3 the conditions

Similar Questions

• OSX EL CAPITAN UPDATE CANNOT BE INSTALLED TO THIS DISK. THIS VOLUME DOES NOT MEET THE CONDITIONS FOR THIS UPDATE

  Hi all

  My iMac features are:

  • 27-inch, late 2013
  • 3.2 GHz Intel Core i5 processor
  • 8 GB 1600 MHz DDR3 memory
  • Start drive Macintosh HD
  • NVIDIA GeForce GT 1024Mo of 755M graphics
  • Storage: 301,35 free GB of 999,35 GB

  Running currently on OS X El Capitan with Update Version 10.11.3 installed January 27, 2016

  Problem: I was on the purchase of 2016 Office for Mac and tried to install the update of El Capitan OS X 10.11.1 which is necessary to solve the problems with this version of Microsoft Office.  During installation, the following error message appears:

  "OS X El Capitan update cannot be installed on this drive. This volume does not meet the conditions required for this update".

  I would be very happy if someone can help me in installing this update.

  Thank you.

  Slpm6

  I just got a quick reply saying 'You are not allowed to create or update this content'. What should I do to solve the problem? Thank you.

  You are using a newer version of El Capitan that the updater contains and so cannot install it.

  (139598)

• Ignore the condition AVERAGEIF referenced cell is empty?

  I'm trying to run an AVERAGEIF function based on up to 3 sets of test values whose conditions are determined by the entries in cells referenced in the formula.

  Here is a picture of the table:

  

  Seminar, day and hour are the columns from the drop-down list. Registered average and average archived have AVERAGEIF formulas that use the data in the table another as test values that resolves as true when they correspond to data in the corresponding cells of the seminar, day and hour [example: IFERROR (AVERAGEIF (seminar, Schedule::Registered, $Topic, $A2, $Days, $B2, hourly seminars: $B, $C2),' ')]. This set works fine if I have all three of the cells in the columns of seminar, day and time information, but I would like to also see average which which do not take into account (i.e., what are the averages for what seminar is offered Monday, regardless of what time?). Is it possible to get these formulas to ignore the conditions that are left in white?

  Thank you!

  AVERAGEIF accept them * and? wildcard characters.  You could try to enter * in the Time column and see if your formula returns desired results.  Without seeing the data format in your time table of the seminars, however, it is difficult to know if you need to make other adjustments to make it work.

  For example, you use Date & time format of data?  If so, numbers actually stores a date and time, even if you have a cell that is formatted to display only the time. This can give results, that you are not pregnant if you do not have two cells showing that same time can be interpreted by the numbers as being different, because the part of associated of the date string date and hour is different.

  SG

• Bug in the conditional for loop with an array empty

  There seems to be a bug in the loop with a conditional terminal.

  If an empty array is connected to an indexed table auto entry tunnel, a tunnel of output array has an element instead of zero.

  

  The constant matrix is left empty.

  High loop without the conditional Terminal produces an empty array.

  Conditional down with a terminal loop never true generates an array containing a single element

  Thanks to LabVIEW version 8.5

  
  

• case structure: to run once when the condition is true

  I have a case structure in my program. I use this to count the number of cycles in my experience. I have a knot of feedback (image of the program here attaced) within a box structure. I want the case structure to run only ONCE when the condition is "TRUE". Each "TRUE" represents each cycle. The problem that I'm facing here is that the box structure is permanently running as long as it is 'TRUE' instead of running once and wait for the next 'TRUE '.

  Temporaritly I use a timer inside (as you can see in the picture) to contain the program for the next 'REAL' to come. I hold as by case so I know exactly the time. Is it possible to make the case structure running only once when the condition become ' TRUE and wait for the next "REAL"?  OR is there any other loop that case structure that make this work?

  Hi aneps,

  PtByPt_BooleanCrossing is your friend!

  You really need to work on the analysis/description of your problem: you don't want to run the case as long as the entry is set to TRUE, but you want to run the case at the entrance of the past from FALSE to TRUE!

