2nd Z600 CPU installation

I have a HP Z600 workstation with 1 x E5570 cpu.

Can I install a 2nd type processor x 5570 on the motherboard?

What is the difference between E5570 and X 5570, and if so, which is best?

Thank you

Caspian Sea

The Z600 features of two processor on the motherboard ready to go, as with the xw6400 and the xw6600. So, it is much easier and cheaper to add a second processor for the Z600 for a Z620 which requires a 'minimotherboard' separated to add to the top of the main motherboard before you can add a second processor.

Here is information on the naming conventions names to the processors, to the low position for E vs X:

/T5/workstations-z-series-XW-series/Z600-CPU-upgrade/m-p/6649124/highlight/true#M18367

I saw the HP list some X processors as an E processor when Intel and the rest of the world as a x lists... follow the convention of Intel and the surefire way to know exactly what processor you have is to take off the heat, remove the Processor heatsink, clean it and check its code sSpec laser engraved on the top of the processor stainless steel cover. You must at least be comfortable with this process before thinking to add a second processor. Dough thermal costs for both is useful if you have two processors.

Note the orientation of the processor before carefully remove you it... There is a corner triangular gold on it which is oriented to a corner of the plastic of the decision threshold, and you can see that, after that you turn to the top of the stainless steel on its hinge fixing. After you have added the thermal paste very carefully put the processor down on delicate pins with it's interface. I hold the processors North-South, not East-West... with North being the hinge of the hold down. In lots of light here and note that tasks molded into the plastic of the socket to align with the edge of processor corresponding to tasks... together down gently, then check alignment, then close the hold down.

X 5570 has a single code sSpec, SLBF3, and that should be easy to find. It's a max 95W TDP processor and you can buy new Intel for about $1400.00 USD today. Or, for about $35,00 or even a little less off eBay. I only buy used Xeons and had a bad on about 50, and the seller has sent a replacement free of charge.

You want to match a heatsink / fan new / used eBay for what you have, and the part number will be on the radiator you have. I recommend to use Noctua thermal paste, and only a nice little dab is needed to get a good thin layer on top in stainless steel before replacement and reassembly. I extend it with a finger gloved latex in a circualr motion to cover the flat top surface, where was the laser engraving. You want pretty thin... not so thin that they are able to see through, but close to that. You screw the radiator on sequentially across, opposing live a few laps at a time, until they just gently... the bottom but do not turn the handle downwards beyond. It is fine to do walks back and gently bottem them again to get all too tight 4.

Upgrade to the latest version of the BIOS first, and only a reboot may be necessary to work with the new processor. The latest version of the BIOS gives you the last HP "microcode", a hidden part of some updates to the BIOS, and which includes the list of specific processors that HP has certified to work with your particular workstation. For example, you might see a processor that works in your computer in one of the QuickSpecs, but if you do not list your BIOS firmware, it won't work. I do not think that HP ever pulls a processor from the list of firmware when it moves forward with a workstation... compatible motherboards X56xx should be able to run all X55xx older processors.

Partners, it is important to know that there are two main versions of the Z600, with the latest version capable of running with some processors than the earlier version cannot. By combining your second processor to exactly what you already have you don't need to think about this question, but if you want faster dual processor completely new, you will need to do more research in this forum about the revisions, which will be held with the two main motherboard reviews and the fact that you can use "performance" heat sinks if you go with the processors the "." more hot.

The last QuickSpec for the Z600 (v51) covers X56xx and processors E56xx... QuickSpec is for the new revision of the motherboard. You can search in the HP to find their searchable list of all prior QuickSpecs and see which processors have been certified for your motherboard probably original review. Based on this research, you can choose to move to two correspondents faster 95W X55xx Xeons, but only get those who are in the list QuickSpec from HP (and get the latest not if there are several codes sSpec) for everything what install you on.

Searchable QuickSpecs for Z600:

Later and probably the last, is v51. The PDF link get you more later. The HTML link offers you the most recent, but also a drop-down list in the upper right to use to go back in time:

http://WWW8.HP.com/h20195/v2/GetHtml.aspx?DocName=c04110961&search=Z600

From there, you can create a chart on all previous processors available and choose what you want. I recommend doing a chart for only the fastest and the second more fast X55xx processors in each QuickSpec and check eBay for the price. A step down from the fastest often gets you a large drop of cost. If you do this work, please report it here to help others.

Tags: HP Desktops

Similar Questions

Update, Z600 CPU

I have the following HP Z600 and I want to upgrade to the current Intel Xeon E5520 processor to E5650, E5660 or X 5675 processors. The two basic questions I have are:
- Is this possible?
- If so, what exactly should I do?
Implicit in these two questions are:
- The chipsets on the motherboard will build the latest processors?
- Current heatsinks for E5520 processors will work or it will be necessary to replace them?
Thank you

Bob

-------------------------------------------------------------

Computer
Model: HP Z600 Workstation 103C_53335X
Serial number: 2UA01 *.
Chassis: HP Mini Tower
Motherboard: HP 0AE8h
Serial number: 2UA01 *.
BIOS: HP 786 4 v03.54 02/11/2011
NUMA support: 2 unit (s)
Total memory: 24GB ECC DDR3 DIMM

Processors
Processor: Intel Xeon E5520 CPU @ 2.27 GHz (4 c 2.4GHz/2.53GHz, 2.13 GHz BMI, 4 x 256 KB L2, L3 8 MB)
Processor: Intel Xeon E5520 CPU @ 2.27 GHz (4 c 2.4GHz/2.53GHz, 2.13 GHz BMI, 4 x 256 KB L2, L3 8 MB)
Socket/Slot: CF LGA1366

