problem with installing xp pro on Pavilion dv4-1190ej

Similar Questions

• I have problem with installing WXP Pro on my Satellite M70

  Hello all,.

  I have a M70-160 with XP home SP2 and everything is fine, except a wireless issue. I have a pop-up message that says "limited or no connectivity" when I try to connect to my linksys router. It seems that he cannot take the good IP. I searched the web and found that there is a bug in XP SP2. So I tried to install XP pro (without SP) startup from the CD but when it gets all the checks in the blue screen and then says "starting windows" so I format and clean install, nothing happens. He stayed with the blue screen saying "windows start" for 15-20 minutes, as if long waited. So I turned it off. I tried several times but no luck.

  I just have to wait for a while or is this something else and what?

  I hope understand you and sorry for the big post.

  Thank you

  Hello

  In my opinion, you need to install Windows XP with all service packs.
  I studied a bit in the internet and found this page useful:
  http://www.HelpWithWindows.com/windowsxp/Troub-13.html

  Also check this Toshiba problem page:
  http://support.Microsoft.com/kb/884020

  I think it is enough to download and install the hotfix updates and everything should work fine.
  Alternatively, you can try to reset the router.

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• I have problems to install Acrobat pro DC.

  Hello

  I have problems to install Acrobat pro DC.

  I get an error message that says: Access violation at address 00000000 read of address 00000000

  I installed a month ago, first and Photoshop and also had a problem with it.

  Then I downloaded the program on another computer and fly over and then it worked to install the program.

  I tried to do the same thing now, but I get the same error message.

  I got a test program installed in a month and decided to buy the program.

  I uninstalled the trial program and downloaded the new program, I received information that it doesn't have the same program because I had chosen to buy a one-time charge.

  What is the DC purchased acrobat or acrobat dc subscription?

  If subscription, are you using cc app (https://creative.adobe.com/products/creative-cloud ) to try and install?

  What os?

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• problem with color efex pro 3 in CS5...

  Hi all

  Sorry for my English

  I have a problem with Color Efex Pro 3, I can not

  If it is usable on my CS5 how do?

  I installed the software in the Photoshop plug-in

  CS5 and nothing

  Help me I am knocked out I finds no solution...

  Thank you all in advance for help you

  We do not control the API - but the code of the plugin runs in our process.

  Plugins are not other applications, they are DLLs with reminders in Photoshop, sharing space with Photoshop.

  If we cannot witn against their bugs with the current plugin architecture.

  If you didn't mind working two orders of magnitude slower with no plugins do not access to as many features of Photoshop, we could put plugins in another process.   Then, of course there are things that we can do - just nothing reasonable, or that visitors and developers would be conditioned with.

  And next time, please do not hesitate to ask questions instead of trying to make a Chair coding.

• Problems with disk Satellite pro 4200 hard assembly

  I have problems with a Satellite pro 4200.
  The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

  CU
  Eltgen

  Hi Eltgen

  Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

  It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

  Hello

  I have a problem with installing esxi 5.5 on SDcard mounted in Cisco UCS B200 m3.

  ESXi Show map SD but when to start partitioning I question (attachment).

  If I install ESXi on HDD I don't see SDcard (even from the console).

  Thanks for any help

  h

  Marcel

  Hello

  Thanks for the reply but SDcard are clear. map of are new directly from Cisco.

  The good news is that I found a solution. I install the old version of ESXi (5.5 U1) and everything works fine

  Concerning

• AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  Bill,

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• Cannot install driver for hp pavilion dv4-2045dx cd player

  Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)

  I currently have problems with my computer's CD drive.  He has been unable to read discs of any kind of music, DVDS and software programs for several months now.  The main problem seems to be with an inability to properly install the driver for the cd drive.

  When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive.  Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer.  I also tried to download all the updates and I get essentially the same message.

  Also, here's all that I've done so far.  I followed all these steps, but the last two listed in the help or support of the site.  Here is the link I used:

  http://support.HP.com/us-en/document/c01897812

  I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday).  In addition, I couldn't do step 8.

  Any help would be greatly appreciated.

  Thank you

  Hello:

  See if ongoing automated microsoft fix tool for you works.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.

  Right to the title of this topic is a "click here to view the solution."

  http://support.Microsoft.com/kb/982116

• Problem of backlight flicking of HP Pavilion dv4-1412tx

  I have a 2 years old Hp Pavilion dv4-1412tx laptop and recently I have a problem with my backlight of the screen. It wobbles a lot and sometimes totally blackoff when I have the screen at certain angles of tilt. It wobbles too much even when I slightly move or shake the laptop. I changed the inverter, but the problem remains. I feel is wrong with the cable/Ribbon that connect the screen on the main body of the laptop. I checked upward with a local computer store and they told me that there is no spare parts for the connector of cable/Ribbon for my particular model. I even made reference interview dv4 guide manual that I downloaded from the hp site and I can't find any references to this particular piece. Is there anyone can help?

  Hi, Benjamin,.

  Yes. I just got my replaced dv4-1412tx LCD cable and it works fine now. It took almost 3 weeks for research technician and wait for the new cable to arrive. The part S/N is DC02000IO00-screen LCD - PA (the characters after 2000 is alphabet 'io' not '10'). You can do a google search and even get it on ebay.

  http://www.eBay.com/Sch/i.html?_nkw=dv4+LCD+cable

  This seems to be a common problem for older models dv4. If you google on the web, you will see a lot of people are facing the same problem. I wish the Hp technical support team can read this message and give appropriate assistance to those in need.

  I hope this info will help. Good luck!

• Problem with HP Officejet Pro 8600 printer - HELP Please!

  Help!

  I installed a new set of cartridges (black and color) in my printer HP Officejet Pro 8600 today and now it won't print a document.  I did everything I knew to do that isn't much.  I even uninstalled and reinstalled the printer without success.  I am a 71 year grandmother, who is working on a project for my grandson.  A kind person out there in cyperspace could you please give me some advice on how to restore my printer?  Thank you! Sharon-

  I'm so bad that down below where I have to select a category, I don't know even what to check, because I don't think my problem apply to one of them.  It's just a problem with a printer.  Will you please excuse anything I check because I do not know and there is no "miscellaneous" category

  Thank you very much for the reply.  After "fiddling around" with the cartridges, uninstalling and reinstalling etc, I finally got to work.

  Thanks again for your response!  I appreciate your time!

  Sharon

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!