Additional CPU installation

Hello

We bought a license for VMware Essentials and an extra CPU to add to our server. My question is this: should I install the license key before or after the addition of the CPU?

Thanks for any info,

Stem

I think it either is working fine.  I install the CPU, make sure that everything happens correctly and that the CPU is seen and then install the new license.

Tags: VMware

Similar Questions

  • Add additional CPU licenses to host

    I have a host of 4 shooting, a business licence 384G of RAM and more.  The server owner added an additional 128G of RAM to the host.  My understanding of the new license model, I need to add an extra 2 CPU licenses to the host to take full advantage of the newly added memory.  I can't find where and how to do it.  Any help on this would be appreciated.

    VRAM licenses are not tied to the physical memory in the ESXi host, but the virtual memory assigned and used by the virtual machines - this document will nadine you information on how to vRAM and how to check it- http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2000935

    Depending on your environment - if you vCenetr you would add it to your vCenter Server - uf you run a stand-alone ESXi host you use the vSphere client and go to licensing features in the configuration tab

  • Jul - 09 CPU installation - error could not copy file "libjox10.so" to

    Hi all, I received this error while I was installing the last CPU on a 10.2.0.4 Instance Oracle running on a system of HP - UX Itanium:

    Patch 8568398 :
    Copy action: Desctination File "/ u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writable.
    'oracle.rdbms, 10.2.0.4.0': failed to copy file 'libjox10.so' in ' / u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'

    I checked metalink' site not found similar results.

    Could someone help me?

    Should I run/usr/sbin/slibclean and remove the last patch (Patch 8568398) and try again?



    It's the full changelog...






    $ opatch version
    Citing O Patch 10.2 .0.4.7

    OPatch Version: 10.2.0.4.7

    OPatch succeeded.
    $ sqlplus/nolog

    SQL * more: Release 10.2.0.4.0 - Production on Fri 17 Jul 16:29:29 2009

    Copyright (c) 1982, 2007, Oracle. All rights reserved.

    SQL > conn / as sysdba
    Connected.
    SQL > shutdown immediate
    The database is closed.
    The database is dismounted.
    ORACLE instance stops.
    SQL > exit
    Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
    With partitioning, OLAP, Data Mining and Real Application Testing options
    lsnrctl stop $

    LSNRCTL for HP - UX: release 10.2.0.4.0 - Production on July 17, 2009 16:32:29

    Copyright (c) 1991, 2007, Oracle. All rights reserved.

    Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=Hostname) (PORT = 1521)))
    The command completed successfully
    $ emctl stop dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    http://hostname:1158 / console/em/aboutApplication
    stop Oracle Enterprise Manager Database Control 10g...
    ... Stopped.
    $unzip p8534387_10204_HPUX - IA64.zip
    <>...

    $ cd 8534387
    $ opatch napply-skip_subset-skip_duplicate
    Citing O Patch 10.2 .0.4.7

    Setup Oracle interim Patch version 10.2.0.4.7
    Copyright (c) 2009, Oracle Corporation. All rights reserved.

    UTIL session

    Oracle home: /u02/app/oracle/product/10.2/Db_1
    Inventory Center: / u02/app/oracle/oraInventory
    from: /var/opt/oracle/oraInst.loc
    OPatch version: 10.2.0.4.7
    YES version: 10.2.0.4.0
    YES location: /u02/app/oracle/product/10.2/Db_1/oui
    Location of the log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2 009-07-17_16-38-05 PM .log

    History of patch file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_ history.txt

    The utility 'napply '.
    Checking for conflicts between the colonies...
    Checking whether Oracle Home has components required by tasks...
    Audit skip_duplicate
    Audit skip_subset
    Audit of conflict against Oracle Home...
    OPatch continues with these patches: 7155248 7155249 7155250 7155251 7155252 7155253 7155254 7197583 7375611 7375613 7375617 7609057 7609058 8309587 8309592 8309623 8309632 8309637 8309642 8534387 8568395 8568397 8568398 8568402 8568404 8568405

    Do you want? y
    There
    The user responded with: Y

    Prior running check...
    The prerequisite checking 'CheckApplicable' failed.
    The details are:

    Patch 8568398 :
    Copy action: Desctination File "/ u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writable.
    'oracle.rdbms, 10.2.0.4.0': failed to copy file 'libjox10.so' in ' / u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'

    UtilSession failed: check the prerequisites 'CheckApplicable' failed.

