VPN site to Site using the router and ASA

Similar Questions

• EIGRP running between the router and ASA by switch

  Hello

  Is that possible I can running an EIGRP between router and ASA by switch?

  Router and ASA connected to the switch with static route.

  Hi Tommy Chin.

  It is possible, we must advertise to the route between the router and ASA.

  Please provide your connectivity diagram to better explain.

  For example...

  interface GigabitEthernet0/0

  Description links to WAN router

  nameif OUTSIDE

  security-level 50

  IP 10.1.1.1 255.255.255.192 ensures 10.1.1.2

  Summary-address eigrp 100 10.1.0.0 255.255.0.0 1

  !

  Confiuration Protocol EIGRP

  standard access list eigrpACL_FR allow a

  !

  Router eigrp 100

  eigrpACL_FR distribute-list in the interface outside

  neighbor 10.1.1.3 OUTSIDE interface

  neighbor 10.1.1.2 OUTSIDE interface

  Network 10.1.1.0 255.255.255.192

  redistribute connected

  redistribute static

  !

  Kind regards

  Srinivas.

  Note: if it solves your problem it mark it as resolved.

• L2l VPN with public ip of the router and firewall with private IP

  Dear all,

  I have a requiremnt for site to site VPN configuration but the firewall on the remote end is not obtained public ip, public ip address is termintaed on the router. Please find the attached diagram

  LAN--> Firewall - privateip--> router-publicip - ISP

  How can I set up the site to site VPN tunnel, enjoy emergency assistance

  Thanks in advance...

  Mikael

  You can configure static NAT for 1:1 for the SAA outside interface with a spare public ip address of the router address.

  If you don't have spare public ip address, then you must configure static UDP/500 and UDP/4500 PAT on the router and enable NAT - T on the SAA.

• Networking Windows 7 with XP using the router and no internet - machines cannot be

  Hello

  I searched the web and tried all kinds of suggestions to do this, but my new Win7 machine does not always show my daughters XP machine, and vice versa his XP machine is not showing my win7.

  I don't want to have access to the internet so currently have my machine win 7 connected directly to my hub blank so that I can access internet from my win7 machine.  I then another connection from LAN port on my Win7 machine to the router which is also connected his XP machine.

  In my networks and sharing on Win7, I see my homegroup network, which has access to the internet.  Then the other network to the router shows as "unidentified" and the public, but I am unable to change anything on this subject? So can't make a working group or at home.

  The XP machine has also recognized the network and created a shared folder for its own files, but nothing for the win7 machine.

  Both seem to recognize the router and network, but not each other.  Am I missing something?  If it makes any difference, I've already named two machines with the same workgroup name.

  Is anyone able to offer advice?

  Any help is appreciated.

  Thank you

  Vicki

  Hello!

  First you must make sure that the two PC's on the same workgroup. Just checking if they have the same subnet mask. And finally make sure you works discovered the network on Windows 7 PC.

  If computers are subnet masks different IP addresses, they will not be able to see each other.
   
  That I understood your message, you don't want to not PC your daughter to have access to the internet. You can assign static addresses of daughter and your computers. Try to do this:

  1 assign to computer on Win XP LAN network card public static address 10.0.0.10 and the subnet mask 255.255.255.0.  To do this, go in Control Panel > network connections, choose the connection you must edit (the one that goes to the Windows 7 computer) and click Properties. In the windows that opens, double-click Internet Protocol (TCP/IP). Then choose use the following IP address and fill in the fields with the information above.

  2. the PC Windows 7 go Network and Sharing Center > change the settings of the card and double-click adapter that connects the computer to Win XP. Click on Properties and Internet Protocol Version 4. Then choose use the following IP address and put 10.0.0.11 subnet mask 255.255.255.0.

  3. on the Windows 7 PC to go network and sharing Center > advance change sharing settings. In the public profile check turn on network discovery.

  4. make sure that both computers are on the same workgroup (important)

  After completing these steps computers must be able to meet and communicate.
  Hope this will help. Please let me know the results!

• IPSEC with the router and asa 5510

  Hi all

  I have problems connecting ipsec l2l. I have set up a router and asa 5510 make ipsec between them, but it seems to fail on the phase 1. I already check and I am 100% sure that is the key. You can a few shed light on the issue, I have. Here's the output debug I get the two system.

  Thank you

  Hello

  Isakmp policy match on both devices? What version of ios is running on the router and the asa5510

  Thank you

• VPN between 878 router and ASA 5505

  Hello world

  I struggled for a few days now to get a VPN connection works.

  The situation

  Two offices needs to be connected to eachother with a VPN. The two parties have a WAN connection.

  The tunnel between locations rises very well but the communication fails in almost any way.

  The host cannot ping each other and also the inside of the router and ASA pings fail.

