2 tunnels vpn site-to-site location A to B
Hello
Current:
I have an ASA 5505 (8.2.x) deployed on a client site with a public ip address provided by the customer.
I have a tunnel from site to site between us (site A) and client (site B).
ASA (at the client) has been installed with 2 VLAN by default (one for outside, one for the Interior using the 2-7 ports).
Future:
The customer wants another tunnel from site to site for a separate project, but they want to use the same ASA but uses another port configured for a schema from a different ip address for this new project. (which means the same ip address public, but different vlan IP).
My Actions:
(A) my first reaction was that I could not do that, but since it's customer and I must find a way, if I can reconfigure client (site B) ASA to take a port and configure it to a vlan different (using the system of intellectual property for this project) and set up a second tunnel from site to site using this vlan?
(B) can even reconfigure a port for a third vlan on this SAA? (customer ASA 5505, 8.2.x, per seat 10 credits).
What is the best approach to accomplish this task?
Thank you...
It's a strange question - technically, you could - I think that the place where you will fall short is that it uses the same peer address at its end. I don't think that it will eventually operate favorably... never tried.
I don't really understand the need for "another site to site tunnel" however. Theoretically, I could be wrong here, there is only need a tunnel of the phase 1 of IKE. There may be several IKE tunnels phase 2, communicating through the tunnel at the same time, however.
Why not let the equal relationship as it is, expand your (and his) internal/external cryptos and go from there. 8.4 ASA supports twice nat - which could be a solution if he has questions on its end.
And to be honest, even the ASA 5505 that I helped set up were all on the remote site, and I'm sure that each of them exists only for the purposes of a single site to my organization.
Perhaps explain WHY he wants to do what he wants to do it too?
Tags: Cisco Security
Similar Questions
-
Tunnel VPN site to Site with 2 routers Cisco 1921
Hi all
So OK, I'm stumped. I create much s2s vpn tunnels before, but this one I just can't go there. It's just a tunnel VPN Site to Site simple using pre-shared keys. I would appreciate it if someone could take a look at our configs for both routers running and provide a comment. This is the configuration for both routers running. Thank you!
Router 1
=======
Current configuration: 4009 bytes
!
! Last configuration change at 19:01:31 UTC Wednesday, February 22, 2012 by asiuser
!
version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
SJWHS-RTRSJ host name
!
boot-start-marker
boot-end-marker
!
!
No aaa new-model
!
!
!
!
No ipv6 cef
IP source-route
IP cef
!
!
DHCP excluded-address 192.168.200.1 IP 192.168.200.110
DHCP excluded-address IP 192.168.200.200 192.168.200.255
!
IP dhcp POOL SJWHS pool
network 192.168.200.0 255.255.255.0
default router 192.168.200.1
10.10.2.1 DNS server 10.10.2.2
!
!
no ip domain search
IP-name 10.10.2.1 Server
IP-name 10.10.2.2 Server
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki trustpoint TP-self-signed-236038042
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 236038042
revocation checking no
rsakeypair TP-self-signed-236038042
!
!
TP-self-signed-236038042 crypto pki certificate chain
certificate self-signed 01
30820241 308201AA A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
8B1E638A EC
quit smoking
license udi pid xxxxxxxxxx sn CISCO1921/K9
!
!
!
redundancy
!
!
!
!
crypto ISAKMP policy 10
md5 hash
preshared authentication
ISAKMP crypto key presharedkey address 112.221.44.18
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1
!
map CryptoMap1 10 ipsec-isakmp crypto
defined by peer 112.221.44.18
game of transformation-IPSecTransformSet1
match address 100
!
!
!
!
!
interface GigabitEthernet0/0
192.168.200.1 IP address 255.255.255.0
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/1
Description wireless bridge
IP 172.17.1.2 255.255.255.0
automatic duplex
automatic speed
!
!
interface FastEthernet0/0/0
Verizon DSL description for failover of VPN
IP 171.108.63.159 255.255.255.0
automatic duplex
automatic speed
card crypto CryptoMap1
!
!
!
Router eigrp 88
network 172.17.1.0 0.0.0.255
network 192.168.200.0
redistribute static
passive-interface GigabitEthernet0/0
passive-interface FastEthernet0/0/0
!
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP route 0.0.0.0 0.0.0.0 172.17.1.1
IP route 112.221.44.18 255.255.255.255 171.108.63.1
!
access-list 100 permit ip 192.168.200.0 0.0.0.255 10.10.0.0 0.0.255.255
!
!
!
!
!
!
control plan
!
!
!
Line con 0
Synchronous recording
local connection
line to 0
line vty 0 4
exec-timeout 30 0
Synchronous recording
local connection
transport input telnet ssh
!
Scheduler allocate 20000 1000
end
=======
Router 2
=======
Current configuration: 3719 bytes
!
! Last configuration change at 18:52:54 UTC Wednesday, February 22, 2012 by asiuser
!
version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
SJWHS-RTRHQ host name
!
boot-start-marker
boot-end-marker
!
logging buffered 1000000
!
No aaa new-model
!
!
!
!