• The condition of the Terminal loop in a wiring SCTL

  Hi all.

  I'm relatively new to LabVIEW, and I have a little doubt with a Terminal loop condition which I think is pretty basic. When using a while loop, the VI breaks if there is no condition connected to the Terminal, even if it is a constant t. The same is also pretty explicitly mentioned hereand I think that makes perfect sense.

  Now, I am interested in some code LabVIEW FPGA on a forum post that I was living to understand better SCTLs (only the attached photo is NOT my own code, credits to Mahesh0459), and the conditional terminal in the SCTLs does not seem to be wired. When I watched the video that introduced this concept, loop a while turns out be replaced directly with a SCTL, whereupon the F constant (since the while loop) is automatically connected to the Terminal.

  So, my question is this: is it a good idea to leave the condition of the Terminal loop unwired in an FPGA VI? If so, what is the reason? Alternatively, is this SCTLs-specific behavior? If so, again, what is the reason?

  Thank you!

  Only in FPGA is fine.  The reason being that it is assumed the loop will only run for always in the material.  No no not the loop control registers some doors.

• Prevent the child class dependency when the conditional use disable to specify the class in the development environment

  Hello

  I develop an application that I want to run on the normal systems and in real time using LabVIEW Proffesional Development System 2012 SP1

  To control how the application interacts with the user, I created a class that defines the type of user interface behavior that should allow me to have nice dialog boxes when the system is running on a machine windows and no dialog box (or any other friendly code in non-real time) if they sail on a real-time target.

  The parent class is the code that suits the actual time and the class of the child is the one with dialog boxes.

  To control the class of which it is responsible, I have a structure conditional disable. It works fine when the application is built in an executable or executable file in real time, but the problem arises when I want to use the code during development on the target in real time.

  I think that with the application under a target in real time (RT PXI), the proper case of the conditional - disable is enabled for the parent class is used, but the child classes are also listed under dependencies - I pressume it's because they exist on the block diagram in the case of persons disabled conditional turn off the diagram.

  This means that I can't deploy the code on the target in real time as it is unhappy with the class of the child code - even if it will never run.

  To save the poster my real project, I created an example with a Parent and child class and a flag to disable conditional 'class' to illustrate the problem.

  If you run Test.vi, you will see that the child class always gets locked (i.e. is addictive) while running even if it is not called.

  So - basically my question is: is what I can do about it or will I enough to disable it with conditionals and simply put the constant to correct class on the block diagram in the tests?

  Thanks in advance

  John.

  I feel your pain.  I came across something similar some time back.

  Apparently official NOR position is that you have to put a conditional structure of Disable IN EVERY ONE OF YOUR CLASS live.  In the Windows screws, you simply have a case of empty disable conditional with the windows code in another case and vice versa on the RT.

  I also much prefer the method you describe...

• I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed.

  Original title: I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.

  I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.  I'm I did somenthing evil?

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with the installation of Windows Vista Service Pack 1.

  Please answer these questions:

  It shows in system properties?

  To open system properties:

  (a) click Start, right click on computer

  (b) click on properties

  (c) see if it shows Windows Vista with service pack 1 on windows edition.

  Hope the helps of information. We know if you need help. We will be happy to help you.

   

• Click on the button conditional and alert when the condition is not met

  Hello

  I have a problem with the click of a button; in my form when the user clicks on a button I have to run the True action only if an element has the value; otherwise I would show an alert message like "enter value < element >...". ».

  It seems a simple problem, I tried to insert the condition "Is not null" and warning that the action of false, but it does not work.

  Who is the Apex way to solve?

  Thanks in advance.