    $ opatch lsinventory-details
    Citing O Patch 10.2 .0.4.7

    Setup Oracle interim Patch version 10.2.0.4.7
    Copyright (c) 2009, Oracle Corporation. All rights reserved.


    Oracle home: /u02/app/oracle/product/10.2/Db_1
    Inventory Center: / u02/app/oracle/oraInventory
    from: /var/opt/oracle/oraInst.loc
    OPatch version: 10.2.0.4.7
    YES version: 10.2.0.4.0
    YES location: /u02/app/oracle/product/10.2/Db_1/oui
    Location of the log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log

    History of patch file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt

    Location of the output file Lsinventory: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/lsinv/lsinventory2009-07-17_17-53-30PM.txt

    --------------------------------------------------------------------------------
    Installed products of higher level (2):

    Oracle Database 10g 10.2.0.1.0
    Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
    There are 2 products in this House of Oracle.


    Installed products (190):

    Required agent Support 10.2.0.1.0 files
    Agent required Support files Patch 10.2 .0.4.0
    Common files Wizard 10.2.0.1.0
    Wizard common files Patch 10.2 .0.4.0
    Bali hand 1.1.18.0.0
    Buildtools Common Files 10.2.0.1.0
    Character Migration 10.2.0.1.0 utility
    Utility of Migration of character set Patch 10.2 .0.4.0
    Database Configuration and upgrade wizards 10.2.0.1.0
    Configuration of database and the upgrade wizard Patch 10.2 .0.4.0
    Database SQL Scripts 10.2.0.1.0
    Database SQL scripts Patch 10.2 .0.4.0
    Database Workspace Manager 10.2.0.1.0
    Workspace Manager 10.2.0.4.0 database
    DBJAVA necessary support files 10.2.0.1.0
    DBJAVA required Support files Patch 10.2 .0.4.0
    Enterprise Edition Options 10.2.0.1.0
    Enterprise Manager Agent Core 10.2.0.1.0
    Enterprise Manager Agent Core Patch 10.2 . 0.4.0a
    Enterprise Manager Agent DB 10.2.0.1.0
    Enterprise Manager Agent DB 10.2.0.4.0
    Enterprise Manager Baseline 10.2.0.1.0
    Enterprise Manager Baseline 10.2.0.4.0
    Core of Enterprise Manager Patch 10.2 . 0.4.0a
    Enterprise Manager Common Files 10.2.0.1.0
    Enterprise Manager minimum integration 10.2.0.1.0
    Common files for Enterprise Manager plugin 10.2.0.1.0
    Common files for Enterprise Manager plugin 10.2.0.1.0
    Enterprise Manager plugin common files Patch 10.2 .0.4.0
    Core of Enterprise Manager 10.2.0.1.0 repository
    Core repository Enterprise Manager Patch 10.2 . 0.4.0a
    Enterprise Manager repository DB 10.2.0.1.0
    Enterprise Manager 10.2.0.4.0 repository DB
    Files common generic connectivity 10.2.0.1.0
    Common generic connectivity files Patch 10.2 .0.4.0
    A Common Files 10.2.0.1.0
    Has common files Patch 10.2 .0.4.0
    A file for DB 10.2.0.1.0
    CONTAINS files for DB Patch 10.2 .0.4.0
    Installation of common files 10.2.0.1.0
    Installation of the common files Patch 10.2 .0.4.0
    Install SDK Component 10.2.0.4.0
    iSQL * Plus 10.2.0.1.0
    iSQL * Plus 10.2.0.4.0
    Java Runtime Environment 1.4.2.14.0
    Common files JDBC 10.2.0.1.0
    JDBC 10.2.0.4.0 common files