No ipv6 cef
IP source-route
IP cef
!
!
!
!
no ip domain search
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki trustpoint TP-self-signed-3490164941
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 3490164941
revocation checking no
rsakeypair TP-self-signed-3490164941
!
!
TP-self-signed-3490164941 crypto pki certificate chain
certificate self-signed 01
30820243 308201AC A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
EA1455E2 F061AA
quit smoking
license udi pid xxxxxxxxxx sn CISCO1921/K9
!
!
!
redundancy
!
!
!
!
crypto ISAKMP policy 10
md5 hash
preshared authentication
ISAKMP crypto key presharedkey address 171.108.63.159
!
86400 seconds, duration of life crypto ipsec security association
!
Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1
!
map CryptoMap1 10 ipsec-isakmp crypto
defined by peer 171.108.63.159
game of transformation-IPSecTransformSet1
match address 100
!
!
!
!
!
interface GigabitEthernet0/0
no ip address
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
IP 10.10.1.6 255.255.0.0
!
interface GigabitEthernet0/1
IP 172.17.1.1 255.255.255.0
automatic duplex
automatic speed
!
!
interface FastEthernet0/0/0
IP 112.221.44.18 255.255.255.248
automatic duplex
automatic speed
card crypto CryptoMap1
!
!
!
Router eigrp 88
Network 10.10.0.0 0.0.255.255
network 172.17.1.0 0.0.0.255
redistribute static
passive-interface GigabitEthernet0/0
passive-interface GigabitEthernet0/0.1
!
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP route 0.0.0.0 0.0.0.0 112.221.44.17
!
access-list 100 permit ip 10.10.0.0 0.0.255.255 192.168.200.0 0.0.0.255
!
!
!
!
!
!
control plan
!
!
!
Line con 0
Synchronous recording
local connection
line to 0
line vty 0 4
exec-timeout 30 0
Synchronous recording
local connection
transport input telnet ssh
!
Scheduler allocate 20000 1000
end
When the GRE tunnel carries your traffic to private ip range, your ACL must contain address of the host of point to point the IPSec tunnel.
Since then, both routers are running EIGRP in the corporate network, let the EIGRP Exchange routes via GRE tunnel, which is a good practice, rather than push the ip ranges private individual through the IPSec tunnel.
Let me know, if that's what you want.
Thank you
-
How to restrict the tunnel VPN Site to site traffic thrue
Hello
I have a tunnel from site to site, where Site 1 is the local site and main site. and 2 the site is the remote site.
How to limit the traffic of site 2, so that they can only reach a few IPS on the lokal site.
But since the lokal site all IP addresses must be able to reach all of the IP addresses to site 2 (remotely).
an access list to the 'inside' interface does not work, since all the acl is bypassed for the interfaces for IPSEC traffic.
Then, I tried to make a political group where I only allow traffic to servers specifik, but site 2 can still reach everything on the lokal site.
Am I missing here?
Best regards
Erik
Hi Erik,
Unfortunately, the only options that we have are VPN filters that are two-way and disabling the sysopt feature.
If you have a core switch/router we can block traffic on this device by using the access list or null routes.
See you soon,.
Nash.
-
Split tunneling VPN site-to-site
Dear all,
I have two ASA 5510 with VPN site-to-site, I can send all Internet traffic to the central site (HQ),
How to set the split tunneling to access Campus LAN (192.168.2.0/24) of LAN2.
Thank you in advance.
Best regards
Zoltan
You can have 'decline' instruction on your ACL crypto and he will deviate the traffic is encrypted to the site-to-site VPN tunnel.
For ASA 1:
access-list extended 100 permit ip 10.10.16.192 255.255.255.192 10.10.16.128 255.255.255.192
access-list extended 100 permit ip 10.0.0.0 255.0.0.0 10.10.16.128 255.255.255.192
access-list extended 100 deny ip 192.168.2.0 255.255.255.0 10.10.16.128 255.255.255.192
access-list extended 100 permit ip any 10.10.16.128 255.255.255.192
For ASA 2:
access-list extended 100 permit ip 10.10.16.128 255.255.255.192 10.10.16.192 255.255.255.192
access-list extended 100 permit ip 10.10.16.128 255.255.255.192 10.0.0.0 255.0.0.0
access-list extended 100 deny ip 10.10.16.128 255.255.255.192 192.168.2.0 255.255.255.0
access-list extended 100 permit ip 10.10.16.128 255.255.255.192 all
Hope that helps.
-
Tunnel VPN site to Site - aggressive Mode
I searched the community for answers to this and that you have not found quite what I was looking for (or what seems logical). I have an ASA 5510 to A site with one website VPN tunnel to a SonicWall to site B. Which works very well. I need to create a tunnel for site C to site a using a tunnel of aggressive mode. I'm not quite sure how to do this. Any suggestion would be great!
NOTE: I have included the parts of the running configuration that seem relevant to me. If I missed something please let me know.
ASA Version 8.2 (1)
interface Ethernet0/0
nameif outside
security-level 0
IP 1.2.3.4 255.255.255.248
!
