32 registers is not found or corrupted!

Similar Questions

• Satellite M70 151: message: not found or corrupt ntoskrnl.exe

  Hello

  Since I am not native English, I try to explain my problem as exactly as possible:

  I've used this laptop for XP Prof. two days there are about 1 1/2 years, I did my full weekly
  all partitions with acronis true image backup.

  Yesterday, I had the following problem:
  BIOS showed RAM, HDD etc work, and then I thought: 'not found ntoskrnl.exe or damaged, please install '.
  a new copy"wow...

  The same in safe mode. My acronis rescue cd didn't start, a knoppix and linux cd does not start.
  and even trying to boot from my XP cd: 'error in txtsetp.sif, cannot continue. " BTW, all the
  CD dΘmarrez well on another xp laptop.

  Someone have an idea, or should I say goodbye to my laptop?

  Sincerely, Noelle

  [Edited by: admin]

  Hello

  might be possible that the RAM is faulty. Already tried a RAMtest with Memtest86? These things happen when the HARD or the RAM disk is defective. It sounds like a hardware problem, so I suggest you to bring your machine to an authorized service partner.
  Here is a link if you don t find a servicepartner:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
  (Toshiba support - global ASP Locator)

  Welcome and good luck

• HP p6740f - error Code - BIOHD4 Boot sector corrupted/Not found

  I have a HP p6740f running on windows 7 home premium 64-bit and I cannot start my PC. When I try to start my PC it tells me "Reboot and select proper boot device or Insert Boot media in selected boot device and press a key" but they do nothing. I checked the cables connected to the hard drive and the cable is connected and the motherboard are both closely connected. I put all my BIOS to default. I ran a diagnostic test and only failed when starting the test and received the code error BIOHD4 and said "WARNING: Boot sector corrupted/Not Found" and suggests that I have done a system restore and contact HP support. I have no CD recovery and when I try to run a recovery system on the start screen, nothing happens and sent it to me to reset and select proper boot device screen. Recently, I cleaned my CPU heatsink and the inside of my computer, but I don't think none of this have caused the problem.

  Try to contact the HP Customer Service asking for the 11NA1MRW603 HP Windows 7 64 b + Supp 3 Recovery Kit to your computer. Meanwhile, download Windows 7 Home Premium 64-bit Digital River, a Microsoft hosting partner. Once downloaded, burn the ISO on a DVD to create a Windows 7 bootable disc. Now try to boot the disk and repair the boot sector of your hard drive.

• SFC/SCANNOW RETURNED THAT HE FOUND SOME CORRUPTED FILES THAT IT COULD NOT FIX... IS THERE A FIX

  WINDOWS VISTA 32 149 GB 2 GB HOME PREMIUM

  ACER ASPIRE 5517-INTERNET EXPLORER 9

  I RAN SFC SCANNNOW AND HE CAME BACK WITH

  SFC FOUND FILES CORRUPTED, HE COULDN'T FIX IT PUT THE CBS RESULTS. LOG AND I FOUND I CAN'T READ BECAUSE OF THE AUTHORIZATION AND THE SIZE OF THE NOTEBOOK OPENS NOT MORE AND I CAN'T COPY AND PASTE

  IS THERE ANY WAY TO REPAIR WITH OUT S WHAT THEY ARE? AUTOMATED AS IN ALL THE?

  Hello

  You have received the wrong information to the other poster here.

  It has been said before on mistakes in this regard, but continues to post.

  You cannot run a repair to start from a Vista DVD installation

  Words, there isn't 'Repair your computer', who had already used this Option, you would find that it is a system system restore restart tool, command, prompt only.

  The other poster would like to read and learn something;

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Booting from a Vista DVD gives you the opportunity to do a startup repair, NOT fix corrupted operating system files.

  To do a repair installation upgrade with a Vista DVD get you in a RACE vista operating system.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Click under 'Further information' on this link to learn how to see what files may not be fixed, etc.

  http://support.Microsoft.com/kb/929833

  See you soon.

• Corrupt VM - vmdk merged and flat.vmdk, operating system not found

  I got a suspended virtual machine. I tried to reset it, he failed in this weird State and after 10 minutes it allowed me to turn on. The metadata files were missing when I scoured the data store. I saw a file flat.vmdk.

