2851 used for the access server?

Similar Questions

• Applications of freeze for 2 to 30 seconds when the access server via RDP

  Symptom: a server running a mission critical real-time console applications work fine left unattended.

  When internet connections are stable, and admin connects to the server using the RDP Protocol, yet everything very well.

  However, sometimes the connection to the server degrades and shows of packet losses. In this case, RDP has always managed to connect, but all our applications on the server to freeze for a period of 2 to 30 seconds.

  While gel applications, the windows user interface is still usable (File Explorer, to change the active window, etc.). The updating of the display is slower, but what is expected with a suboptimal internet connection.

  Log files from various applications show that frost occurs at the exact moment in all of our applications.

  This effect occurs often, just at the moment where the connection to the server. This happens sometimes after some time, while the RDP session is in place, but the user does not interact with the keyboard and mouse.

  Repeated tests have shown, that at the time where we experience these connection problems from another machine in the world, who have own internet connection to the server, a gel occur.

  Because these freezes cause our entire production system one malfunction, this makes the administration remotely via RDP essentially impossible.

  The server is Windows 2008R2 SP1.

  Applications that freeze do NOT networking outside the local computer. Most of the applications are simple console applications.

  I have google some references to this or similar problems, however none of the effective resolutions.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Help generate the SSL certificate for the Security Server

  Hi people,

  We have server (ss - 01.mydomain.local) security and connection server (cs - 01.mydomain.local). Now intend to install a certificate on the Security server. What should be the common name.

  our Web site is something like access.mydomain.local.

  Also, we plan to install SSL only on security for internet access server, this will affect the internal users, access to the connection to the server.

  Thanks and greetings

  J P Raj

  Take a look at the link below

  https://pubs.VMware.com/horizon-view-60/topic/com.VMware.ICbase/PDF/horizon-view-60-scenarios-SSL-certificates.PDF

  Internal users will not be affected when you install the Security server certificates

  Simply create a CSr file > get certificates and import them to the Security server in the MMC guide explains practically everything. If you already have certificates wildcard certificates, then you can follow the sub process

  (a) export the server certificates

  (1) to connect to the server that has certificates

  (2) for this server to export it to a PFX format certificate.

  (3) open the Microsoft MMC Certificates snap-in for the computer account.

  4) navigate to certificates (Local computer) > personal > certificates.

  (5) right-click on the signed certificate that is to be exported.

  6) click all tasks > export.

  (7) on the Welcome screen, click Next.

  8) click Yes, export the private key.

  (9) if it is an option, click on include all certificates in the certification path.

  (10) enter a password for the private key. This is required for the import certificates.

  (11) to enter a file name and location. For example, C:\certificates\certificate.pfx.

  12) click Next.

  13) click Finish.

  b) import it to the use of broker or planned connection securityr.

  Certificates of thye 1) import (preferable Pfx format) for the server broker or planned connection security.

  (2) open the Microsoft MMC Certificates snap-in for the computer account.

  3) navigate to certificates (Local computer) > personal > certificates.

  (4) right-click the certificates.

  5) click on Import.

  (6) through the pfx and click Next.

  (7) enter the certificate password.

  (8) select Mark keys as being exportable.

  9) click Next.

  10) click Finish.

  (c) restart Consulting Services

  To restart the services:

  Log in as an administrator on the server that is running the Server VMware View connection server VMware View connection or VMware View Server Security.

  Click Start > run, type services.msc and press ENTER.

  In the list of services, right-click on the VMware View connection Server or VMware View Server Security service.

  Click on restart and wait for service to stop and start.

• Liquid markup - how to use (for the rest of us)?

  I read a lot of things in the developer section BC liquid. Clearly for the programmers out there, it's like plain English what she gets. However, for the rest of us, designers and our customers, there are large gaps in the way it is presented. It assumes that we have a basic understanding of the functions on the server side and on the side of customer calls. I would say it seems intense collaboration between the province of British Colombia and the "expert" group of advisers in the liquid application with BC is ahead of the rest of the customers of BC scratching their heads.

