200 G1: expansion RAM to HP 200 G1

Hello

I just wanted to ask a question about the upgrade memory on a computer HP 200 G1.  The manual indicates that there are two RAM slots for 204 pin DDR3 PC3-12800 (1600 MHz) SO DIMM sticks.  I intend to buy this computer and I would like to switch to 2 x 4 (8 in total) or 2 x 8 (16 total) GB of RAM for this computer using the following RAM bought from NewEgg.com.

http://www.Newegg.com/product/product.aspx?item=N82E16820326282

http://www.Newegg.com/product/product.aspx?item=N82E16820326283

One of those options would work?  And whatever that is not PC3L (they will still work with the combination of card mother-power supply of this computer)?

I want to just make sure I can get my hands on extra RAM memory that is compatible with this computer, so I can at least bump it up to 8 GB, finally...

Thank you very much for your help!

You are the very welcome.

I must have overlooked the fact that you don't need to a single chip.

If you only need one, yes it should work.

Crucial 4 GB single chip you have selected will run in DDR mode.  As long as the memory has the same features (speed and size), it will run in DDR mode.

I put a 4 GB of brand chip in my laptop HP 350 G1 was different from that, he came with, and it works very well in DDR mode.

The System Board will probably reject a higher voltage memory.

Some PC does not start, and some will give an error of memory BIOS that you have to hit the F1 key, every time you want to start windows.

As far as the exact part for the memory of the PC number comes with, you will need to check when you get it.

HP does not always of the same exact brand in each PC. It depends on their source of supply at the time where the PC was built, I guess.

Tags: Notebooks

Similar Questions

  • EliteBook 8440p: problems of Expansion RAM HP 8440p

    I recently decided to upgrade the memory on my EliteBook 8440p. After reading the form of RAM required, I bought one of these: http://www.ebuyer.com/737970-kingston-4gb-1333mhz-204-pin-cl9-ddr3-sodimm-non-ecc-unbuffered-1-5v-me...

    Once the new RAM is installed in the expansion slot, Windows will not start and crashes just on screen "starting Windows." Then I tried a test of memory using the system BIOS diagnostic tool, but the laptop either hangs around 35% (I left it there for about two hours), restarts, or stops altogether. I thought that I would give to the system try, repair tool but which caused also just the laptop restart. Curiously, when I check the "System information" tab the system diagnostics, the two RAM sticks are detected with current and accurate information.

    I contacted eBuyer, they sent a replacement out there, but I'm having the same problem again. So, I thought I would try to install new RAM in the internal slot instead (under the keyboard), but now I have a BSOD during the 'Starting Windows' screen, give me code error, "IRQL_NOT_LESS_OR_EQUAL"

    I read on some forums tech upward. One of them suggested runs what is called 'Memtest' at startup via the CD, I tried, but the laptop restarts only during the first passage of the test of memory (and of course some loops over and over again until I remove the CD).

    I'm starting to lose hope! Any help/advice/suggestions would be greatly appreciated.

    Hello:

    See this related post.  You must use a very specific memory in this model, or it won't work.

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634/highlight/true#M335108

  • EliteBook 1040 G3: Expansion RAM for Elitebook 1040 G3

    Hello

    I bought a G3 EliteBook 1040 with 8 GB of RAM and the dealer told me that the memory can be expanded to 16 GB. However, I have found no info on how to proceed? Or even any other information it can be done apart from what is stated on the website of resellers.

    Can someone help me?

    Kind regards

    Erik

    Hello

    This option is for pre-built, nonrepeating as mentioned on page 1 of the following book:

    http://h10032.www1.HP.com/CTG/manual/c04950804.PDF

    Kind regards.

