24 e / s digital on the grid of the BNC-2090 a mount.

Similar Questions

• The number of digits on the digital display of cursor

  I have a slider control with a display of %.1f format that works well for the scale. On the appearance tab, I checked the digital displays, see the. This view seems to have no formatting control. I tried to adjust the size, but it adjusts not perfectly, either too many numbers or partial numbers. Can it not be controlled except by creating my own indicator?

  Also, I would like to know the difference between digital and digital display on the tab of display format.

  Thank you

  JVH

  Move the cursor to properties-> display Format. And where it says 'Digital' choose digital display. Then you can format.

  jvh75021 wrote:

  Also, I would like to know the difference between digital and digital display on the tab of display format.

  Thank you

  JVH

  It seems that you know the answer yourself.

  'Digital' formats the numbers of legend of the balance. 'Digital' formats the digital display.

• Number shaped with two digits "behind the point" :-)

  Hello

  Please excuse my very bad English because I'm french :-)

  I use the beta JDE v4.7 and the Blackberry Storm Simulator included.

  I would like to know how to format a calculated result as #. # (a floating-point value with two digits "behind the point') to display in a RichTextField instance.

  I tried this:

  """"
  String strSomme;
  String strSommeTTC;
  Double dblSomme;
  Double dblSommeTTC;
                 
  strSomme = saisieField.getText ();
                 
  dblSomme = Double.parseDouble (strSomme);
  dblSommeTTC = dblSomme * 119,6 / 100.0;
   
  Trainer fmt = new Formatter();
   
  strSommeTTC = fmt.formatNumber(dblSommeTTC,2);
   
  RichTextField affichageField = new RichTextField ("sum TTC:" + strSommeTTC, Field.NON_FOCUSABLE);
  Add (affichageField);
  """"
   
  Only the small portion of code compiles fine but I get an exception when you run the program in the Simulator: javax.microedition.global.UnsupportedLocaleException

  I don't know if the Formatter class is the best way to convert a 45.528652541 to 45.53 number for example.

  Thanks for any help.

  Nice day.

  Marc

  I ended up writing a method to do this...

      final static String toString(double sum)
      {
          // Turn random double into a clean currency format (ie 2 decimal places)
          StringBuffer result;
  
          if (Math.abs(sum) < .01)
          {
              result = new StringBuffer("0.00");
          }
          else
          {
              if (sum > 0)
                  sum = sum + 0.005;
              else
                  sum = sum - 0.005;
              result = new StringBuffer(Double.toString(sum));
              final int point = result.toString().indexOf('.');
              if (point > 0)  // If has a decimal point, may need to clip off after 2 decimal places
              {
                  if (point < (result.length()-2))  // eg "3.1415"
                  {
                      result =  new StringBuffer(result.toString().substring(0,point+3));
                  }
              }
          }
          return result.toString();
      }
  

  I would like to know if there is a better way!

• How to add 2 points on the Noel e? I don't have a 2nd series of digits to the right of the keyboard.

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  Wednesday, April 23, 2014 23:25:53 + 0000, RobertNortonWZ wrote:

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  You mean you want the e character? These two points are called a
  umlaut. You do not add points; the e with points is another
  a simple e character. There are several ways to get this
  character, but a simple is to hold the ALT key and type 137.

  As a point of information if you are interested, the subject of a
  umlaut is to indicate that the second of the two successive vowels is
  pronounced separately. So the word 'book' is pronounced buk, but the
  Book name is pronounced BO - ock.

• Name of Member validation must contains the five digits in the form of numeric if the account Type selected as ASSET

  Hi team,

  I have a business requirement that I like "validate a HFM member account name must contains the first 3 digits as digital if the user select type of HFM account as ASSET.

  Ex; Member account name: 123_Cash, 125_Loans, 234_Machinery (these members returns true) if these accounts "Type of account selected as active.

  I wrote a rule like below, but it is not validate properly and returns true for all members regardless of either digital or alphabets.

  IF (is equal to (String, varValeurProp (Custom.HFMAccountType), Asset),is equal to (integer, substring (propvalue (Core.Abbrev), 1, 3), 1), True)

  
  

  Please correct this validation rule.

  Thank you is advanced...

  Kind regards

  Laurianne

  Hi Andrew,

  Try this,

  If)

  Equals (String, propvalue (Custom.HFMAccountType), Asset),

  IsNumeric (substring (propvalue (Core.Abbrev), 1, 3), False), True)

• I'm the author, but I can't remove security (encrypt your digital ID), the menu is grey.

  I'm the author, but I can't remove security (encrypt your digital ID), the menu is grey.

  You cannot delete always security, signatures or enable. Therefore, it is vital to keep a file unprotected in case you want to change.

• I need to transfer old to newer computer laptop CS5, but lost disk because I have not the number can only find 20 digits in the serial no while I need 24 someone can help

  I have copy of CS5 on the old laptop and really need to do on my newer computer operating system windows, but the purchased disk was originally lost.  Help please I have improved my cameras and they are not supported in CS3 and I don't want to bother with the DNG Converter.  Looking at the details of loading originally in 2010 I have only 20 digits of the serial number that I need to finish loading on the new computer from 24.

