2821 PASSWORD RECOVERY DISABLED

Similar Questions

• HP MINI 1000: HP MINI 1000 PASSWORD RECOVERY CNU9150CHZ AND CNU9150BRY

  PLS HELP ME CNU9150BRY AND HP MINI 1000 PASSWORD RECOVERY CNU9150CHZ

  CNU9150CHZ = e9lo3q1ez0

  CNU9150BRY = e9lo3q1pbi

  source > https://dl.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html

  You can then modify or disable in the bios settings, the bios password if necessary.

• Cat6500 Sup1A password recovery problem.

  Dear all,

  I have a nasty problem with password recovery in 6500 Sup1A - 2G.

  I have read very carefully the password recovery procedure,

  http://www.Cisco.com/en/us/products/hw/switches/ps708/products_password_recovery09186a00801349aa.shtml#ouput

  Reset power, with success, get in the console > (Enable), but then I tried to put the new password.

  I get following message:

  Enter the password:

  Console >

  Console > en

  Enter the password:

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:30:09 PDT--07:00 % SYS-5-1 MOD_OK:Module is online

  24 Nov 2012 10:30:09 PDT--07:00 % SYS-5-4 MOD_OK:Module is online

  24 Nov 2012 10:30:09 PDT--07:00 % SYS-5 - MOD_OK:Module 3 is online

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:30:22 PDT - 07:00 % SYS-5 - SUP_IMGSYNC:File synchronization process will start in 10 seconds

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) see the race

  Current TFTP session. Try again later.

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:31:23 PDT - 07:00 % MGMT-5 - SYS_CONFIG_START:System config began with the NVRAM configuration text file

  2012 24 Nov 10:31:24 PDT - 07:00 % SYS-5 - PORT_SSUPOK:Ports on supervisor ensures (module 2) are on the rise

  2012 on 24 Nov 10:31:24 PDT - 07:00 % SYS-3 - MOD_PORTINTFINSYNC:Port for Module 2 synchronization Interface

  2012 on 24 Nov 10:31:24 PDT - 07:00 % MGMT-5-config SYS_CONFIG_END:System finished

  2012 on 24 Nov 10:31:24 PDT - 07:00 % SYS-5-AUTOSAVE: auto-save timer started

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable)

  Console > (enable)

  Console > (enable) 24-Nov-2012 10:31:44 PDT - 07:00 % SYS-5-SUP_IMGSYNCSTART: Active supervisor synchronizes slot0:cat6000 - supk8.8 - 1 - 1.bin

  Console > (enable)

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable)

  Console > (enable)

  Console > (enable)

  I'm in doubt, because my config don't have any string on tftp.

  Could you help me?

  Thanks in advance.

  See the Configuration section below:

  !

  set password

  Set enablepass

  the value of disconnection 0

  set config mode text nvram

  enable auto-save set config mode text

  Set the interval for automatic saving of text config mode 360

  !

  #!

  #vtp

  the value of bms vtp domain

  VTP transparent mode set vlan

  game vtp version 2

  nwzbms name of vlan Set 7 type ethernet mtu 1500 said 100007 active state

  VLAN Set 30 name video_security type ethernet mtu of 1500 said State active 100030

  VLAN Set 31 name novinsky_31 type ethernet mtu of 1500 said State active 100031

  Set VLANs 1002 name fddi-default type fddi mtu 1500 said 101002 active state

  Set vlan 1004 name default fddinet type fddinet mtu 1500 said 101004 active bridge State 0 x 0 stp ieee

  set vlan 1005 trbrf default name type trbrf mtu 4472 101005 State assets bridge 0xf stp ibm

  define the vlan 1

  Set vlan 1003 default name trcrf type trcrf mtu 4472 said 101003 State active parent 1005 ring 0xccc off srb aremaxhop 7 stemaxhop 7 backupcrf mode

  !

  #ip

  set interface sc0 1 192.168.3.65/255.255.255.0 192.168.3.255

  set interface sc1 down

  set ip route 0.0.0.0/0.0.0.0 192.168.3.43

  set the alias default ip 0.0.0.0

  !

  #ntp

  set the timezone PDT - 7 0

  !

  Start #set command

  set boot config-register 0 x 2102

  flash slot0:cat6000 system starter set - supk8.8 - 1 - 1.bin

  !

  # Is the default port enable

  !

  !

  #module 1:2 - port 1000BaseX supervisor

  !

  #module 2:2 - port 1000BaseX supervisor

  !

  03:16 - port Ethernet, 1000BaseX #module

  set the trunk 3/3 on dot1q 1-1005, 1025-4094

  set the trunk 3/8 on dot1q 1-1005, 1025-4094

  !

  4:8 - port Ethernet, 1000BaseX #module

  !

  #module 5 empty

  !

  #module 6 vacuum

  !

  #module 15 empty

  !

