2 sides print on 7400 with Mountain Lion

Similar Questions

• HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

  I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

  HP Photosmart all-in-One Printer series - B010

  MacBook Pro / 10.8.1 (Mountain Lion)

  Router

  Hi yadin7,

  The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

  You can find the specifications listed below:

  Input/output
  USB port: Rear hi-speed
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

  Kind regards

  Shlomi

• The latest version of Safari works with Mountain Lion

  The latest version of Safari works with Mountain Lion

  # The most recent which is version 6.2.8.

  (144408)

• I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  Yes, it is better to update the old Mac EC.

  Make sure that you back up the old Mac before the upgrade.

  Note the application of some may require updated to work with CBS. To check see it:

  https://roaringapps.com/apps

  Also, some devices may require updated drivers and for some devices such drivers do not exist.

• HP 990 cm print is no longer the color since the upgrade to the new iMac with Mountain Lion

  Have an older CV (990c, m series) which worked fine on my iMac Leopard PPC (X.5.8) running.

  Since the upgrade to the new Intel iMac running Mountain Lion (the most recent software upgrades / w X.8.2) this printer will print only in black and white, despite having new color and cartridges inkjet black installed - even the test pattern that prints automatically when I changed the print cartridges only in B & W.

  The detailed print dialog box that appears when I try to print a color page does not include the usual option to print in color.

  I think that HP is no longer provides this older printer drivers but guess they are in the software updates in Mac OS.

  Someone has an idea how I can fix it, or is it just time to recycle this printer and buy a new one?

  TIA

  Caroline

  Hello

  The most recent is available in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=61686

  Probably time to buy a new printer.

• Photosmart C4780 with Mountain Lion software problem

  How can I get the software of the printer to use with the Mountain Lion if the app store shows no update available? I tried to solve a problem after upgrading to Mac OS 10.8 and uninstalled my HP software. Now I can't scan and no HP software does appear in my applications folder!

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Scan using Capture of Image in your Applications folder.

• Virtual problem-solving with Mountain Lion

  I use Fusion 5.0.2 and when I open the virtual Mountain Lion the resolution is 1024 x 768 while the Thunderbolt display supports 2560 x 1440.  My Mac features are:

  Mac Mini server

  Mid-2011

  10.8.2 OSX

  2 GHz Intel Core i7

  8 GB HD DDR3 1333

  Intel HD Graphics 3000 512 MB

  Any ideas?

  Thanks for your help,

  dalcock wrote:

  No, I have not. I didn't know that I should...

  ... If anyone can give me a url where I can download what I need and where to install it, I would be delighted.  As I understand it, I would setup these tools in the machine virtual, right?  Once I realized that I have to install?

  With the virtual machine running, pull down the menu of the Virtual Machine and install VMware Tools, you'll see. Choose that and you should see the virtual machine window "click on install to connect the installation of VMware Tools CD to this virtual machine" and "In the virtual machine, open the application"Install VMware Tools"on"VMware Tools"disk." Installer is built into the merger application so there's nothing extra to get. Request for enforcement "install VMware Tools" and restart the virtual machine and you should get all the resolution choices you could want.

• Cannot install indesign with mountain lion

  I bought and installed mountain lion, so that I can download indesign. He continues to show me the error page that I don't have a current operating system installed? Help, please?

  Please tell us which version of Adobe InDesign are you trying to install, you can check: system requirements | InDesign

• Impossible to analyze in CS3 directly with Mountain Lion 10.8 Mac

  HP Officejet J4680.  Ser.CN9C5060HF

  Mac 10.8

  HP was last updated

  Recently changed from 10.4 Tiger directly to 10.8 M.Lion.  No probs to sweep in the past.  Receive the following error message:

  Could not complete the import command due to a problem with the acquisition module while scanning in CS3.

  Does this mean that my printer/driver/s are more compatible with 10.8?  I can scan in other areas/programs but not this one or in Office 2011, it seems.  It's like having a horn, but being not not able to use it.

  HP can help and advise me on please?

  Hello

  The drivers of your printer for ML provided by Apple via Apple Software Update.

  Bundled software includes only scan ICA-compatible interface (as well as almost any solution of HP software) provided for Lion or higher.

  As CS3 not supported Twain compatible devices, so you can't scan directly through the Adobe software...

  You can scan using any compatible software ICA as Image Capture, Preview, Print & Scan, etc.

  Then run the file scanned using CS3.

  Kind regards

  Shlomi

• Photosmart printer 7510 disappeared from Mountain Lion (Mac OS). Impossible to re - install.

  Hello, our printer is only 6 months old and has been excellent until a week ago from work. He suddenly disappeared from our list of available printers, and I get a message "no printers are available" when I try to add new. This is the case on desktop (iMac) as well as mobile devices.

  I checked the settings wireless to the printer, which are very good. I printed a test page successfully, and also all the results on the printed wireless network Test results show a 'pass '.

  I have re-installed the software and drivers, but can't go beyond the installation page, because the printer is not recognized.

  Any suggestions?

  Hello

  Try to unplug your router for 30 seconds, plug back and restart your Mac and the printer, and then try to add the printer in Print & Scan again.