Chipset
Memory controller: HP i / 5520 (Tylersburg - 36 d) Hub 2 x 2.93 GHz (5.85 GHz)
Memory controller: HP Xeon (Nehalem) UnCore 2 x 2.93 GHz (5.85 GHz), 4 GB ECC DIMM DDR3 192-bit 1 GHz 3 x
Memory controller: HP Xeon (Nehalem) UnCore 2 x 2.93 GHz (5.85 GHz), 4 GB ECC DIMM DDR3 192-bit 1 GHz 3 x

Bars of memory
Memory module: Freescale (Motorola) 18KSF51272AZ-1G6K1 4GB DIMM DDR3 PC3 - 12800U DDR3 - 1600
Memory module: Freescale (Motorola) 18KSF51272AZ-1G6K1 4GB DIMM DDR3 PC3 - 12800U DDR3 - 1600
Memory module: Freescale (Motorola) 18KSF51272AZ-1G6K1 4GB DIMM DDR3 PC3 - 12800U DDR3 - 1600
Memory module: Freescale (Motorola) 18KSF51272AZ-1G6K1 4GB DIMM DDR3 PC3 - 12800U DDR3 - 1600
Memory module: Freescale (Motorola) 18KSF51272AZ-1G6K1 4GB DIMM DDR3 PC3 - 12800U DDR3 - 1600
Memory module: Freescale (Motorola) 18KSF51272AZ-1G6K1 4GB DIMM DDR3 PC3 - 12800U DDR3 - 1600

Graphics card: ASUS R9 270 X Series (20CU 1280SP SM5.0 1.12 GHz, 4 GB of memory DDR5 5.6 GHz 384 bit PCIe 3.00 x 16)

Graphics processor
Processor OpenCL GP: R9 ASUS 270 X Series (1280SP 20 c 1.12 GHz, 3 GB of memory DDR5 5.6 GHz 256-bit)
Compute Shader Processor: ASUS R9 270 X Series (1280SP 20 c 1.12 GHz, 4 GB of memory DDR5 5.6 GHz 384 bits)

Storage devices
GB0750C4414 (750,2 GB, 16 MB Cache, SATA150): GB 699 (C)
WDC WD2002FAEX-007BA0 (2 TB SATA300/600, 3.5 ", 7200 RPM): 2 TB (E (F (G (H)))
WDC WD2002FAEX-007BA0 (2 TB SATA300/600, 3.5 ", 7200 RPM): 2 TB (D (I)
ASUS BW-16D1HT (SATA150, BD - RE, DVD +-RW, CD - RW, 4MB Cache): n/a (Z

Operating system
Windows system: Microsoft Windows 7 Ultimate 6.01.7601 (Service Pack 1)
Compliance platform: x 64

Bob,

Correct prefix of these processors is (x 5650, x 5660 and X 5675)

No no model part
x 5650 WG731AA
x 5660 WG732AA
X 5675 LB215AA

I also mentioned technical information below the means of these prefix.

Letter prefix:

X = Performance
E = Mainstream (editing)
L = optimized power
W = Workstation for up to 2 processors per motherboard.

The letters also refer to the numbers of power consumption of the processor in question. Note that the numbers associated with the letters are for Xeon "Nehalem"focus on the family and the older Xeons who use letter designations have different values of TDP, associated letters."

L = design power thermal (power draw scheduled with a 100% CPU load running a normal software) of 60 watts or less. These are the chips 'low voltage '.

E = 80 watt TDP. Intel refers to the Xeon 5500/5600 s with this prefix letter as the ' base' line, and thus, the draw of energy to sleep on these chips is often worse than any which of the other series of chips, despite the other chips may have a higher full-load power draw.

X = 95 watt TDP. These are the chips 'premium' as their TDP is not excessive that they are difficult to cool in a server rack, but their standby power consumption is much lower than the E-series chips.

W = TDP of 130 watts or more. What are the fastest Xeons and the hottest made and they are designed to be used in work stations and servers base cooling better than an average rack 1U or 2U server.

========================================================
Although I am an employee of HP, I speak for myself and not for HP.
========================================================

* Click on the star of CONGRATULATIONS on the left say "thank you."

Pavilion dv6t-6100 Quad Edition (2nd generation) CPU upgrade

I have pavilion dv6t-6100 Quad Edition laptop with one of the 2nd gen i7 processors. What type of upgrades to the graphics card and CPU can I do?

Hello:

Here is the link to the service manual for your laptop. Intel processors supported are listed in Chapter 1, page 2.

http://h10032.www1.HP.com/CTG/manual/c02842252.PDF

Graph cannot be upgraded, except if the card mother set is replaced. Support Intel motherboards with various graphics solutions are in Chapter 3, beginning on page 27. You must also pay special attention to the fact that the jury is for a processor dual core or quad.

I would also add that the financial costs and monitoring of personal work to exchange the motherboard and the processor upgrade, would exceed the cost of buying another laptop with the processor and graphics card solution you're looking for, following the sale or your trade.

Paul

Jul - 09 CPU installation - error could not copy file "libjox10.so" to
Hi all, I received this error while I was installing the last CPU on a 10.2.0.4 Instance Oracle running on a system of HP - UX Itanium:

Patch 8568398 :
Copy action: Desctination File "/ u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writable.
'oracle.rdbms, 10.2.0.4.0': failed to copy file 'libjox10.so' in ' / u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'

I checked metalink' site not found similar results.

Could someone help me?

Should I run/usr/sbin/slibclean and remove the last patch (Patch 8568398) and try again?

It's the full changelog...

$ opatch version
Citing O Patch 10.2 .0.4.7

OPatch Version: 10.2.0.4.7

OPatch succeeded.
$ sqlplus/nolog

SQL * more: Release 10.2.0.4.0 - Production on Fri 17 Jul 16:29:29 2009

Copyright (c) 1982, 2007, Oracle. All rights reserved.