  #module 16 empty

  end

  Hello

  You please set the binary model configuration mode (which is the default) then successfully to the "Console > (enable)" invites via the command 'set binary mode config' and then try the recovery procedure of password for the document again.

  Best regards

  Antonin

• SG300 how the cli password recovery

  Hello

  We want to change the password of our switch, but we don't know. We can gain physical access to the console, but he asked to the user and the password?

  We read that you can launch the start menu password recovery service. But, how can we get the boot without the password menu?

  Best regards

  Hello

  In order to reset the password in the start menu, you need to interrupt the boot of the switch process.  Console in and power cycle the switch, you should see the Cisco logo, then you have about two seconds press a key to get the boot menu.  If you miss it (or it expires once your inside) power cycle just the switch again to bring it up again.  The switch in front of me, it is option 3 to reset the password.

  However, it is possible to disabled this option, so if it is not available in the start menu the only way to restore access to the switch will be factory default by pressing the button, rest for 30 seconds.  Then you will need to reconfigure the device, but the default cisco/cisco connection you will get once the switch resets.

  Thanks for choosing Cisco,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Everyone is dismayed to see that there is no password recovery or reset secure put in place for encrypted backups?

  I am absolutely amazed that there is no recovery password for iPhone backups encrypted.

  (1) no password is required to access the iTunes application. He launched and the phone connects automatically.

  (2) someone might maliciously put a password. The password for Mac or device using iTunes OSx need at least before setting the encryption password.

  (3) there is no recovery option. None. Tell me: what password-protected sensitive data have NO option of recovery? No secret questions, no e-mail link, no OSx password, nothing. It's horrible.

  I'm in a situation where I remember not the password, and even if I had the foresight to write it somewhere, that the hard copy has disappeared. I suffer a miserable condition where I lose memory. I have reset passwords on all my stuff course often. That's just my new reality.

  I am faced with a situation where if I ever need to restore my device or upgrade to a new, I won't lose all my old texts and local health data in my applications (which is essential for a person with health problems). The loss of memories of conversations for a person who relies on these devices, precisely because I lose my memory is a slap in the face.

  What the risk of COMPUTER audit team approved this feature, Apple? It's quite incredible that a company of your size would be created people to fail like this. Please post a fix in iTunes for password recovery and substitute it. PLEASE, I BEG YOU.

  N ° if there is a way to recover or reset, the encryption would be completely useless.

  Exercise good security practices on the computer where you have installed iTunes and you will not you care about someone maliciously setting a password for backups.

• Lost administrative password recovery options

  About once a day, I see the same post

  "I lost my administrative password for my computer"

  "I don't remember my password"

  "I need to change the password and I don't remember"

  Without failure, we put the passwords and forget about them and it is not always a simple process to remedy this solution. However, it is a simple process and can easily be avoided. If you read this thread and you have not lost your password to take measures now to protect yourself in case this happens. It will save you time and effort. Always remember, act now to save time tomorrow.

  Retrieve the password using a password reset disk

  This should be your preferred method to reset your password as this is something that you can do and need to do when you settle your account with a password. The password recovery CD must be created before you lost the password to be effective. If you have not already created it and you read this thread to be upward and out with what to do if you are having this issue right now stop and go create this disc.

  Instructions available here

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  Now, if you have the drive and you have lost your password it is very simple.

  1 start the computer and try to enter the password on the Windows login screen

  2. the password is incorrect message opens, and from there, you can select ok

  3. once the screen goes away, a new screen appears with an option to reset the password.

  4. follow the instructions on the screen and use the password reset disk to reset your password

  Change your password to a different user account

  If you have multiple user accounts, and at least one of these other accounts have administrator rights, then you can reset your password from the other account. The password of this account may be necessary, then you can check with the owner of the account.

  1. connect to the other account has administrator rights

  2. click the start ORB, then select the Control Panel

  3. from here, select the accounts of users and parental control

  4. Select Manage another account

  5. click on the account with the forgotten password

  6. click on change password

  7. type a new password and press on enter to confirm

  8. click on change password

  9 disconnect you, then try to log on to the original account

  Return to a previous password

  If you have recently changed your password and now can't remember, you can use the application of Microsoft System Restore to return to a time before you changed the password. This would of course imply remind you which has been the case the previous password.

  To go back and use your old password follow these steps:

  1. press on the F11 key repeatedly to open the HP System Recovery program on the system startup

  2. under, I need help immediately, click the Microsoft System Restore option

  3. follow the instructions to restore the computer to a previous state, choose a time before you changed the password.

  Use a third-party program to attempt to reset / recover password

  HP, like most other companies, do not support the use of third-party applications, but they do exist. If you cannot use one of the options mentioned previous then this is may be the option you want to try.

  Removal and recovery of password programs exist and can be found on the internet through various searches on google.

