Install the OS via the virtual CD drive (mounted through Magic ISO) of the virtual Center

Similar Questions

• Cannot install the Solution Center in Windows 7 for HP7310

  I have a HP7310xi AIO that works very well until recently.  I've recently updated Win/XP to Win 7 32 bit and the printer software will not be installed correctly.  I downloaded and tried all the diagnostic tools that I can find on this site, nothing helps.  I can print but cannot scan due to lack of Solution Center software.  I want this to be a device connected to the network and part works very well with the printer, but I repeat, it will be no scanner - is network or USB accessory.

  I downloaded (several times) the file of the AIO_CDB_Net_Full_Win_WW_130_141 software, which is supposed to install the necessary software, but IS NOT INSTALL the Solution Center.  I tried HPPIW for installation and also HPHNDU and HPPDU for the diagnosis of the printer, and who work very well.  I also tried HPPSdr (who works for the printer, but not scan) and HPSDU, which does not at all.

  I still have my original installation CD and I tried, but of course it does not work with Win 7.  I also tried to uninstall the entire software package and then try to re - install, also without success.  It seems that the uninstall process is incomplete, or at least that's my guess.  I tried running also uninstall batch since the original installation CD files (the files to \util\CCC\Uninstall, Uninstall_L1, etc.) and they seem to work, but still the re - install subsequent does not install Solution Center.

  I recently ordered the customers a new installation CD, expecting a full installation CD for Windows 7 and receive.  The label of the CD says it's for "HP Officejet 6300, 7200, 7300 all-in-One-series", and also that it is "Version 13.1.0" and "Windows 7" and "Multiple languages"  It is the number of piece CB744-10003 and seems to be exactly what I need.  HOWEVER... This is ACTUALLY ON THE CD!

  Usefully, the label gives the following instructions:

  Insert the CD in your CDROM drive

  All Windows operating systems:

  (a) click on 'Start' in the task bar, then click on 'run '.

  b} type d:\Setup and click OK (where "d" is your CD drive letter"

  This is exactly what I expected to see on an installation CD; BUT there is NO "SETUP" FROM THE CD FILE!

  The content of the CD is exactly TWO FILES:

  AIO_CDB_Net_Full_Win_WW_130_141.exe, and

  AIO_CDB_Net_Full_Win_WW_130_141.MD5

  The first file is the same as I've downloaded several times on your website and many, tried several times to install.

  THIS CD DOES NOT CONTAIN WHAT THE LABEL SAYS WHAT IT SHOULD CONTAIN.

  I spent a lot of time on the phone with 'Technical Support' (telephone number 1-800-474-6836) and just got a huge evasive.  The best suggestion they could offer was that I should 'upgrade' my printer!  I know the printer is old, and I know that the printer itself is not supported.  However, I expect better than that of a software package that is supposed to take care this device on Windows 7 AIO.

  If I can't get this resolved successfully, I'll upgrade my AIO - but it WILL NOT BE ONE OTHER DEVICE HP!

  Hmm...  I have an Officejet 7410 similar, I used the same configuration file to install and have used it for a few years on my Windows 7 system.  A few questions:

  You have the printer connected by USB or network?

  You said that you had upgraded to Windows XP.  Was this a clean install on the XP machine?

  Are there any error messages during installation?

  There are a few things to try: If the printer is connected with USB, unplug it before you continue.  Navigate to the folder folder (open the Explorer and folder type in the address bar), look for a directory starting with 7z and a date corresponding to when you tried to install the printer.  Go to the util/ccc directory in the 7z... directory and run uninstall_L3, uninstall_L2, and uninstall_L1 files.  (This is the program of uninstalling the version of Windows 7, it might be more effective than the XP uninstall program).  After you run each file three batch restart the computer and log in as a user with administrator privileges.  At this point, run the Setup program.

• Problems to install the Solution Center

  HP Photosmart C6380, later Center of HP solutions web site lists as compatible Windows 8.1.

  408 PS_AIO_4_C6380_NET_FULL_WIN_WW_140_: this file will not be installed Solution Center, only drivers, even though it claims to have installed all the software.

  Is there a way I can get the software suite to a .iso file so I can burn my own installation disc? Then I might be able to navigate the disc and try to install the Solution Center in itself.

  Thank you

  Dave

  Hi Dave49,

  I'm sorry to hear that the final stages has not solved the problem. The next step would be to complete an uninstall of level 3. I've included the steps below for you.

  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  4. open the file 7z
  5 open the util folder
  6 open the folder of the ccc
  7. double-click on the Uninstall_L3

  Once the uninstall is complete, you will need to empty the temp folder. To do this simply follow the steps,
  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  Once you are in the temp folder, you can remove all entries listed. Note that not all entries will be deleted, because some programs are open. For these entries, you can click on ignore. Next, you need to empty the trash. After the Recycle Bin has been emptied, you will have to perform a clean boot. I've included the document "How to perform a boot in Windows". If your computer does not request it, restart your computer.