SQL > conn / as sysdba
Connected.
SQL > shutdown immediate
The database is closed.
The database is dismounted.
ORACLE instance stops.
SQL > exit
Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
With partitioning, OLAP, Data Mining and Real Application Testing options
lsnrctl stop $

LSNRCTL for HP - UX: release 10.2.0.4.0 - Production on July 17, 2009 16:32:29

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=Hostname) (PORT = 1521)))
The command completed successfully
$ emctl stop dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://hostname:1158 / console/em/aboutApplication
stop Oracle Enterprise Manager Database Control 10g...
... Stopped.
$unzip p8534387_10204_HPUX - IA64.zip
<>...

$ cd 8534387
$ opatch napply-skip_subset-skip_duplicate
Citing O Patch 10.2 .0.4.7

Setup Oracle interim Patch version 10.2.0.4.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.

UTIL session

Oracle home: /u02/app/oracle/product/10.2/Db_1
Inventory Center: / u02/app/oracle/oraInventory
from: /var/opt/oracle/oraInst.loc
OPatch version: 10.2.0.4.7
YES version: 10.2.0.4.0
YES location: /u02/app/oracle/product/10.2/Db_1/oui
Location of the log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2 009-07-17_16-38-05 PM .log

History of patch file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_ history.txt

The utility 'napply '.
Checking for conflicts between the colonies...
Checking whether Oracle Home has components required by tasks...
Audit skip_duplicate
Audit skip_subset
Audit of conflict against Oracle Home...
OPatch continues with these patches: 7155248 7155249 7155250 7155251 7155252 7155253 7155254 7197583 7375611 7375613 7375617 7609057 7609058 8309587 8309592 8309623 8309632 8309637 8309642 8534387 8568395 8568397 8568398 8568402 8568404 8568405

Do you want? y
There
The user responded with: Y

Prior running check...
The prerequisite checking 'CheckApplicable' failed.
The details are:

Patch 8568398 :
Copy action: Desctination File "/ u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writable.
'oracle.rdbms, 10.2.0.4.0': failed to copy file 'libjox10.so' in ' / u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'

UtilSession failed: check the prerequisites 'CheckApplicable' failed.

$ opatch lsinventory-details
Citing O Patch 10.2 .0.4.7

Setup Oracle interim Patch version 10.2.0.4.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.

Oracle home: /u02/app/oracle/product/10.2/Db_1
Inventory Center: / u02/app/oracle/oraInventory
from: /var/opt/oracle/oraInst.loc
OPatch version: 10.2.0.4.7
YES version: 10.2.0.4.0
YES location: /u02/app/oracle/product/10.2/Db_1/oui
Location of the log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log

History of patch file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt

Location of the output file Lsinventory: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/lsinv/lsinventory2009-07-17_17-53-30PM.txt

--------------------------------------------------------------------------------
Installed products of higher level (2):

Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
There are 2 products in this House of Oracle.

Installed products (190):

