3 questions about encryption on the Z5

Similar Questions

• Question about encryption for a VPN established between two of our sites

  We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men.

  For an upcoming exam, the firm wanted to know what kind of security/encryption has been implemented between the two routers.  The engineer is no longer available, so I've went over our configuration files for each of the routers and will have questions about what to tell them (I'll be the first to admit that some of this stuff is over my head).

  I enclose the portions of the configs with "crypto" information he put in place.  If you see something wrong, or need something extra, let me know.

  Thanks in advance!

  That's what you use:

  Phase 1: 3DES, SHA1, PSK, Group2 DH (1024 bits), life time 86400 s

  Phase2: 3DES, SHA1

  Which is today considered legacy crypto, but probably nothing to worry. The crypto-config has always considered that there is "room for improvement"...

• where to post a question about iTunes on the iPhone?

  I have a question about a problem with iTunes on the iPhone (iOS), but I do not see a 'Community' with this title (or anything close;  I have no idea what "iTunes U" means).

  For lack of a better idea, I just posted to the community "iTunes for Mac", but I don't think that's true.

  Please let me know where I should post to an iTunes on iPhone issue.  Thank you.

  It should probably be posted in the community Using iPhone Apple Support communities. I'll ask a host spend your question in iTunes for Mac, if it has not already been moved.

  EDIT: Just read your message, and I think it's probably better where it is (because you need help syncing your songs via iTunes on your Mac). He should be fine here, but if the moderators believe that he should be somewhere else, they will move for you.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• Question about to browse the lines of a viewobject

  I want to iterate over the lines of a viewobject. So, I use the following code snippet to do:

          String amDef = "model.service.TestAM";
          String config = "TestAMLocal";
          ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
          ViewObject vo = am.findViewObject("EmployeesView1");
          RowSetIterator iterator = vo.createRowSetIterator(null);
          iterator.reset();
   while(iterator.hasNext())
          {
              Row currentRow = iterator.next();
    System.out.println("Value: " + currentRow.getAttribute(1));
          }        
          
   iterator.closeRowSetIterator();
   Configuration.releaseRootApplicationModule(am, true);
  

  Now, I had a question about this code snippet. He get all records from the table of data to the model layer, that is, to the application server? If so, what part of the code for this? vo.createRowSetIterator maybe?

  Your example of code appears that I wasn't there. The default iterator and one that you get by vo.createRowSetIterator are different.

  And do not forget to close the iterator, you created as you lose in other resources.

  Timo

• Question about backing up the Lenovo factory

  Hi, I have an E530, I have a question about the Lenovo factory back, I'm a little unsure of the difference between the bootable media and just backup data.

  Is the bootable media just the equivalent to a disk of windows 7?

  the option data backup all currently installed on your laptop?

  I tried with the two checked options the other day and I got to the point where he solicited for disc DVD - RW 6 so I cancelled because I didn't know how much in total he would do, would be nice if he told me so I could better prepare.

  Also, if I was ever to use the data disks, would you boot from the startup disk you did first then also boot from CD 1 of the data disks?

  Hi James,

  We create these disks to customers of all time.  In our case we have Win 7 Pro, pre-loaded.  Win 8 discs are already included with the device.

  The process of factory recovery disks will create a set of disks [the E530 in the USA, to 4 DVD - Yes it would be nice to know how much to advance] will allow you to restore your machine out of the box.  The first disc it creates is a boot disk - you start from this when you start the recovery process - that's all it is. No file data/images for the restore process.  Other disks contain image files needed for restoration.  This does not save the user data. It is a different process.

  Since you started & cancelled the process, I'm not sure that it will allow you to re - burning the discs.  Because of the MS license restrictions, you are allowed to burn discs once.  We got all the way on the last drive and had the process fail [we don't know why - maybe bad disc?] and we cannot redo records because he thinks that we have successfully created their.  So, we have to call Lenovo support and ask them to send us a set of disks in Windows 7.