10.5.2.0 IP Access-list extended site_B 255.255.255.0 allow 10.205.2.0 255.255.255.128
access extensive list ip 10.5.2.0 site_C allow 255.255.255.0 10.205.2.128 255.255.255.128
dynamic-access-policy-registration DfltAccessPolicy
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac 3des-sha1
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto VPN 30 card matches the address site_B
card crypto VPN 30 peer set 4.3.2.1
crypto VPN 30 the transform-set 3des-sha1 value card
card crypto VPN 40 corresponds to the address site_C
card crypto VPN. 40 set peer 8.7.6.5
crypto VPN. 40 the transform-set 3des-sha1 value card
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
crypto ISAKMP ipsec-over-tcp port 10000
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
tunnel-group 4.3.2.1 type ipsec-l2l
4.3.2.1 tunnel-group ipsec-attributes
pre-shared-key *.
tunnel-group 8.7.6.5 type ipsec-l2l
IPSec-attributes tunnel-group 8.7.6.5
pre-shared-key *.
David,
Please try this:
clear crypto ipsec its peer site_c_IP
clear configure VPN 40 crypto card
card crypto VPN 10 corresponds to the address site_C
card crypto VPN 10 set peer 8.7.6.5
crypto VPN 10 the transform-set 3des-sha1 value card
debug logging in buffered memory
capture drop all circular asp type
capture capin interface inside the match ip 10.5.2.0 255.255.255.0 10.205.2.128 255.255.255.128
After generating the traffic and INTERNAL of the machine behind the ASA:
view Journal | 10.205.2 Inc.
See the fall of cap. 10.205.2 Inc.
view Cape capin
In case it does not work:
(a) show the crypto classic table ASP.
(b) details of vpn-framework for table ASP.
(c) show cry its site_c peer ipsec
(d) entry packet - trace within the icmp 10.5.2.15 8 0 10.205.2.130 detail
(e) see the crypto ipsec his
At the same time, please.
Let me know how it goes.
Thank you
Portu.
Please note all useful posts
-
Default route inside the tunnel VPN Site to site
We want to carry the default traffic within the site to site VPN tunnel, our goal is to route all traffic including default branch road and HO HO help branch for surfing the internet.
I have due to difficulties
1. cannot configure dynamic NAT for the router in the branch on the ASA HO, I know configuration for 8.2, but know not about 8.4
This is the configuration for the 8.2, if someone can translate to 8.4, which would be a great help
NAT (outside) 1 192.168.230.0
2. I do not know how to write the default route on the branch office router to send all traffic within the VPN tunnel
Hello
As I understand it then you want to route ALL traffic from the Remote Site to the Central Site and manage Internet traffic there.
I suppose you could define "interesting traffic" in configuring VPN L2L ACL / access-list in the following way
Branch router
extended IP access list
allow an ip
ASA central
ip access list allow one
The idea behind the type of ACL for the VPN L2L above configurations is that, for example, the branch office router has a rule that sets connection coming from the local LAN for 'any' destination address must be sent to the VPN L2L connection. So, it would be in such a way that all the traffic will be sent to the Central Site via VPN L2L.
I must say however, that the VPN router configurations side are not more familiar to me because I manage especially with ASA Firewall (and to some extent still PIX and FWSMs)
I guess that on the ASA Central you will PAT translation to "outside" so that the host can access the Internet?
You would probably do something like this
object-group network to REMOTE-SITE-PAT-SOURCE
network-object
interface of REMOTE-SITE-PAT-SOURCE dynamic NAT (outside, outside) after auto source
If you don't want to use the 'outside' IP address, then you will have to create a 'network of object' for address IP of PAT and use it in the line of NAT configuration above instead of "interface".
Alternate configuration might be
network of the REMOTE-SITE-PAT object
subnet
dynamic NAT interface (outdoors, outdoor)
You also need to enable
permit same-security-traffic intra-interface
To allow traffic to enter and exit the same interface on the ASA
All these answers are naturally suggestion on what you have to do. I don't know what kind of configurations you have right now.
Hope this helps in some way
-Jouni
Post edited by: Jouni Forss
-
I'm having a terrible time linking two Site to Site VPN PIX. I don't spin all VPN Clients, nor will I in the future. When I start debugging on the VPN connection, it gives me this result:
Peer VPN: ISAKMP: approved new addition: ip:xxx.xxx.xxx.3 Total VPN peer: 1
Peer VPN: ISAKMP: ip:xxx.xxx.xxx.3 Ref cnt is incremented to peers: 1 Total peer VPN: 1
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block: CBC xxx.xxx.xxx.3, dest xxx.xxx.xxx.246
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 10
ISAKMP: DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0 x 0 0 x 1 0 x 51 0x80
ISAKMP (0): atts are not acceptable. Next payload is 0
ISAKMP (0): audit ISAKMP transform 1 against 20 priority policy
ISAKMP: DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: lifespan (IPV) 0 x 0 0 x 1 0 x 51 0x80
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block: CBC xxx.xxx.xxx.3, dest xxx.xxx.xxx.246
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0
ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): provider v6 code received xauth
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): Peer Remote supports dead peer detection
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing another box of IOS!