    Required LDAP Support 10.2.0.1.0 files
    LDAP required Support files Patch 10.2 .0.4.0
    OLAP SQL Scripts 10.2.0.1.0
    OLAP SQL scripts Patch 10.2 .0.4.0
    Oracle Advanced Security 10.2.0.1.0
    Oracle Advanced Security Patch 10.2 .0.4.0
    Oracle Call Interface (OCI) 10.2.0.1.0
    Oracle Call Interface (OCI) Patch 10.2 .0.4.0
    RDBMS to Oracle Clusterware 10.2.0.1.0 Files
    Oracle Clusterware RDBMS files Patch 10.2 .0.4.0
    Oracle 1.2.1.0.0I Code Editor
    10.2.7.1.0 Oracle Configuration Manager
    Containers for Java 10.2.0.1.0 Oracle
    Oracle to Java 10.2.0.4.0 containers
    Basic Oracle required Support 10.2.0.1.0 files
    Basic Oracle required Support files Patch 10.2 .0.4.0
    Oracle Data Mining RDBMS files 10.2.0.1.0
    Files RDBMS Oracle Data Mining Patch 10.2 .0.4.0
    Oracle Database 10g 10.2.0.1.0
    Oracle Database 10g 10.2.0.1.0
    Oracle Database 10 G 32-bit 10.1.0.2.0
    Oracle Database 10g files 10.2.0.1.0 InterMedia
    Oracle 10 g interMedia database files Patch 10.2 .0.4.0
    Oracle Database 10 g Patch 10.2 .0.4.0
    Oracle Database 10 g Patch 10.2 .0.4.0
    Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
    2.2.13.0.0 Oracle database user interface
    10.2.0.1.0 Oracle database utilities
    Oracle database utilities Patch 10.2 .0.4.0
    Display Oracle 9.0.2.0.0 policies
    Oracle Enterprise Manager Console DB 10.2.0.1.0
    Oracle Enterprise Manager Console DB 10.2.0.4.0
    Oracle extended Windowing Toolkit 3.4.38.0.0
    10.2.0.1.0 Oracle globalization support
    Oracle globalization support Patch 10.2 .0.4.0
    Oracle Help For Java 4.2.6.1.0
    Oracle Help for the Web 1.1.10.0.0
    Ice browser Oracle 5.2.3.6.0
    10.2.0.1.0 Oracle InterMedia
    10.2.0.1.0 Oracle interMedia Annotator
    InterMedia 10.2.0.1.0 Oracle customer option
    Option of Client Oracle interMedia Patch 10.2 .0.4.0
    Oracle interMedia Java Advanced Imaging 10.2.0.1.0
    Oracle interMedia Java Advanced Imaging Patch 10.2 .0.4.0
    10.2.0.1.0 Oracle interMedia Locator
    Oracle interMedia Locator Patch 10.2 .0.4.0
    InterMedia Locator files 10.2.0.1.0 Oracle RDBMS
    Files of RDBMS Oracle interMedia Locator Patch 10.2 .0.4.0
    Oracle InterMedia Patch 10.2 .0.4.0
    Client Oracle Internet Directory 10.2.0.1.0
    Oracle Internet Directory Client Patch 10.2 .0.4.0
    10.2.0.1.0 Oracle Java client
    Java Oracle client Patch 10.2 .0.4.0
    Oracle thin JDBC Driver for JDK 1.2 10.2.0.1.0
    Oracle JDBC Driver thin for JDK 1.2 Patch 10.2 .0.4.0
    Oracle thin JDBC Driver for JDK 1.4 10.2.0.1.0
    Oracle JDBC Driver thin for JDK 1.4 Patch 10.2 .0.4.0
    Oracle JDBC/OCI client Instant 10.2.0.1.0
    Oracle JDBC/OCI Instant client Patch 10.2 .0.4.0
    Oracle extended JFC Windowing Toolkit 4.2.33.0.0
    Oracle JVM 10.2.0.1.0
    Oracle JVM Patch 10.2 .0.4.0
    10.2.0.1.0 Oracle LDAP administration
    Oracle LDAP administration Patch 10.2 .0.4.0
    10.2.0.1.0 Oracle Locale Builder
    Common files for the gateway Message 10.2.0.1.0 Oracle
    Oracle Gateway Common message queues Patch 10.2 .0.4.0
    NET to Oracle 10.2.0.1.0