  Cry

  1. replace the button URL type

  Code - javascript:validate();

  2. create a javascript function in the page function and declaration of global variables

  function validate()

  {

  If ($v ('YOUR_ITEM_NAME') == ")

  Alert ('XYZ');

  on the other

  Apex. Submit ('BUTTON_NAME');

  }

• How to define the condition in the analytic function

  Oracle 10g version

  Hi all

  I have the following data samples:

  Examples of data

  WITH DATA AS

  (

  SELECT 100 case_id, next_date, to_date('01-feb-2015','dd-mon-yyyy') UNION double, ALL crt_date to_date('01-jan-2015','dd-mon-yyyy')

  SELECT 100 case_id, next_date, to_date('01-mar-2015','dd-mon-yyyy') UNION double, ALL crt_date to_date('01-feb-2015','dd-mon-yyyy')

  SELECT 100 case_id, next_date, to_date('01-apr-2015','dd-mon-yyyy') UNION double, ALL crt_date to_date('01-may-2015','dd-mon-yyyy')

  SELECT 100 case_id, to_date('01-jun-2015','dd-mon-yyyy') next_date, to_date('01-apr-2015','dd-mon-yyyy') crt_date FROM dual

  )

  SELECT wagneur, MIN (next_date) OVER (PARTITION BY case_id) min_dt_analytical

  ,(

  SELECT MIN (next_date) DATA dd

  WHERE dd.case_id = d.case_id

  AND dd.next_date > crt_date

  ) min_dt_sub_query

  DATA d

  ;

  My question is that I get min_dt_sub_query using sub query but I want to use the analytical instead of query sub function so I created min_dt_analytical column, but I do not have how to give the condition that is AND dd.next_date > crt_date analytical so that I can get the same result as min_dt_sub_query data accordingly. Thanks in advance

  Concerning

  MIT

  Do not know if I understood your needs... but... something like that?

  WITH DATA AS (SELECT 100 case_id, next_date, to_date('01-feb-2015','dd-mon-yyyy') UNION double, ALL crt_date to_date('01-jan-2015','dd-mon-yyyy')

  SELECT the 100 case_id, next_date, to_date('01-mar-2015','dd-mon-yyyy') UNION double, ALL crt_date to_date('01-feb-2015','dd-mon-yyyy')

  SELECT the 100 case_id, next_date, to_date('01-apr-2015','dd-mon-yyyy') UNION double, ALL crt_date to_date('01-may-2015','dd-mon-yyyy')

  SELECT 100 case_id, next_date, to_date('01-apr-2015','dd-mon-yyyy') double crt_date to_date('01-jun-2015','dd-mon-yyyy'))

  SELECT d.

  MIN (next_date) OVER (PARTITION BY case_id) min_dt_analytical

  MIN(CASE WHEN next_date > crt_date THEN next_date ELSE NULL END) OVER (PARTITION BY case_id) AS min_dt_sub_query2

  DATA d;

  HTH

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• Is it possible for an index that includes the condition 'GOLD '?

  Hello, I have a few questions.

  The test was conducted in the following procedure.

  ################################
  create table test
  (
  VARCHAR2 (10) C1.
  C2 varchar2 (10),
  key (c1) elementary school

  );

  create index test_idx1 on test (c2);

  Command > explain select * test where c1 = 'JOHN' or c2 = "JOHN";

  Query optimizer plan:

  STEP: 1
  LEVEL: 1
  OPERATION: RowLkRangeScan
  TABLENAME: TEST
  IXNAME: TEST
  CONDITION INDEX: < NULL >
  NOT INDEXED: TEST. C2 = 'JOHN' OR TEST. C1 = 'LUCY '.

  Command >

  
  Command > explain select * test where c1 = 'LUCY' and c2 = "ABDELLAH.

  Query optimizer plan:

  STEP: 1
  LEVEL: 1
  OPERATION: RowLkRangeScan
  TABLENAME: TEST
  IXNAME: TEST
  INDEXED CONDITION: TEST. C1 = 'ABDELLAH.
  NOT INDEXED: TEST. C2 = "ABDELLAH.

  Command >
  ################################

  By adding the status of "GOLD" in this test does not use the index.

  Is it possible for an index that includes the condition 'GOLD '?

  Thank you.

  GooGyum.