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 500
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
ISAKMP (0): retransmission of phase 1... IPSEC (key_engine): request timer shot: count = 1,.
local (identity) = xxx.xxx.xxx.246, distance = xxx.xxx.xxx.3,
local_proxy = 192.168.0.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 10.1.1.0/255.255.255.0/0/0 (type = 4)
ISAKMP (0): retransmission of phase 1...
ISAKMP (0): delete SA: src xxx.xxx.xxx.246 dst xxx.xxx.xxx.3
ISADB: Reaper checking HIS 0x814265e8, id_conn = 0 DELETE IT!
If I run an isakmp crypto see the his
Total: 1
Embryonic: 1
Src DST in the meantime created State
xxx.xxx.xxx.3 xxx.xxx.xxx.246 MM_KEY_EXCH 0 0
He won't let the State (other than to take down the tunnel) MM_KEY_EXCH. I'm positive 99% that correspond to public keys. Is there something else that could cause it to give the MM_KEY_EXCH message and do not create the tunnel? Public keys are case-sensitive? What is the message of "talking with another box of IOS"? Here is a copy of the configuration:
name 192.168.0.0 vpn
permit access ip 10.0.0.0 list inside_outbound_nat0_acl 255.0.0.0 255.255.0.0 vpn
permit access ip 10.0.0.0 list outside_cryptomap_20 255.0.0.0 255.255.0.0 vpn
NAT (inside) 0-list of access inside_outbound_nat0_acl
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set xxx.xxx.xxx.246
outside_map card crypto 20 the transform-set ESP-DES-MD5 value
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * address xxx.xxx.xxx.246 netmask 255.255.255.255 No.-xauth-no-config-mode
part of pre authentication ISAKMP policy 20
encryption of ISAKMP policy 20
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Any help would be greatly appreciated.
Daryl,
You can post a new ISAKMP debug output. You can test the remote peer? Don't you see the on the ACL crypto access numbers? You will see the 'talk to another box of IOS' on output debugging because the two boxes are running IOS - this isn't a mistake!
Let me know-
Jay
-
Tunnel VPN site to Site with DDNS
I have a hub site that has a static ip address and a remote site with DDNS. I am building a Site to Site tunnel between them, I can do this with the static ip address, but when he changes the tunnel breaks down, so I need a way to the ASA to know when this ip address changes. How can I do this?
Thank you
To my knowledge, DDNS for VPN is supported only on router IOS not on ASA.
If you use ASA on the head of network, you may need to use EasyVPN
EasyVPN VPN must be started from the remote site.
-
Static - VPN Site to Site DMVPN Tunnel
Hello
I have two sites, Site-a with Cisco ASA 5505 static IP Configuration & Site-B 1841 Cisco ISR with dynamic IP Configuration.
See the diagram attached for a glimpse.
The goal is to have the tunnel VPN Site to Site between the site of two so that desktop sitting in Site B can access the server applications residing in the Site-A.
Please suggest
Concerning
@Mohammed
Hello
A site to Site IPSec, the ASA is the static side and he should have the 'dynamic' configuration, and the side Dynamics SRI 1841 should have the static side:
I'll give an example configuration to achieve, but you can use a different encryption algorithms:
ASA 5505:
Phase 1:
crypto ISAKMP policy 1
3des encryption
md5 hash
preshared authentication
Group 2
IPSec-attributes tunnel-group DefaultL2LGrouppre-shared-key cisco123 -
Tunnel from site to site VPN that overlap within the network
Hi all
I need to connect 2 networks via a tunnel VPN site to site. On the one hand, there is a 506th PIX by the termination of the VPN. The other side, I'm not too sure yet.
However, what I know, is that both sides of the tunnel using the exact same IP subnet 192.168.1.0/24.
This creates a problem when I need to define the Routing and the others when it comes to VPN and what traffic should be secure etc.
However, read a lot for the review of CERT. Adv. Cisco PIX and noticed that outside NAT can solve my 'small' problem.
That's all it is said, but I'd really like to see an example of configuration of this or hear from someone who has implemented it.
Anyone?
Steffen
How is it then?
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800949f1.shtml
-
Tunnel VPN from Site to Site dynamic
I spent the last 2 days, try to set up a dynamic tunnel VPN site to site of a Cisco 5510 to a Cisco SA540. The 540 is a dynamic supplier that can not be changed. There a dyndns account.
I was lucky that the other 10 sites are all static and the ADSM Assistant creates these tunnels without problems.
What I try to do is:
Is it possible to do it VIA ADSM?
If this isn't the case, someone please in detail can help with orders.
Kind regards
PP
Hello Paul,
This is possible thanks to the ASDM, but you do have to use some advanced settings:
Configuration > VPN Site to Site > advanced > Tunnel groups
It change the group called "DefaultL2LGroup" and add the brightness button before the SA540 (Note: all of your sites with dynamic IP addresses will have the same key communicated in advance, if you have IPSec VPN clients, it will be a good idea to use a different key).