    Net 10.2.0.1.0 Oracle listener
    Oracle Net Listener Patch 10.2 .0.4.0
    Net Oracle Patch 10.2 .0.4.0
    Net 10.2.0.1.0 Oracle required support files
    Oracle Net support files Patch 10.2 .0.4.0
    Net 10.2.0.1.0 Oracle services
    Oracle 9.0.4.0.0 Notification service
    Oracle Notification service Patch 10.2 .0.4.0
    Oracle OLAP 10.2.0.1.0
    10.2.0.1.0 Oracle OLAP API
    Oracle OLAP API Patch 10.2 .0.4.0
    Oracle OLAP Patch 10.2 .0.4.0
    RDBMS to Oracle OLAP Files 10.2.0.1.0
    Oracle RDBMS OLAP files Patch 10.2 .0.4.0
    One-time correction of Oracle 10.2.0.4.0 installer
    Oracle Partitioning 10.2.0.1.0
    Oracle Partitioning Patch 10.2 .0.4.0
    10.2.0.1.0 Oracle programmer
    Oracle RAC asked 10.2.0.1.0 support-a files
    Oracle RAC asked to support-a files Patch 10.2 .0.4.0
    Oracle Real Application Testing 10.2.0.4.0
    Oracle Recovery Manager 10.2.0.1.0
    Oracle Recovery Manager Patch 10.2 .0.4.0
    Oracle has asked to Support 32-bit 10.2.0.0.0 files
    Need Oracle 32-bit files supported Patch 10.2 .0.4.0
    Oracle Spatial 10.2.0.1.0
    Starter 10.2.0.1.0 Oracle Server
    Starter of Oracle Database Patch 10.2 .0.4.0
    10.2.0.1.0 Oracle text
    Oracle Text Patch 10.2 .0.4.0
    Oracle UIX 2.1.22.0.0
    Universal Oracle install 10.2.0.4.0
    10.2.0.1.0 Oracle Portfolio Manager
    Oracle Wallet Manager Patch 10.2 .0.4.0
    XML Oracle 10.2.0.1.0 SDK
    Oracle XML SDK Patch 10.2 .0.4.0
    Parser generator syntactic necessary support files 10.2.0.1.0
    5.8.3.0.1 Perl interpreter
    Perl interpreter Patch 5.8 . 3.0.1a
    PL/SQL 10.2.0.1.0
    PL/SQL 10.2.0.4.0
    Embedded PL/SQL gateway 10.2.0.1.0
    Embedded PL/SQL Gateway Patch 10.2 .0.4.0
    Platform necessary support files 10.2.0.1.0
    Required platform 10.2.0.4.0 Support files
    Common files nsqlprep 10.2.0.1.0
    Nsqlprep common files Patch 10.2 .0.4.0
    Required precompiler Support 10.2.0.1.0 files
    Precompiler required Support files Patch 10.2 .0.4.0
    Required RDBMS Support 10.2.0.1.0 files
    RDBMS required Support for customer moment 10.2.0.1.0 files
    RDBMS required Instant Customer Support files Patch 10.2 .0.4.0
    RDBMS required Support files Patch 10.2 .0.4.0
    RegExp 2.1.9.0.0
    Necessary Support 10.2.0.1.0 files
    Examples of schema data 10.2.0.1.0
    Sample data schema Patch 10.2 .0.4.0
    Secure Socket Layer 10.2.0.1.0
    Secure Socket Layer Patch 10.2 .0.4.0
    SQL * Plus 10.2.0.1.0
    SQL * Plus 10.2.0.4.0
    SQL * Plus 10.2.0.1.0 required files Support
    SQL * most necessary Support files Patch 10.2 .0.4.0
    SQLJ DURATION 10.2.0.1.0
    SQLJ DURATION Patch 10.2 .0.4.0
    Required SSL Support for InstantClient 10.2.0.1.0 files
    Required SSL Support of InstantClient files Patch 10.2 .0.4.0
    Sun JDK 1.4.2.17.0
    Sun JDK 9.2.0.1.0 extensions
    Required XDK Support 10.2.0.1.0 files
    XDK required Support files Patch 10.2 .0.4.0
    XML Parser for Java 10.2.0.1.0
    XML Parser for Java Patch 10.2 .0.4.0
    XML Parser for Oracle JVM 10.2.0.1.0
    XML Parser for Oracle JVM Patch 10.2 .0.4.0
    There are 190 products installed in this House of Oracle.