  The only ping works is from inside Site2 to the inside interface of the router side 1 (192.168.1.100 to 192.168.0.250)

  NAT works very well on both sites behind the router / asa.

  I think I'm doing something wrong with the roads or access lists but after 7 days, many refills, restores, driving from one end of the State to the other to reset stupid moves break and resolder my cable from the console and things completely with default start for 10 times, I'm through, I honestly don't know where to look for more...

  Tech Specs:

  Site1: has a cable modem that gives a WAN IP with DHCP address

  This modem connects to the Cisco 878 (Fastethernet0) router

  The router acts as a DHCP server and NAT gateway for the office and offers vpn connectivity to the other office

  Site2: has a cable-modem/router (Cisco 3925), which made the NAT, this modem/router gives an IP private class-C (192.168.178.x)

  This modem/router connects to a Cisco ASA 5505 (Fastethernet0)

  The ASA also server as a DHCP server and NAT gateway for the office and offers vpn connectivity to the other office.

  Online, it looks like this:

  Office 1--> Cisco878--> WAN Cloud<---cablemodemrouter><--- asa5505=""><--- office="">

  IP address ranges:

  Office 1

  Network 192.168.0.0

  Subnet mask 255.255.255.0

  Gateway 192.168.0.250

  IP WAN XXXX

  Office 2

  Network 192.168.1.0

  Subnetmak 255.255.255.0

  Gateway 192.168.1.1

  IP WAN XXXX

  On the location of office 2, there is a NAT between ASA and WAN router. between 192.168.178.x 255.255.255.0

  The modemrouter is a Cisco 3925, on which IPSEC passthrough is enabled.

  Configs:

  Site 1:

  CISCO 878 router

  Site 2

  ASA 5505

  I hope someone has a chance to look through my config and tell me what I did wrong this week

  Even if you can not help me but still read here: Thank YOU!

  (As my problem has been resolved, I removed the configs of this post. If for any reason, you want to work for these devices configuration, please send me a PM)

  Post edited by: taaa lijf - reason: problem solved, removed configs and stuff private for obvious reasons ;)

  Hello

  Ping client customer site 1 site2 and make sh crypto isakmp his and sh crypto ipsec his on the router.

  If sh crypto isakmp gives QM_Idle and ping fails and you have no package in the HS cypto ipsec his and then do a debug crypto ipsec

  If sh crypto isakmp gives MM_NoState can do a debug crypto isakmp

  One note however, you should have ip addresses static at least on the side, initiating the tunnel, otherwise it will not work when ip address changes.

  Kind regards.

  Alain.

• Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but

  Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but I can't it to work on the laptop.

  I downloaded "New tab Pro" on the laptop (do not even see on desktop computers so don't think about) such that she was like the real deal but nope... do not work. Running the latest version of MF, ideas on how activate it please?

  Thank you guys are going to mark as 'resolved' BTW it is no "folder on the desktop named old data from Firefox. Hmmmmmm.

• Offers day and slow downloads WiFi (very slow).  Is there a way that I can download some updates and new programs using my macbook pro (to a public site in the city) and transfer it on my iMac which is too heavy to cart autour?

  Difficulty to access the updates and downloads with very slow wifi ("country").  Is it possible that I can download some updates and new programs using my MaBbook Pro (retina) on a public site in the city and transfer them on my iMac which is too heavy to cart autour?

  New programs, Yes.

  Updates, depends on what you're updating.

• Hello. I am brand new to Adobe. I used the trial and now I'm addicted. However, I ordered Photoshop, put in my credit card information and came to the site. Nothing. I don't have a serial number or E-mail from Adobe. Now I wonder what to do next because w

  Hello. I am brand new to Adobe. I used the trial and now I'm addicted. However, I ordered Photoshop, put in my credit card information and came to the site. Nothing. I don't have a serial number or E-mail from Adobe. Now I wonder what to do because whenever I go to the chat support, nothing is there click on. I just want to start, and it's really frustrating. Can anyone help?

  No, you don't need to uninstall. When you use the chat, you want to make sure you are signed in with your Adobe ID and have cookies enabled on your computer. The cat will become available when an agent is available. See this link:

  Adobe Photoshop CC is still in trial mode after creative Cloud service was subscribed.

• I'm trying to publish my site using the Publish drop and the FTP host option.

  I'm trying to publish my site using the Publish drop and the FTP host option. I enter the details requested and all it gives me, it is an error message of "could not sign you [suite failed to read].» Check your user name and password'. I'm the host my site on One.com. There is no place for me to choose the 20 port (although it should use anyway) and I have spent hours on the design of Web sites and do not want to go to waste. I use a trial version but Adobe say he has all the features of the paid version, which, at this rate, I will not get! I've updated the app 12 days ago. Csomeone help?