Click ok and then apply.
Then go to Configuration > VPN Site to Site > advanced > Crypto Maps and add a new entry dynamic
Make sure that you match the phase 2 are on your SA540 (pictured ESP-AES-128-SHA), select a dynamic strategy and make the last sequence number (65535) then ok, apply.
Then go to Configuration > VPN Site to Site > advanced > IKE policies and make sure you have corresponding policies of the phase 1.
If no corresponding policy is found, add them.
Through CLI:
IKEv1 crypto policy 1
preshared authentication
aes encryption
sha hash
Group 2
Crypto-map dynamic outside_dyn_map 65535 set transform-set ESP-AES-128-SHA ikev1
CARD crypto ipsec-isakmp 65535 dynamic outside_dyn_map
IPSec-attributes tunnel-group DefaultL2LGroup
IKEv1 pre-shared-key *.
I hope this helps.
-
Cisco ASA 5505 VPN Site to Site
Hi all
First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..
I'd appreciate any help that can be directed to this problem please. Slowly losing my mind
Please see details below:
Two ADMS are 7.1
IOS
ASA 1
Nadia
:
ASA Version 9.0 (1)
!
hostname PAYBACK
activate the encrypted password of HSMurh79NVmatjY0
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
2KFQnbNIdI.2KYOU encrypted passwd
names of
local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
link Trunk Description of SW1
switchport trunk allowed vlan 1,10,20,30,40
switchport trunk vlan 1 native
switchport mode trunk
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
No nameif
no level of security
no ip address
!
interface Vlan2
nameif outside
security-level 0
IP 92.51.193.158 255.255.255.252
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Vlan20
nameif servers
security-level 100
address 192.168.20.1 255.255.255.0
!
Vlan30 interface
nameif printers
security-level 100
192.168.30.1 IP address 255.255.255.0
!
interface Vlan40
nameif wireless
security-level 100
192.168.40.1 IP address 255.255.255.0
!
connection line banner welcome to the Payback loyalty systems
boot system Disk0: / asa901 - k8.bin
passive FTP mode
summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS lookup field inside
domain-lookup DNS servers
DNS lookup domain printers
DNS domain-lookup wireless
DNS server-group DefaultDNS
Server name 83.147.160.2
Server name 83.147.160.130
permit same-security-traffic inter-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
ftp_server network object
network of the Internal_Report_Server object
Home 192.168.20.21
Description address internal automated report server
network of the Report_Server object
Home 89.234.126.9
Description of server automated reports
service object RDP
service destination tcp 3389 eq
Description RDP to the server
network of the Host_QA_Server object
Home 89.234.126.10
Description QA host external address
network of the Internal_Host_QA object
Home 192.168.20.22
host of computer virtual Description for QA
network of the Internal_QA_Web_Server object
Home 192.168.20.23
Description Web Server in the QA environment
network of the Web_Server_QA_VM object
Home 89.234.126.11
Server Web Description in the QA environment
service object SQL_Server
destination eq 1433 tcp service
network of the Demo_Server object
Home 89.234.126.12
Description server set up for the product demo
network of the Internal_Demo_Server object
Home 192.168.20.24
Internal description of the demo server IP address
network of the NETWORK_OBJ_192.168.20.0_24 object
subnet 192.168.20.0 255.255.255.0
network of the NETWORK_OBJ_192.168.50.0_26 object
255.255.255.192 subnet 192.168.50.0
network of the NETWORK_OBJ_192.168.0.0_16 object
Subnet 192.168.0.0 255.255.0.0
service object MSSQL
destination eq 1434 tcp service
MSSQL port description
VPN network object
192.168.50.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.50.0_24 object
192.168.50.0 subnet 255.255.255.0
service object TS
tcp destination eq 4400 service
service of the TS_Return object
tcp source eq 4400 service
network of the External_QA_3 object
Home 89.234.126.13
network of the Internal_QA_3 object
Home 192.168.20.25
network of the Dev_WebServer object
Home 192.168.20.27
network of the External_Dev_Web object
Home 89.234.126.14
network of the CIX_Subnet object
255.255.255.0 subnet 192.168.100.0
network of the NETWORK_OBJ_192.168.10.0_24 object
192.168.10.0 subnet 255.255.255.0
network of the NETWORK_OBJ_84.39.233.50 object
Home 84.39.233.50
network of the NETWORK_OBJ_92.51.193.158 object
Home 92.51.193.158
network of the NETWORK_OBJ_192.168.100.0_24 object
255.255.255.0 subnet 192.168.100.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
the tcp destination eq ftp service object
the purpose of the tcp destination eq netbios-ssn service
the purpose of the tcp destination eq smtp service
service-object TS
the Payback_Internal object-group network
object-network 192.168.10.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
object-group service DM_INLINE_SERVICE_3
the purpose of the service tcp destination eq www
the purpose of the tcp destination eq https service
service-object TS
service-object, object TS_Return
object-group service DM_INLINE_SERVICE_4
service-object RDP
the purpose of the service tcp destination eq www
the purpose of the tcp destination eq https service
object-group service DM_INLINE_SERVICE_5
purpose purpose of the MSSQL service
service-object RDP
service-object TS
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service DM_INLINE_SERVICE_6
service-object TS
service-object, object TS_Return
the purpose of the service tcp destination eq www
the purpose of the tcp destination eq https service
Note to outside_access_in to access list that this rule allows Internet the interal server.