  What seems to be missing is the step by step guides that BC developed for its previous syntax, with examples for each module, even examples of HTML work. And does not suggest that it subscribes to a course of Liquid by a third party. BC made the changes, and I'm expecting BC to provide the best documentation, guides, and tutorials.

  For example, after reading and re-reading the liquid documentation BC (for developers) I googled liquid to see if anyone had made any sense it to '' the rest of us. '' I came across a tutorial (Infinite business catalyst product detail Layouts |) Joe Watkins | Adobe Business Catalyst tutorials - tips & tricks) which explained mustache (a solution javascript much debated and turned in derision by some people in this forum; although debate reads like a pretty eyes and devoid of logic for "the rest of us"). Now before you say that moustache is not the same thing, etc. client-side's point was that it was EASY to understand. BC seems to have forgotten the "rest of us" in his excitement.

  BC seems to have become more complex than ever, creating a wide gap between those who are experienced programmers and customers who wanted a simple CMS to manage their Web site. I am sure that liquid offers brilliant functional solutions, but it can be difficult to access without understanding how to use it.

  However, attractive interface and functionality of Squarespace we makes you wonder what is happening on Earth at BC. You can all you like to argue about the technology behind Squarespace, but it totally works on BC in the way in which it is marketed, presented and used by the very market that BC is intended.

  I hope that BC, with the release of liquid, at least with a "how to use (for the rest of us).

  I can't help to wonder if the redevelopment of Colombia-British got hijacked by the developers, when he should have been hijacked by marketing initially.

  Hey Simon,

  Its a templating language and the programming language basic, must never anything the customer needs to see, touch or concern. We have been running the stuff of bedbugs in brass on the liquid for a few months and I know the sandpile a running as well things - I think that say there are a lot of people happy and I have not seen a case of head scratching total with everyone. Some people of course, but you must also be aware that liquid is not final, it isn't here for all sites and developers forum is above all the work to ensure that it has the features he needs, his work at 100% and ready for prime time. With this documentation is largely up to date in many areas and guides etc will.

  You have all these:

  Developers

  And the ready reference information and existing code snippets in - the Developer Reference

  But like I said, its not direct things yet if are still ongoing, evolving and updated.

  In terms of saying moustache - it is pretty much the same language in many ways - much the creation of models of language are.

  In terms of BC - they tried the simple way, they went with Muse, they did more with the ice, the more simple things - BC has not progressed and lost big BC partners etc. Dreamweaver saw what he removed from the main application and so on. BC needs to move forward and this is the real way forward, must pick up digital agencies, many sites of coherent long-term based on the platform so that it can develop. Of course, Squarespace has a nice interface in version 7, but have you used? VERY limiting, your will not build sites Web tailored to your customers that meet the needs of their online business can grow.

  But yes, what your ask Simon, is already past and you have to remember the liquid is NOT yet final.

• variable binding can be used for the table in an explicit cursor

  I have an application that accesses a table on several different servers. I created a ref for the slider cursor variable and a varchar2 variable to define my query. variable I_server is a parameter to my procedure. Is it possible to rewrite the v_query using bind variable for the table/Server? I have included below v_query.
  
  v_query: = "SELECT rp.usr_id, rp.sun_sft_cat, rp.sun_start, rp.sun_hrs," |
  "rp.mon_sft_cat, rp.mon_start, rp.mon_hrs, |
  "rp.tue_sft_cat, rp.tue_start, rp.tue_hrs, |
  "rp.wed_sft_cat, rp.wed_start, rp.wed_hrs, |
  "rp.thu_sft_cat, rp.thu_start, rp.thu_hrs, |
  "rp.fri_sft_cat, rp.fri_start, rp.fri_hrs, |
  "rp.sat_sft_cat, rp.sat_start, rp.sat_hrs, |
  "rp.sun_sft, rp.mon_sft, rp.tue_sft, rp.wed_sft, |
  "rp.thu_sft, rp.fri_sft, rp.sat_sft, nvl (ei.wip_permanent_sched_seq, 0) ' |
  'FROM ' | I_server | "rp, wip_emp_information ei, |
  'wes, wip_emp_status_type West wip_emp_status' |
  "WHERE rp.usr_id = ei.employee_id' |"
  "AND wes.employee_id = ei.employee_id' |"
  "AND wes.status_type = west.status_type' |"
  "AND west.description =" STOREKEEPER "' |"
  "AND wes.effective_date = (SELECT MAX (wes2.effective_date)' |)"
  "OF wip_emp_status EMTE.2 |
  "WHERE wes2.status_type = wes.status_type' |"
  "AND wes2.employee_id = wes.employee_id' |"
  (' AND wes2.effective_date < = trunc (SYSDATE))' |
  "AND wes.status = rp.wk AND"Y"= 1'; -wk = 1 is the schedule for next week
  