  If the same persist, can you have any network changes lately? for example a new installation of a new router, router firmware, etc.?

• InDesign CS6 with Mountain Lion

  Hello

  I try to install the InDesign trail on a new Mac Book Pro retina under 10.8.2 and I get the following error in the Setup program

  Exit code: 7

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF015, DW063...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 5 (s), 0 warning (s)

  -Payload: {327492D4-78EB-11E1-8ABE-84C55623D190} Adobe InDesign CS6 Application Base Files 8.0.0.0 -.

  ERROR: DF015: cannot delete the symlink "/ Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/Frameworks/amtlib.framework/Resources"Seq (1051).

  ERROR: DW063: ARKDeleteSymlinkCommand of command failed. SEQ (1051)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Basic Application of the CS6 Adobe InDesign files: due to a lack of Language Pack installation

  ERROR: DW050:-Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: installation failed

  ERROR: DW050:-Files_AdobeInDesign8AppLang-en_US CS6 Application Adobe InDesign language: installation failed

  -------------------------------------------------------------------------------------

  I search for the websites and forums and I've had no luck, any help would be appreciated more

  see you soon

  LIV

  OK, run the cleanup tool once more...

  Delete InDesign CS6 /Applications/ folder

  Activate the Root (support.apple.com/kb/ht1528) user account, and then install the software.

• CS6 will be compatible with Mountain Lion?

  I think the next OSX release is just around the corner.

  We do not know to what extent the CS6 will be ready to work in this new environment?

  Best,

  AJ

  Here the answer to http://forums.adobe.com/message/4579177#4579177

• Impression of failure of communication with Mac Mountain Lion and Photosmart c7280

  I have flowed through many messages about the printing and problems of Mountain Lion (10.8.3) faults and cannot get the answer I need.  I use this printer (HP Photosmart c7280) very well with the Lion of mountain for several months now and just recently have had problems printing.  I can scan very well, but printing is another story.  I deleted the printer, re-installed, restarted, unplugged, replugged, reset the printing system, deleted and reinstalled the drivers, ad nauseam!  I don't know what the problem is.  I am connected with a USB cable.  I send a print job, it can get 30 to 67% of the way sent and start printing and then I get this error: failure to communicate: the computer is therefore more able to communicate with your printer. Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.
  Check the printer to find errors.

  I just tried to install the new driver and new hpprinterdrivers2.14 and they used to install.

  Today, I can't get more than one or two lines to print before it stops.  I don't know what else to try.  Help, please!

  Hello

  First make sure that the material can print without problems by printing a test page:

  http://support.HP.com/us-en/document/c01448018

  In addition, have you tried plugging the USB stick on another free port of your Mac?

  Be sure to use a USB 2.0 standard, not longer than 2 m long cable.

  Make sure it is directly connecting to your Mac and not through a USB extention or a hub port on an Apple keyboard, which is not powered.

  So I recommend you try a different USB cable, then check any change.

• Drag and drop support with the VM mountain lion

  Hi all

  I recently got a new macbook pro (with retina display and the 16 GB and of course the SSD - very soft). I created a machine virtual windows 7 for my windows applications and I also wanted a separate VM to develop on with Mountain Lion, so I downloaded the Cougar from the app store and created an image of mountain lion. My only problem is that it doesn't seem to be any support for drag and drop between my host mountain lion and my mountain lion guest VM. If I try to drag and drop with my windows 7 VM, it works well, but not mountain Lion mountain lion.

  Does anyone know if there are a few settings that I can turn it on or if it is supposed to work? Furthermore, I am under Fusion 5.0.3 and am on MacOS 10.8.3 (on my host and the guest operating system).

  Thank you

  -Jeff

  Hi Jeff,

  Yes it is a limitation having Mac OS X as a guest operating system. There are some other limitations as well as

  • SVGA only.  No chart 2D or 3D accelerated.
  • No unit.
  • No fullscreen multimon support.
  • No USB 3.0 support.

  You can make a feature request or via this link: http://www.vmware.com/contact/contactus.html?department=prod_request

  Thank you

• With the help of Macbook Pro (Mountain Lion): purchased Lightroom 5 Officeworks and, using cards, bought Lightroom 5 serial number to use to download the software successfully. When I click on download, it pours an installer? file for download folded

  I'm running a Mackbook Pro with Mountain Lion. Yesterday, I bought 5 Lightoom stand-alone license map of office work. I created an Adobe ID and followed the instructions and successfully used the code on the card to get my serial number for Lightroom. He then invites me to click on the download button to start downloading the software and a package install presumed is appeared in my downloads folder in the Dock. When I double-click it, I get the following error message: "Download the Package" cannot open the developer's identity cannot be confirmed. How can I get around this? I have to download another program to install the Web page cloud creative and, if so, it will prompt me to enter the serial number LR already achieved? Any help appreciated.

  When I double-click it, I get the following error message: "Download the Package" cannot open the developer's identity cannot be confirmed.

  It's Apple Gatekeeper.

  See How to open the applications of a developer not identified in OS X Lion mountain | IVous