Required agent Support 10.2.0.1.0 files
Agent required Support files Patch 10.2 .0.4.0
Common files Wizard 10.2.0.1.0
Wizard common files Patch 10.2 .0.4.0
Bali hand 1.1.18.0.0
Buildtools Common Files 10.2.0.1.0
Character Migration 10.2.0.1.0 utility
Utility of Migration of character set Patch 10.2 .0.4.0
Database Configuration and upgrade wizards 10.2.0.1.0
Configuration of database and the upgrade wizard Patch 10.2 .0.4.0
Database SQL Scripts 10.2.0.1.0
Database SQL scripts Patch 10.2 .0.4.0
Database Workspace Manager 10.2.0.1.0
Workspace Manager 10.2.0.4.0 database
DBJAVA necessary support files 10.2.0.1.0
DBJAVA required Support files Patch 10.2 .0.4.0
Enterprise Edition Options 10.2.0.1.0
Enterprise Manager Agent Core 10.2.0.1.0
Enterprise Manager Agent Core Patch 10.2 . 0.4.0a
Enterprise Manager Agent DB 10.2.0.1.0
Enterprise Manager Agent DB 10.2.0.4.0
Enterprise Manager Baseline 10.2.0.1.0
Enterprise Manager Baseline 10.2.0.4.0
Core of Enterprise Manager Patch 10.2 . 0.4.0a
Enterprise Manager Common Files 10.2.0.1.0
Enterprise Manager minimum integration 10.2.0.1.0
Common files for Enterprise Manager plugin 10.2.0.1.0
Common files for Enterprise Manager plugin 10.2.0.1.0
Enterprise Manager plugin common files Patch 10.2 .0.4.0
Core of Enterprise Manager 10.2.0.1.0 repository
Core repository Enterprise Manager Patch 10.2 . 0.4.0a
Enterprise Manager repository DB 10.2.0.1.0
Enterprise Manager 10.2.0.4.0 repository DB
Files common generic connectivity 10.2.0.1.0
Common generic connectivity files Patch 10.2 .0.4.0
A Common Files 10.2.0.1.0
Has common files Patch 10.2 .0.4.0
A file for DB 10.2.0.1.0
CONTAINS files for DB Patch 10.2 .0.4.0
Installation of common files 10.2.0.1.0
Installation of the common files Patch 10.2 .0.4.0
Install SDK Component 10.2.0.4.0
iSQL * Plus 10.2.0.1.0
iSQL * Plus 10.2.0.4.0
Java Runtime Environment 1.4.2.14.0
Common files JDBC 10.2.0.1.0
JDBC 10.2.0.4.0 common files
Required LDAP Support 10.2.0.1.0 files
LDAP required Support files Patch 10.2 .0.4.0
OLAP SQL Scripts 10.2.0.1.0
OLAP SQL scripts Patch 10.2 .0.4.0
Oracle Advanced Security 10.2.0.1.0
Oracle Advanced Security Patch 10.2 .0.4.0
Oracle Call Interface (OCI) 10.2.0.1.0
Oracle Call Interface (OCI) Patch 10.2 .0.4.0
RDBMS to Oracle Clusterware 10.2.0.1.0 Files
Oracle Clusterware RDBMS files Patch 10.2 .0.4.0
Oracle 1.2.1.0.0I Code Editor
10.2.7.1.0 Oracle Configuration Manager
Containers for Java 10.2.0.1.0 Oracle
Oracle to Java 10.2.0.4.0 containers
Basic Oracle required Support 10.2.0.1.0 files
Basic Oracle required Support files Patch 10.2 .0.4.0
Oracle Data Mining RDBMS files 10.2.0.1.0
Files RDBMS Oracle Data Mining Patch 10.2 .0.4.0
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g 10.2.0.1.0
Oracle Database 10 G 32-bit 10.1.0.2.0
Oracle Database 10g files 10.2.0.1.0 InterMedia
Oracle 10 g interMedia database files Patch 10.2 .0.4.0
Oracle Database 10 g Patch 10.2 .0.4.0
Oracle Database 10 g Patch 10.2 .0.4.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
2.2.13.0.0 Oracle database user interface
10.2.0.1.0 Oracle database utilities
Oracle database utilities Patch 10.2 .0.4.0
Display Oracle 9.0.2.0.0 policies
Oracle Enterprise Manager Console DB 10.2.0.1.0
Oracle Enterprise Manager Console DB 10.2.0.4.0
Oracle extended Windowing Toolkit 3.4.38.0.0
10.2.0.1.0 Oracle globalization support
Oracle globalization support Patch 10.2 .0.4.0
Oracle Help For Java 4.2.6.1.0
Oracle Help for the Web 1.1.10.0.0
Ice browser Oracle 5.2.3.6.0
10.2.0.1.0 Oracle InterMedia
10.2.0.1.0 Oracle interMedia Annotator
InterMedia 10.2.0.1.0 Oracle customer option
Option of Client Oracle interMedia Patch 10.2 .0.4.0
Oracle interMedia Java Advanced Imaging 10.2.0.1.0
Oracle interMedia Java Advanced Imaging Patch 10.2 .0.4.0
10.2.0.1.0 Oracle interMedia Locator
Oracle interMedia Locator Patch 10.2 .0.4.0
InterMedia Locator files 10.2.0.1.0 Oracle RDBMS
Files of RDBMS Oracle interMedia Locator Patch 10.2 .0.4.0
Oracle InterMedia Patch 10.2 .0.4.0
Client Oracle Internet Directory 10.2.0.1.0
Oracle Internet Directory Client Patch 10.2 .0.4.0
10.2.0.1.0 Oracle Java client
Java Oracle client Patch 10.2 .0.4.0
Oracle thin JDBC Driver for JDK 1.2 10.2.0.1.0
Oracle JDBC Driver thin for JDK 1.2 Patch 10.2 .0.4.0
Oracle thin JDBC Driver for JDK 1.4 10.2.0.1.0
Oracle JDBC Driver thin for JDK 1.4 Patch 10.2 .0.4.0
Oracle JDBC/OCI client Instant 10.2.0.1.0
Oracle JDBC/OCI Instant client Patch 10.2 .0.4.0
Oracle extended JFC Windowing Toolkit 4.2.33.0.0
Oracle JVM 10.2.0.1.0
Oracle JVM Patch 10.2 .0.4.0
10.2.0.1.0 Oracle LDAP administration
Oracle LDAP administration Patch 10.2 .0.4.0
10.2.0.1.0 Oracle Locale Builder
Common files for the gateway Message 10.2.0.1.0 Oracle
Oracle Gateway Common message queues Patch 10.2 .0.4.0
NET to Oracle 10.2.0.1.0
Net 10.2.0.1.0 Oracle listener
Oracle Net Listener Patch 10.2 .0.4.0
Net Oracle Patch 10.2 .0.4.0
Net 10.2.0.1.0 Oracle required support files
Oracle Net support files Patch 10.2 .0.4.0
Net 10.2.0.1.0 Oracle services
Oracle 9.0.4.0.0 Notification service
Oracle Notification service Patch 10.2 .0.4.0
Oracle OLAP 10.2.0.1.0
10.2.0.1.0 Oracle OLAP API
Oracle OLAP API Patch 10.2 .0.4.0
Oracle OLAP Patch 10.2 .0.4.0
RDBMS to Oracle OLAP Files 10.2.0.1.0
Oracle RDBMS OLAP files Patch 10.2 .0.4.0
One-time correction of Oracle 10.2.0.4.0 installer
Oracle Partitioning 10.2.0.1.0
Oracle Partitioning Patch 10.2 .0.4.0
10.2.0.1.0 Oracle programmer
Oracle RAC asked 10.2.0.1.0 support-a files
Oracle RAC asked to support-a files Patch 10.2 .0.4.0
Oracle Real Application Testing 10.2.0.4.0
Oracle Recovery Manager 10.2.0.1.0
Oracle Recovery Manager Patch 10.2 .0.4.0
Oracle has asked to Support 32-bit 10.2.0.0.0 files
Need Oracle 32-bit files supported Patch 10.2 .0.4.0
Oracle Spatial 10.2.0.1.0
Starter 10.2.0.1.0 Oracle Server
Starter of Oracle Database Patch 10.2 .0.4.0
10.2.0.1.0 Oracle text
Oracle Text Patch 10.2 .0.4.0
Oracle UIX 2.1.22.0.0
Universal Oracle install 10.2.0.4.0
10.2.0.1.0 Oracle Portfolio Manager
Oracle Wallet Manager Patch 10.2 .0.4.0
XML Oracle 10.2.0.1.0 SDK
Oracle XML SDK Patch 10.2 .0.4.0
Parser generator syntactic necessary support files 10.2.0.1.0
5.8.3.0.1 Perl interpreter
Perl interpreter Patch 5.8 . 3.0.1a
PL/SQL 10.2.0.1.0
PL/SQL 10.2.0.4.0
Embedded PL/SQL gateway 10.2.0.1.0
Embedded PL/SQL Gateway Patch 10.2 .0.4.0
Platform necessary support files 10.2.0.1.0
Required platform 10.2.0.4.0 Support files
Common files nsqlprep 10.2.0.1.0
Nsqlprep common files Patch 10.2 .0.4.0
Required precompiler Support 10.2.0.1.0 files
Precompiler required Support files Patch 10.2 .0.4.0
Required RDBMS Support 10.2.0.1.0 files
RDBMS required Support for customer moment 10.2.0.1.0 files
RDBMS required Instant Customer Support files Patch 10.2 .0.4.0
RDBMS required Support files Patch 10.2 .0.4.0
RegExp 2.1.9.0.0
Necessary Support 10.2.0.1.0 files
Examples of schema data 10.2.0.1.0
Sample data schema Patch 10.2 .0.4.0
Secure Socket Layer 10.2.0.1.0
Secure Socket Layer Patch 10.2 .0.4.0
SQL * Plus 10.2.0.1.0
SQL * Plus 10.2.0.4.0
SQL * Plus 10.2.0.1.0 required files Support
SQL * most necessary Support files Patch 10.2 .0.4.0
SQLJ DURATION 10.2.0.1.0
SQLJ DURATION Patch 10.2 .0.4.0
Required SSL Support for InstantClient 10.2.0.1.0 files
Required SSL Support of InstantClient files Patch 10.2 .0.4.0
Sun JDK 1.4.2.17.0
Sun JDK 9.2.0.1.0 extensions
Required XDK Support 10.2.0.1.0 files
XDK required Support files Patch 10.2 .0.4.0
XML Parser for Java 10.2.0.1.0
XML Parser for Java Patch 10.2 .0.4.0
XML Parser for Oracle JVM 10.2.0.1.0
XML Parser for Oracle JVM Patch 10.2 .0.4.0
There are 190 products installed in this House of Oracle.