  Rp_sched_cursor OPEN FOR v_query;

  If your intention is to do this:

  v_query := 'SELECT rp.usr_id, rp.sun_sft_cat, rp.sun_start, rp.sun_hrs,' ||
  ' rp.mon_sft_cat, rp.mon_start, rp.mon_hrs,' ||
  ' rp.tue_sft_cat, rp.tue_start, rp.tue_hrs,' ||
  ' rp.wed_sft_cat, rp.wed_start, rp.wed_hrs,' ||
  ' rp.thu_sft_cat, rp.thu_start, rp.thu_hrs,' ||
  ' rp.fri_sft_cat, rp.fri_start, rp.fri_hrs,' ||
  ' rp.sat_sft_cat, rp.sat_start, rp.sat_hrs,' ||
  ' rp.sun_sft, rp.mon_sft, rp.tue_sft, rp.wed_sft,' ||
  ' rp.thu_sft, rp.fri_sft, rp.sat_sft, nvl(ei.wip_permanent_sched_seq, 0)' ||
  ' FROM ' || :b0 || ' rp, wip_emp_information ei,' ||      --- Note the bindvariable...
  ' wip_emp_status wes, wip_emp_status_type west ' ||
  ' WHERE rp.usr_id = ei.employee_id' ||
  ' AND wes.employee_id = ei.employee_id' ||
  ' AND wes.status_type = west.status_type' ||
  ' AND west.description = ''WAREHOUSE EMPLOYEE''' ||
  ' AND wes.effective_date = (SELECT MAX(wes2.effective_date)' ||
  ' FROM wip_emp_status wes2' ||
  ' WHERE wes2.status_type = wes.status_type' ||
  ' AND wes2.employee_id = wes.employee_id' ||
  ' AND wes2.effective_date <= trunc(SYSDATE))' ||
  ' AND wes.status = ''Y'' AND rp.wk = 1'; -- wk = 1 is next week's schedule
  
  OPEN rp_sched_cursor FOR v_query USING i_server;
  

  So the answer is: no, you can do that.

  But then, my question would be: why would you do that?
  I guess that you have many "different servers. A cursor on the server will not hurt you.

• for the application server control console

  Hi all
  
  OS: OUL5 x 64
  EBS R12 12.0.6
  
  In the readme file of patch 7272722 session
  
  5.1.2 apply Oracle Application Server 10g Release 3 (10.1.3) Patch Set 4
  (10.1.3.4.0)
  The following procedure describes how to apply the set of patches:
  1. If you are applying to a 10 g 10 g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0)
  Module 3 (10.1.3.0.0) Oracle home and your system uses Enterprise Javabeans
  3.0 applications, then you must undeploy your applications before you apply
  the patch.
  
  
  The following procedure describes how to cancel the deployment of the applications:
  one.
  
  Connect to the Console of the Application Server under the same user name command
  than the one used for the original installation. If the application is deployed
  to a specific instance of OC4J, and then access the OC4J home page for the
  See also: "Introduction to Backup and Recovery" in the Oracle
  Administrator's Guide on the server application for more information
  on Oracle Application Server backup and restore.
  