    There is no temporary patch installed in this House of Oracle.


    --------------------------------------------------------------------------------

    OPatch succeeded.
    $



    $ /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt more

    Date & time: sat 17 Jul, 16:02:17 GMT - 03:00 2009
    Oracle home: /u02/app/oracle/product/10.2/Db_1
    OPatch worm. : 10.2.0.4.7
    Current directory: /u02/app/oracle/product/10.2/Db_1
    Command:-v
    Log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-02-17PM.log


    Date & time: Fri Jul 17 16:38:05 GMT - 03:00 2009
    Oracle home: /u02/app/oracle/product/10.2/Db_1
    OPatch worm. : 10.2.0.4.7
    Current directory: / home/ora10g/8534387
    Order: napply-skip_subset-skip_duplicate
    Log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-38-05PM.log


    Date & time: Fri Jul 17 17:53:30 GMT - 03:00 2009
    Oracle home: /u02/app/oracle/product/10.2/Db_1
    OPatch worm. : 10.2.0.4.7
    Current directory: / home/ora10g/8534387
    Order: lsinventory-details
    Log file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log

    $






    Please let me know if you need more information.

    Regards and thanks in advance!

    Martin

    "is not accessible in writing" means two things.

    1. There is no.
    2. the permissions are not set correctly.

    Determine who it is... This is the first step.

  • 2nd Z600 CPU installation

    I have a HP Z600 workstation with 1 x E5570 cpu.

    Can I install a 2nd type processor x 5570 on the motherboard?

    What is the difference between E5570 and X 5570, and if so, which is best?

    Thank you

    Caspian Sea

    The Z600 features of two processor on the motherboard ready to go, as with the xw6400 and the xw6600.  So, it is much easier and cheaper to add a second processor for the Z600 for a Z620 which requires a 'minimotherboard' separated to add to the top of the main motherboard before you can add a second processor.

    Here is information on the naming conventions names to the processors, to the low position for E vs X:

    /T5/workstations-z-series-XW-series/Z600-CPU-upgrade/m-p/6649124/highlight/true#M18367

    I saw the HP list some X processors as an E processor when Intel and the rest of the world as a x lists... follow the convention of Intel and the surefire way to know exactly what processor you have is to take off the heat, remove the Processor heatsink, clean it and check its code sSpec laser engraved on the top of the processor stainless steel cover.  You must at least be comfortable with this process before thinking to add a second processor.  Dough thermal costs for both is useful if you have two processors.

    Note the orientation of the processor before carefully remove you it... There is a corner triangular gold on it which is oriented to a corner of the plastic of the decision threshold, and you can see that, after that you turn to the top of the stainless steel on its hinge fixing.  After you have added the thermal paste very carefully put the processor down on delicate pins with it's interface.  I hold the processors North-South, not East-West... with North being the hinge of the hold down.  In lots of light here and note that tasks molded into the plastic of the socket to align with the edge of processor corresponding to tasks... together down gently, then check alignment, then close the hold down.

    X 5570 has a single code sSpec, SLBF3, and that should be easy to find. It's a max 95W TDP processor and you can buy new Intel for about $1400.00 USD today.  Or, for about $35,00 or even a little less off eBay.  I only buy used Xeons and had a bad on about 50, and the seller has sent a replacement free of charge.

    You want to match a heatsink / fan new / used eBay for what you have, and the part number will be on the radiator you have.  I recommend to use Noctua thermal paste, and only a nice little dab is needed to get a good thin layer on top in stainless steel before replacement and reassembly.  I extend it with a finger gloved latex in a circualr motion to cover the flat top surface, where was the laser engraving.  You want pretty thin... not so thin that they are able to see through, but close to that.  You screw the radiator on sequentially across, opposing live a few laps at a time, until they just gently... the bottom but do not turn the handle downwards beyond.  It is fine to do walks back and gently bottem them again to get all too tight 4.

    Upgrade to the latest version of the BIOS first, and only a reboot may be necessary to work with the new processor.  The latest version of the BIOS gives you the last HP "microcode", a hidden part of some updates to the BIOS, and which includes the list of specific processors that HP has certified to work with your particular workstation.  For example, you might see a processor that works in your computer in one of the QuickSpecs, but if you do not list your BIOS firmware, it won't work.  I do not think that HP ever pulls a processor from the list of firmware when it moves forward with a workstation... compatible motherboards X56xx should be able to run all X55xx older processors.

    Partners, it is important to know that there are two main versions of the Z600, with the latest version capable of running with some processors than the earlier version cannot.  By combining your second processor to exactly what you already have you don't need to think about this question, but if you want faster dual processor completely new, you will need to do more research in this forum about the revisions, which will be held with the two main motherboard reviews and the fact that you can use "performance" heat sinks if you go with the processors the "." more hot.

    The last QuickSpec for the Z600 (v51) covers X56xx and processors E56xx... QuickSpec is for the new revision of the motherboard.  You can search in the HP to find their searchable list of all prior QuickSpecs and see which processors have been certified for your motherboard probably original review.  Based on this research, you can choose to move to two correspondents faster 95W X55xx Xeons, but only get those who are in the list QuickSpec from HP (and get the latest not if there are several codes sSpec) for everything what install you on.

    Searchable QuickSpecs for Z600:

    Later and probably the last, is v51.  The PDF link get you more later.  The HTML link offers you the most recent, but also a drop-down list in the upper right to use to go back in time:

    http://WWW8.HP.com/h20195/v2/GetHtml.aspx?DocName=c04110961&search=Z600

    From there, you can create a chart on all previous processors available and choose what you want.  I recommend doing a chart for only the fastest and the second more fast X55xx processors in each QuickSpec and check eBay for the price.  A step down from the fastest often gets you a large drop of cost.   If you do this work, please report it here to help others.

  • How can I use additional CPU power to make multiple projects simultaneously in adobe media encoder?

    I have a 5960 x and I use maybe 30% of a render and only up to 3.3 GHz. cpu load since I m d OC to 4.2 GHz, I know that there must be some extra cpu power to operate.

    Also I often renderings of projects 40 + and it would be a huge time saver.

    Thank you!

    Sorry, I misread that.  I'm afraid that it cannot be done now.

    Try to submit a feature request:

    Feature request/Bug Report Form

  • Additional CPU added to SLES 10 VM not detected by core

    We have just added a 2nd vCPU to two of our guests SLES 10 SP2, and even if the CPU is also present in VC and in graphics performance, the core is not seeing her and always reports as a single CPU.

    Any thoughts?

    Thank you

    Jon

    SMP kernel?

    Marcelo Soares

    VMWare Certified Professional 310/410

    Technical Support Engineer

    Chief Executive Officer of the Linux server

  • Additional memory installation

    Hello

    Can I install 2 x 4 GB memory cards in the slots at the bottom of my iMac 2011 environment while keeping the cards of 2 GB in the top slots?

    either they are correct pair configurations (side by side)?

    There is no mention that slot machines are the pairs. Normally we would identical memory cards in slots 1, 3, and another identical 2.4 slots.

    Does anyone have an idea of this to get the best out the higher level maps?

    Thanks a bunch

    Anthony Hunt

    Auckland

    NZ

    OK I think I can have answered it for me.

    According to the about this Mac and report/memory system , it displays 4 benches of 0.1, 0, 1.

    So I guess that 2 identical cards placed in Bank 0 , and the other 2 in Bank 1.

    If anyone thinks that this is not correct please feel free to let me know :)

    See you soon

  • HP Touchsmart 520-1030 - additional memory installation

    I am trying to install extra memory on my HP Touchsmart. I was told when buying this PC I could simply take the back off and put in a stick more than 4 GB of DDR3 RAM that this model has 2 slots, of which only 1 is currently used? I don't see where the memory going!

    Can anyone help please?

    Thank you

    Andy

    Windows 7 (64-bit)

    This article should help you install more memory.

    http://support.HP.com/us-en/document/c03052806

    .

    And the following article contains information about the memory upgrade for your product.

    http://support.HP.com/us-en/document/c03073665

  • Additional memory installation on a Satellite 3000

    I'm unable to install memory on a Satellite 3000 - X 11.

    It was suggested that I need to update the bios, so ia´ve donwloaded Bios 1.60.
    When I try to reboot it tells me "This is not the right update for my system"
    But it's the update is recommended.

    [Edited by: admin on April 22, 2007 20:41]

    Hello

    I put t know why you can not upgrade the BIOS BUT usually the BIOS update is not necessary if you want to upgrade the memory on your laptop
    I think that if you use the memory modules right everything should work properly

    Found a useful page that gives interesting information on upgrading memory on Sat 3000 - x 11
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=14194&ft=m&St=3

    So according to this page, you should use modules SODIMM PC133 144 pins and you can upgrade the memory to 512 MB max

  • Additional RAM installation

    Hello

    If I install extra RAM into my PC, I have to change the settings in XP or the system will automatically adjust anyway?