There is no temporary patch installed in this House of Oracle.

--------------------------------------------------------------------------------

OPatch succeeded.
$

$ /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt more

Date & time: sat 17 Jul, 16:02:17 GMT - 03:00 2009
Oracle home: /u02/app/oracle/product/10.2/Db_1
OPatch worm. : 10.2.0.4.7
Current directory: /u02/app/oracle/product/10.2/Db_1
Command:-v
Log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-02-17PM.log

Date & time: Fri Jul 17 16:38:05 GMT - 03:00 2009
Oracle home: /u02/app/oracle/product/10.2/Db_1
OPatch worm. : 10.2.0.4.7
Current directory: / home/ora10g/8534387
Order: napply-skip_subset-skip_duplicate
Log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-38-05PM.log

Date & time: Fri Jul 17 17:53:30 GMT - 03:00 2009
Oracle home: /u02/app/oracle/product/10.2/Db_1
OPatch worm. : 10.2.0.4.7
Current directory: / home/ora10g/8534387
Order: lsinventory-details
Log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log

$

Please let me know if you need more information.

Regards and thanks in advance!

Martin
"is not accessible in writing" means two things.

1. There is no.
2. the permissions are not set correctly.

Determine who it is... This is the first step.

Qosmio G20-139: need help with 2nd HARD drive installation

Hey fans of tosh.

I got a Qosmio G20-139 and I want to install 2nd HARD drive. How can I go about it? I don't want to mirror the 1st HARD drive I just that it runs as a HDD separated for more storage. How do I set up and format?

I'm using WXP MCE any help received with gratitude, keep in mind, I'm no expert actually I'm a fool to the village that of been inbreeding so take me through in easy to understand steps that even I can follow.

Cheers in anticipation

StevieB

Hello

That s just to change the BIOS settings in the BIOS!
I think that the BIOS settings are placed in the last page of the BIOS (3).

Try setting the 1RAID-0 on the first HARD disk and the 2RAID-0 the second HARD disk.

It worked well on my laptop.

By the way; information on the RAID configuration found in the user manual.

Have a nice day ;)

Additional CPU installation

Hello
We bought a license for VMware Essentials and an extra CPU to add to our server. My question is this: should I install the license key before or after the addition of the CPU?
Thanks for any info,
Stem

I think it either is working fine. I install the CPU, make sure that everything happens correctly and that the CPU is seen and then install the new license.

2nd question of installation SSD

MSI MS-7525 mother HP Compaq Persario SR5410F-Boston map

I checked my BIOS settings to see if I have the opportunity to change SATA to AHCI settings for installing a SSD.

Under Settings Advanced SATA ony a 1 option, turn on or off there is no option for: SATA in the BIOS settings that allow him to be on the RAID, AHCI or IDE.

Flashing the BIOS is updated to version 5.22 (only update available), I now have this option for one SSD instalation?

Hello @Larry1946,

I understand you are trying to install an SSD in your HP Compaq Persario SR5410F. Unfortunately, the HP Compaq Persario SR5410F don't have AHCI capabilities. You can still install the SSD on your system, only it runs in "IDE Émulation" mode, a kind of compatibility mode that replicates the functionality of the old interface ATA "Integrated Drive Electronics". While your SSD will not display its potential performance or be able to take advantage of all the latest features SATA, it will still be able to run on your system.