  • HP HDX 18 1080 - EL: expansion RAM on HP HDX 18 1080 - EL

    Hi all, I have a 6 years HP HDX 18 1080 - EL and I would upgrade from 4 to 8 GB RAM. What type/model 2 x 4 GB of ram should I buy for this pc? He accepts only right of DDR2?  How may improve overall performance apart to replace the HDD with SSD and increase the ram? Thank you very much in advance

    Here are the specs:

    Operating system
    8.1 pro 64-bit of Windows

    CENTRAL PROCESSING UNIT
    Intel Mobile Core 2 Duo T9400 2.53 GHz
    Penryn 45nm technology

    RAM
    4, 00GB DDR2 @ 398 MHz (6-6-6-18)

    MOTHERBOARD

    Quanta 3610 (CPU)

    CHART

    Monitor generic PnP (1920x1080@60Hz)

    MBNVIDIA 512 GeForce 9600M GT (HP) 49 ° c.

    STORAGE

    232 GB Seagate ST9250827AS (SATA) 40 ° C
    232 GB Seagate ST9250827AS (SATA) 32 ° C

    OPTICAL DRIVE

    Optiarc BD ROM BC - 5500S

    AUDIO

    IDT High Definition Audio CODEC

    Up to 8 GB of DDR2 - 800 (4 x 2 GB). It can actually take a Quad Core processor, but the best processor a QX9300 requires his own mother. On your motherboard, you can install a Q9100 or a T9600 for upgrades. Not sure, you won't get as much as your CPU is already very good.

    Yes, a SSD and 8 GB of RAM will be your best updated more effective and if you can be part of those of the SSD. As you can see here, 8 GB memory DDR2 is quite expensive:

    http://www.Amazon.com/memory-G71-340US-PC2-6400-black-diamond/DP/B009V1C4OY/ref=sr_1_8?ie=UTF8&QID=1425776344&SR=8-8&keywords=HP+4+GB+DDR2-800+so-DIMM

    Your repair manuals

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Expansion RAM R420

    Ho need to be contacted by espandere RAM di due R420.

    Grazie

    Buongiorno, OTS will one ' email by putting manage the request e find it tag del Server service.

    Saluti

    Marco

  • Request request by expansion ram Server PowerEdge R310 [MS]

    Buongiorno, I like the memoria di espandere a server Dell PowerEdge R310 dagli Verizon 4 GB a 32 GB.

    Buonasera,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

    - Service tag del Server

    By the spedizione (intervento o):
    1 nome società (o codice client):
    2 address:
    3 City:
    4 Provincia:
    5 cap:
    6 name/last name/number phone/e-mail del referent in loco:

    With the fatturazione
    1 nome società (is it client code):
    Address 2:
    3 City:
    4 Provincia:
    Heading 5:
    Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
    7 partita IVA

    Speaking saluti

    Manual

  • Tecra 510cdt memory

    Sorry, he is transferred to another category by mistake. I'm new here!

    I am interested in buying an upgrade memory 128 MB for my computer Toshiba Tecra 510cdt laptop. The label on the bottom says it is a model 1232 EBYX-ENDI. Serial number: 02715996E. NCP 6026. Manufactured by Toshiba Europe GMBH. F.R. Germany.

    Can you suggest where I can buy a compatible module for this machine?
    Thank you

    Hi Joseph,.

    As far as I know that your Tecra is supplied with a module of non-removable 16 MB of RAM and a spare expansion slot in which you can install up to 128 MB expansion RAM. The NW2042U is the correct plug-in for your laptop.
    This will give you a total 144 MB RAM.

    What RAM module did you remove? You must leave the original 16 MB in place and simply install the new 128 MB module in the expansion slot.

    Be sure to take the steps of antistatic neceaasry before handling the RAM module.

    Kind regards

  • Upgrade memory from 2 GB to 4 GB on Satellite U300-153

    Satellite U300-153 (PSU30E - 09901CG 3) has maximum of expansion RAM 2 GB only.
    This model has 2 slots for memory and each unit of memory 2 GB of suppor slot.
    If I install a 2 GB unit in a slot - everything is OK.
    2 Gb + 1 Gb or 2 Gb + 2 Gb: BIOS detect memory correctly but the crash of Windows Vista for
    blue screen after 2-3 seconds after loading.

    I know about 2 GB limit but can I change something (BIOS upgrade or LIKED) to change this limit?

    Why BIOS can detect 4 GB but charge Vista RCA with it? Deadline is - what chipset?

    Can I fix it and what I should do?

    Hello

    As you say the laptop U300-153 can scale up to 2 GB max.
    I really surprised that the BIOS has detected that more than 2 GB and that the laptop was able to boot in windows. Usually the laptop should not start and begin with more than 2 GB of memory

    > Why BIOS can detect 4 GB but load Vista RCA with it? Deadline is - what chipset?
    > Can I fix it and what I should do?

    Usually it s a physical limitation (motherboard). and you will not be able to upgrade the memory to a higher value is not possible!

    Welcome them

  • Blue screen Bad Pool Header 0 x 00000019 (0x00000020, 0x89637d90, 0x89637eb8, 0x0a250001)

    original title: BSOD BAD POOL HEADER 0 x 00000019 (0x00000020, 0x89637d90, 0x89637eb8, 0x0a250001)

    Had this BSOD repeatedly after expansion RAM

    Help, please?

    OK, I found the cause of the problem...

    After some research, I noticed that the motherboard has a maximum ceiling. 2 GB so the 4 GB is too...

  • Power Edge 2950 request Preventivo [MS]

    Buona.

    I wanted to come take UN preventivo sapere knew UN PowerEdge by:

    Expansion RAM massima possibile (currently 2 GB)

    Estensione di Garanzia (ora scaduta).

    Grazie,

    Tommaso

    Buongiorno,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

    - Service tag del Server

    By the spedizione:
    1. company name:
    2 address:
    3 City:
    4 Provincia:
    5 cap:
    6 name/last name/number phone/e-mail del referent in loco:

    With the fatturazione
    1 nome società:
    2 via:
    3 City:
    4 Provincia:
    Heading 5:
    Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
    7 partita IVA

    Speaking saluti

    Marco

  • Upgrade Satellite A100-200 RAM question

    Hello

    I have a Toshiba Satellite A100-200, I want to move to 4 GB.
    I install 2 x 2 GB kingston kvr667d2s5/2 GB pc-5300 ddr2 667 mhz.

    Every time I make a control sites Internet it tells me to install PC24200 ddr2 533.
    The above will work even as the 4200 ddr2 533hz as those that I want are a lot cheaper.
    Thank you.

    Will be two sets of ram pergorm exactly the same thing as long as they are paired.

    Thank you

    Hello

    It depends on your bus (FSB) front.
    If the modules of 667 Mhz FSB support 667 Mhz then the PC5300 inserted will be run with maximum efficiency (667 Mhz).

    But if supports FSB, only modules of 533 Mhz and RAM will run at 533 Mhz only even using the fastest modules (PC5300)

    So what you need to do is check the FSB value. You can install a hardware diagnostic tool (IE Everest home edition) to verify the FSB.

    See you soon

  • Satego X 200 - 21 d - that RAM for upgrade?

    Hello

    I have a Satego X 200 - 21 d, Modell Nr.: PSPBEE - 007001GR and I want to improve my 2 * 1 GB to 2 * 2 GB memory. Can I use DDR2 memory with support for DDR2 PC2-6400 or DDR2 PC2-5300 speed?

    Thank you
    Wolfgang

    Hello

    I checked the specifications of Satego X 200 - 21 d and it seems that you only need DDR PC2-5300 at least, but you can also buy PC2-6400 modules because they are compatible downgrade. This means that they would run with PC2-5300 speed but that s no problem.

    Just make sure that you are buying high quality modules, e. g. Kingston. Alternative you can order an authorized service provider RAM modules, the part number for 2 GB is PA3513U-1M2G

  • Upgrading RAM on the Satellite X 200

    Hello

    I have a Satellite x 200-15 k. Since a few days I have installed RAM from 2 GB to 4 GB.
    Questions I noticed that the system can read only 3 GB and note of graphic card get bigger as its support turbo cache. No idea why?