  So, I created the vmdk file by using the http://www.phdvirtual.com/wrapgenstub creator. Once I copied the hard file I created in the flat.vmdk folder, I could see the file merged into the store data as a virtual disk, earlier, it was just a file. My next step was I created a virtual machine with a similar name and serves the existing vmdk file disk that I merged just for her.

  I checked the size to match the original size of the disk. I get "not found operating system". I could make the progress of this community messages so far, so thank you VMware for this set up and if someone can help me here, that would be great.

  -DA

  Hello

  I could very well be that something was wrong. If you have the original file.  Try the guide described here

  http://communities.VMware.com/docs/doc-4040

  Lars Liljeroth

  -

• 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand

  When I try to go to my site, I get a blank screen and this message:

  Method not implemented

  GET to / not supported.

  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.

  Can someone help me fix this bug, please? Thank you!

  This problem may be caused by corrupted cookies or cookies that are blocked (check the permissions on the subject: permissions page).

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Please upgrade to the current version of Firefox 30.

  • Firefox > topic

  The version of Firefox you are currently running is no longer supported with security updates.

  • It is important to update Firefox and Add-ons to the latest version to get all security patches.

  You can find the full version of the current version of Firefox 30.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• Pavilion series 2100 p6: my computer says "operating system not found" Please help me

  I tried to reset my pc because my computer is very slow so I tried, during the reset there were times when he could not reset so I continued to do and then a message showed "an operating system not found. Try disconnecting all drives that do not contain an operating system". Please help me. I really don't much about computers. And I also had windows 10

  Juan8

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to the page of the product HP for your PC, it came not with preinstalled Win10.  THIS means that you have done the upgrade to Win10.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work.

  The problem you mentioned is usually due to one of two basic problems:
  (1) defective hard drive
  (2) damaged/missing bootloader files
  
  As to the first, please follow the instructions in this link to test your hard drive: http://support.hp.com/us-en/document/c00439024
  
  If that confirms that your drive has failed, then you will need to replace it.  Please report back if this is the case.
  
  As for the second, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• Pro 608: HP 608 Pro will not boot-Boot device not found

  I got my new Pro 608 and installed my software after upgrade to Windows 10. Do okay, but the next day, nothing works!

  Keep saying that Boot Device not found!

  Not sure but it could be HP shield encryption does not work well? now, he cannot read the HD? or HD shot?

  I tried to restore default - but still does not work. Now other bios diagnostics no longer work. That is to say he's corrupt!

  Tried to update the bios, but doesn't seem to work. The bios still say 7/2015. I tried to update the bios 9/2015. Also used 7/2015 bios, bios Diagnostics but still does not.  I use a USB port and a connector USB Belkin C - I think not that it really is booting from the USB key to install the Bios.  I set the Bios to activate the firmware-C update.

  Sue, the best thing you can do since it is a new Tablet is contact HP Support directly for warranty repair.

  Most likely, they will replace the unit.

  Contact HP worldwide | HP® official site

• ProBook 450 G2, core-i5: operating system not found

  Hello

  I expanded the partition of my C drive with force to upgrade to windows 10 since an iso file... then after restarting, I am facing the problem "an operating system is not found. Please remove storage external use... »

  I tried to boot from the start menu by pressing F9 while restarting, but no solution met! I also tried to boot from EFI file, but does not because no options that are there found.

  The disc is also OK, checked the BIOS settings option.
  
  Now what to do?

  Spoiler (Highlight to read)

  Asif_Ahmed_Joy

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the operating system not found since the Win10 Upgrade failed and tried to help.
  
  One of the things that happened during the upgrade:

  (1) it mostly completed but failed in the writing of the new boot loader files

  (2) it failed early in the upgrade, screw up your PC as well

  Allows to process 1) first - by recreating the bootloader files.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If this does not work, then we are on option 2) - which is not good news.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

  What will work restores your computer to its original factory state using HP recovery media.
  
  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.

• DVD on Satellite A100 player was not found - Code 39

  Bought a laptop Satellite A100-447, it was working perfectly until yesterday when the carpet * a DVD RAM UJ 850 s ATA drive is now not NOT FOUND!

  Error code Manager device is "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Help, please.

  Thank you

  Hello

  This problem sometimes occurs. It is related to incorrect registry entries.
  But today it's lucky you!

  Please check this forum thread. You will find a link to the Microsoft document that offers many solutions.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

• Portege M400 - no HARD drive not found during recovery "no found TMBR.