I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

HP workstation xw6200 model number: DU937AV 2nd Hard Drive installation

Hello everyone

I am owner of a workstation XW6200 renovated with a HUA721010KLA330 of Hitachi (1.0 TB) 3 1/2 "7200 RPM SATA 3.0 GB / s. I still own one of these I would like to install in my machine.

I did years ago (my state of the art machine had a 1 GB HD at the time!), but things have changed since that time.

I'd appreciate your advice on how I should go about it.

Thank you very much for your help.

All the best,

Boyar

All we hear is an opinion, not a fact.
All we see is a point of view, not the truth.
[Marcus Aurelius]

Boyar,

The manual States that you can have 2 Sata Serial ATA drives. See the Manual.

Refer to article 69 pg 19 and 20 for the Sata data headers. See pg 100 for the hard drive Bay.

The PSU has 2 Sata power cables, so all you need is a Sata data cable. Just imitate existing lead.

install an SSD in Workstation Z600.

Hello

Description explains it, I thought to replace my current HARD drive to an SSD.

I did a lot research on this myself, but thought I would check here just wrap there are any falls known issues/pit with a ssd in z600 workstation installation, I will look at adding a 1 TB ssd.

1. installation of the material? the 3.5 inch z600 caddy would not accommodate a SSD, HP sells racks that will fit the z600?

2. compatibility with the workstation? are there types of SSD that are best suited for z600 workstations?

3. how to install and set up? is it as simple as connect via a cable SATA SSD and installing the OS? The Bios settings?

Any information would be appreciated,

Griff

Installed a Samsung 500 GB SATA III Evo in my z600... and it works perfectly.

Installed last week and have been installing programs and saw the general use of it without any problem. I wanted to test properly before posting a reply. It would be possible that I have problems with it later, but I would of thought that if she had problems I would be this topic now.

My SSD reads to 282 MB/s and writes to 270 MB/s - write random shuffle (IOPS) (IOPS) 51612 47395.

Being a SATA II gen workstation his don't reach only the full potential of the SSD to 540 / 520 MB/s writing but reading what I read, you won't notice the difference even its so fast... and I accept CC suite, mozilla, (did not install 3dsmax yet) all boot in seconds compared to the minutes on the old HARD drive.

Just to note that does not use a HP recovery disk to reinstall the OS. I have used a .iso official windows 7 and booted from USB (although it has some things useful, I didn't HP bloatware) drivers installed perfectly smoothly. Windows serial on bottom of Tower

1. installation of the material? the 3.5 inch z600 caddy would not accommodate a SSD, HP sells racks that will fit the z600?

"Via Scott comments, look for the version of"needs-tool"in the post above, mine cost £8.50 and takes every 5 seconds to fit the ssd for the z600. I would not buy the version of the tool-less sugguest... unless you have no hands and a lot of money. »

2. compatibility with the workstation? are there types of SSD that are best suited for z600 workstations?

"Yes, they are HP approved detailed SSDs in, but the post above, I had no problem with the class of consumer SSDS, but you dice with what brand." The Samsung EVO 500 GB, no problem. You can use a SATA III ssd, but you can get questions as warned by HP as their firmware does not support certain types (so basically if it doesn't they don't help you) ".»

3. how to install and set up? is it as simple as connect via a cable SATA SSD and installing the OS? The Bios settings?

"Make sure that your BIOS is set to RAID + AHCI (mine was already setup like that)." I used the samsung Wizard tool after installation and it will say that your PC is not set to AHCI, but I just ignore it. As long as ORGANIC and firmware are up-to-date, you'll be fine. Use a blindmate card to install the ssd (see above messages). Make sure you get the latest firmware on a USB before installing SSD, it should be the first thing to check after the installation of the SSD. You don't need to change cables SATA from II to III that the cables are retro-compatible... anyway have a SATA III in a z600 will limited you to speeds of SATA II (which compared to a normal HARD disk are ridiculously fast). Just plug in and install OS. It can be interesting to read about boring SSD, the magician of samsung suggest some things to do, but not all are necessary, either its life expectancy more performance... defintely deserves to be read to the top, if it's your first SSD as it was for me. »

Upgraded high hand the best I've done to my workstation and very simple to do. I'm glad that I waited for better support and cost down on the SSD before using.

You want to say a big thank you to Scott Harrison for his help on this. I nagged him much but really appreciated his advice! Congratulations to Scott and anyone else who posted help.

Enjoy your SSD, I'll do it.

Griff

Upgrade CPU laptop CQ60-211DX

I have a CQ60-211DX laptop. It uses a processor Intel Celeron 585 2.16 GHz core simple. It is a processor Socket 9.

I want to know if it is possible at this level to a processor Socket 9 better, such as the Pentium Dual Core or Core 2 Duo. My main concern is what families of processor will support the motherboard.

My research so far indicates that the Celeron has a max of 31W TDP. The Pentium Dual Core T3200 (2.0 GHz) and T3400 (2.16 Ghz) have a max TDP of 35W and the Core 2 Duo has a maximum TDP of 10 w. So, the Pentium Dual Core would generate a little more heat than the Celero, but I think he might be able to handle the additional 4W? The Core 2 Duo, on the other hand, almost cold.

The Celeron and Pentium have 1 MB of L2 cache, but the Core 2 Duo has 2 MB. The Core 2 Duo has a pace much more slow clock (1.5 Ghz), but I understand that it is still faster than the Pentium with the effectiveness of the architecture.

I don't know how the FSB affects things, but the Celeron and Pentium are 667 MHz while the Core 2 Dio is 533 MHz.

