2950 PE + HDD MD1000 guasto [MS]

Similar Questions

• Server HDD su guasto PE 2950 [CF]

  Buongiorno,

  Sul Server abbiamo following a guasto HDD:

  Dell PowerEdge 2950
  Service etiquette: CYFSQ3J
  service code: 28203772447

  He disco e a Hitachi SAS 15 K RPM da 450 GB della configurazione del server original

  Few need della quotazione by United Nations equivalent disco da auswechseln.

  Urgent enough.

  Grazie.

  Speaking saluti

  Massimo Raselli

  Obicon Srl

  Tel. + 39 029609324

  Buongiorno, the sto contattando by mail.

• PowerEdge 2950 price HDD [MS]

  Buongiorno, siamo di fans a PowerEdge 2950 number di matricola Server. Abbiamo need di acquistare n ° 6 disc HARD Dell Codice Prodotto 59 14 P e vorremmo sapere to sono gia lines delle slitte o be dobbiamo comprarle o. Grazie.

  It kit e provvisto di alloggiamento slitte delle.

  Speaking saluti

  Manual

• PowerVault MD3000i - HDD Guasto [DS]

  Buongiorno,

  If line gentilmente sostituzione di a guasto 600Go SAS 6Gbps 15 k 3.5 "HDD

  PowerVault MD3000i NAS - disco fans parte di a RAID 5 for the fault.

  Macchina fuori co.

  5s information by intervento fuori co.

  Grazie.

  Dear client,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi UN privato con message it Service Tag del MD

  Nel caso in cui as aver need di assistenza telefonica is Pagaré a ticket di Assistenza.

  SE if need di una delle quotazione left in sostituzione can rates UN preventivo senza Pagaré the assistenza.

  By request, we have our o di need any it client codice di vecchia quotazione o.

  Nel caso in cui non his di queste information times need che compilasse i seguenti campi:

  By the spedizione:

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione (is different)

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

  Domenico Severino

• SATA HDD via SATA_A or SATA_B on Power edge 2950

  We use a power edge 2950 server in our lab with 32 bit Linux (Ubuntu LTS 10.03).  4x250GB SAS hard drives via (3 of them are RAID5 and 1 is for backup).  And also a 3 (single partition) external HARD drive to use for the collection of data via USB.

  I tried to connected external HARD disk to the SATA_A internal port. I did the BIOS setup (it is updated) the system recognized the disc as 3000 MB. But even the BIOS and the operating system (by fdisk) is recognized the HARD drive, I couldn't reach the files.

  What could be the problem? Here are the possibilities that according to me:

  (1) I can't use SATA_A or SATA_B ports to connect a HARD drive

  (2) there is a > 2 TB disk situation. (but I can use it via USB 2.0)

  (3) in view of the LINUX version (but I can reuse it via USB 2.0)

  4) there is a problem of partition type (thing 512 and 4096 bit)

  What are the answers?

  Is there a solution to connect the drive HARD 3 to (or ability of the lover) to use a faster speed?

  Can I use a usb 3.0 PCI exp card?

  Hello

  If the drive is recognized in the BIOS, then it is a software problem. There is probably a problem of compatibility with the driver in Ubuntu, or there might be a problem with the file system.

  Make sure that the file system is supported by the operating system. I would recommend starting a RHEL or CentOS live CD/DVD to test the functionality. If the drive works very well in one of these BONES, then this is a problem of driver on Ubuntu.

  Thank you

• PowerEdge 2950 HDD Predictive Failure

  Hi Experts

  We have PowerEdge 2950 with 5 RAID PERC 6 / i integrated. It has 3 hard drives SAS and is to show the Predictive Failure HARD drive for two SAS drives and each HARD drive is 400 GB. The same size disk is not available now and the seller asks us to use 450 GB HARD drive. Is it possible or we should insist on getting 400 GB SAS HARD drive?

  Concerning

  It will work, but there are some risks involved.  Here is a good post on spiceworks where few people are talking about possible problems.

  http://community.Spiceworks.com/topic/275664-mixing-10K-and-15K-rpm-speed-disks-in-servers

• Replacement of the HDD RAID5 2950

  Hello

  We have a disk failure in a RAID 5 system in PowerEdge 2950 with card RAID Perc 6i. Drive HARD original is WD SATA 7200 rpm 1 TB.

  Given that Dell sells more the original model of HARD drive, the commercial attaché Dell sold a compatible HARD drive, probably not of WD. Although it will rebuild the RAID, she said, I still want to double check here. Can we use this compatible HARD drive to rebuild the RAID without data loss? Dell ensures that replace drive HARD has the same number of cylinders, sectors, etc.? Or is it not important?

  We have simply to stop the server, swap on the defective HARD drive, turn it on and configure BIOS to rebuild the RAID5?

  Thank you very much for the review of my question!

  -Andrew

  Dell uses - and you - will send a "certified" for a replacement drive.  "Certified" made sure readers, regardless of the make and model, will work well with other certified drives and controllers from Dell.

  NEVER stop a server to replace a hot drive... If it's hot-swap, hot swap.  If the replacement does not rebuild automatically, then you can assign it as a hot spare.  This can be done in the operating system using the OpenManage software.

• FATA HDD on PowerEdge 2950. Will it work?

  I'll buy some servers dell poweredge 2950. I know that they take over the discs hard sata/sas. I found some hard disks on ebay. im sure they are connectors of fata. Here is a link to them http://www.ebay.com/itm/300867851220?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

  Will this work on the PE 2950? I need to know before you buy hard drives. or if I buy them.