    See you soon.

    The computer will do everything for you. No parameters for you to settle.
    Just be certain that the RAM you buy is designed to work with
    your computer. The major vendors of RAM (by example, Crucial, Kingston, Corsair)
    have RAM selectors on their web sites that make it easy to find the
    good memory for your computer.

    Another response to community focus group Windows XP

  • Upgrade CPU laptop CQ60-211DX

    I have a CQ60-211DX laptop.  It uses a processor Intel Celeron 585 2.16 GHz core simple.  It is a processor Socket 9.

    I want to know if it is possible at this level to a processor Socket 9 better, such as the Pentium Dual Core or Core 2 Duo.  My main concern is what families of processor will support the motherboard.

    My research so far indicates that the Celeron has a max of 31W TDP.  The Pentium Dual Core T3200 (2.0 GHz) and T3400 (2.16 Ghz) have a max TDP of 35W and the Core 2 Duo has a maximum TDP of 10 w.  So, the Pentium Dual Core would generate a little more heat than the Celero, but I think he might be able to handle the additional 4W?  The Core 2 Duo, on the other hand, almost cold.

    The Celeron and Pentium have 1 MB of L2 cache, but the Core 2 Duo has 2 MB.  The Core 2 Duo has a pace much more slow clock (1.5 Ghz), but I understand that it is still faster than the Pentium with the effectiveness of the architecture.

    I don't know how the FSB affects things, but the Celeron and Pentium are 667 MHz while the Core 2 Dio is 533 MHz.

    There are several other statistics I do not understand.  A large part of the information I have just the pages that follow.  Also, I have confirmed with a representative of Intel Celeron 585 is, indeed, Socket P.

    http://Ark.Intel.com/compare.aspx?IDs=35583, 37160,33920,36681,

    http://Ark.Intel.com/search.aspx?q=socket%20P&t=ProductGroup

    http://Ark.Intel.com/ProductCollection.aspx?series=28964

    http://Ark.Intel.com/ProductCollection.aspx?series=23517

    It seems that Intel does not often stated that a processor is Socket P, but Sockets supported including the PPGA478 seems to be what I'm looking for.  Not entirely sure, though.  There seems to be the T7000 and T8000 T9000 series processors that support PPGA478, also.

    http://Ark.Intel.com/product.aspx?ID=27255&processor=T7200&spec-codes=SL9SF, SL9SL

    http://Ark.Intel.com/product.aspx?ID=27256&processor=T7400&spec-codes=SL9SE, SL9SK, SLGFJ, SLGFV

    http://Ark.Intel.com/product.aspx?ID=27257&processor=T7600&spec-codes=SL9SD, SL9SJ

    Although T8000 and T9000 models all have much higher FSB speeds.  Yet once again, I don't know enough to understand what effect this has on compatibility, so I guess I should stay with 667 MHz.

    Finally, I guess the U7000 series is more advanced than any of the T series, but other TPD and VID lower voltage max quantity, all other specs seem lower (FSB, clock speed, L2 cache memory).

    Soldering is not a problem.  I don't know if my processor is welded on or not (have not yet cracked open and will not until I know that it is worth), but even if this is the case, I have a soldering iron, solder Wick and the skills to remove the welding without damaging the components.

    So what I've been able to reconstruct so far.  If someone could let me know which processors can handle the motherboard on my laptop, I would really appreciate it.  If someone could suggest what processors would offer the best performance gain, would be great, too.

    Thank you!

    Luke

    Hello

    What follows is a listed one CPU upgrade CPU option for your product.

    Processor Mobile Intel Core 2 Duo T5850 - 2.16 GHz (Merom-MV, at 667 MHz front side bus, 2 MB cache level 2 total, taken Micro-FC-PGA, 35W TDP, 65nm)

    If you plan to upgrade limit you your purchase know CPU compatible and functional. This way you will save yourself the disappointment of an incompatible CPU installation.

    As notebook BIOS do not have many options tweakable, which disqualifies basically anything but what the manufacturer offers for upgrades in option.

    the CPU I have listed and linked to is probably the best you can do for your laptop.