There are several other statistics I do not understand. A large part of the information I have just the pages that follow. Also, I have confirmed with a representative of Intel Celeron 585 is, indeed, Socket P.

http://Ark.Intel.com/compare.aspx?IDs=35583, 37160,33920,36681,

http://Ark.Intel.com/search.aspx?q=socket%20P&t=ProductGroup

http://Ark.Intel.com/ProductCollection.aspx?series=28964

http://Ark.Intel.com/ProductCollection.aspx?series=23517

It seems that Intel does not often stated that a processor is Socket P, but Sockets supported including the PPGA478 seems to be what I'm looking for. Not entirely sure, though. There seems to be the T7000 and T8000 T9000 series processors that support PPGA478, also.

http://Ark.Intel.com/product.aspx?ID=27255&processor=T7200&spec-codes=SL9SF, SL9SL

http://Ark.Intel.com/product.aspx?ID=27256&processor=T7400&spec-codes=SL9SE, SL9SK, SLGFJ, SLGFV

http://Ark.Intel.com/product.aspx?ID=27257&processor=T7600&spec-codes=SL9SD, SL9SJ

Although T8000 and T9000 models all have much higher FSB speeds. Yet once again, I don't know enough to understand what effect this has on compatibility, so I guess I should stay with 667 MHz.

Finally, I guess the U7000 series is more advanced than any of the T series, but other TPD and VID lower voltage max quantity, all other specs seem lower (FSB, clock speed, L2 cache memory).

Soldering is not a problem. I don't know if my processor is welded on or not (have not yet cracked open and will not until I know that it is worth), but even if this is the case, I have a soldering iron, solder Wick and the skills to remove the welding without damaging the components.

So what I've been able to reconstruct so far. If someone could let me know which processors can handle the motherboard on my laptop, I would really appreciate it. If someone could suggest what processors would offer the best performance gain, would be great, too.

Thank you!

Luke

Hello

What follows is a listed one CPU upgrade CPU option for your product.

Processor Mobile Intel Core 2 Duo T5850 - 2.16 GHz (Merom-MV, at 667 MHz front side bus, 2 MB cache level 2 total, taken Micro-FC-PGA, 35W TDP, 65nm)

If you plan to upgrade limit you your purchase know CPU compatible and functional. This way you will save yourself the disappointment of an incompatible CPU installation.

As notebook BIOS do not have many options tweakable, which disqualifies basically anything but what the manufacturer offers for upgrades in option.

the CPU I have listed and linked to is probably the best you can do for your laptop.

Kind regards

ERICO

Windows 7 64-bit clean installation failure. Error code: 0 x 80070017

Hello

I'm having hard to install Windows 7 64 bit on my desk that I had built two days ago. They do not have install my OS. they just put everything together. I go home, turn on the computer, start Windows and right in the middle of installation (file extension), the outage. I start the computer and start the installation, and after Windows copies the necessary files to develop, this error message appears: Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070017. I looked at the answers related to this error code, but none seem to fit my situation. The operating system I have is an OEM System Builder Pack, which has a copy of Windows 7 64-bit. Anyone know what I can do? I hope that I have not buy another OS, because one I have is bad.

I had the same problem installing my win 7 pro 64-bit, had the same error code, retried a couple of times and was stuck to the expansion of the files windows to 72% the most. I was trying to intall with RAID, I abandoned, reinstalled windows XP home and pulled out one of the reader, here I reformatted the drive with windows XP that was ready to be installed, after the successful installation of XP, I then installed windows 7 and failed 2 times before expanding windows files is passed to 100% after it past this 2nd line in installation everything went well. You may need to make some changes in the configuration of the BIO.

Good luck

Intel i3 use win. version 7?

Good day people,

I have posted before, however, I have another question this time. I got a laptop HP 6560 b, w / an intel i3 2350 m, 2.3 GHz. He got the victory. 7 pro. Now, I now get a 650 HP. It has a intel i3 2nd gen CPU @ 2.4 GHz. It is a model G4U96UT #ABA. Currently Win. 8 pro. Why I can't, (I CAN) format and reinstall Win. 7 on this system? Please, ANY input would be appreciated! Thank you!

Hello

Thanks for posting in the HP Support forum.

Good news - you can install Windows 7 Pro.

-HP supports Windows 7 drivers for your computer

http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome?sp4ts.Oid=5225015&AC.admitted=1415917432522.876444892.492883150

-If you have a Windows 8/8.1 Pro license, you are allowed to downgrade and use Win 7 Pro (if the license is not HP OEM, but full product FPP or Preinstalled)

http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/downgrade_rights.aspx#fBid=b9cghhVnhkg

http://www.ZDNet.com/HP-clarifies-Windows-8-consumer-PC-downgrade-and-warranties-7000007280/

Otherwise, if it is HP OEM lic for Windows 8, you will have a separate ICA for Windows 7, but technically Windows 7 can be installed and is supported on this computer.

Here you can download Windows 7 If you do not have the installation media:

http://www.howtogeek.com/186775/how-to-download-Windows-7-8-and-8.1-installation-media-legally/

G6 - 1191ev: HP Pavilion g6 - 1191ev

Hello everyone and thanks for the help with this forum,.

I am owner of a g6 Pavilion - 1191ev. About two days ago, I was working on my laptop and suddenly it crashed it upward, frozen screen and it started beeping out of control, so I pressed the power button turned off, after waiting until 10 seconds it could possibly release. Later, I tried to turn it on again the phone but the Windows 7 to my laptop would not be responsible. A screen that says that perhaps a change on the material from the laptop or failure generally happened initially appears on the screen.

In addition, there are always two options: the first option (which is presented as the recommended) is to have the blackout which took place has been fixed by windows, but when I choose this option, windows is loaded up to a point, a screen lights up, it says on a black screen: "REM could not perform the screening because could not detect 2 hard drives on this system.

However, the second option suggests a normal load of Windows 7, as usual and this time loading led again in the first screen that appears with two options.