  Question:
  
  How can I check if my application uses of EJB?
  How to connect to the application server control console to run the task above.
  My ebs url: http://prod.xxxx.com:8010
  
  Thanks in advance.
  Tom

  Tom,

  -How will I know if EBS r12 12.0.6 using the EJB or not?

  In my view, it is not applicable to the installation of R12, you can omit this step. If you have a stand-alone server Oracle AS10g and you must apply this hotfix, you must then check if the EJB is used or not.

  Kind regards
  Hussein

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• WRT54G v8.2 static IP for the internet server help please

  I'm having an argument with my ISP.

  I have a WRT54G, blah blah DSL 5 MB and I want to have one of my computer that is accessible from the internet. The rest can stay on the DCHP intranet.

  My ISP insists that, for this I need as a static IP address on their part. They offer only the ip static or dynamic, a service or the other, and I can set up with an IP address static both my router and my machine I want to be able to access on the internet.

  Seems to me that I need TWO static IP. One for the router and the other entitled it the internet service computer.

  Can someone please give me feedback on this? A lot of satisfaction.

  Jeff

  Topic 1. If the router support: Yes. Otherwise, configure a static IP address directly on the computer.

  Re 2. Yes.

  Re 3. Yes.

  Re 4. Yes.

  It's pretty simple. Unfortunately, some Linksys routers have problems of transmission port 80 because this port is used for the web interface. It may be necessary to use a port other than 80.

• Error code 64 c for update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Have tried to install KB2494113 - update of safety and he constantly fails to install. Help please as I know very little about the "intricacies" of my laptop

  Hi Phillipmuir,

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the following link and try to download and install the standalone update package:

  Update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Hope this information is useful.

• Need a SMTP service for the web server running Windows 7 Professional SP1

  The remote server administration tools package seems to work only for the management of Windows 2008. I have a web server running on Windows 7 and want to integrate the messaging service. IIS 7.5/7.0 does not include this feature. Now that are remote server administration tools installed, I tried to use the feature of IIS 6.0, however, a message is displayed to indicate that I don't have the SMTP service is installed. I checked the 'Server' SMTP under functionality after installing IIS 6.0 from the admin of remote server Pack. This does not install the feature. Could someone give information on how I can install email/mail service or function to use with my domain name on Windows 7 Professional SP1? Thank you.

  Microsoft recently released an update for the Remote Server Administration tools work with domain controllers running Windows Server 2008 R2 SP1.

  You can download it at the following link:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7d2f6ad7-656b-4313-A005-4e344e43997d

  For further assistance, please post in the following forum:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Where to put the report server ip and port for the Siebel server?

  Hello

  Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.

  Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.

  Please help, thanks.

  Hello

  Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.

  Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.

  Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.

  I hope this helps.

  Thank you
  Maria

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• Java for the secondary server of Iaas

  By using the Installation Wizard, why doesn't the spell prereq check java for the secondary server to Iaas? What is the purpose of the java is used?

  • Secondary server of Iaas (inf-1)

  

  • Iaas (inf-2) backend

  

  • Server roles

  

  Kind regards

  Hello

  Yes you are right, and referring to the document correct when it come to the installation of JRE to vRA is a sine qua non for IaaS, so as it can support the deployment of MS SQL, so we need to install java on the machine hosting the web component rather than the external machine working with MS SQL.

  Rgds

  Frédéric

• JRF extension is available for the SOA server?

  Hello

  We want to deploy an ADF based on SOA managed server, I understand that ADF requires Java Runtime Files (JRF) extension.

  This extension is available for the SOA server? I am aware that it is available for weblogic server, but we will not use the weblogic server, we will be deploying on SOA managed server?

  Thank you

  Two misconceptoons here:

  1. the COMMON declaration form files are not installed on default WLS, they must be installed. For example, the Runtime of Development Framework Applicetion. The COMMON declaration form files are included in any Oracle product installation that uses (eg. Enterprise Manager Fusion Middleware control).

  2 SOA server is usually called SOA suite and running on WLS. More SOA includes the JRF.

  Hope this helps,

  -olaf