  One of these programs can be found here http://www.pcloginnow.com/ with instructions on how to use it here http://www.pcloginnow.com/guide.html

  Remember that HP mentioned earlier does not support the use of third-party software to retrieve lost passwords, and then you use this tool or any other tool at your own risk.

  Hope this helps you recover your lost password, or you read and warning and make a recovery for you disk protect.

• System user name and password recovery options

  Hi, looking for help to find my user name and password recovery system, I'm trying to factory reset my laptop, any information will be greatly appreciated, thanks siiinky

  Generally, you don't need to insert any user name or password when you start the recovery process...
  Usually, you must press ENTER to continue.

• RNR4000 password recovery (Readynas 1100) failed using the OS install procedure

  I followed the procedure to perform a password recovery by pressing the reset button while you turn on/off the system. Now the NAS is stuck saying "File System Check" in startup RAIDar. RAIDar shows correct, model host name and the IP address has reset to 192.168.168.168. All road lights are green. How can I recover this system now that it does not start? Should I make a boot USB or boot TFTP?

  What version of the firmware?

  Also note that for the 1100, the default password is netgear1 if running RAIDiator 4.x or so in running RAIDiator 3.x it is infrant1

• Virus recovery disable MEMU cascaded to all my programs in all programs.

  Virus recovery disable MEMU cascaded to all my programs. I'm thinking how to turn all the program, so I can see them again but I need to find the place where to turn all the links of programs, starting the programs, some can tell me where the key registetion to do.

  I disassembled the virus the one I had seems to be a version upgrade because I the steps I found to remove it would not work. same virus programs could not remove a lot of it and fix it.

  Apparently, the hard drive is wipe out but it's not. The virus turn most of the off visual interface on the desktop, so you can see. but it still everything you need to know which regester key values to change and they need to change too!

  The entire program antivirus don't happen that their return on what I found. They clean it up but your left with trying to fix the rest of the problem. Biggest problem for me, is that the top of the Tower has not yet saved.

  Thanks for your help, but I found the answer to my problem here.

  http://am-TechZone.blogspot.com/2011/07/all-programs-shortcuts-are-removed.html

  It shows you the registry keys, you need to delete and copy the file had to be back in the right places.

• I need your help - account password recovery

  Dear Microsoft,

  I didn't sing in email * E-mail address is removed from the privacy * but I can't the recovery email. Please help me account Password Recovery Ref.

  Account Password Recovery - * address email is removed from the privacy *.

  Last post: TempUser A6E8F21A-E13F-4FE9-87A3-22B322D5184C, Thursday, June 9, 2011 11:39

  Subscribe via RSS

  Thursday, June 9, 2011 11:39

  Utilisateurtemp A6E8F21A-E13F-4FE9-87A3-22B322D5184C

  Thank you

  Saravoot

  Submit all Live and Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Compaq mini CNU0022G2C: bios password recovery

  Pls I need help my compaq mini password recovery

  Hello

  Enter: e9l1177h7e (3rd character is a lowercase L)

  Kind regards

  DP - K

• Windows Live account password recovery.

  Original title: password recovery.

  If any of you have had or have the same problem as me, could you pls tell me how long

  You need your old p/w which is sent to you via Windows Live. I hope soon. I changed my p/w, one too many times, and he got me in trouble. Now, I can't ' do not forget my p/w. If one of you had the same problem I have at the present time could you pls tell me how long it will take Windows to respond. So, your answers would be very greatly appreciated.

  Hi Marly1956,

  I recommend you post your question in Windows Live Solution Center for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ZIP RAR ACE password recovery program

  I found the ZIP RAR ACE password recovery program on my computer. Is it safe? Do I need?

  Hello

  ZIP RAR ACE Password Recovery is a program to recover passwords lost or forgotten files of the following types: ZIP, RAR (including v3.x, v4.x SFX, a work in several volumes and archives with encrypted filenames) and ACE archives.

  If you have installed a publicly traded software then ZIP RAR ACE can help you recover the forgotten password.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• My computer can be unlocked if I forgot the user password and have not configured a password recovery disk

  I forgot my user password on my computer. I have not configured a password recovery disk. Can it be unlocked and how?

  I forgot my user password on my computer. I have not configured a password recovery disk. Can it be unlocked and how?

  See if this tutorial Microsoft Support will help:

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765
   
  If she does not she, MS Answers leave no one helping users to bypass the password protection... Regardless of the reasons.
  Here is the link to the policy:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Recover password and disable parental control

  I set up parental controls, but I want to turn it off. the problem is that I forgot my password. How can I recover my password and disable parental control?

  I set up parental controls, but I want to turn it off. the problem is that I forgot my password. How can I recover my password and disable parental control?

  We are not authorized to assists users bypass the password protection. Regardless of the reasons.

  Here is the link to the forum password privacy policy

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37