After a bit of research on the forum, I decided to run the "main hard drive than self test" on the configuration of the BIOS, and a mistake "305" appeared on the screen. I also ran the "memory test", which was adopted with success. When I select 'system recovery' on the menu of the BIOS Setup, then the same screen appears, like the screen which appears after the first choice of the option, with "2 hard drives.

So I guess, I have to change my hard drive no doubt, but I'd like to take your opinion too.

Is there something else I could sort to do before paying money for the new hard drive?

Also, in the event that unfortunately, I have to buy a new hard drive, on what must I pay attention when I'm about to buy the new hard drive? I noticed on some posts on the forum, some say that the new hard disk must be equal at least ability with the previous, but not below.

Also what type of a new hard drive do I need? And what are the parameters I should do after placing the new hard drive in the laptop, in order to get my phone working again? Should I buy something else than the drive?

I realized that the process of replacing the hard drive of my laptop is relatively simple. Is this fair?

Following are the features of my laptop:

purchase country: Greece

installed processor type: Intel

(As noted above) OS: Windows 7

Unfortunately my laptop is out of warranty HP since the October of 2011.

Thanks again for any help provided in advance!

Would be happy to hear your opinion about my problem!

Hello

The error code that you mention - 305 is a scalable disk Self Test (DST) failure - would indicate that you need to replace the hard drive and this is also compatible with the startup problem you describe.

Regarding replace HARD drive, you are not limited to any particular drive manufacturer, but the recovery media allows you to reinstall the operating system on the new drive probably will not work on a drive that is lower in quality than the original - a bit larger is fine. ( Note: this restriction does not apply if you choose the 2nd option of installation described below).

Your laptop is listed as coming with a 640 GB hard drive, but as there is no real difference in cost, you can replace with a 750 GB HARD drive and get a little bit of space - the player on the following link is an example that would be perfect for your laptop.

750 GB hard drive.

The procedure to replace the hard drive starts on Page 54 of your & Maintenance Guide.

*********************************************************************

Regarding the reinstallation of the operating system on the new HARD drive, there are two options available.
1. You can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office). They will also recreate all of the original scores, including the recovery Partition.
Order HP recovery disks.

2. Another option, you might consider is to create your own Windows 7 installation disc.

Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

An example of a COA label can be seen here.

You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here. The source of the Windows Image is Digital River.

Windows 7 sp1-iso-official-32-bit-and-64-bit

Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

You may need, additional drivers and software are here.

Best regards

DP - K

LabVIEW for linux (Ubuntu 64-bit)

University of Helsinki uses a centralized managed linux installation on all linux workstations. The distribution is based on Ubuntu 9.10, and it is considering moving to 10.04 LTS. Almost all of the facilities are 64-bit, only a few old machines (> 5 years of age) are still using 32-bit installation.

In the Physics Department, there are about 500 machines and about 30% of those who are linux workstations. We strive to get LabVIEW for Linux installed on our desktop, then run under Ubuntu 64-bit.

1 problem (not a problem): For some strange reason, the installation media does not CD/DVD use normal files (iso9660) system, but the media is formatted with the file system "Mac OS X HDF +". It works under linux, of course, but has been a source of mild confusion. It would be wise to change the normal file system to the next version.

2nd problem: The installation under Ubuntu does not work. Namely:

First I mount the media with the "mount-t hfsplus/dev/sr0/media/cdrom0" and try running the installation script
CD/media/cdrom0/Linux/labview-2009
sudo knew
. / INSTALL

Installation is not going smoothly. According to the error message, the script is not found the library libbz2:

/ Media/cdrom0/Linux/LabVIEW-2009/bin/rpmq: error while loading shared libraries: libbz2.so.1: cannot open shared object file: no such file or directory

However, the library is in standard place:
$ ls/lib/libbz2 *.
/lib/libbz2.so.1 /lib/libbz2.so.1.0 /lib/libbz2.so.1.0.4

I know, "support of the distribution" list only include Mandriva, RedHat, and SUSE. The version of LabVIEW is the latest version of the fall of 2009. Does anyone have any ideas what to try next?

see you soon,
Pekko

I5 to I7 upgrade

Hello

I have an elitebook 2560p with core i5 2520 m with PPGA988 plug so I want to spend to I7 second gen 2XXXm with 4-wire base 8

the chipset is QM67

Wat Producte will be fin

According to Guide Service and Maintenance of PC portable HP EliteBook 2560 p, the following processors are supported by the laptop of HP EliteBook 2560p;

631252-001 - Intel Core i7 - 2620 M 2.70 GHz (turbo up to 3.40 GHz) processor, 4 MB L3 cache, 4-wire, standard voltage (35-W)
631255-001 - Intel Core i5 - 2540 M 2.60 GHz (turbo up to 3.30 GHz) processor, 3 MB L3 cache, 4-wire, standard voltage (35-W)
631253-001 - Intel Core i5 - 2520 M 2.50 GHz (turbo up to 3.20 GHz) processor, 3 MB L3 cache, 4-wire, standard voltage (35-W)
653341-001 - Intel Core i5 - 2430 M 2.30 GHz (turbo up to 2.90 GHz) processor, 3 MB L3 cache, 4-wire, standard voltage (35-W)
638039-001 - Intel Core i5 - 2410 M 2.30 GHz (turbo up to 2.90 GHz) processor, 3 MB L3 cache, 4-wire, standard voltage (35-W( )

Any CPU installation have not been installed on your computer may not work and you assume all risk of change to your computer. Other processors of the same series, overhaul, kernel, etc may work, but there is no guarantee.

If you have any other questions, feel free to ask.

Please click the 'Thumbs Up' white LAURELS to show your appreciation

2nd Z600 CPU installation

Similar Questions

Maybe you are looking for