  I hope this helps...

  Al

• Question about mismanagement of the effects in the construction of sequence

  Hi all
  
  I read the BPEL 2.0 document and met a question about management failures and the normal flow of control in the < sequence > construction.
  
  For example, in the following code fragment:
  
  <>sequence
  < call...
  < catch faultName = gt; a.
  < / call >
  < receive... >
  < / sequence >
  
  If fault one is taken and processed by error handler, when the fault handling ends at will are receive > activity start or jumped?
  
  According to the document: < receive > will begin when < call > complements, but the 'complete' includes the 'ends in vain", (i.e. a fault is stuck inside the < call > and dealt with)?
  
  Hope you can help me and thank you very much.
  
  Published by: user8301699 on April 9, 2009 19:04

  Hello

  You have reason, 'full' includes the 'ends in vain", (i.e. a fault is taken inside the and treated).

  Hope this answers your Q.

  See you soon
  Rémy Pucha

• Question about graphics on the Satellite A200-1VO card memory

  Hello
  How do you assign more memory to the graphics card on laptop Satellite A200-1V0?
  Thank you

  Hello

  in your case it s not possible to change the size of graphics by yourself, memory as graphics memory in your machine is shared with main memory, so if you upgrade main memory and graphics memory should increase. But this question is governed by the chipset and the user has no influence on it.

  Welcome them

• QUESTION about to connect the calling WinsCard.dll drive

  could not get the list of player and connect the player successfully by call winscard.dll under C:\Windows\system32 folder in my local PC, but the other PC could do that.

  My PC environment: 2002 XP, SP3
  the version of winscard.ll is August 4, 2008

  Hi Yang Yu,

  1. Is the issue with the computer recognizes the card reader or the card reader can't read the card?
  2. What is you receive the exact error message?
  3. What is the number and the model of the card reader?

  Refer to the article below and try the steps mentioned, if you use Windows XP Professional x 64 edition.

  A universal serial bus smart card reader that is connected to a Windows Server 2003-based computer may not detect the smart card

  http://support.Microsoft.com/kb/919922

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Question about vMAC on the DLR LIF

  Hello

  Based on the design of NSX Guide: "every LIF has assigned an IP address, which represents the default IP for the logical segment L2 bridge, it connects to a vMAC address. The IP address is obviously unique by LIF, then that same VMAC is attributed to all LIF defined"

  This test in the HOL laboratories, I started a ping from 172.16.10.11-> 172.16.20.11.  I configured a mirror port with source such as app-sr-01 a (172.16.20.11) (not available on servers web/app HOL tcpdump!). Looking at the MAC addresses on the package 'in' GRE encapsulated packet (see below cliché) I have a few questions:

  1. whence the source MAC on the 00:50:56:f1:f7:a2 of ICMP request packets? What cli command would show this MAC address?

  2. If each LIF must have the same vMAC, "arp - a" output on the corresponding servers shows different MACs for 10.1 and 20.1 LIF.  Is this expected or a Nested lab thing or did I miss something?

  

  1 MAC SRC in the query is almost certainly a pMAC for the ESXi server where the web-sv-01 has. You should be able to see in "net-vdr - C-l" running on this host.

  2. "arp - a" output for your web-sv-01 a don't look right, you should see VMAC (02:50:56:56:44:52) for all DLR LIF. What version of NSX do you use?

• Question about consumption on the Satellite A660-10W

  My A660-10W (new) was wrong and Toshiba (Mafil in Israel) has changed the hard drive.
  Now the computer acts differently that before when I got it like new.

  For example; and my question is:
  1. After about 15 minutes, it automatically goes into sleep mode.
  I understand that the setting can be changed, however I would like to know if this happens when something is running?
  either I left the WD external BACK-UP running, but he fell asleep...
  2. the same thing will happen if Im watching a movie, for example?

