3 pages by using the same basic shape, but 2 are not mobile friendly? -Muse

Similar Questions

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• The KDL-40VL160 and 46VL160 use the same basic position?

  I bought some time ago the 40 that is is attached to a wall mount, but now need a piece of furniture. I found one on eBay, but there is also a stand for 46, which is significantly cheaper.

  Thank you for coming back to us. The KDL40VL160 and the KDL46VL160 have different stands of table top. It would be preferable to use the support of table top which is recommended, or which is supplied with the KDL40VL160.

• BlackBerry Z3 can I create a Blackberry ID using the same email address, but with a different password?

  I use 2 phones and I am ready to create a new blackberry on the 2nd ID, but it requires an email address and I don't have that one email address that I use for everything. I want to know if it is possible to create a new BBID with the same e-mail address but different password. The main thing is I want both phones to be active and fully functional, but I don't have a single address email and I prefer not to create another email address, because I love all of my emails in one place rather then having 2 email addresses. I don't want any phone be disabled. I do not fear one of the BBM is turned off, as long as at least one works. Both phones are a Blackberry Curve 9320 and a Blackberry z10, which is one waiting to be activated.

  No this is not possible. The BBID, you use is associated with the device, you are using, the e-mail address is the user and cannot be associated with two BlackBerry smartphones to consider it time of the password.

  I suggest that you create a new e-mail address for the sole purpose of using it as a BlackBerry ID.

  www.bbid.com

• BlackBerry Z10 can I create a Blackberry ID using the same email address, but with a different password?

  I use 2 phones and I am ready to create a new blackberry on the 2nd ID, but it requires an email address and I don't have that one email address that I use for everything. I want to know if it is possible to create a new BBID with the same e-mail address but different password. The main thing is I want both phones to be active and fully functional, but I don't have a single address email and I prefer not to create another email address, because I love all of my emails in one place rather then having 2 email addresses. I don't want any phone be disabled. I do not fear one of the BBM is turned off, as long as at least one works. Both phones are a Blackberry Curve 9320 and a Blackberry z10, which is one waiting to be activated.

  No this is not possible, the e-mail address you used your BBID, is associated with the device that you use it on. It is also the BBID username. And cannot be used on another device, no matter that there is a different password.

  I suggest that you create a new e-mail account, just for the sole purpose of using it as a BBID.

  www.bbid.com

• Is it possible to use the same file twice, but have different layers power when I use it?

  

  I have this card and I want to have a zoom in the part that displays the residential street names, but of course I don't want the names of streets on the large version of the map. Without creating two different files can I activate these layers to the map zoomed in the corner and keep them to the enlarged map? Or is there a different way I should go about it?

  The reasoning to want a single file is because the streets and points of interest are evolving, it would be frustrating to manually change the street name of each file, as time passes and things could eventually be forgotten. Have a main file would eliminate errors or inconsistencies between two files.

  Card has been designed using InDesign in Illustrator and has.

  in indesign, make a right click on the image linked and select 'object layer Options.

• My paragraphs different although they share the same style. Paragraph styles are not uniform

  Hello.

  I try to get my paragraph styles to all be uniform. I have imported a model and have several text boxes on several pages. I've deleted almost all paragraph styles to start again. But for some reason, the style that I want to use is in 1 box of text, and then in all the other text boxes, it's a different style. I created a new style, but when I click on it when the text is highlights, it changes, but does not seem this area of a text game.

  Any help is appreciated.

  There is the problem - your text has resized with the text boxes; It's showing the size and the size of acutal. To fix, use the menu at the top right of the window to InDesign and for each text box, reset scaling to 100%. You must delete the replacements again.

  See this thread for more information

  http://forums.Adobe.com/message/3392608#3392608

• Impossible to use the webcam with Skype, but it is not detected

  webcam problems

  built in cam, but when I try to Skype it says it is not detected?... don't know if it's my Skype or my comp sumone... does know?

  A moderator has moved this thread to Windows for the hardware and drivers Forum

  Hi, Twyla,

  Is everything up to date?  Drivers, etc...?

  Open Windows Event Viewer. Access custom views-> administrative events. Search for recent error messages. Click on all errors and view the details here if they time things fail.

  Try this Fixit M.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Controls graphics issues

  http://community.Skype.com/T5/idea-garage/TheUberOverLord-video-issues-checks/TD-p/156710

• The update of creative cloud worked for Photoshop.  However, it shows my LR 5.4 'up-to-date' and the CC version will not load.  Advice has been uninstall LR using the program uninstall Adobe, but it does not exist on my iMac with the Mavericks.  I am supp

  Sorry for the long title.  I thought that I was actually asking.  Why can't I update my LR LR CC 5.4?  I have an iMac 27-inch running the Mavericks.  I have a lot of space on my hard drive and have 16 GB of RAM.

  Long titles seem to happen a lot since the last forum updated software isn't just you!

  There is no CC Lightroom. You get the latest version (currently 5.4) with creative cloud, and the CC app so right to say that your LR is up-to-date. Unlike most other Cloud creative applications and Photoshop, Lightroom is not labelled as 'CC' because it is also available separately as a product standalone perpetual license. When 5.5 (or 6.0 - or even a CC version only) is available in the future, the CC app should invite you to update, and then in the meantime, you good to go.