  No, fiber channel disks will NOT work. Of business or you SATA drives need to SAS.

• 2950 HDD D80A Firmware Update for the dedicated hot spares

  I have a 2950 III with 8 Fujitsu 146 GB drives installed in a RAID 10 array. The first six discs are configured for use in a virtual disk with the last two records configured to be used as a dedicated hot spare. OMSA describes the version of the firmware of these two disks 0102. I ran the update of the firmware as described here:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-2950?driverId=F50fd

  The six drives in the virtual disk just successfully upgraded to the version of the firmware D80A. Two rescue disks have not been tempted. I tried to run the Setup again and Setup note that installed and packaged versions are both D80A, but OMSA said that two rescue disks are always at 0102.

  This is expected behavior? Spare disks are treated differently? If so, the firmware update as they are now or have I trade in the virtual disk to do the upgrade?

  The link does not work for me earlier... it's working now.  There is also a utility 'nautilus' which can be used on Dell readers... it will update all readers of Dell, regardless of the make and model... preventing you from having to download a dozen different services.

  Yes, that is why the update is a failure: Dell firmware cannot be updated with the firmware of the sale to the retail/credits, and retail/Generic firmware cannot be updated with the Dell firmware.

• PowerEdge 2950 after about 2 HDD it won't let me put more at the!

  So I try to install more than 1 HARD drive in the server, but it will no longer accept the 2 then, I tried partition and several programs, scanned, ect... But no matter what he always tells me he has 99 Mb of storage, which is not true. It's their whole, that I do not?

  Windows should not see the disk at all if it is configured in a RAID of the controller.  CTRL-r, the blink works on the PD MGMT screen - you can not set it up in a RAID of this form - you need to configure from the VD MGMT screen (highlight controller, F2, Create/New).  If the drive status is anything other than 'willing' to the PD MGMT screen, you will not be able to set it up.

• PowerEdge 2950 PERC 6 / i RAID 5 REBUILD OMSA / HDD FOREIGN END

  Hello Dell and world,

  Currently I have a PERC 6 / i on PE2950 with a HARD drive failed and replaced with HARD drive that comes as FOREIGN [the drive arrived as new and I want to erase to use reconstructed RAID5]

  Here are the links for the DELL OMSA screenshots with displayed questions:

  Pic1: [IMG] http://i60.tinypic.com/16h7tbo.jpg [line]

  NOTE2: [IMG] http://i61.tinypic.com/xdfjfr.jpg [line]

  PIC3: [IMG] http://i57.tinypic.com/6px57b.jpg [line]

  PIC4: [IMG] http://i62.tinypic.com/2e2gn78.jpg [line]

  Will you please review the images provided and let me know what would be the best step to address this issue. Thank you!

  -Hiphoptech

  You must clear the foreign configuration.  Go to storage, PERC, Information/Configuration (link at the top of the page), then foreign/Clear in the menu tasks available for the controller.  Then you can assign the drive as a hot spare to start reconstruction.

• 1 HARD rotto su ST31000640SS MD1000 disk

  Buongiorno

  Ho need di UN preventivo per 1 HDD rotto by una DAS MD1000.

  ST31000640SS 1000Gbytes HARD drive

  In attesa saluto per I have imie saluti.

  Maurizio.

  Buongiorno, the sto contattando by mail.

• DELL PowerEdge 2950 PERC 5 / i

  Dear members,

  I have server Dell PowerEdge 2950, I need to install Windows 2003 Standard Edition and save it as a file server for my network.

  So I bought 2 TB SATA WD HDD, I would like to create RAID 1.

  As a trial, I connected two 145 GB SAS and a 2 TB SATA Bay and switch ON create RAID1.

  Please guide me how to create RAID 1 using PERC 5 / i utility of configuration?

  My version 5 PERC / i integrated 5.0.2.0003.

  Thank you

  Tony

  You cannot mix SAS and SATA drives in a RAID array.

• MD1000 unified Mode and 2 Active Directory servers

  Hi all, I'm no expert with the servers, but I get by well enough.

  I currently have 2 identical servers poweredge 2950

  One is a server to the server's active directory master windows 2012 and the other is the same, but the slave of the mirror.

  I have a Powervault MD1000 connected to the master ActiveDirectory controller, but I thought to myself, not to award good people being able to connect on the backup to secondary, they cannot access the md1000 where all their files.

  Then question, I currently have the MD1000 unified mode. Is it possible to connect the other server until the other side or anywhere elsewhere that it is also showing on the slave?

  That way if the PDC goes down, people can still connect and access their files on the MD1000.

  I hope that all the senses.

  If not, does anyone have a suggestion for how they would accomplish this?

  This is not an option with a MD1000. Do you need raid controllers that communicate with eachother, that is not an option with the PERC5E/6th/800/810.

  Shared storage that you have in mind requires specific hardware and some software.

  For hardware, you would need a SAN as a MD3000 and could then set the MD1000 to the MD3000 (this assumes you have Dell certified discs (the MD1000 does not require this, but the MD3000 does)).

  With regard to the software; you would have to set up a cluster, which should really be done with ad servers (but the servers need to be joined to an ad).

• (Redirected) poweredge 2950 change all readers while keeping the BONES

  I have a poweredge server 2950 with 5 x 145GB sata HDD and installed a windows 2008 R2, and I SAS 6 x 2 TB hard drives which I bought to upgrade all the hard drives on the server, how can I do that without losing the BONE? I'm new on the environment and I would be grateful to give me advice and measures on this matter, thank you very much.

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.