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-list of FTP access
Comment from outside_access_in-RDP access list
Comment from outside_access_in-list of SMTP access
Note to outside_access_in to access list Net Bios
Comment from outside_access_in-SQL access list
Comment from outside_access_in-list to access TS - 4400
outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server
access host access-list outside_access_in note rule internal QA
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-HTTP access list
Comment from outside_access_in-RDP access list
outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www
Notice on the outside_access_in of the access-list access to the internal Web server:
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-HTTP access list
Comment from outside_access_in-RDP access list
outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server
Note to outside_access_in to access list rule allowing access to the demo server
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-RDP access list
Comment from outside_access_in-list to access MSSQL
outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3
Note to outside_access_in access to the development Web server access list
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer
AnyConnect_Client_Local_Print deny any4 any4 ip extended access list
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137
AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns
Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0
permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0
pager lines 24
Enable logging
information recording console
asdm of logging of information
address record
the journaling recipient
level alerts
Outside 1500 MTU
Within 1500 MTU
MTU 1500 servers
MTU 1500 printers
MTU 1500 wireless
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-711 - 52.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) source Dynamics one interface
NAT (wireless, outdoors) source Dynamics one interface
NAT (servers, outside) no matter what source dynamic interface
NAT (servers, external) static source Internal_Report_Server Report_Server
NAT (servers, external) static source Internal_Host_QA Host_QA_Server
NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM
NAT (servers, external) static source Internal_Demo_Server Demo_Server
NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination
NAT (servers, external) static source Internal_QA_3 External_QA_3
NAT (servers, external) static source Dev_WebServer External_Dev_Web
NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.10.0 255.255.255.0 inside
http 192.168.40.0 255.255.255.0 wireless
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 84.39.233.50
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.40.0 255.255.255.0 wireless
SSH timeout 5
Console timeout 0dhcpd 192.168.0.1 dns
dhcpd outside auto_config
!
dhcpd address 192.168.10.21 - 192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
paybackloyalty.com dhcpd option 15 inside ascii interface
dhcpd allow inside
!
dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
dhcpd update dns of the wireless interface
dhcpd option 15 ascii paybackloyalty.com wireless interface
dhcpd activate wireless
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal Payback_VPN group strategy
attributes of Group Policy Payback_VPN
VPN - 10 concurrent connections
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
attributes of Group Policy DfltGrpPolicy
value of 83.147.160.2 DNS server 83.147.160.130
VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
internal GroupPolicy_84.39.233.50 group strategy
attributes of Group Policy GroupPolicy_84.39.233.50
VPN-tunnel-Protocol ikev1, ikev2
Noelle XB/IpvYaATP.2QYm username encrypted password
Noelle username attributes
VPN-group-policy Payback_VPN
type of remote access service
username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
Éanna attributes username
VPN-group-policy Payback_VPN
type of remote access service
Michael qpbleUqUEchRrgQX of encrypted password username
user name Michael attributes
VPN-group-policy Payback_VPN
type of remote access service
username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
user name Danny attributes
VPN-group-policy Payback_VPN
type of remote access service
Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
user name Aileen attributes
VPN-group-policy Payback_VPN
type of remote access service
Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
Aidan username attributes
VPN-group-policy Payback_VPN
type of remote access service
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
shane.c iqGMoWOnfO6YKXbw encrypted password username
username shane.c attributes
VPN-group-policy Payback_VPN
type of remote access service
Shane uYePLcrFadO9pBZx of encrypted password username
user name Shane attributes
VPN-group-policy Payback_VPN
type of remote access service
username, encrypted James TdYPv1pvld/hPM0d password
user name James attributes
VPN-group-policy Payback_VPN
type of remote access service
Mark yruxpddqfyNb.qFn of encrypted password username
user name brand attributes
type of service admin
username password of Mary XND5FTEiyu1L1zFD encrypted
user name Mary attributes
VPN-group-policy Payback_VPN
type of remote access service
Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
Massimo username attributes
VPN-group-policy Payback_VPN
type of remote access service
type tunnel-group Payback_VPN remote access
attributes global-tunnel-group Payback_VPN
VPN1 address pool
Group Policy - by default-Payback_VPN
IPSec-attributes tunnel-group Payback_VPN
IKEv1 pre-shared-key *.
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 General-attributes
Group - default policy - GroupPolicy_84.39.233.50
IPSec-attributes tunnel-group 84.39.233.50
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the pptp
inspect the rsh
inspect the rtsp
inspect the sip
inspect the snmp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect xdmcp
inspect the icmp error
inspect the icmp
!
service-policy-international policy global
192.168.20.21 SMTP server
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1ASA 2
ASA Version 9.0 (1)
!