  Hello

  I am trying to reinstall my Toshiba Portege M400 146 provided with the original hard drive, but the recovery program will not accept that there is a record of hard work in the computer.

  I know the drive works as I have used on other computers to experiment with Windows 7, etc and in the computer Toshiba windows 7 (always on the HDD) will also begin to start, but planting them.

  The error message is that there is no record of hard work and the following text are in 2 command windows both with the title:

  X:\i386\systen32\cmd.exe

  * Error screen 1: *.

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JUC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04386R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  Error screen 2:

  Manage the RAID configuration.
  # Mode GET1 F
  # Flags 0 x 00 0x00 0x00
  # Flag1 is 0x00 no 'F '!
  Get the current status of RAID...
  RAID level = compatible RAID
  Status: Optimal
  Get the number of readers...
  X:\I386\System32 > _

  I also tried with other drives and the same problem persists.

  Anyone seen the same problem and found a solution?

  Berst cordially

  Hello

  Eventually the partitions that appear on the HARD disk is corrupted.
  I couldn't install the OS on my laptop because the partitions have been confues up, I don t know why, but I couldn't format the HARD drive using the recovery disk.

  Finally, I took the Windows XP disc and formatted the whole HARD drive and deleted all partitions on the HARD drive. Then I installed Windows XP by using the Microsoft disk.
  After that, I made the recovery disc and installed the operating system using the Toshiba disc.
  Then, it was possible to reinstall the OS.

  Notes; The M400 seems supported RAID and therefore, you need to install the RAID driver first!

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• Error operating system not found Message notebook Compaq Presario F700 {756CA}

  Hello, thank you for this forum!

  Record: Series of laptop HP Compaq Presario 700 {756CA} 32 Bit OS wireless

  ID # #ABC Serial # under the direction of the security KP027UA

  1 I used a service tech, as a gift, the Dec23/10 online. Problems occurred during the 5 hour session. PC was going well in advance.

  2 on PC Dec25 would not start. Operating system not found message that appears. Used F8, last known 5 times and it no longer works. Put into service on battery 4 times. It no longer works.

  3 a written tests HP for operating system not found {but was for XP and WIn2000}, with drive to test the hard drive. Message adjustment but

  other areas didn't have so not.

  4 related to Vista and Win 7. It's for the boot drive address not found Error Message.

  This message comes not so much waited and did as below.

  5 performed a full scan on MBAM, program no. threats 6 Ran Reimage and 2800 + corrupt or missing files found and repaired. This did not help and used the battery when you restart.

  7 when the open PC Windows updates were parties and 71 had to be installed. Had to use battery or reboot.

  8 new updates have shown, once again. Installed 8 and 1 failed. {Windows PowerShell 2.0 and 2.0 WNRM, optional}.  Could not start on more then ran battery test the boot drive HP fix error.  Test the Test of the Bios and the hard disk does not appear to work correctly according to the instructions, but normally open when you restart PC. I'm afraid to stop PC again.

  Questions: 1. can you please help with the BIOS and hard drive tests for my PC?

  2 HP support assistant has always shows failure of updates, analysis and data collection. Why?

  The downloaded program beginning Jan/11

  3 the event viewer displays error messages for updates and contact HP. examples: 134 CPU device breaks down... server windows could not start the process of some updates. What can we do? It comes after new updates.

  4 I want to uninstall the online tech company and all of its files, etc. Should I use REVO uninstaller. ? Windows Defender shows ports and exceptions for several parts of this program. I have to uncheck them?

  5 my adapter is bent at 45% s. This could be part of the problem?  The light is on.

  Your help is very appreciated. I'm at a loss and a user of learning with hours and hours of reading.

  Best regards, athome34

  athome34 wrote:

  Hi, thank you for having responded to my recovery options questions.

  Now, I realize that I did back up discs.

  Questions: 1 Will the Recovery on my PC option return it a 'new' State of the Vista operating system? Yes

  2 I'll Ineed to write important information from the. August 2010 back up? Yes

  3 Aug 2010 will save the files back of disks, programs and my Anti etc on my PC virus program? Must restore all the files and the settings. You must reinstall the anti-virus first.

  3 are Recvovery HP discs this duplicates what was first installed PC? Yes

  Thanks a lot for your help.  Congratulations!