  I hope someone can help please

  If your software is still running on your old machine, you can try to save it now. See if there is an Option in the Help menu. If it works, you don't need to know your serial number to get the software registered, but your number will subsequently indicate in your adobe account.

• The C7000 can be mounted?

  Hello
  The C7000 can be mounted? It has holes for screws so it can be attached inside a box of network on the wall?

  I will no doubt tell you don't want not to mount the C7000. In the design phase of the product it goes up once had of the mounting holes on the case, but the material inside is running too hot for the unit safely. He needs ventilation all around him. If you were to ride with one hand against a wall air cannot circulate properly. If you mount your C7000 somehow, I can guarantee you basically you overheat it and have a hardware failure and may even cause a fire.

• Camera is not available because the SD card is mounted on a PC. Unplug the USB cable to move forward.

  I tried to download pictures from my phone.  She does not quite sure why, but the main problem is I can't access my camera or the photos on my phone now.  I get messages like this:- camera is not available because the SD card is mounted on a PC.  Unplug the USB cable from proceed.  I have tried several things and finally just manually disconnected the cable, but not luck. and now also message as follows:- your content is not available because your phone is used as a USB storage device.   Disconnect the USB to access your content.  Would appreciate help!

  Hello

  1. What is the brand and model of the phone?

  2. have you been able to access (or discovered) files on the computer?

  3. what error do you get when you try to copy files to the computer?

  4 you did changes to the computer, before the show?

  Method 1:

  Check out the following link.

  Tips for solving problems of USB devices

  Method 2:

  Connect the phone to another computer and check.

  Method 3:

  Check if the phone includes settings to disable the USB connection.

• BlackBerry Smartphones answered on the VM-605 visor mount

  I just bought the VM-605 visor mount and it seems to work fine other that he was going to let me know when I have an incoming call, except for some light Flash on it - no beep, ring, 'call since... '. "prompt, etc.  What have I done wrong?  I don't want to have to look at him while driving just to find out if someone is trying to call me.

  Dubie

  I thought about it - all I had to do was stop the ringing of my phone for 'silent' and it started working.

• DV7-3160us - for the 2nd hard drive mounting kit

  Hello

  Sorry if the answer is posted elsewhere. I looked and you can't find one specifically for my model.

  I have a dv7-3160us, which has the secondary drive Bay.

  I have a second WD 500 GB SATA bare drive.

  Where can I get information on obtaining a mounting bracket so the cable appropriate to mount this drive naked in the secondary drive Bay?

  I was on the phone with HP tech supp, even after nearly 30 minutes to try to explain what I had it and still had no idea told me he ALREADY had a hard disk of 500 GB in it... :-) Enough of that.

  Any help appreciated.

  WP

  Never mind. He finally found.

  http://newmodeus.com/shop/index.php?Main_Page=product_info&products_id=222

• What is the next step after mounting or triming a video? What type of file format to save and what to do after that?

  What is the next step after mounting or triming a video?

  What type of file format must be registered and what to do after that?

  Hi Jeff,

  I use the file-> export-> video rendering.

  If you don't want the Explorer for the first time, the default value is OK for a nice video.

  Stefanie

• Install the OS via the virtual CD drive (mounted through Magic ISO) of the virtual Center

  Hello!

  Have a quick question here.

  I have an ISO image mounted on my virtual virtual CD drive centre via the Magic ISO software. I created a new virtual machine and install the OS via the virtual CD drive Virtual Center.

  Is it possible - if so how? I am aware that I can insert the CD from the host ESX, CD drive and install.

  Any help is appreciated.

  Thank you

  Concerning

  Hugo

  .. . If the support is fixed somehow either a direct mounting or mounting via a share, then it's ok.  As long as you 'connect to the power' on the set, you should be ok.  Confirmed that the media are indeed bootable?

  When you launch the VIC of?  Try to copy this .iso on the desktop and then mount it from there.

• For the A7 and the A7 II E-mount lenses?

  Will, the e-mount lenses of my NEX-7 function properl. there with the A & and A7 II? I read that the A7 will crop the image to the APS - C format, and reduce by half the number of pixels.

  Lenses designed for the APS - C E-Mount bodies project a smaller image on the sensor as 'Full frame' FE-mount. The A7Whatever will recognize 'APS - C' only Sony lenses when they are attached, and if as bwana has posted, the Capture size APS - C camera is set to Auto, then it will capture an image of reduced size. This is not true of third party (APS - C or smaler) lenses, however. In this case, the camera captures an image "full frame", but probably with a LOT of vignetting.

• Update of the LR - where are the digits of the image and not classified in the view filter grid?

  Hello team Adobe,

  I've updated my LR to the most recent update (2015.7 / 1090788 build) that looks great, but... I'm having some trouble with the changes now affecting my work flow.

  1. where is the image numbering system in GridView?

  I watched each individual option in the 'library view Options' [COMMAND + J], but the number of image for the selected view is not available as an option.

  For example, the previous version would count the images in the grid, regardless of the selection filter applied (a star, five stars, not rated, etc...) which has been

  very useful for me. How can I get that back?

  2 - filtering options are all gone. I have to manually create each option filter manually?

  For example, to filter the images not class preset.

  Help, please! Thank you

  Known bug. Add your vote here: 2015.7 CC Lightroom: Badge numbers in the grid view not visible on the Sierra | Community customer Photoshop family