In early 2011, MacBook Pro won't start

Similar Questions

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Early 2011 MacBook Pro GPUS

  Afternoon of God,

  I ran into a problem with my Early 2011 MacBook Pro. While I was working on my mission, my Mac stops completely. I try to restart it again, the screen is grey with red lines on the screen. As he invites you to the Apple logo it load half-way before it stops.

  I rebooted several times and get the same result.

  Can you help me with this problem.

  

  See if this program to repair Apple Extenstion applies:

  http://www.Apple.com/support/MacBookPro-videoissues/

  If you think that it applies, print this page and take it with you in an Apple Store. Some employees are not always aware of this program.

• MacBook Pro won't start - runs in a loop

  Hi guys,.

  After a few days trying to figure this painful problem, I am at the end of my home and hope someone can help.

  I have a 2011 MacBook Pro, which has recently started having problems to start. During a game session (SIMMS), he all of a sudden to stop and refused to restart, and since then I have been unable to use it at all. The MBP has a new installation of El Capitan on it, but it has been working well for the past two weeks since the installation.

  I tried the safe mode, mode of recovery etc, but it would not boot in any of these either. Finally, I put it target mode and reloaded El Capitan of another 'companion' MacBook Pro. This process went smoothly.

  After loading it, I started from the MacBook to make sure that the operating system works OK, and it was 'companion '!

  I restarted the "Companion" MBP and ejected the defective MBP and tried to restart it normally. No go, would not even boot even with the new OS.

  I tried a number of things so he can begin as a result of this new facility, but all that happens is that he'll do the Apple Logo, try to start, stop, and then go around in circles.

  Finally you will stop on the gray screen and the fans will start and keep running.

  I'm at the end of my knowledge, so any advice would be welcome!

  Thank you

  Have you tried SMC and NVRAM resets?

• Looking to update Early 2011 Macbook Pro 13' to the SSD and need advice

  Hi - I'm looking to upgrade my Macbook in early 2011 Pro 13' with an SSD. Here are the specs of my current computer. Would be grateful if someone can offer an experience on the SSD can / should go with. Thanks in advance!

  
  

  Presentation of the material:

  Model name: MacBook Pro

  Model identifier: MacBookPro8, 1

  Processor name: Intel Core i7

  Processor speed: 2.7 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 4 MB

  Memory: 8 GB

  Boot ROM version: MBP81.0047.B2C

  Version of the SCM (System): 1.68f99

  Material UUID: 3565290B-8047-51EB-9D7E-82ED8091ADB6

  Motion sensor sudden:

  Status: enabled

  Chipset Intel 6 series:

  Vendor: Intel

  Product: The 6 Chipset series

  Link speed: 6 Gigabit

  Negotiated link speed: 3 Gigabit

  Physical interconnection: SATA

  Description: AHCI Version 1.30 taken in charge

  TOSHIBA MK5065GSXF:

  Capacity: 500,11 GB (500,107,862,016 bytes)

  Model: TOSHIBA MK5065GSXF

  Review: GP005B

  Native Command Queuing: Yes

  The queue depth: 32

  Removable media: no

  Removable drive: no

  BSD name: disk0

  Turnover: 5400

  Media type: rotation

  Partition map type: GPT (GUID Partition Table)

  S.M.A.R.T. status: verified

  Volumes:

  EFI:

  Capacity: 209,7 MB (209,715,200 bytes)

  BSD name: disk0s1

  Content: EFI

  Volume UUID: BDC1974F-6B8C-3DAE-9DB2-3AA3C17BF506

  disk0s2:

  Capacity: 499,25 GB (499,248,103,424 bytes)

  BSD name: disk0s2

  Content: Apple_CoreStorage

  HD recovery:

  Capacity: 650 MB (650,002,432 bytes)

  BSD name: disk0s3

  Content: Apple_Boot

  Volume UUID: 313A61DC-A35D-3021-96F5-1B24A04C0022

  See:

  https://eShop.MacSales.com/upgrades/MacBook-Pro-13-inch-early-2011-2.7-GHz/inter nal-discs

  They also provide videos for how to replace the HD with an SSD.

  You can also use more common 2 1/2 inch SSD, although some users have reported some probloms with the EVO Pro 850 Samsun

• what early 2011 macbook pro compatible

  is the material on my macbook in early 2011 pro spec high enough for exploitation macOS Sierra

  Yes.