    Kind regards

    ERICO

  • Installation Documaker 12.4 Enterprise Edition

    Installation Guide Doucmaker 12.4 Enterprise Edition says that - minimum hardware you need for a sandbox is - Windows Server 2008 x 64, Intel 2 Core 2.3 GHz x 64, 16 GB of RAM and 150 GB of hard drive. Which means that - DB, WebLogic, SOA and other previously required, all software will be installed on the same server. What is the only requirement for the sample / demo Version of the software available.

    This is the requirement for ODEE only. The other required components have their own requirements that must be met. Although it is possible to install all components on a single server, it is not recommended for anything other than the sandbox environments or development. The indicated conditions might work for an all-in-one, but you may need additional CPU or RAM.

  • CS6 installation does not finish / accidents

    Hello everyone,

    I have problems to install CS6 (Standard Design) on my ultrabook.

    The installation process seems to go on the property, but it stops at a certain point, this time at 54%. I tried several times, each time in a different position. And in addition, the installation process takes literally hours. I started as 6 hours ago.

    The installer sucks up to 35% of the CPU power constantly, so something has to happen. I don't see any progress.

    I already wiped everything clean with the cleaning of Adobe beforehand tool.

    Additional information: I want to install on an SD card that is mounted on the c: drive to make windows believe it is a normal directory. Should not be the problem that it worked in the past in the same way.

    Does anyone have any ideas?

    Thank you very much!

    Philipp

    System information, Setup logs:

    The problems with the Setup logs. CS5, CS5.5

    Generally speaking, however, it seems the worst way imaginable to install these software - 12 GB of software installation will take its time and using a device that itself is dependent on a very specific driver and physical parameters certainly does not help...

    Mylenium

  • CPU made 29 percent

    My cpu is at 29 percent, and I've scanned with malware bytes and essentials of security. any ideas how to solve this will be greatly appreciated. I run windows 7 on a dell Inspiron 537. Thank you.

    This CPU system there? It could be due to a low CPU power. My Netbook has to an Atom processor that can run along 10-20% idle apparently. My office with a more powerful processor works at a much lower rate when idle apparently.

    If you have scanned with associated MWB and MSE (both set to day of course) its unlikely to be malicious. Then take a look in the Task Manager with the right button of the taskbar and click "Start Task Manager" or press altogether for the throw.

    Then, in the Task Manager, click the tab. Then click "Show processes from all users" and enter your administrator password if prompted. Then click on the CPU column for the use of processes in order to low high CPU from the list.

    A few albums in the list will show you what is running and using your CPU. If the system is idle, "System Idle Process" should probably be at the top of the list. Running Manager tasks if he has to use additional CPU you should see that in the list of institutions.

  • Adding a CPU of ESX server

    Hi all

    My apologies if this was asked before. We will install an additional CPU in one of our servers running VMware vSphere Essentials 5, more. The type of server is an HP DL360 G6.

    Problem is that we are only licensed for one physical processor. I'm not sure how to obtain additional licenses for additional CPU, and I don't know how to do in this regard. Can install us safely the additional CPU it will affect the virtual machines? Take the license sorted first before even to consider installing the CPU?

    If anyone can shed some light, I would appreciate it.

    The license stops the use of this additional cpu so I recommend the licensing update. If you talk to your VMware/TAM dealer they can update your not licenses for you, no problem

    Gregg

Maybe you are looking for

  • Is it possible to disable iTunes12 shuffle, permanently?

    Is it possible to disable iTunes12 shuffle, permanently?  Or at least a button to turn it off for the entire library once it opens?

  • I would add the extension QuickJava 2.0?

    When I opened Firefox today, an open tab (http://quickjavaplugin.blogspot.com/2013/09/quickjava-20.html) recommending that I add the QuickJava 2.0 extension. Is - this ok/safe?

  • problem with firefox display 11

    I installed Firefox 11.o today. Since then the view with the browser is all wrong. See the link below Screenshot

  • Vista 64 just keeps freezing randomly

    I bought a new laptop and it came with pre installed Vista Home premium 64-bit with SP1. The information system is the chipset Intel GM45, integrated graphics, 4 GB of RAM and 320 hard drive. The system hangs at random without error regardless of wha

  • Aspire 5100 restore options?

    I have an Aspire 5100 aging with its D drive that contains a full restoration required once only 2 DVD, but he now has 7. As I've never had the need to use both methods, I'm looking for other means of external restoration to save the use of DVDs. An