  A database can generally use indexes in this way for one 'or' with two different columns. However, for this example specific can easily rewrite the query using 'UNION' to use the relevant hints while still giving the same result (correct):

  Command > explain select * from t1 test where t1.c1 = 'LUCY' union select * test t2 where t2.c2 = "JOHN";

  Query optimizer plan:

  STEP: 1

  LEVEL: 1

  OPERATION: RowLkRangeScan

  TABLENAME: TEST

  IXNAME: TEST

  INDEXED CONDITION: T1. C1 = 'ABDELLAH.

  NOT INDEXED:

  STEP: 2

  LEVEL: 2

  OPERATION: RowLkRangeScan

  TABLENAME: TEST

  IXNAME: TEST_IDX2

  INDEXED CONDITION: T2. C2 = "ABDELLAH.

  NOT INDEXED:

  STEP: 3

  LEVEL: 1

  OPERATION: OrderBy

  TABLE_NAME:

  IXNAME:

  INDEXED CONDITION:

  NOT INDEXED:

  STEP: 4

  LEVEL: 2

  OPERATION: UnionMergeSort

  TABLE_NAME:

  IXNAME:

  INDEXED CONDITION:

  NOT INDEXED:

  Maybe you can apply something similar? If you know that there is no possibility of duplicate lines then you can optimize it (in terms of performance) by using UNION all.

  Chris

• I want to know the differences between the conditions of subscription and use of Photoshop for photographers of the usual subscription?

  Nice day! I want to know the differences between the conditions of subscription and use of Photoshop for photographers of the usual subscription? And if I can buy then and for how Adobe Illustrator? What will be the beta of the Adobe XD for Windows? Thank you!

  If you ask what is the difference between photographic subscription and the subscription of stand-alone application, then the answer is both are essentially the same except for two ways. The photographic edition comes with Adobe Lightroom and 2 GB of cloud storage. The stand-alone Photoshop version comes on its own, but with 20 GB of cloud storage and is two times more expensive. If the 18 GB of cloud storage is an additional value, I would say probably no - put the money that you save on an external hard drive in place. The photographic edition was initially a temporary special offer caused a suggestion from one of the co-creators of Photoshop, but turned out to be very popular with fans, private and business and so we have a permanent plan to subscribe to Photoshop. There is no plan equivalent to Illustrator and who is available at a single price. With the subscription model, you can cancel at any time, but the contract is 1 year, if you cancel at the beginning there is a penalty clause which will ask you to pay extra this tax applies only if you pay your monthly subscription every year.

  You don't say where in the world you are, but the link below shows the available plans. There is a drop down box that allows the conversion in different currencies.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Hope that helps.

  Terri

• e-mail when the condition meets

  Hello

  I have managed to get the code for the e-mail to a user, but I want to know where I can put the condition if it meets the specific condition for only then email? In addition, can I get the results in the body of the email also?

  DECLARE

  v_From VARCHAR2 (80): = ' [email protected] ';

  v_Recipient VARCHAR2 (80): = ' [email protected] ';

  v_Subject VARCHAR2 (80): = 'High CPU;

  v_Mail_Host VARCHAR2 (30): = 'server ';

  v_Mail_Conn utl_smtp. Connection;

  CRLF VARCHAR2 (2): = Chr (13) | Chr (10);

  BEGIN

  v_Mail_Conn: = utl_smtp. Open_Connection (v_Mail_Host, 25);

  UTL_SMTP. HELO (v_Mail_Conn, v_Mail_Host);

  UTL_SMTP. Mail (v_Mail_Conn, v_From);

  UTL_SMTP. RCPT (v_Mail_Conn, v_Recipient);

  UTL_SMTP. Data (v_Mail_Conn,

  ' Date: ' | TO_CHAR (sysdate, ' Dy, hh24:mi:ss DD month YYYY ') | CRLF.

  ' De : ' || v_From | CRLF.

  "Subject: ' |" v_Subject | CRLF.

  'To: '     || v_Recipient | CRLF.

  CRLF.