  As the error says it's a problem with the user name and password. If your host requires that you use port 20 just add: 20 at the end of your address of the remote host.

  For example: yourRemoteHost.com:20

• Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  Hello

  Please make sure you check "Desktop Redirection" option in the properties of the site.

  Here's how to get there.

  Presentation of the Tablet:

  File > Site Properties > Tablet > check "desktop Redirection.

  Mobile layout:

  File > Site Properties > Mobile > check "desktop Redirection.

  Re-upload the site and then check out. You should be all set.

  If the problem persists, please share the URL of the site for further investigation.

  Concerning

  Vivek

• VPN site to Site with dynamic routing on ASAs

  I'm planning a backup connection to a primary site if our link main broken through two ASAs using site to site vpn.

  This is what I have resulted to date and just need to work through some issues and best practices.

  ##Regular connectivity and Internet traffic flow "> Primary_Internet".

  Backup_Internet - ASA - CoreA - router-->> Private_Wan<>

  ?? If Private_Wan a link down, use via ASA l2l Internet VPN to connect sites

  x - router - CoreA - ASA-->> VPN l2l<>

  ?? Once the link is available, preferred over the private Wan path must be used.

  A few questions,

  1. can I use a routing via the l2l VPN Protocol? VTI, GRE?

  2. If I enter OSPF or EIGRP, will be the last static use of each work in the ASA redistibuting?

  3. in execution of VPN l2l, using 'show the way' does not show available via the vpn routes, only "crypto ipsec to show his" watch info. Is this correct? If yes how metric would work for routes registered if all the links are up and there are many paths to the same subnet?

  Welllll,

  (2) I would keep as simple as possible, you can put all one VPN perhaps NSSA, if your ASA touch BB.

  (3) IPP on ASA is always the insertion of static routes, it is not the best way to generate the backup.

  Marcin

• How to prevent the FF loading all Web sites using the HTTPS protocol

  FF is trying to load initially all Web sites using the HTTPS protocol, including of mozilla.org. Then I get the error of no reliable connection of course. Mozilla .org is the "invalid security certificate" and "the issuer of the certificate is unknown." I tried to delete the file cert8.db as suggested elsewhere but that did not help. If there is an option for this somewhere, I can't find it. I have the latest version of FF and Win7 running. Thanks for the help.

  There must be some sites that are still using a secure connection, as http://www.amazon.com/. If even a link to Amazon is redirected, you can check if you have an extension like HTTPS Everywhere.

  For Mozilla sites, Yes, you establish a secure connection.

  But you shouldn't get certificate errors! When you get this for virtually all secure sites, the problem is usually as follows:

  (1) error of date, time, or time zone who throw checks validity of the certificates of your system. Sometimes allowing to use a timesource on the internet, the computers can introduce this problem.

  (2) not be set up to work with your security software that intercepts and filter secure connections from Firefox. Products with this feature include Avast, BitDefender, ESET, Kaspersky; AVG has a shield search function which can cause this error on search sites.

  (3) malicious software on your system for the interception of secure connections.

  So... who is?

  If you have any of these specific security products, which would be the first thing to check. We might be able to help with specific next steps based on what you have if you tell us.

  Alternatively, you can examine the certificate to which Firefox is opposed to see if the issuer information pointing to the culprit. Take for example my test page:

  https://jeffersonscher.com/RES/jstest.php

  You should see a section "I understand the risks" in the page. If you expand this section, you will find a button Add Exception. You don't need to complete the process of adding an exception (I suggest not adding one until we know that it is not a problem of malware), but you can use the dialog box to display the information that makes Firefox suspicious.

  Click Add an Exception, and then view. If the view is not enabled, try first the button get certificate. Then in the certificate Viewer, refer to the section "issued by". What do you find here, or under the hierarchy of certificates? I have attached a screenshot for comparison of screen.

• I have XP pro and you want to connect to the MSN remote connection that uses my computer through my D Link router so that I can use the router to connect a tablet.

  How D link to connect to the modem connection

  I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.

  Hi Bob,

  You can follow this link & check if it helps:

  How to set up and use remote connections in Windows XP?

  Internet Connection Wizard

  
  Reference: How to configure Internet access in Windows XP Professional?

  Hope the helps of information.

• a problem with the alignment of site on the Tablet and phone version.

  I have a problem with the alignment of my site on the Tablet and phone Version of my site.

  If you open the Tariffuehrer.com site on the tablet or smartphone, you can see, the page is aligned to the left in the browser. I want the page to Center. I did find an option for it in the backend of muse.

  I'd be happy if someone can help me.

  Hi Michael,

  I can't view your site as it showed error 403,

  Can you please recheck the url of your site and repost it so that I can check on this subject.

  Kind regards

  _Ankush