  Once restart is completed, you will need to download and install the software again. I have included a link to the ' all-in-one HP Photosmart C6300/6324 Printer series full feature software and driver '.

  Please let me know if you are successfully able to install all software.

• Cannot install the Solution Center for HP Photosmart C4780 in win 8.1 64 bit

  When I tried to install the full software from HP, the installantion hung an i had to stop. Since then, I get a runtime error:

  Program: C:\Users\(my username)\AppData\Local\Temp\7zS0615\Setup.exe

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.

  I contacted HP support and the technology has been able to help me to install the base of the printer driver, but I can't use the complete featers (scan, for example).
  I tried to use the HP Installer on site, he acknowledged the printer in my network (wifi) and indicated that there was a prolem and I needed to install the complete software, he then download s/w but to try to run it, I got the same error again once. Help someone?

  Thank you!

  Hello

  Try the steps below to uninstall the existing entries to printer and software.

  Note: Make sure that the printer is not connected to the PC by USB.

  1. Press Win + R to open a window to RUN.
  2. in the window RUN, type %temp%
  3. Opens a window of time, and you will see a list of file names starting with 7z...
  4. Open who has the printer name in it, and then look for the name of the folder UTIL > CCC,
  5. then search for uninstall L3.bat and double-click it to run it.

  Once the uninstall is complete, reboot the PC.

  Now run the HP printer Installation Wizard to install the printer s/w.

• All-in-one Pavilion 23 23-b034: 2 try to install the solution Center HP for printer HP Pavilion has failed. Screenshots

  I had to do a cover of the factory recently. I can print with the HP C7280 programs smoothly. I got this printer and the solution Center works on this pc before the resumption of the plant and another pc before that.  I tried to install my printer HP all One Printer Solution Center now twice with today fails. I hope that the help of screenshots.

  I 1) downloaded a complete new installation - 2) off all antivirus - 3) restarted and restarted the printer HP - 4) the fact that all windows updates have been applied for windows 8.1 - 5) tried after the provided HP solutions but always with failure. Installation all the way to the final "device configuration"... and then expires. Thanks for any help.

  

  

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  RnrMusicMan: (btw, former musician of Navy for this purpose) I need to send thanks a lot for your answer. I have tried, almost to the point of questioning my sanity, too many times tried too many things and all have failed. Why not go and buy a new printer? Financial considerations. Here's what I've worked with... (finally a good result there, at least the best I know for the moment at the end)

  (1) start here, I have an older HP all C720 printer wireless. I do not think at the moment there is a download of the full version which will allow him to install it in a machine of 8.1. An 8 machine if necessary, but not a 8.1 I do not...? That's what I gathered. Where I made my mistake, so, I was this old horse to battle C7280 installed on my newer HP Pavilion and worked very well with 8.1, (read on before thinking 8.1 work with the C7280) when I say great worked, I mean the Solution Center has worked. Then after a while I improved the Pavilion to 8.1 and everything was fine. A couple of weeks, I had to do a cover of the plant on the HP Pavilion. Instead of installing the software of the printer with the center of solutions right then while he was still an OS 8, I upgraded to 8.1 Loaded my favorite of all the programs and tweaks and tricks. Then I said, I'll install the old workhorse C7280. It would not, not at all, regardless of how many tips I read here, and Googling. Then I tried to install the full version of XP on one of the XP machines. No go. Something I said is prevention. Who could know. I tried to purge the XP what I knew could be related to HP. Shut off all antivirus programs, download fees, etc. etc. ad naseum. I have read and read and tried and failed and failed. You get the drama.

  So, I decided that if I could get it on the Acer Aspire one Netbook I could use as a slave, small sorta Acer server. I barely use the netbook anyway. So I couldn't do. Frustration. So I decided JUST ONE MORE ATTEMPT. And here's what I did for Acer.

  I did a factory restore. No former antivirus autour. Nothing is added. Presitine and already had Service Pack 3 with the resumption of the plant.  What follows I have none to little idea of his touch, but that's what I did.

  (2) I have an old modem that I had used as a slave of my new modem D-Link. I got it, because many of my devices will not work on the new 'n'.  I think, old modem old printer, old BONES. I have set the printer to get the old o SSID of the slave and agreed which has no password. Fortunately, I know anyone personally that could use this wireless slave and they all have their own.

  (3) so once again, I downloaded the full version of XP on the netbook. Extracted, he ran, and so he went the full installation and works.

  That's a lot, but I'm a cheap guy who hates to throw even if old devices, good. I use this Chrome extension called Extension Office remotely in order to get on the netbook from any computer and print using the Solution Center.