  "some text" | CRLF.    -Body of the message

  "more text of the message. CRLF

  );

  UTL_SMTP. Quit (v_mail_conn);

  EXCEPTION

  WHEN utl_smtp. Transient_Error or utl_smtp. Permanent_Error then

  raise_application_error (-20000, "cannot send an email: ' |") SQLERRM);

  END;

  /

  Thank you.

  Hello

  user8786417 wrote:

  I tired the code, but it has the following error:

  DECLARE

  v_From VARCHAR2 (80): = ' [email protected]';

  v_Recipient VARCHAR2 (80): = ' [email protected]';

  v_Subject VARCHAR2 (80): = 'High CPU;

  v_Mail_Host VARCHAR2 (30): = 'server ';

  v_Mail_Conn utl_smtp. Connection;

  CRLF VARCHAR2 (2): = Chr (13) | Chr (10);

  num_found PLS_INTEGER;

  BEGIN

  SELECT COUNT (*)

  IN num_found

  Select *.

  of CSD_CALL_RATING;

  IF num_found > 0

  THEN

  v_Mail_Conn: = utl_smtp. Open_Connection (v_Mail_Host, 25);

  UTL_SMTP. HELO (v_Mail_Conn, v_Mail_Host);

  UTL_SMTP. Mail (v_Mail_Conn, v_From);

  UTL_SMTP. RCPT (v_Mail_Conn, v_Recipient);

  UTL_SMTP. Data (v_Mail_Conn,

  ' Date: ' | TO_CHAR (sysdate, ' Dy, hh24:mi:ss DD month YYYY ') | CRLF.

  ' De : ' || v_From | CRLF.

  "Subject: ' |" v_Subject | CRLF.

  'To: '     || v_Recipient | CRLF.

  CRLF.

  "some text" | CRLF.    -Body of the message

  num_found | 'lines of qualification found in another_table "| CRLC |

  "more text of the message. CRLF

  );

  UTL_SMTP. Quit (v_mail_conn);

  END IF;

  END;

  Error on line 1

  ORA-06550: line 11, column 21:

  PL/SQL: ORA-00923: KEYWORD not found where expected.

  It's one of these error messages that actually means what he says.

  Each SELECT keyword must be followed by exactly 1 FROM keyword, like this:

  SELECT  COUNT (*)

  IN num_found

  FROM another_table

  WHERE the cpu > = 100;

  In your code, you have the statement following (or the compiler will treat this as a single statement because he has only a semicolon):

  SELECT  COUNT (*)

  IN num_found

  Select *.

  de CSD_CALL_RATING;

  It is 2 SELECT keywords but only FROM 1.

  In addition, whenever you SELECT in PL/SQL, youhave to specify what you will do with the results (e.g., SELECT... ( IN).

  How to fix the code depends on what you want to do.  I don't know what you want to do, so I can't help much.

• Where to write the condition in the design of workflows with conditional step?

  
  Hello

  Again, I wish BP and workflow with contitional design stage.

  I had designed BP and workflow.

  As directed by the user for Udesigner guide, I had added trigger before the condition step.

  But I do not understand where to set the Condition to test?

  If I need to write the condition in triggering elemt itsel... How to proceed?

  for example, I want to write the condition as cost of Tota > = 100000, it must follow a path and if fails to another path.

  The conditions of triggers are specified in the workflow settings.  After you have created a new configuration, open it and click on the settings tab.  You will see a tree structure of the workflow with conditional branches.  Click a conditional branch to set the parameters for the trigger for this route condition.

• Can I use the photos for plastic surgery? What are the conditions for medical use? How can I chat with someone?

  I need photo stock for communication online for a society of plastic surgery. Use the faces and the recognizable body parts?

  What are the conditions? What plan I have in case I can use photos?

  I would really like to chat with someone from Adobe, but I couldn't find the option.

  Thank you!

  ... AND you can find it too https://helpx.adobe.com/stock/faq.html > Common Questions, Adobe Stock > Stock of Adobe for companies

  If necessary and for other issues, click on the http://helpx.adobe.com/contact.html 'until you get to 'cat'. If it is 'open' (ago opening hours) Please use it, I personally had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

  Hans-Günter