Payback-CIX hostname
activate the encrypted password of HSMurh79NVmatjY0
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
Description this port connects to the local network VIRTUAL 100
switchport access vlan 100
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 100
!
interface Ethernet0/4
switchport access vlan 100
!
interface Ethernet0/5
switchport access vlan 100
!
interface Ethernet0/6
switchport access vlan 100
!
interface Ethernet0/7
switchport access vlan 100
!
interface Vlan2
nameif outside
security-level 0
IP 84.39.233.50 255.255.255.240
!
interface Vlan100
nameif inside
security-level 100
IP 192.168.100.1 address 255.255.255.0
!
banner welcome to Payback loyalty - CIX connection line
passive FTP mode
summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS lookup field inside
DNS server-group defaultDNS
Name-Server 8.8.8.8
Server name 8.8.4.4
permit same-security-traffic inter-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the host-CIX-1 object
host 192.168.100.2
Description This is the VM server host machine
network object host-External_CIX-1
Home 84.39.233.51
Description This is the external IP address of the server the server VM host
service object RDP
source between 1-65535 destination eq 3389 tcp service
network of the Payback_Office object
Home 92.51.193.158
service object MSQL
destination eq 1433 tcp service
network of the Development_OLTP object
Home 192.168.100.10
Description for Eiresoft VM
network of the External_Development_OLTP object
Home 84.39.233.52
Description This is the external IP address for the virtual machine for Eiresoft
network of the Eiresoft object
Home 146.66.160.70
Contractor s/n description
network of the External_TMC_Web object
Home 84.39.233.53
Description Public address to the TMC Web server
network of the TMC_Webserver object
Home 192.168.100.19
Internal description address TMC Webserver
network of the External_TMC_OLTP object
Home 84.39.233.54
External targets OLTP IP description
network of the TMC_OLTP object
Home 192.168.100.18
description of the interal target IP address
network of the External_OLTP_Failover object
Home 84.39.233.55
IP failover of the OLTP Public description
network of the OLTP_Failover object
Home 192.168.100.60
Server failover OLTP description
network of the servers object
subnet 192.168.20.0 255.255.255.0
being Wired network
192.168.10.0 subnet 255.255.255.0
the subject wireless network
192.168.40.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.100.0_24 object
255.255.255.0 subnet 192.168.100.0
network of the NETWORK_OBJ_192.168.10.0_24 object
192.168.10.0 subnet 255.255.255.0
network of the Eiresoft_2nd object
Home 137.117.217.29
Description 2nd Eiresoft IP
network of the Dev_Test_Webserver object
Home 192.168.100.12
Description address internal to the Test Server Web Dev
network of the External_Dev_Test_Webserver object
Home 84.39.233.56
Description This is the PB Dev Test Webserver
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_2
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_3
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_4
service-object MSQL
service-object RDP
the tcp destination eq ftp service object
object-group service DM_INLINE_SERVICE_5
service-object MSQL
service-object RDP
the tcp destination eq ftp service object
object-group service DM_INLINE_SERVICE_6
service-object MSQL
service-object RDP
the Payback_Intrernal object-group network
object-network servers
Wired network-object
wireless network object
object-group service DM_INLINE_SERVICE_7
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_8
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_9
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_10
service-object MSQL
service-object RDP
the tcp destination eq ftp service object
object-group service DM_INLINE_SERVICE_11
service-object RDP
the tcp destination eq ftp service object
outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1
Note to access list OLTP Development Office of recovery outside_access_in
outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group
Comment from outside_access_in-access Eiresoft access list
outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group
Note to outside_access_in access to OLTP for target recovery Office Access list
outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group
Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server
outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group
Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft
outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group
Note to outside_access_in access from the 2nd IP Eiresoft access list
outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group
outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) source Dynamics one interface
NAT (inside, outside) static source CIX-host-1 External_CIX-host-1
NAT (inside, outside) static source Development_OLTP External_Development_OLTP
NAT (inside, outside) static source TMC_Webserver External_TMC_Web
NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP
NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover
NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver
NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination
NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 92.51.193.156 255.255.255.252 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 92.51.193.158
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 92.51.193.156 255.255.255.252 outside
SSH timeout 5
Console timeout 0dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal GroupPolicy_92.51.193.158 group strategy
attributes of Group Policy GroupPolicy_92.51.193.158
VPN-tunnel-Protocol ikev1, ikev2
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 General-attributes
Group - default policy - GroupPolicy_92.51.193.158
IPSec-attributes tunnel-group 92.51.193.158
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
: endHello
There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.
All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.
Here are a few suggestions on what to change
ASA1
Minimal changes
the object of the LAN network
192.168.10.0 subnet 255.255.255.0
being REMOTE-LAN network
255.255.255.0 subnet 192.168.100.0
NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination
That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.
Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.
Other suggestions
These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.
PAT-SOURCE network object-group
source networks internal PAT Description
object-network 192.168.10.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source
No source (indoor, outdoor) nat Dynamics one interface
no nat (wireless, outdoors) source Dynamics one interface
no nat (servers, outside) no matter what source dynamic interface
The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.
Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.
network of the SERVERS object
subnet 192.168.20.0 255.255.255.0
network of the VPN-POOL object
192.168.50.0 subnet 255.255.255.0
NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL
no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination
The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.
ASA2
Minimal changes
the object of the LAN network
255.255.255.0 subnet 192.168.100.0
being REMOTE-LAN network
192.168.10.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination
That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.
Finally, we remove the old rule that generated the ASDM.
Other suggestions
PAT-SOURCE network object-group
object-network 192.168.100.0 255.255.255.0
NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source
No source (indoor, outdoor) nat Dynamics one interface
The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.
I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.
Hope this makes any sense and has helped
Remember to mark a reply as the answer if it answered your question.
Feel free to ask more if necessary
-Jouni
-
VPN site to Site using the router and ASA
Hello
I have a Cisco 1812 router that is configured for remote access VPN using IPSec (Cisco VPN Client), my question is if I can configure a Cisco ASA 5505 to connect to the router as a VPN from site to site.
Thank you
Karl
Dear Karl,
Yor are right, in this case you can create a tunnel vpn site-to-site between devices or you can configure your ASA as hardware VPN client. That is to say; Easy VPN.
For the same thing, you can consult the document below.
Kind regards
Shijo.
-
Cisco ASA VPN Site to Site WITH NAT inside
Hello!
I have 2 ASA 5505 related to IPSEC Tunnel VPN Site to Site.
A 192.168.1.0/24 'remotely' inside the network and a local "192.168.200.0/24' inside the network (you can see the diagram)
The local host have 192.168.200.254 as default gateway.
I can't add static route to all army and I can't add static route to 192.168.200.254.
NAT the VPN entering as 192.168.200.1 or a 192.168.200.x free to connect my host correcly?
If my host sends packet to exit to the default gateway.
Thank you for your support
Best regards
Marco
The configuration must be applied on the SAA with the 192.168.200.0 subnet it is inside, there must be something like this:
permit 192.168.1.0 ip access list VPN_NAT 255.255.255.0 192.168.200.0 255.255.255.0
NAT (outside) X VPN_NAT outside access list
Global (inside) X Y.Y.Y.Y (where the Y.Y.Y.Y) is the ip address
If you have other traffic on the vpn through the tunnel that requires no nat, then you must add external nat exemption rules since these lines above obliges all traffic through the asa to have a nat statement.
See if it works for you, else post your config nat here.
-
Several VPN site to site on the same ASA
I need to set up an IPSEC tunnel to allow a provider to the remote site printing to a printer on my network. I intend to use an ASA 5520 to do this. The architecture is fairly simple:
[Remote]-[Remote FW] -
-[FW Local]-[Local routing]-[printer] The downside is that there is finally more than a seller who needs to do. Each will have a different destination but mena there will be more than a VPN to ASA at my end. It seems that the ASA 5520 can be supported more than a VPN site to site, but I need to assign an IP address for different endpoint in each tunnel?
I searched and found no a design guide for the VPN site - to-many. If so, I'd appreciate a pointer.
--
Stephen
You can do several tunnels VPN site to site. As a general rule, you would have a card encryption applied to the interface in the face of internet. Each crypto map entry has a sequence number. You simply have to create all the necessary configurations (tunnel-group for the remote peer IP, ACL to set interesting traffic, etc.) and increment the entry card crypto.
Example: crypto map outside_map 1 match address s2s-VPN-1 crypto map outside_map 1 set pfs crypto map outside_map 1 set peer 1.2.3.4 crypto map outside_map 1 set transform-set ESP-3DES-SHA tunnel-group 1.2.3.4 type ipsec-l2l tunnel-group 1.2.3.4 ipsec-attributes ikev1 pre-shared-key SomeSecureKey$ crypto map outside_map 2 match address s2s-VPN-2 crypto map outside_map 2 set pfs crypto map outside_map 2 set peer 4.5.6.7 crypto map outside_map 2 set transform-set ESP-3DES-SHA tunnel-group 4.5.6.7 type ipsec-l2l tunnel-group 4.5.6.7 ipsec-attributes ikev1 pre-shared-key SomeSecureKey2$
Maybe you are looking for
-
When vistiting some websites, it says not availible in this country
Hello My question is; I would use swagbucks but it says it is not available in the Netherlands (I know that you can not solve the problem), but y at - it an option that you can then change my country is changed. I have no problem with the fact that t
-
Internet problem after upgrade to 10.11.3
someone at face safari connection problem after the upgrade
-
Satellite A50 - starting possible USB DVD writer external?
I have a Satellite A50-11 four years old, I need to format a partition of the hard drive (the one with XP) installed but my DVD burner is broken.My BIOS supports booting by an external DVD burner? Where it shouldn't, should I have any other possibili
-
Title original-discount on Windows 8 I am trying to install windows on windows updates 8. However, it will not install and gives the error message "you need give the administrator permission.» To perform this task, yo need to connect with an administ
-
Where can I find a driver for Canon i-sensys MF4120?
Original title: Driver needed Where can I find a driver for Canon i-sensys MF4120