  I don't know what I did but I know I've worked. So this is my solution. I'm sure some could find another work around, but probably way above my paygrade.

  Once again, thanks a lot for taking the time. I think I followed your solution several, much too long and did not work. Unless I was always doing something wrong.  My solution was radical but it works for me always try to use these appliances. I just take good care of them and they last. My most recent is the HP Pavilion and it's going on 2 years now.

  Differences or questions please ask. 'Jack :-{D '.

• Cannot re - install the multimedia center for think offerings

  Hello! I have Lenovo ThinkPad R61. A few days ago I removed the multimedia center for think offerings. Then, I tried to reinstall multimedia center for think and offers to download the installer of Lenovo site. After installation, I started the program, but the system gave me the following error message: "the certificate file is missing or damaged. How to solve this problem? I can not find the decision...

  Henry85, welcome to the forum,

  If you have a factory installation, you can reload from c:\swtools\apps\MMCfto.

  It should be a setup.cmd file and / or setup.brt, try running those, (one at a time of course). It may seem that nothing is happening for 3-4 minutes, but should work. A member has renamed the .brt .exe file and it worked for them.

  Hope this helps

• Cannot install the driver/software package

  HI (sorry for my English, I'm a Spanish speaker).

  I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.

  I tried everything I could find in the forum and on the outside.

  I downloaded the driver from:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=ES&CC=ar&DLC=es&sw_lang=&product=3745...

  and it can run fine.

  When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.

  So I can't install anything, can not get the HP Solution Center and other software for analysis.

  Is not the antivirus, I tried to close the shields in time, not if.

  I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.

  I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.

  Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.

  Hello

  Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.

  And regarding the specific error:

  Start the installation and follow the steps.

  Once reached the license agreement window, click the 2nd link above (using the Internet).

  Make sure that the two options set as No, thank you.

  Accept the license agreementt continue following the install.

  You see a difference by changing these settings?

  Kind regards

  Shlomi

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• SCSI driver is missing in the virtual machine. Driver is missing in the provided website. Instructions on how to install the driver (once you find) are missing.

  I get the text following error encrypted every time that I boot Windows XP in VMWare Fusion, since I've upgraded to version 4.02 a few months ago.  So I upgraded to version 5.02 hoping the error would go, but he didn't.

  When I try to start it, it says "he has at least a virtual SCSI device installed on this virtual Windows XP computer.

  Windows XP does not include the drivers for the card SCSI BusLogic VMware Fusion uses virtual SCSI devices.
  To use these virtual SCSI devices, install the VMware driver in the virtual machine. "Download the driver of"http://vmware.com/info?id=43"."
  Once I have to dismiss the message, everything seems to work properly.  How can I make this message disappear?

  I tried to go to the useless link that is provided (http://vmware.com/info?id=43), but it takes me just for a general download for all VMWare products page.  Then I tried searching for "SCSI" but it does not have the driver, I'm supposedly dedicated research

  After doing a bit of searching around, I finally found a driver called "vmscsi - 1.2.0.4.flp ', I connect to my virtual floppy drive.  Once I did, my virtual machine wouldn't boot (I get the error "NTDLR is missing.)  I then unplugged the virtual floppy drive, and now my virtual machine starts again.  I then re-connected the drive floppy and discovered the following content:
  Disk.Tag
  Txtsetup.OEM
  vmscsi.cat
  vmscsi.inf
  smscsi.sys
  OK... Now what?  No installer?  What the hell am I supposed to do with it?  I tried a double click on all of these files and have no significant results.  When the pilot is supposed to go?  No instructions? -What VMware calls "support"?

  The VMware Tools GUI has been removed because it has now integrated with the Virtual Machine settings, however you can still use the command line.

  C:\Program Files\VMware\VMware Tools>vmwaretoolboxcmd help
  Usage: vmwaretoolboxcmd  [options] [subcommand]
  Type 'vmwaretoolboxcmd help ' for help on a specific command.
  Type 'vmwaretoolboxcmd -v' to see the VMware Tools version.
  Use '-q' option to suppress stdout output.
  Most commands take a subcommand.
  Available commands:
     device
     disk
     script
     stat
     timesync
     upgrade (not available on all operating systems)
  

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• Install the new OS via CD-ROM PCmcia on 3110CT

  Hello

  I really hope that someone can help me because I'm going out of my mind trying to install a new OS on my Portege 3110CT

  So far, I've tried Windows 98, 98SE, and 2000, I can get them all to install via a back of the PCMCIA card driver, I found but missing some plug-and-play driver installation at the end of the installation. But once installed I can not get the PCMCIA card recognized in windows and I can't get my display to fill the screen. I tried to update the drivers supplied by Toshiba, but none of them work

  I tried to copy the contents of the CD to a second partition on my hard drive and install from there too

  Whenever I try to update the drivers it always says that it has found a better in windows files and uses it.

