20 Mhz vs 40 Mhz compatibility with
Hello.
I wonder if there is a difference in connectivity at 20 Mhz and 40 Mhz channels in 5 GHz...
Assumptions:
1. I have configured Cisco Client band elect on my WLC
2. I activated the band Client elect on my wlan
3. my wifi dual card has a favorite band selected to 5 GHz
4. my 3700 dual band Access Point configured channel 6 to 2,4 Ghz and channel 36 to 5 GHz.
5. I connect to channel 36 with my ipad.
7. from the perspective of WLC I stay connected to channel 36, but I know that channel 40 is a long string of 36, and now I am connected to a channel of 40 Mhz successfully.
8. I have all of my 600 AP campus with a 5 GHz (40 Mhz for all channels) channel binding. The goal is to increase performance and optimize the use of the spectrum.
Problem:
This week I had a company to conduct a study on the spot in my campus building, and they told me to turn off link in 5 GHz channel because if some dual band devices will not be able to connect to the 40 Mhz channel, they will automatically move to 2.4 Ghz.
There are devices dual band that cannot accept the 40 Mhz channels?
B - if don't support it not that they will be 2.4 Ghz mode directly or they will stay on the servile channel, but using only 20 Mhz?
C - he also said that at 40 Mhz have reduced coverage compared to 20 Mhz channel. is that correct?
I decided to ask the Pro because I'm really suspicious to this topic.
A - There are dual band devices which cannot support 40Mhz Channels?Yes, there is a dual band client that does not support the channel of liaison in 5 GHz. Mostly pre-802.11n dual-band customers.
B - If the don't support they will mode directly to 2.4Ghz or they will stay on the bonded channel but using just 20Mhz?They connect at 5 GHz with a bandwidth of 20 MHz. In any case note that device client is the one deciding what AP they connect and which group. Thus, there may be different behaviors in different clients.
C - He also told me that bonding to 40Mhz will have reduced coverage compared to 20Mhz Channel. is this correct?Now a days WiFi, to reduce access point coverage to meet capacity needs. Challenge with 40 MHz is re - use and co-channel interference. With a width of 20 MHz, you have 13 CH (except UNII-2 Ex) & will be reduced to 6 If you use 40 MHz. So, if you and dense area where more than 6 APs on close by the deployment of 40 MHz could then lead to co-channel interference (CCI), which reduces performance. Deployment of high density therefore prefer to use 20 MHz to 5 GHz channel width or 40 MHz can be used without any other problems. So I would check if they showed to your ITC in your deployment of 5 GHz, then only I would consider to go with 20 MHz on these specific sector and leave the remaining 40 MHz. HTH Rasika * Pls note all useful responses *.
Tags: Cisco Wireless
Similar Questions
-
Clock at 10 MHz continues with 1.8 Vpp using 6544
Hi everyone, I need to have a continuous 10 MHz clock with the help of 8Vpp 1, NI6544. In the examples, I found these 3 examples for me:
1 dynamic generation with voltage Configuration.vi (example HSDIO)
2 dynamic generation with exported (example HSDIO) Clocks.vi
3 gen Dig Pulse Train-continues-Dig Start.vi (example Daqmx)
I have the NI6733 Council. But it wouldn't work with a frequency of 10 MHz. I don't know that it should be fairly simple to build. But I'm stuck right now.
Thank you, Yan.
I think I know what I'm supposed to do with the clock. It seems that I have to generate signals in DIO terminals or I need the signals digital or not.
How can the question, I get a single signal with just Boolean out 1 DIO. I mean, I want to have a controllable DIO with boolean regardless of the time. It's like I would have:
DIO0--> set to true, it gives me 1, 8V. If set to false, it gives me 0V. And it continues to run until it is manually stopped.
Thank you
Yan
-
El Capitan compatibility with Office 2016
Are you convinced that install OS 10.11.1 El Capitan can solve the problems of compatibility with Office for Mac 2016?
First of all, the only available version of El Capitan is 10.11.4, second, you, what are the problems with compatibility? I'm not aware of anything. Maybe you can offer them upward.
-
I had the problem of the Firefox page successfully updated the opening whenever I started Firefox and have been since fixed one, but whenever I start Firefox (version 10.0) it checks compatibility with modules whenever
Hi organicdj,
You should watch the unsaved Preferencessection. It could be a problem with the pref file that does not store the fact that this control has already been run.
Hope this helps!
-
How to recharge the old version of firefox? A new not compatable with roboform.
Downloaded the new version and discovered not compatable with robo form. tried to use my computers systems restore points but now nothing happens when I try to open firefox.
What version of Roboform, what version of Firefox?
-
Satellite Pro L100: USB2 drivers do not have compatibility with Win XP
SAT Pro L100 - I loaded the USB 2 drivers received using a prolific USB to Serial Comm Port (Sunix - UTS1009B) a single port USB to serial port cable.
In each instance of loading the drivers message appears "did not the Windows Logo test for compatibility with Win XP. If continue or stop, drivers do not work.
Seems as if there is a problem loading the USB 2 drivers. need assistance?
Expensive branded
That s nothing unusual.
Many 3rd party drivers have not been tested by Microsoft and the message appears so that the pilot didn't make the Windows logo test for compatibility with Win XP!But if you use a driver that was designed for Win XP, you just continue and finish the installation.
So, don t worry not and follow these steps!
Best regards
-
10.11.2 OSX compatibility with EpsonScanner V330
10.11.2 OSX compatibility with EpsonScanner V330
Check the Canon website to see if they support the unit on OS X 11.11.2. Apple does not have the printer and scanner drivers, these are provided by the manufacturers of the devices.
If Epson does not support the unit on 10.11.2 so be sure to visit Vuescan and download a trial version and see if it works for you.
-
Discrete cards compatibility with HP ENVY h8-1403es
Hello
My friend wants to change his 640gt included in a HP ENVY h8-1403es for another graphics card. He wants to install a 770gtx but it seems impossible because of lower power, not enough distance to place it in the pc box and has problems with motherboard bios "IPMMB-FM (Formosa)" it seems has no compatibility with the 770gtx series and others... causing a black screen at startup bios.
I read something about the best compatibility with the gtx 6xx series, but first of all, I want to be sure compatibility in the Bios that the models or similar.
Can you please confirm compatibility graphics cards?, updates or bios problems?, also to ensure that the problems of knowledge. ? It is the only location only?...
A recommendation on compatible cards?
Thank you very much.
Hello
Apply the update posted last BIOS prior to a new installation of the graphics card. You'll need to access the BIOS and disable Secure Boot to apply the update to the BIOS.
HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card
The h8-1403es HP has 460 watts power, so if you do not want to replace the power supply then you need to find a graphics card that meets the minimum power of 460 watts nominal power graphics card manufacturers.
If your friend wants a faster than the 640 graphics card then space must be freed up on the inside to adapt to a double wide graphics especially if the graphics card is of the order of the 770 of NVIDIA. Graphics in the NVIDIA 770 range would require a bigger power supply.
Consult this publication of the article.
Sapphire R7 250 would be much better than the 640, but not in the range of the 770 of NVIDIA.
-
hardware compatibility with windows xp
I tried to install an external hard drive and a USB key, but windows says strongly I should stop installation because the products have not passed windows logo testing. is it safe to go ahead and install it because the two products state that they are compatible with windows xp, or should I not? I don't see a lot of products these days logo on the box of the product, but they claim that they are compatible.
I tried to install an external hard drive and a USB key, but windows says strongly I should stop installation because the products have not passed windows logo testing. is it safe to go ahead and install it because the two products state that they are compatible with windows xp, or should I not? I don't see a lot of products these days logo on the box of the product, but they claim that they are compatible.
Go ahead and install the equipment. If you're worried, see the web site of the manufacturer to ensure that you have the latest version of the driver there (it may be newer than the driver on the CD that came with the hardware).
You won't see a lot of products these days with the Windows XP logo on them because Windows XP is no longer sold by Microsoft and the hardware vendors are focusing on Windows 7.
The list of hardware compatibility XP (or what was her last name) seems to have disappeared from microsoft.com, but the following information of theversion of Windows 7 is basically the same as it was for XP:
The "Compatible" green check icon means the manufacturer of the device or software that this product works with 64-bit or 32-bit Windows 7. Generally, you won't need to do anything to ensure compatibility, and you will see "no action is needed" below "Compatible" on the product details page. However, if a manufacturer or Publisher offers or requires additional software or a newer version, you will find a link to what you need and see the details to the right of the link. Please note that these products have not been "Compatible with Windows 7" Logo program compatibility testing In addition, consult the manufacturer or the site of the Publisher for more information.
"Compatible - Windows 7 Logo" means that this product meets requirements for compatibility with 64-bit and 32-bit Windows 7 from Microsoft. To get the "Compatible with Windows 7" logo, software and hardware must pass tests installation, performance, reliability, and security of Microsoft designed so you can be sure that these products are compatible with Windows 7.
Almost always, if the manufacturer says that its product is "compatible with" a version of Windows, it is safe to install.
-
so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?
Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.
-
Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.
Windows XP Service Pack 3 is running.
I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?
Hi deanie3,
We will check if the following is useful.
Method 1: Run the next Fixit and check the issue.
Hardware devices do not work or are not detected in Windows
Method 2: Follow the steps in the below article mentioned to see if it helps.
-
My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9
My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9. If anyone has experienced this problem and do you know a solution?
HelloWhat is the full error message?The average while you can also contact QuickBooks for additional help.Here is the link: http://community.intuit.com/quickbooks -
HP pavilion dv6-3280 ca: compatibility with Windows 10
Hello
Just upgraded to Windows 10.
Someone was able to install the drivers for "AMD Mobility HD 5000 Series"
and "ATI Mobility HD 4200 Series"
I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD
and "no driver installed" for the ATI card
Thank you
RJLX
Hey @rjlx ,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.
If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.
If this is not enough, you need to restore the laptop to a previous version of Windows.
Thank you.
-
Full compatibility with Win 8.1 C309a printer?
I have no problem to install the drivers c309a using a Win 8.1 operating system that has all the undates installed, so I can print, however the software suite to operate other functions will not be installed. When you use the latest version of the software of HP to win 8.1, it downloads and unzips but nothing after decompresses happen. The Task Manager shows the configuration of the Installer (32-bit) HP running. I left the Installer run for over an hour with no progress. I repeated this process several times without success.
I contacted HP and they told me the c309a printer is not totally compatibility with Win 8.1 in what all functions like the fax and scanning will not work.
Also, I can see the printer installed from its address of sea.
Is this correct? Dose someone out there know the real story?
Hello
The HP Photosmart C309 is fully supported by Windows 8.1.
Try following the steps below, and then reinstall the HP software and check any changes:
1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7. run the Installer below and check differences:
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109738-1&cc=us&DLC=en&LC=en&OS=4158&product=3737195&sw_lang=Please let me know if this is useful,
Shlomi -
iMic compatibility with Vista?
IMic compatibility with Vista is?
If this isn't it:
http://www.griffintechnology.com/products/iMic/
to learn more. If it is, the site says no.
"kittylizmom" wrote in the new message: * e-mail address is removed from the privacy... *
IMic compatibility with Vista is?
Maybe you are looking for
-
Re: Clean up my laptop?
Is it possible to remove all of my computer for the re - load? I bought the new Microsoft Office, but cannot load on my laptop because there is not enough space. I have deleted a large number of my programs, but I would like to know if there is a way
-
Hello world I'm working on a project that requires testing in the production environment. These products have USB Port, and the only way that we can talk to the product is via the USB Port. The USB port inside the unit under test uses a USB to Serial
-
Dear all. I have 2 progrlams application in the same schema. the intention is to use the 2 different when excuting programs for different applications, and each have to stop and start button, of course, I'll have to stop master. But when I run the pr
-
We lost our cd can microsoft provide us with one and olny license key, we have.
We introduced a new server windows 2008 ROK our maintainer of the server for a year now. Finally, we lost our CD none should conclude, but the license key is the thing can be seen. Microsoft may provide us with another Server 2008 ROK to which our ke
-
Please find my product key number I typed in the product key number which is written on the side of my computer still im says that it is bad number