USB controller and restart the computer
  -Finally to format my laptop and clean reinstall.

  -3 ports still does not work and I do not know how to solve them.

  I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

  Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
  How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

  Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
  The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• USB ports do not support iTunes synchronization.

  I am running XP Prof ~ SP3. My new Iphone 4 is having 2 issues with synchronization.

  It will not be synchronized. Initially, they said my power cord was bad and I replaced it. So they thought that I needed to update current XP SP ~ but it is running 3. They felt that the USB ports, front and rear on the computer, did not support the action of synchronization. Have you heard of this?

  The other is perhaps a question that I usually leave the computer and it does not update enough. I can answer!

  Hi eco lib.

  The phone appears on the computer?

  You can check if the following Apple article helps.

  IPad, iPhone or iPod touch with iTunes synchronization

• Dell Vostro 3550 USB PORT don't DO NOT WORK

  Hi all

  I recently bought the Dell Vostro 3550 (2 days back) and I just realized that only one of the 3 usb ports work.

  1 USB PORT at the BACK (USB 3) does not

  1 LAW of USB PORT (USB 3) does not

  1 works of LEFT USB (USB 2)

  LEFT 1 USB PORT (USB 2.0 / SATA) WORK

  Why not the other. I even updated the BIOS. HELP PLEASE

  Hello

  I recommend you to try the following steps to check the USB ports. First of all I recommend uninstalling and reinstalling concentrators root USB from Device Manager. Please follow the steps below to reinstall the USB root hubs:

  • Click Start, in start search type Device Manager and press ENTER.
  • Expand Bus USB controllers.
  • Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  • Restart the computer and check.

  If the USB ports still do not work, please click the link below and download the USB 3.0 host controller.

  http://Dell.to/PKU06y

  I hope this helps. Just reply to other questions.

• % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  Hi all...

  I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  on my 1841 which is currently set to L2L via internet cable. Anyone seen this before? I can't find anything on Cisco related to this.
  The tunnel rises and I got the same configs using DSL except interfaces are different. Thank you...
  My configs are below:
  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  # address a.a.a.a isakmp encryption key

  ISAKMP crypto keepalive 20 periodicals

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac xform

  Crypto ipsec df - bit clear

  !

  10 VPN ipsec-isakmp crypto map

  the value of a.a.a.a peer

  Set transform-set xform

  PFS group2 Set

  match address CRYPTO_ACL

  !

  interface cable-Modem0/1/0

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP address 98.x.x.x 255.255.255.224

  IP virtual-reassembly

  VPN crypto card

  Hello DialerString,

  I fear that the ACL is not related to the question, so I expect not to see anything in the debug output

  Hope to help

  Giuseppe

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.

• PIX 525 R deactivation 1 port 4 FA-port adapter

  Hello

  I have a pix 525 (sw 7.0.1) with restricted permitted whitch limits the interface count to 6. I already have 4port FE installed adapter and I need to install the new gigabit to pix interface. Can I disable one of the interfaces in the 4 port adapter or can I haveto remove any card to add the gigabit interface?

  Currently I use 2 of the 4 interfaces into the 4 port adapter.

  --

  Mikko

  You can leave the card 4FE in there, the last port on this subject is unusable automatically.