2008 mac Pro Apple Raid card problems, help!

Hello, I have a mac pro 2008 with a raid set up. I want to get rid of all old raid together upwards and instead put a new ssd in the first Bay. The computer cannot read it because I think that it is always configured as a raid. Does anyone know how to make the available drive bays to new readers? You're help would be highly appreciated. I want to take the Apple Raid card so I can have an additional PCI port and I also want to get out the discs four raid. Just so I can put in a single ssd! Thank you very much.

When you remove the Apple RAID card, readers who were searched will be unreadable. You need to make backups before time, because there is no way known to them read differently.

There is a data cable, called the iPass cable connected to the motherboard to the RAID card. You must remove this cable when you remove the RAID card and reconnect the plug corresponding on the motherboard. Once you do this, you get four bays returned as SATA bays and can install any drives that you like. The problem with a lot of SSDS is that they are 2.5-inch form factor drives and may not fit on a standard sled. Users have used an IcyDock (in the 2008 version and earlier versions) or the newer technology adaptadrive:

http://eShop.MacSales.com/item/NewerTech/ADPTADRV/

... to get the alignment and attached straightened.

Tags: Mac

Similar Questions

  • test hardware mid 2008 mac pro-

    My mid summer 2008 mac pro came with Leopard installed - and I upgrade to Snow Leopard.

    I know for sure that the Snow Leopard hardware test worked by rebooting with the button held down - D but somewhere in the updates of apples - it doesn't work anymore - help on the mac said "If your computer does not restart in Apple Hardware Test restart it using the DVD or USB that contains the Apple hardware test" no clue as to what they mean - what is the dvd provided with the mac - or a DVD that came with Snow Leopard?

    Don't know why my mac has problems with reboots - but, I have a circa 2002 Studio Display, which has 2 usb ports.   I moved my keyboard aluminum to a port on the pro to a port on the display (another port is my Wacom pad - I prefer to use their pen, rarely use the mouse on the keyboard)

    I stop after use that I use only one or two hours per day.    Has no up-to-date software because Apple has stopped selling on media - and has sort of missed the fact that sometimes people jump over a version simply because as its too much headache for update annually.

    If you do not have the original installation diskettes including Apple Hardware test yo can download it here. Make sure that yo select your Mac model.

    https://github.com/upekkha/AppleHardwareTest

  • I have a 2008 Mac Pro needs of more memory

    Wonder if anyone can help I have a 2008 Mac Pro I want to add additional memory.  The designated memory is,

    HYMP125A72CP8D3-S5

    I found some designated memory

    HYMP125F72CP8D3-S5

    Both are latency case good speed and and adapt to anyone not know the difference.  And if there is a chance that it will work.  Their isn't a large part of Apple memory around this country.

    Concerning

    Mark Thomason

    Get only the memory of a place that specify that it will work with your model of Mac and will refund your money if it does not work. Macs are picky about the memory and just match record does not always work. Here are a few places:

    http://www.datamemorysystems.com/Apple-Mac-Pro-memory-upgrades/

    http://eShop.MacSales.com/shop/memory/Mac-Pro-memory#800-memory

  • 8 GB DIMM modules for early 2008 Mac Pro

    I see that OWC is now selling the 8 GB DIMMs for early 2008 Mac Pro (8-core, 3.2 GHz). This leads to the potential total RAM up to 64 GB.

    Anyone has any experience of the use of these, or potential problems?

    Thank you!

    I would call OWC and ask them. I remember not only here posts on this topic.

    However. I myself would buy a chance 2009-2012 in the place and level it. These Mac Pro are the most capable and reliable and 8 GB sticks are 1/3 of the cost of those of 2008.

  • 2008 mac Pro RAM

    I have a 2008 Mac Pro 8 Core Xeon 2.8 GHz with 2 GB of ram. I want to upgrade the RAM and reflected on this but let me puzzled is certified Apple and ECC. Regular RAM DDR2 will work in the computer? And I can't just RAM with a heat sink or only a certified Apple one? What are my options and the best results?

    You can use the non - ECC memory, but you cannot mix ECC and non ECC.

    You need a heat sink.

    Macs are picky about the memory if you need to get the memory of a place that guarantees that they will work with your Mac. Just return form is not enough.

  • 27 "New Cinema Display for early 2008 mac pro

    I have After Effects CS5 (version 10.0.0.458).  My old monitor DVI dead, in order to connect the new 27 "mini DisplayPort monitor, I was told that I need a new graphics card.  My question is, the ATI Radeon HD 5770 will work with CS5?

    early 2008 Mac Pro 2x2.8 GHz Quad Core Intel Xeon

    Memory: 12 GB 800 MHz DDR2

    Course graphics card: NVIDIA GeForce 8800 GT

    Type: GPU

    Bus: PCIe

    The PCIe track width: x 16

    512 MB VRAM

    They are all "work" - CS5 has no specific for CUDA requirement or none of that, because it has simply no such features.

    Mylenium

  • PC2-5300 memory will work in my Early 2008 Mac Pro?

    I picked up an Early 2008 Mac Pro to replace my machine from 2006 and I was wondering if I could use my 16 GB of memory in the new machine?

    Near as I can tell, the only difference from PC2-6400 is speed.

    Thank you

    According to MacTracker database all the Early 2008 Mac Pro using PC2-6400, and you cannot use slower RAM the RAM in the computer is designed to use. Sometimes faster RAM spec can clock on an old computer but the RAM slower than the technique almost never works.

  • Mac Pro 2013 randomly restart problem

    Hello

    Here's my problem: I have a Mac Pro end of 2013 (6 cores, 16 GB ram, over-pants D500, running OS X 10.10.5 with a WACOM Cintiq 21 - UX as my view only) who has, for the last month or so been randomly restart itself.

    There are some days where it might be three or four times and then days where it won't do it at all. Also there are moments where it works well for hours, but then if I turned off the Mac Pro, it will crash and restart. Sometimes it will freeze momentarily application-wise (but the cursor moves but does nothing) before it restarts but usually just the screen goes black and then it restarts without any warning. I still get the black screen with the «your computer has restarted...» Press any key' and of course, it generates a crash report that I submit to Apple every time (that I'll post more recent one below as well.) I did start secure upward, reset the PRAM, booted single-user, just that I found online to do which is recommended. But nothing seems to have done something to help.

    The Cintiq is connected through a DVI adapter to Thunderbolt. I also have Mercury Elite Dual Pro Rack hung RAID normally via Thunderbolt. There are times when I think that there is a problem with the RAID box and the Mac Pro but not sure. As there is a problem with the Thundebolt ports. I tried to pass the cables autour, but it has not seemed to have made all the difference. This also has all seems to have coincided with the last update of OS X where I've also updated the driver for WACOM Cintiq (I since past to the old driver). Is this all just a matter of software conflict?

    I found an Apple Support thread where someone has indicated that a Kernel Panic may cause this, but then it also seems similar to what I've found, that was the issue with the Macbook Pro, which had problems with graphics a bit backward.

    In any case, here's a crash report if it helps and thank you for any help that anyone can send my way!

    Thu Aug 18 02:40:39 2016

    Panic report *.

    panic (cpu 0 0xffffff7f918c0b32 appellant): "ACPI \"PWRD\ "with zero power failure: < rdar://problem/15746463 > ' @/ SourceCache/AppleGraphicsControl/AppleGraphicsContr ol-3.10.25/src/AppleMGPUPowerControl/kext/AMPCPowerManagement.cpp:512»»»

    Backtrace (CPU 0), frame: return address

    0xffffff81fe9dbda0: 0xffffff800f52ae01

    0xffffff81fe9dbe20: 0xffffff7f918c0b32

    0xffffff81fe9dbe70: 0xffffff7f918c0020

    0xffffff81fe9dbec0: 0xffffff7f918be7ad

    0xffffff81fe9dbf10: 0xffffff7f918bed14

    0xffffff81fe9dbf40: 0xffffff800fad394d

    0xffffff81fe9dbf80: 0xffffff800fad3b48

    0xffffff81fe9dbfb0: 0xffffff800f611867

    Extensions of core in backtrace:

    com.apple.driver.AppleMGPUPowerControl (3.10.25) [90 B 87953-018 b - 32E9 - AD83-0526D8E C4749]@0xffffff7f918b8000-> 0xffffff7f918c4fff]

    dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f918b0000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [CA598036-E22A-3AAE-ABB0-9407B560C5C1] @ 7f8fd24000 0xffffff

    dependency: com.apple.driver.AppleGraphicsControl (3.10.25) [3DC2F93F-5197 - 3B 16-8975 - 0142E7A0 474B]@0xffffff7f918b5000

    dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f905d0000

    dependency: ffff7f906b2000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8fdfe000

    Corresponding to the current thread BSD process name: kernel_task

    Mac OS version:

    14F1909

    Kernel version:

    14.5.0 Darwin kernel version: Thu Jun 16 19:58:21 PDT 2016; root:XNU-2782.50.4~1/RELEASE_X86_64

    Kernel UUID: D11F499F-5895-3D58-9101-5671A93D526D

    Slide kernel: 0x000000000f200000

    Text of core base: 0xffffff800f400000

    Text __HIB base: 0xffffff800f300000

    Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

    Availability of the system in nanoseconds: 9763446529233

    last load kext to 4247477026004: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000 size 20480)

    Finally unloaded kext to 4307635021147: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000, size 16384)

    kexts responsible:

    com.kairos.driver.DuetDisplay 1

    com.apple.driver.AppleRAID 4.0.6

    com Apple.filesystems.autofs 3.0

    com.apple.iokit.SCSITaskUserClient 3.7.5

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AGPM 110.19.6

    com.apple.driver.ApplePlatformEnabler 2.2.0d4

    com.apple.driver.X86PlatformShim 1.0.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

    com.apple.driver.AppleHDA 272.18.3

    com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.driver.AppleMCCSControl 1.2.12

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.kext.AMDFramebuffer 1.3.2

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHWAccess 1

    com.apple.AMDRadeonX4000 1.3.2

    com.apple.driver.AppleHV 1

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    3.10.25 com.apple.driver.AppleMGPUPowerControl

    com.apple.driver.AppleLPC 1.7.3

    com.apple.kext.AMD7000Controller 1.3.2

    com.apple.driver.AppleIntelMCEReporter 107

    com.apple.driver.AppleThunderboltIP 2.0.2

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 36

    com.apple.driver.XsanFilter 404

    com.apple.driver.AppleUSBHub 705.4.2

    com.apple.iokit.IOAHCIBlockStorage 2.7.1

    com.apple.driver.AppleUSBXHCI 710.4.11

    com.apple.iokit.AppleBCM5701Ethernet 10.1.3

    com.apple.driver.AirPort.Brcm4360 930.37.3

    com.apple.driver.AppleAHCIPort 3.1.2

    com.apple.driver.AppleUSBEHCI 705.4.14

    com.apple.driver.AppleACPIButtons 3.1

    com.apple.driver.AppleACPIEC 3.1

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleAPIC 1.7

    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

    com Apple.NKE.applicationfirewall 161

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

    com Apple.kext.Triggers 1.0

    com.apple.driver.AppleUSBHIDMouse 185,3

    com.apple.driver.AppleHIDMouse 185,3

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

    com.apple.iokit.IOBDStorageFamily 1.7

    com.apple.iokit.IODVDStorageFamily 1.7.1

    com.apple.iokit.IOCDStorageFamily 1.7.1

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

    com.apple.iokit.IOUSBMassStorageClass 3.7.2

    com.apple.driver.AppleUSBHIDKeyboard 176,2

    com.apple.driver.AppleHIDKeyboard 176,2

    com.apple.iokit.IOSerialFamily 11

    com.apple.driver.DspFuncLib 272.18.3

    com.apple.kext.OSvKernDSPLib 1.15

    com.apple.driver.AppleSMBusController 1.0.13d1

    com.apple.iokit.IOSurface 97.4

    com.apple.iokit.IOAcceleratorFamily2 156,17

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

    com.apple.iokit.IOBluetoothFamily 4.3.6f3

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.iokit.IOUSBUserClient 705.4.0

    com.apple.driver.AppleHDAController 272.18.3

    com.apple.iokit.IOHDAFamily 272.18.3

    com.apple.iokit.IOAudioFamily 203.3

    com.apple.vecLib.kext 1.2.0

    3.10.25 com.apple.driver.AppleGraphicsControl

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.kext.AMDSupport 1.3.2

    3.10.25 com.apple.AppleGraphicsDeviceControl

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.IOPlatformPluginFamily 5.9.1d7

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

    com.apple.iokit.IOUSBHIDDriver 705.4.0

    com.apple.driver.AppleUSBMergeNub 705.4.0

    com.apple.driver.AppleUSBComposite 705.4.9

    com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

    com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6

    com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

    3.1.7 com.apple.driver.AppleThunderboltNHI

    com.apple.iokit.IOThunderboltFamily 4.2.2

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    com.apple.iokit.IO80211Family 730.60

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com.apple.iokit.IOAHCIFamily 2.7.5

    com.apple.iokit.IOUSBFamily 720.4.4

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com.apple.driver.AppleEFIRuntime 2.0

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 398

    com.apple.iokit.IOStorageFamily 2.0

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 3.1

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com Apple.KEC.corecrypto 1.0

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    It seems that you have a hardware problem with one or two of the GPU.

    -Make an appointment at an Apple store Genius Bar.

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

    Mac Pro graphics problems (end 2013)

    Mac pro end of 2013 freezes with the spinning wheel

  • Mac Pro, Apple Cinema display, no brightness control

    Hi, hope you can help me.

    I recently bought a (2nd hand) Mac Pro with an Apple Cinema Display 27 "monitor. El Capitan installed and fully implemented to date. For some reason my Apple keyboard brightness do not work and there is also no under display settings brightness adjustment. I read that some people had similar problems due to some bugs, but it was in 2013 with older versions of Mac OS.

    Does anyone know how I can control (mainly make it brighter) my movie screen? Right now the screen is too dark, and it is not suitable for video editing.

    My config is:

    OS X El Capitan (V 10.11.3)

    Mac Pro (end 2013) - 3 GHz 8 Core Intel Xeon E5

    64 GB 1866 Mhz DDR3 ECC

    GPU: AMD over-pants D700 6144 MB x 2

    PS as you can see in the picture there is no brightness adjustment that I can use.

    The screen is connected via thunderbolt.

    The brightness on the KB (F1 and F2) keys work?

  • Mac Pro Win10 Bootcamp 6 problem

    I have a late 2013 Mac Pro with win10 installed via bootcamp. When I was playing with the correction of memory and Crossfire options for the video driver for my D700 had crashed and would never recover little matter how many times I rebooted, tried different ports etc... I had to log in to safe mode and remove the video drivers and to remove the software to make it work again. Now, I can start in my bootcamp partition but video drivers must always be installed. There is no bootcamp to icon on the taskbar. Apple software update says I last 6 training camp and won't let me reinstall or uninstall. Windows uninstaller won't uninstall bootcamp, Apple provides no bootcamp 6 pilots to the public, helper on OSX bootcamp not download drivers or drive out of them as in the past...

    So what am I supposed to do with my Mac Pro 9 k $?

    < published by host >

    Designed says:

    So what am I supposed to do with my Mac Pro 9 k $?

    What is right. You deleted currently partially drivers and possibly a registry damaged.

    Apple allows the public access to Windows drivers with the help Wizard of BC. El Capitan and superior, with BC 6.x, you can download the drivers for help

    Put it on a USB key, if necessary, start in Windows and run setup.exe from the USB and the test.

  • Mac Pro upgrade graphics card

    Hello

    I'm so curious why apple does not allow owner Mac Pro 1.1 or 2.1 people run Cougar or do not allow to install graphics cards easily. When we (the developers) can update the Rom of graphics cards to work at the Mac Pro, why others shouldn't.

    OK people like APPLE and I love it too, I hope that APPLE love too people. Go further and develop, people make Apple.

    http://forums.MacRumors.com/threads/two-GeForce-9800-gx2s-in-a-Mac-Pro-with-an-e're-power - supply.465792 / #post-627108...

    t

    2006/2007 mac Pros don't have 32-bit EFI/firmware and mountain lion or require a 64-bit EFI/firmware. Previous version were either only 32 bit or content code this compatibility allowed with 32 or 64 bits of the firmware/EFI

    There are hacks to run > Lion on a 2006/2007 Mac Pro

  • My Mac Pro has a hardware problem with the updates

    The material inside my Mac Pro's problems to be expandable to level technology current todays.

    There are a lot of new technologies whose PC users seem to be able to use. But my Mac Pro is stuck with tech pushes now 3 years old.

    I tried looking for answers on google, but there is no information. I tried to search for information that Apple has announced update with news about what is happening, but there is none.

    This is a serious question, as my competitors have a huge advantage technology on me as the problem persists.

    Apple does not level the old computers. You can only buy a newer model if the model you have is no more meet your needs. Depending on the particular model of Mac Pro, you have, it may be possible that others have improved the processors. You can find this article on Google. Then, you can always replace the GPU with a newer version that is compatible. But these are things that you would do, not Apple.

  • Mac pro 4.1 with problem / contrast Color dell u3011

    I have a 4.1 MAC PRO 8-CORE 2.26 (radeon 5870) and use it with snow leopard and recently added the el captain on the second startup disk.

    for a monitor, I use the U of DELL 3011 via display port.

    I have problem with high contrast, even after calibration of the monitor with photo colormunky and since I want to use this game for photo editing is a huge problem.

    the only solution by chance that I found at the Leopard version is to use the TESt MONITOR EIZO and after closing this program everything happens here, it should be! When I open again the test, it looks appropriate to the levels of white on black r correct and distinguished colors are more natural and when I print it is exactly the same.

    unfortunate this model does not work at the start of the captain el drive so I had to ask for help in the community

    Check the settings of improved contrast.

    It is found in the system preferences.

    Depending on the version of Mac OS X, its name varies from random combinations of words such as 'Universal access' and 'accessibility '.

  • How to wake up 2008 Mac Pro in his sleep?

    In the past, when my Mac Pro (2008) fell asleep, I could watch on my laptop under the heading 'Shared' in a Finder window and the Mac Pro would be there. I could click on it and the Mac wakes up.

    Now, I can't see the Mac listed under the section shared in the Finder when its sleepy, so I have to go to press the power button. Back To My Mac is activated in the settings of the energy as 'Wake For Ethernet Network Access'.

    What Miss me?

    It is possible that the Mac Pro does not appear because its file sharing settings have been changed (on the Mac Pro).

    You must have a Hello sleep Proxy on your network, such as an airport or an Apple TV device point.

    Immediately to the request and Hello sleep Proxy - Apple Support

    .

  • early 2008 mac pro run a 2560 x 1440 screen

    I have a Mac Pro (early 2008) with the ATI Radeon HD 2600 XT 256 MB, 16 GB RAM, Yosemite 10.10.5 running. Can I use a screen of 2560 x 1440 with this graphics card?

    MMMmmmaybe... Apparently, it has 2 DVI ports, so you will need a Dual Link DVI to get us to open. You know, of course, this video card is a little

    a-n-t-i-q-u-e and it collects dust well enough, and that there are better cards out there, no? I guess you did... anyhoo, in answer to your question

    Perhaps, possiblly Yes

    This is my sign

    JB

Maybe you are looking for

  • Upgrade to SSD for MacBook Pro 13 "(2011)

    I want to upgrade to a hard drive SSD for my notebook Early 2011 MacBook Pro. What are the specifications of the SSD looking? Is that the kind of 2.5 "(7mm)?"  I was looking at the card SanDisk Ultra II or similar model. What is the process or the wo

  • Remove the drive DVD/CD-RW in Satellite Pro A120

    Can someone help me remove the DVD/CD-RW of this laptop?I already folded the bezel on the original disk, which I am trying to remove to replace it with a DVD - RW drive.I removed the screw - (reported by F6 on the plastic box - which seems to be the

  • Network configuration and the Parental control and Powerline wireless Extender

    I'm looking at one of them to help to get wifi in my addiction. I need this on the same 'network' as my Nighthawk AC1750 router because I use it with wireless security cameras. Two questions about wifi created from extender by current holder: 1. can

  • Need activation key for Highway 2013.

    Hello Someone has an activation code for MS Highway 2013 and not not not using the software. I am willing to pay a reasonable sum for the software and/or the key of activation/series/product number. I won't use misleading key generation or crack code

  • HP Pavilion 15-F003DX: update for hp pavilion 15-f003dx of ram

    I have a HP Pavilion F003DX 15 with 4 GB of RAM... I want to know what is the suport of RAM max memory and what type of memory. I browse internet and web site of HP I n get this basic information. Thank you! Jorge Luis