    The Web from Toshiba site master > standard system memory: 2 048 (1 024 + 1 024) MB
    Maximum extension: 4 096 MB
    Technology: DDR2 RAM (667 MHz)

    The graphic card manufacturer: NVIDIAî
    Type: NVIDIAî Geforcea? ¢ 8700 M GT supports Turbocachea? ¢ technology
    Memory: 256 MB of VRAM dedicated (up to 2047 MB of total available graphics memory using Turbocachea? ¢ technology with 4 GB of system memory)
    Memory type: DDR video RAM (resp. video RAM DDR and DDR system memory combined)
    Connected bus: PCI Express 16 x

    Hi mate,

    I think that the problem might be in the configuration of the shared memory of the chipset, because the system takes 1 GB shared memory.
    Unfortunately you have no influence since the chipset is automatically assign memory depending on how you install.

    This is no design flaw rather it s (unfortunately) a decision to Intel/Nvidia.

    In this case won´t you have a bit of luck but since Don t work you with CAD applications (which I suppose :)) or similar applications of "memory-hungry" won´t recognize you any show change if it would be different (if you have 4 GB available and not 3Gig))

    Welcome them

  • Questions about upgrading RAM on Satego X 200-21 L

    Ok. i've got the Satego X 200-21 L (as the Satellite X 205 except the screen resolution) and I want to upgrade my memory to work up to 3 or 4 GB.

    1 What is more profitable? An increase of 4 GB or 3 GB? I need it because Vista makes my Latptop very slowly sometimes, and for games.
    I've heard Vista only detect / 3 GB (I have a 32 Bit system) - is this true?

    2. where could I install and build in this helping hand storage work? What I have to go to a toshiba - authorized reseller or I could do in the next electronic market close to home?

    3 should I know something important about him - as a guarantee - it could run out if I increase my working memory?

    THANK YOU SO MUCH FOR YOUR ANSWERS!

    Hello

    You can upgrade your laptop up to 4 GB of RAM. The compatible RAM 2 GB module has PA3513U-1M2G part number. I heard that the problem in recognizing/3 GB should only be solved with SP1.

    Upgrade of RAM do not negate the warranty valid. It is also described in the manuals page 123 s user document. Check it out.

  • RAM for a S2800-200?

    Hi, just got sent a Satallite S2800-200 series with 192 meg to MB ram I think. Looked at the ram and its PC100 but can not find any information to see if the ram can be upgraded and if so what type of laptop for purschase memory, IE: Cinch/etc. Would really like to spend at least 512megs of using programs like 3DS max etc... He also seems to have very little autonomy when not connected to the network, which I assume that the battery is about dead and must be replaced, how possible ways are this and ideas on the cost of a new battery?
    Would appreciate any help they could give. thanx

    Hello Phil

    I found the information that your device can handle with max 192 MB of RAM. The unit is already at the maximum.

    The battery of your device, you can find on http://www.pioneer-electronics.co.uk/laptop-battery/product.php/TOSHIBA/1517/PA2487URG
    I put t know in which country you live, but you can order anywhere. The reference is PA2487URG.

    Good bye

Maybe you are looking for

  • move track from GarageBand to Itunes

    I just recorded a guitar track.  How can I move it to Garage Band ('09, 5.1 (398)) to Itunes (12.3.2.35) so that I can charge my iPod (Classic, 2.0.5)?

  • Not restart my Satellite phone, need to press Ctrl + ALT

    Hello I have problems when I restart the laptop.It started about 1.5 months ago.Now I need to press the Ctrl + ALT when I restart it, otherwise it does not start.If I push the button start a flashing under check mark will only be ber sees on the scre

  • Changing in Windows Vista Home Premium to Windows 7

    My boss's computer works as Windows Vista Home Premium 64-bit.  Can I change this for Windows 7?  I need to change in order to download Internet Explore 11.  Thank you!

  • Burn a CD at higher speed?

    Hello did not burn first CD in awhile... I tried to burn to a few programs, but lets stick with Windows Media Player, I've always found was one of the most easy to use applications. That's my problem... I created everything to start the engraving of

  • LaserJet 2100 pcl6 windows 8.1 Driver needed

    Is there a driver for the HP LaserJet 2100 PCL6 for Windows 8.1 Pro?  I can't seem to find one, I can only find for PCL5 and it won't work with my printer.  Thank you!!!