  M

• How to have a video preview of the SET (basic question but its does not work)

  Hello

  Ive been playing with this for more than 2 hours and I cannot for the life of me figure out how to get an overview of the full video. All I can get are the clips. When I click on the source tab it only allows me to select individual items not the entire track. How on Earth to view the entire video?

  Thank you!

  And for bonus points, is there a way to slim down the sides of the video (there are black bars in the native file) and render it again it? For example to change a video from 720 x 480 to 720 x 380, but not shrink from the whole of the file, but rather to cut the sides (Sony Vegas can do this Im wondering if the first can too)

  This format/Frame Size would dictate a Desktop Preset to match. I would create such a sequence, and then just do a Ctrl + A (select all), Ctrl + C (copy), move to the new, correct sequence, target tracks, the ICT value 00. 00; 00; 00, and then Ctrl + V (paste). No, you should now have all the black bars.

  Good luck

  Hunt

• Is compatible with Lightroom 6 Lightroom 5 catalog? In addition, Lightroom CC 2015 and Lightroom 6 can use the same catalog?

  I am a current user of Lightroom 5.7 - I bought and installed 6 of Lightroom, but have not launched the program again - will be LR 6 make changes to my catalog LR 5, such that it cannot be used in LR5?

  In addition, LR6 and LR CC 2015 can share the same catalog?

  Lightroom 6 will require a database update are in the catalog format. When you start Lightroom 6 once you have it installed, it will prompt you to update your catalog. This will create a new copy of your catalog in the new format, leaving your Lightroom 5 intact and usable catalog if you have installed Lightroom 5. 6 of Lightroom and Lightroom CC may use the same catalog. But they may not share the same catalog as this catalogue must be installed locally on both computers. The Lightroom catalog cannot be placed on a network drive.

• Can I install 2 copies of Windows 7 on the same PC in a dual-boot configuration (using the same license key)?

  I just bought Windows 7 Home Premium Upgrade Family Pack, with 3 upgrade licenses.

  I update my 3 PCs at the House Windows XP to Windows 7.

  I double on 2 of these PCs, boot Windows XP (for me, one for my wife) on different partitions. the two Windows installs fine activated using the same license (probably because they are on the same physical computer with the same hardware, and only 1 instance of Windows XP can be used at a time).

  I like to create 2 different partitions, and install Windows on each and choose the one that start when I boot. It worked well in Windows XP. Can I do this with my new Windows 7 Family Pack?

  My final configuration would have 1 PC with 1 partition and a new update to Win 7; and 2 PCs each dual-boot using the other 2 licenses.

  Please calm down, the question is not so complicated (if you read the operating instructions / first license agreements).

  (1) If you want to cancel an upgrade and return to your old system under license (XP), you can do it. You can not use XP anymore, If you upgrade. But if you come back that the State of origin, you will have the same license as before.

  (2) with your Family Pack, you can spend 3 PC to Windows 7. 3 upgrade licenses = 3 licenses to upgrade. It's an interesting idea to use it to "5 installed on different partitions 5" because two of them are "on the same physical PC." However, you should know the rule "1 license is 1 pc." You use not here too artificial.

  "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• How can I use the same ebook on my PC and the android device. I use the same ID of ADE

  can I use the same ebook on my PC and the android device. I use the same ID of ADE

  can I use the same ebook on my PC and the android device. I use the same ID of ADE

  Its not automatic download. At the moment seems to only work for devices Mobile for the version of office for the epub files. If you want the same eBook on different devices, you need to download on all devices, or move the file to the file system after connect your phone to your device.

• How to create a report page by using the Web layout editor

  Hi Experts,

  I use wcc11.1.1.7, I need to create the report page by using the Web layout editor, but in this applet (editor), there are only 3 types of link to the page: local page, external page, query, it must be of type of the active report (historical), why I can't see them? y at - it components should I activate this?

  Best regards

  It doesn't have to be in the link on the Page, but in the Page Type.

  See the documentation for http://docs.oracle.com/cd/E28280_01/doc.1111/e26694/e02_weblayout_edit.htm#i1068085 for more details.

• Two headphones can use the same ports? Or is there an exception with RAC?

  I was under the impression that the two processes of the listener cannot use the same port. But, how to scan LISTENER_SCAN2 and LISTENER_SCAN3 headphones use the same port 1628 in the RAC hump178 node?
  
  
  

  $ srvctl config scan_listener
  SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1628
  SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1628
  SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1628
  
  
  
  $ srvctl STATUS SCAN_LISTENER
  SCAN Listener LISTENER_SCAN1 is enabled
  SCAN listener LISTENER_SCAN1 is running on node humpy179
  SCAN Listener LISTENER_SCAN2 is enabled
  SCAN listener LISTENER_SCAN2 is running on node humpy178
  SCAN Listener LISTENER_SCAN3 is enabled
  SCAN listener LISTENER_SCAN3 is running on node humpy178

  These 2 listeners, according to the ouput srvctl above runs on the humpy178 RAC node that has 1 single public IP address. It's just a normal (standard) 2 node RAC configuration.

  Listeners in cluster environment using virtual IP addresses.

  You can check it out yourself:

  lsnrctl status LISTENER_SCAN2
  lsnrctl status LISTENER_SCAN3