  Thank you

  Laptop can't handle in different way. I guess you are using the recovery of images (Toshiba original Win7) and parameters are exactly the same as before.
  # Yes, you can change it. Simply enter the change plan settings for the power plan that you use, and where you can change the time when the laptop should go to mode "Eve". You can also disable using Pétion NEVER.
  # I can't say with certainty, but on my computer laptop doesn t go "standby mode", when I watch the movie. Test it. Set for 2 minutes and put on a movie.

• Questions about some of the keys on the keyboard

  I have Windows 7 and some of the keys on the keyboard are unknown for me. I tried to get these stars, but I got about 30 different answers and didn't know we had the right answer.

  I have a Pavilion Elite HPE-450f

  The symbols following, unknown to me at the moment are 'Fn' next to the 'Ctrl' key on botton left; a symbol of the Crescent Moon on the "F2" key a left double-arrow on the F5; a symbol unique arrow right/pause press the F6; right double stop on the F7 and an arrow symbol on the F8 key. These are the only ones that I have questions on.

  Thanks in advance for your help.

  While pressing the fn key, the arrow keys serve as common controls of media player.

  FN more Moon puts the computer to sleep.

• Questions about registration of the catalogues, changes

  Hello-, I save all my pictures from LR and records to 2 back ups - each an external hard drive.

  I'll be getting a new hard drive installed in my laptop so will have to re - install LR.

  My question is: my ratings pictures, changes, cultures, folder names and important content of the catalogues will be on 2 external hard drives.

  I know that the photos are saved but wonder about the rest of the above - especially the catalogues.

  Group discussion thanks.

  kathyt. YYC

  One thing you want to make sure, is that you restore your photos from your backup disk has the EXACT structure of folders of your internal drive is now all of your photos are EXACTLY in the same place when restore you them.  This is very important!

  With regard to the sides, etc. This is in your catalog (LRCAT) file.  Copy your LRCAT file to your backup drives, and then restore the LRCAT file to the original location on your new internal drive.

• Have question about video of the Dell laptop...

  Dell Inspiron Laptop:

  Processor: Core i3 - 2350M

  RAM - 4 GB

  Graphics card: integrated Intel HD 3000

  It's weird. Some games that I can play with the medium or high settings with little or no problem. I know that this is not a portable game, but I only play games occasionally. I'm not talking about games here either. It runs Skyrim and Fallout: New Vegas without problem. In addition, it ran call of Duty: MW3 upstairs very smooth.

  The question is... can I allocate more memory on my video card? He said that the card can be a total memory approx. 1696 MB, but I know this isn't a 1.6 GB video card. I read some computers allow you to change the BIOS settings to add more memory, but I can't find anything. Im just surprised he plays these big games that he probably lag at least a little, but he can't play hitman: absolution of all and the video RAM minimum for this is 512 mb like Skyrim.

  Hi Shizam123,

  Thanks for the reply.

  There is no option in the BIOS to allocate more memory for the video card. Video card performance is optimized automatically during the game.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Question about volume adjust the volume knob - Satellite Pro U300

  Hello

  I have a problem with the volume control. When I adjust the volume using the button on the left side of the laptop, I can only choose 3 levels of "loudness":

  No volume, very quiet volume and maximum volume (from rabies).

  Is this normal, is not anyone have problems with this?
  I hope that the problem is because of the digital volume adjustment screw. The adjuster does not record the exact position of the volume button. Every time when I get a phone call at work (I listen to internet radio), I turn off the radio by using the adjustment screw on the side of the laptop. When I end the phone call, I always need to open the laptop and the volume on the windows task bar, because when I use the device volume control on the left side of the laptop, it will just immediately at maximum volume.

  Welcome them

  Hello

  It s very strange that your volume control contains only 3 levels of volume
  I noticed that Toshiba has released a new driver (v. 6.0.1.5473) sound on the European driver page.

  How about if the update driver sound?
  Audio driver certainly controls the volume sound and in my opinion it s worth a try.

  Good luck