  (144777)

• Mid-2015 MacBook Pro won't start every 2 weeks, need to restore from a backup.

  Hello all, big problem, Apple says that it is not material (although I'm not sure), but if not, then there must be some sort of conflict between my installed software and the new model of MacBook Pro mid-2015. Help!

  The problem here is that I've been running EXACTLY the same configuration on a MacBook Pro 2012 since, well, 2012, without any problem. But when I received the new machine in December, I migrated everything on (using Migration Assistant), I have installed a Bootcamp partition, migrated my old installation of Windows on the use of WinClone, and everything was fine for about 2 weeks. This is the same process as I did when I upgraded the machine from 2009 to 2012 also machine well.

  Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

  I called Apple, went to two Apple stores, and we all tried to run disk utility to fix the problem. But every time I find myself with a message "Invalid node structure. The volume could not be completely checked. File system check exit code 8. Updated scores of start-up of the volume as required. File system check or repair a failure. Operation failed... "The topic on this bed,"first aid process has failed, if possible, back up the data on this volume. »

  The idea of first re - install the operating system didn't work... apparently there was a problem with the volume at this point so he would not restore. The next option was to completely erase the partition and then restore the backup. That worked, but then the entire process repeated two weeks later.

  I have been through this process 7 ~ 8 times since December! It seems to happen every two weeks and no one can tell me why it's happening on this new machine, but I have NOT had the problem on the old machine running the same configuration.

  
  

  Apple said it might have something to do with execution Tuxera NTFS on Mac (if I can share documents across side Windows). I have not removed... Tuxera two restorations there is no change.

  I also use Paragon HFS + for Windows, because most of my material is actually stored on the Mac side. I have NOT yet removed this (current running Windows 10) because I have NO idea why or how something running on the Windows side could affect the operating system volume on the side of Mac... especially when everything I do is opening and closing things as Word documents.

  I have log files and screenshots (I write below a few... but there are many others). Apple says "it is not a hardware problem" so they won't have to help understand if it's just software. I beg the community to help!

  Here's what I new material:

  MacBook Pro (retina, 15 inch, mid-2015)

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  AMD Radeon R9 M370X 2048 MB

  This graphics card is the NEW one, first, that I do business with AMD

  My OLD machine is:

  MacBook Pro (15-inch, mid-2012)

  Intel Core i7 2.7 GHz

  16 GB 1600 MHz DDR3

  Intel HD Graphics 4000 1536 MB

  Any help or ideas are appreciated!

  

  Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

  This occurs when the drive Boot CAN get the initial Blob of the software off the drive with the boot loader, but when he tried to mount the disk with the file system, it can not be mounted. It runs a single past of [essential] disk first aid. If the drive cannot be mounted, your Mac can not do something useful, he died.

  If the problem could not be fixed quickly, you should have been advised to REPLACE this hard drive.

  This is what you need to do now and stop wasting your time. A new drive costs less than $ 100 and will solve your problems.

• MacBook Pro won't start not

  Hello

  I have a MacBook Pro that, if I'm not mistaken that I bought in 2009. So, last week I had several open files and I was typing on a Word document, I typed whenever he got more lag. Then my laptop just turned off automatically and I received a message (I don't remember very well what it read) and after that I tried to turn it on again, the start bar just loaded up to half, he stayed there for 10 minutes, then the computer is turned off again. Help, I can't lose the files that I had in this computer. What should I do?

  Thanks for your help.

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  If no success, using the original installation CD and see if you can start the MBP.

  If you can, after the language selection, the display should have a top menu bar.  Click on UTILITIES and select and run disk utility > first aid.  If the disk cannot be repaired, a new will be necessary.

  If you cannot start with the installation diskettes, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Early 2011 MacBook Pro 13 will be able to run MacOS Sierra

  I have early 2011 GPE 13 '' that still works great! However, I am curious to know if she will be able to upgrade to Mac OS Sierra once that came out. If my memory is good, she is 64-bit (notebook is not in front of me right now).

  Yes, it will be.

• Beginning of 2011 that MacBook Pro won't start, watch display rose with logo

  

  Hi, my macbook froze, out of the blue, this morning, and I was unable to turn off normally so I forced a strong power down by pressing the power button until it is turned off. Since then, whenever I try to turn it on, it is pink and the display is fragmented and lines crossing (see photo) and the progress bar does not go to Midway. On a few attempts, he went from the brand halfway on the progress bar on a white screen.  I tried:

  -reset the NVRAM

  (which caused his startup rose once again, but she suddenly turn into a blue screen United, but I ended up forcing a power down again after that stayed turned blue for 10 + minutes).