  I lived all the forums and tried the suggested methods, but I have to do something wrong. The accompanying disk does not work either.

  Thanks in advance for any help

  Chris

  One thing that I did not, it is to update my bios because I have never done this and I'm not sure to leave my PCMCIA card is plugged in, but I read that I have to so that the bios to recognize.

  I put t understand you the problem. If you have already installed the operating system and you have some drivers for additional devices, why you n t download the drivers on the Toshiba site and install it?

  The update of the BIOS is a bit risky.
  If you use a fake or bad update procedure you might damage it.
  Therefore, be careful and read all the details and information about the update of the bios on the Toshiba page before the upgrade.

• Installing the driver on the Qosmio G20

  I have a G20 machine (bought from the Japan) and I want to install my copy of XP pro.

  XP Setup works well until the end, then I start to install the driver and the software as suggested by Toshiba:

  acoustic silencer V1.00.005A
  help V1.02.00_TINASSIST_NUER20MA
  --> NOT INSTALLED atheros wlan 802.11ag / utility V3.1.2.19I123 g
  --> Bluetooth has NOT BEEN followed V2.0 (B20041111)
  Toshiba bluetooth stack V3.3.10.01 BUILD20041209
  Texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
  Utility Intel chipset software installation V6.1.0.1008
  common modules V6.02.04
  ConfigFree V5.00.48
  controls V3.16.2400
  display the change of aircraft V1.6.0.0 utility
  NVIDIA geforce go 6600 display V6.14.10.7118 driver
  Hotkey to display V2.8.0.0 - 00 - XP
  fix for "cumulative security update for ie ' Q834707
  fix for "question in hyperterminal could allow code execution" KB873339
  fix for 'problem in the kernel windows and lsass' KB885835
  fix for "issue in wordpad could allow code execution" KB885836
  fix for 'windows firewall only my network (or subnet)' KB886185
  --> NOT INSTALLED hardware (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
  SM214710AD2 Toshiba software modem
  V8.0.1.1 card WIRELESS Intel(r) pro/100 ve
  PC V3.1.0 diagnostic tool
  development of picture V2.7.0.2 utility
  V7.05.04 energy saving
  Toshiba V1.00.0013 for NUR20 raid driver
  utility RAID V1.2.0.25
  SD V2.0.2.1A memory card format
  secure module SD V1.0.2
  SoundMax integrated digital audio V5.12.01.5240U
  --> NOT INSTALLED sun java 2 runtime environment V1.5.0
  Touch and the launch of V1.2.7.0
  V6.0.304.6 Alps pointing device driver
  Press the start/stop utility V2.05.00
  utilities V4.20.26
  Virtual sound v1.00.05UPDATE
  V2.0.0.5 wireless keyboard shortcut
  wireless network card mini pci Atheros ar5001x V3.1.2.45
  Intel wireless b/g V9.0.1.9 lan driver
  utility V2.0.0.20C zoom

  In addition to the above, I have install the driver of TV tuner driver DVD RAM, the utility Maximizer and does not have the cause of the Atheros 802.11 driver, it seems, the machine has a network card Intel (is true?)

  But when I arrived at the end of this procedure the system starts and works fine the first time, but when I restart the machine that the hourglass will for centuries and I need to restart in safe mode using the Manager tasks.

  I have a feeling that the problem is related to the utility Configfree or be WIFI.

  I tried to uninstall the Configfree but the problem is still there!

  There, can someone help me? !!

  Hello

  You are right. If the device has an Intel WLan card you n t need to install Atheros utility and Atheros WLan driver. But you need the Intel WLan driver.
  I don t think that the problem is the utility Configfree. In my opinion you should check into the full background due to CPU performance process using Task Manager.

  Good bye

• Satellite L50-A01Q - WLAN not detected after installing the Atheros WLAN driver

  I have a C50-A01Q. I recently replace the hard drive for an SSD. I installed Win8.1 via a DVD downloaded from Microsoft. I also installed the Download Driver Atheros Wireless LAN from Toshiba. However, the system does not recognize the WLAN. Someone reinstall windows 8.1? How did you get the driver?

  Maybe your laptop has a Realtek or Intel WLAN card inside. Specification of your laptop does not for me so I can't say with certainty what WLAN card is inside.
  Try to install other drivers and check in Device Manager.

• Help accidentally, I installed the motorola wrong driver on my phone

  I was looking through the motorola drivers on my computer after I downloaded and installed the driver suitable for my phone I accidentally installed the wrong driver what should I do? I noticed how helpful you have been with other people, so I hope you can help me solve my problem because I have more problems with my phone.

  Blaze10000-

  I'm sorry, but there is no Motorola drivers for this phone. Your phone cannot connect to a computer via the USB port to load or transfer data.

  Mark

  Support Forums Manager

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe