2011 macbook pro

I have a 2011 end, 13 "macbook pro. A year ago I put the distribution of linux mint on this, since the computer was working super slow. Recently, I tried power on and nothing. I replaced the brick cable power/charging about 5 months ago and recently the battery (it was swelling, push the trackpad to). I tried to reset the SMC, with no response from the computer. No edge, no power, nothing. I also tried resetting the PRAM, still nothing. I noticed that the battery on the MagSafe adapter light is green, but very dark. I tried to disconnect the battery from the motherboard and leaving the charger, always without success.

I am fairly certain that it is a hardware problem, since there is no response whatsoever to what. Just do not know what the question is. I think it can also the OS I put on it, and if so how can I wipe and reset the player.

When you reset the SMC, you see the light on the MagSafe charger briefly change colour?

Tags: Notebooks

Similar Questions

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Early 2011 MacBook Pro GPUS

    Afternoon of God,

    I ran into a problem with my Early 2011 MacBook Pro. While I was working on my mission, my Mac stops completely. I try to restart it again, the screen is grey with red lines on the screen. As he invites you to the Apple logo it load half-way before it stops.

    I rebooted several times and get the same result.

    Can you help me with this problem.

    See if this program to repair Apple Extenstion applies:

    http://www.Apple.com/support/MacBookPro-videoissues/

    If you think that it applies, print this page and take it with you in an Apple Store. Some employees are not always aware of this program.

  • 2011 Macbook pro running slow and beach balling

    My Early 2011 Macbook pro worked extremely slow for a few months.  He is lagging in the start-up and opening of all applications.  It also happened to coincide with my Wifi, refusing to recognize my Macbook, he repeated that a device was already on the network with the same IP address. I tried reseting the IP address several times.  But since he has never done this on other networks I received a new router this week and have not had a problem until now.

    The biggest problem is the race slow, hot and delay.  I have 8 GB of RAM and a 1 TB hard drive. I'm running OS X 10.11.5. Any suggestion or help is greatly appreciated!

    Model name: MacBook Pro

    Model identifier: MacBookPro8, 1

    Processor name: Intel Core i5

    Processor speed: 2.3 GHz

    Number of processors: 1

    Total number of cores: 2

    (By heart) L2 Cache: 256 KB

    L3 Cache: 3 MB

    Memory: 8 GB

    Try and reset your SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    Hope this helps, good luck to you.

  • 2011 MacBook Pro to stay inactive for 12 months +... Possible battery issues?

    If I put mothballed a 2011 MacBook Pro for 1 year or more, I should get the battery removed, even if the computer is off?

    Or can we safely be left in the machine for a long period of inactivity without fear of anything untoward happening?

    How to store a Macbook Pro properly during an extended period of time?

    https://support.Apple.com/en-us/HT201725

    Best.

  • Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

    Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

    Give it time - it may take a few hours depending on the size of your library is

    LN

  • End of 2011 MacBook Pro update

    Can I use memory Module Apple 8 GB 1600 MHz DDR3 (PC3-12800) - 2 x 4 GB to upgrade my end 2011 MacBook Pro (4 GB / 1333 Mhz)?  The representative said it's for 2012, but I read here that some have used it without problems on years later.

    Mac can be very picky with ram, unlike Windows machines. For that it works better with no trouble now or later, be sure to buy ram designed for Macs. Match sticks and speeds. Some Mac does not start if a faster ram is used. Go with 2 x 4 GB 1333 mhm, same SODIMM, made for Apple products.

  • In early 2011, MacBook Pro won't start

    In early 2011, MacBook Pro won't start

    Is-ti connected? Fully charged?

    Give us some facts!

  • How can I switch from OSX Lion 10.7.5 to El Capitan on my end 2011 MacBook Pro?

    How to move from OS X Lion 10.7.5 to El Capitan on my end 2011 MacBook Pro? I get an error 'install the distribution of the error signed by apple. I'm sure I need first to switch to something else, but I have no idea where to start.

    1. check all your applications to ensure compatibility with ElCapitan.

    When those you want to keep (as possible) have a compatible update: you can update after installation.

    2 ElCapitan performs better with more than 4 GB of Ram, although in very low load systems, it runs on 2 GB.

    3. your hard drive doesn't have to be "nearly complete."

    4. go in the Appstore and download ElCapitan (the download comes in your Applications folder)

    The installer is removed after installation, so if you like to keep a copy before starting the installation.

    5. install all applications updated.

  • Lion running on base 2011 MacBook Pro afraid of: upgrade to "El Capitan."

    I have a base 2011 MacBook Pro running Lion 10.7.5. It becomes kind of slow, but I just had it looked at. No problems. I'm afraid of a free upgrade to El Capitan as it may run more slowly. I have much stored and not in the game. Think to pay shop install for $30 Mountain Lion. Thoughts?

    There should be a reason why a Mac starts running slow.  First find the reason (s) and then upgrade.

    A good starting point is a download and publishing a report Etrecheck:

    http://www.etresoft.com/etrecheck

    Ciao.

  • tried to upgrade my 2011 macbook pro at el captaind, now there is nothing

    tried to upgrade my 2011 macbook pro el captain and the computer has lost the os

    You did a backup before the upgrade?

  • How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

    Hello

    I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

    Here are some technical details of my current system:

    -MacBook Pro 15 inch, late 2011 model A1286

    -OS yosemite

    -16 GB of memory/RAM

    -Currently using stock HD

    All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

    Thanks in advance for any help.

    You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

  • Cintiq 21UX DTZ-2100 Compatible with end 2011 Macbook Pro?

    Everyone successfully connected a Cintiq 21UX to an end 2011 macbook pro? I could make using Windows 7 via bootcamp, however I was unsuccessfully trying to get IOS Lion to recognize the monitor. Am I missing something? I'm using the latest drivers and a DVI - I to mini display port connector.

    Thank you!

    M rich

    As much as I hate to say it, for the sake of someone else who has this problem, I'll answer my own question. I talked to a representative WACOM today and they asked if I'd handed the switch at the rear of the CINTIQ to DVI mode or if it was the VGA mode. Of course, it is VGA. After I hit the switch of the CINTIQ worked perfectly.

  • Looking to update Early 2011 Macbook Pro 13' to the SSD and need advice

    Hi - I'm looking to upgrade my Macbook in early 2011 Pro 13' with an SSD. Here are the specs of my current computer. Would be grateful if someone can offer an experience on the SSD can / should go with. Thanks in advance!


    Presentation of the material:

    Model name: MacBook Pro

    Model identifier: MacBookPro8, 1

    Processor name: Intel Core i7

    Processor speed: 2.7 GHz

    Number of processors: 1

    Total number of cores: 2

    (By heart) L2 Cache: 256 KB

    L3 Cache: 4 MB

    Memory: 8 GB

    Boot ROM version: MBP81.0047.B2C

    Version of the SCM (System): 1.68f99

    Material UUID: 3565290B-8047-51EB-9D7E-82ED8091ADB6

    Motion sensor sudden:

    Status: enabled

    Chipset Intel 6 series:

    Vendor: Intel

    Product: The 6 Chipset series

    Link speed: 6 Gigabit

    Negotiated link speed: 3 Gigabit

    Physical interconnection: SATA

    Description: AHCI Version 1.30 taken in charge

    TOSHIBA MK5065GSXF:

    Capacity: 500,11 GB (500,107,862,016 bytes)

    Model: TOSHIBA MK5065GSXF

    Review: GP005B

    Native Command Queuing: Yes

    The queue depth: 32

    Removable media: no

    Removable drive: no

    BSD name: disk0

    Turnover: 5400

    Media type: rotation

    Partition map type: GPT (GUID Partition Table)

    S.M.A.R.T. status: verified

    Volumes:

    EFI:

    Capacity: 209,7 MB (209,715,200 bytes)

    BSD name: disk0s1

    Content: EFI

    Volume UUID: BDC1974F-6B8C-3DAE-9DB2-3AA3C17BF506

    disk0s2:

    Capacity: 499,25 GB (499,248,103,424 bytes)

    BSD name: disk0s2

    Content: Apple_CoreStorage

    HD recovery:

    Capacity: 650 MB (650,002,432 bytes)

    BSD name: disk0s3

    Content: Apple_Boot

    Volume UUID: 313A61DC-A35D-3021-96F5-1B24A04C0022

    See:

    https://eShop.MacSales.com/upgrades/MacBook-Pro-13-inch-early-2011-2.7-GHz/inter nal-discs

    They also provide videos for how to replace the HD with an SSD.

    You can also use more common 2 1/2 inch SSD, although some users have reported some probloms with the EVO Pro 850 Samsun

  • Any way to fix the keyboard backlight does not not 2011 macbook pro

    No way to fix the keyboard backlight, what does not work, on my macbook pro 2011. El Capitan was installed earlier. I had a gray screen the other day and had to restart in safe mode. That's when the backlight is out. Thank you very much!

    Susie

    1. press the F6 key twice.

    2 reset the SMC and NVRAM.

    Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

    Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

    https://support.Apple.com/en-us/HT201295

  • How much is my 2011 macbook pro is worth today?

    MacBook Pro: (15-inch, late 2011)

    2.2 GHz Intel Core i7 processor

    4 GB 1333 MHz DDR3 memory

    Graphics Intel HD Graphics 3000 384 MB\

    Think I want to upgrade to a smaller mac, but don't know what to do with the current I. Apple buy back old products?

    Go to eBay and do a search for the same model. Filter results to show only sold items. This will give you an idea of how it is actually, as opposed to what the owners think they should.

Maybe you are looking for

  • Numbers of wired keyboard has stopped working

    I have a keyboard attached to a wired Macbook Pro Apple. The keyboard worked fine for a year apart from the occasional glitch when it stops working, I add an extension of cable and it starts working again.  However, all of a sudden the numbers on the

  • Update disk for Satellite M30X-102

    Hello No one knows what drives I can install in my M30x?Currently, I have a 40 GB toshiba drive. I would like to know if BIOS supports more than 80 GB drives.Thank you!

  • NB100-11R - screen says "BusyBox" on start up

    Have had my Toshiba NB100-11R of the Comet for 2 days and worked very well :) But... When I went to turn it on this morning the screen loadup (Ubuntu) did nothing and it went to a screen that says "BusyBox v1.1.3 (Debian 1:1.1.3 - 5ubuntu12) built-in

  • Impossible to download SQL Server 2005 Express Edition Service Pack 4 (2463332 KB)

    Impossible to download SQL Server 2005 Express Edition Service Pack 4 (2463332 KB)

  • Pavillion 500-424: setting of the keyboard

    I just got this computer and the keyboard is equipped with all those different buttons above the number keys which run along the top, not those on the side. Where would my other keyboard keys F11 etc but these has pictures on them. None of them work.