  -a secure start

  (she who seems to do nothing simply creates the macbook to initialize rose as mentioned above.)

  -a SMC reset

  (what could start the startup system rose, but then switch to a black screen after the mark halfway on the progress bar).

  Annoyingly enough, my macbook is nearly a year out of applecare. Is there a solution that you guys may be familiar with? However, I have some files on the hard drive that I just can't lose, so I don't want to do anything to jeopardize the files.

  (which does absolutely nothing, the screen is initializing ink

  Please disregard the last line "(qui absolument does nothing...)" "that has been a typo

• MacBook pro won't start - start progress 99% and stops

  I have problems to restart my MacBookPro.

  The last time I used it I made a stop down and done okay.

  Now that I'm trying to start it, it shows me a screen white background with Mac logo and in the background a startup progress bar that goes from 0 to 100%. Before we get to 100% (looks like 99%) it stops. Whenever I'm trying is the same process.

  I appreciate your help to find out what I can do to finish the boot process and start my macbook

  Thank you very much!

  Boot into Recovery and try to launch the first aid/repair disk

  Recovery http://support.apple.com/kb/HT4718

• 2009 macbook pro won't start, stay asleep

  I closed the macbook in the middle of a game of solitaire.  I came back in 5 minutes and it opens to a black screen.  It will awaken no sleep, regardless of the keys on which I rely on.  I sometimes hear a hum.  Please help - I need this for a presentation Monday.  Thank you!

  The closing force pressing the power button for about 10 seconds. Reboot and see if everything is normal.

• My MacBook Pro won't start after update to El Capitan, how can I go back?

  Hello

  I really hope that someone can help me here. I've updated to El Capitan Yosemite yesterday through software update, but now when I start the computer I get "no entry" or sign a circle with a diagonal line through it, or the Apple with the progress bar / error message / black screen and it repeats 3 times then stops.

  I'mnot you know where my disk of Mac OS x is so ideally don't want to reinstall the whole system.

  I did a back up of my work using Time Machine before saving, so I hope that I have most of the things I need backup.

  Restart by pressing cmd - R after the tone. It should boot into Recovery. From there, use disk to check/repair disk utility. Quit disk utility and reinstall OS X.

  The circle with a slash through it means that it does not find the necessary boot files.

• Creative cloud on early 2011 MacBook Pro 13' 2.3 GHz Intel Core i5

  Hello

  I'm trying to get feedback on the question if more creative cloud would go on my laptop current. Cloud creation is required for most of my Masters in journalism classes and school recommend buying a new computer altogether, but I'm exploring options before you go this route (expensive). I heard a lot of different comments; the school said there is no way that my laptop would be favorable as a result, a few friends to HER that I could possibly buy extra memory (I currently have 4 GB). I am looking for honest reviews and impartial on the question of whether it is absolutely necessary for me to buy new hardware altogether as a result of flowing normally (in this case, I would stick with Mac).

  Thank you!

  System requirements vary depending on the different applications:

  For example:

  Creative cloud:

  https://helpx.Adobe.com/creative-cloud/system-requirements.html

  Photoshop:

  https://helpx.Adobe.com/Photoshop/system-requirements.html

  Illustrator:

  System requirements | Illustrator

  Acrobat:

  System requirements | InDesign

  After Effects:

  System requirements | After Effects

• 2011 Macbook pro running slow and beach balling

  My Early 2011 Macbook pro worked extremely slow for a few months.  He is lagging in the start-up and opening of all applications.  It also happened to coincide with my Wifi, refusing to recognize my Macbook, he repeated that a device was already on the network with the same IP address. I tried reseting the IP address several times.  But since he has never done this on other networks I received a new router this week and have not had a problem until now.

  The biggest problem is the race slow, hot and delay.  I have 8 GB of RAM and a 1 TB hard drive. I'm running OS X 10.11.5. Any suggestion or help is greatly appreciated!

  Model name: MacBook Pro

  Model identifier: MacBookPro8, 1

  Processor name: Intel Core i5

  Processor speed: 2.3 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Try and reset your SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  Hope this helps, good luck to you.