DVD on Satellite A100 player was not found - Code 39

Similar Questions

• Satellite A100: operating system not found - error PXE - E61

  After turning on the machine (A100) the following text is displayed:

  Intel boot Agent FE v4.1.18

  PXE - E61: Media test failure, check cable of
  PXE - MOF: boot agent intel coming out
  operating system not found

  I can do or do I have to take it to the dealer for repair? Help, please.

  Hello

  I guess that something with your HARD drive is not really OK. An error message is displayed when the system is unable to boot from the CD/DVD-ROM or HARD disk.

  You have to imagine a sequence (called 'boot-sequence') where all devices that are bootable (such as disk, floppy, CD-ROM, NETWORK drive) are "checked" if some boot media or the program is present. Sequentially, the BIOS attempts to load the next available boot media.

  In the case of no current boot media, the system tries to finally boot from the network that doesn't work not because you´re not connected to a corporate network that has sometimes things network bootable... :)

  So, I suggest you to first check your BIOS (by pressing ESC, then F2) and check the "Boot sequence" if something has changed. Check if the HARD drive is located on the first entry, otherwise set it up. If so, then send your machine a partner / reseller/service because your machine then has a really serious problem.

  Greetings

• CD player is not found code 39

  I lost the way to use the CD player, I have CD ROM recovery, but these cannot be read I have XP Professional installed any help on how to change the Setup program to install the CD player again on my Satellite Pro 4300

  Hello

  I found this trick after googling a bit and it worked like a charm, my DVD burner is back.
  Give it a try:

  Run REGEDIT, open the following folders:
  HKEY_LOCAL_MACHINE
  SYSTEM
  CurrentControlSet
  Control
  Class
  {4D36E965-E325-11CE-BFC1-08002BE10318}

  After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
  "Upperfilters".
  'Lowerfilters '.

  Click on each of them, press DELETE, and then click YES.

  Analyze of new hardware in the Device Manager, it worked for me

  Good bye

• DVD player - "Application not found".

  Original title: dvd player

  Before I have to clean install windows 7, I backup my files using the creation of a new partition after windows 7 installed, if I double click on the DVD drive icon, it says "Application not found" it was opened by itself when I double click the icon of the DVD player, all the ideas of DVD player?

  

  Hello

  I suggest you try the steps suggested by Karena R from the following link:

  Application not found in DVD RW drive
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/application-not-found-in-DVD-RW-drive/f0f59a04-728a-4839-A187-45388423b2a7

  Note: The above applies to Windows 7.

  Post us the results after trying the steps above.

• every time I try to load it from the DVD the error appears as: "the application could not be started because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Original title: SPWIZENG.dll

  Hi, I got a cd of Windows 7 from my friend who is a software engineer so he gets all the programs (operating systems). It burned in a DVD instead of CD. So, every time I try to load from the DVD the error appears as:

  «The application failed to start because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Then when I click ok, it says:

  The file 'Autorun.dll' could not be loaded or is corrupt. Setup cannot continue.

  Help, please. I'm not good with computers and I honestly don't know what to do.

  Thanks in advance,

  :)

  Hello

  Are you able to play or open other CD or DVD?

  Step 1: These error messages may be due to corrupted media. Try to use the same media on another computer and check if you are able to use it.

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-upgrade-windows-7-error-code-0x7e/b1bfbe8f-7980-4847-a186-2206e87c6bc4

• View CD can't mistake of player Director, was not found in the object #getPropRef, Script error. Continue?, yes no

  OT: Error player Director, not found in the object #getPropRef, Script error. Continue?, Yes No. nursing student cannot run his CD CD practice to work on other laptops. but not on it!

  Nursing Student cannot carry out its practice CD which comes with Prentice Hall Nursing book: "medical and nursing care 2nd edition, comments & justifications surgical."  CD works on PC and a laptop running Windows XP, Vista and Windows 7 and on an iMac; but not on it!  She has a Toshiba laptop with Windows Vista Home Premium and it just doesn't work!  My wife has lent her one of its laptops with Windows Vista, but the CD works fine.  What is the problem? I called Prentice Hall and got no help from them!  They said it was a computer problem.  This student is an exchange student and she would really any help.  I tried to clean the system and even tried the Optimizer5.2 perfect for the correction of errors in Script, but it didn't work.  Help please!  My only recourse is to backup all files and wipe the disk clean and start again to do a reinstall of all applications.  Any other ideas?  She had the phone since 2005 and the hard drive has only about 30% free space left on 147 GB.

  Hello cobblestone47,

  1. What is the version of the steering drive you use on your computer?

  2. the other users who are able to play the CD using the Director or shockwave player player is

  Player de Macromedia Director is also known as the Shockwave Player. I suggest that you uninstall the Director player and install the latest version of Shockwave player, and check if you have the same problem.

  You can follow the link below to download and install the latest version of Shockwave player:

  http://get.Adobe.com/Shockwave/

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  Go to the Toshiba support site and search page of your PC/computer laptop.

  Download and then install the last set of specific drivers for W7.

  See you soon,.
  Jerry

• Microsoft XP blue screen and message - this applicationhas failed to start because LSASRY.dll was not found, that reinstallation can correct moyenessentiel,

  no disc recovery... on a Panasonic Toughbook CF-50

  Let's see...

  If you see a message like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because lsasrv WITH. DLL was not found.  Re-installing the application may fix this problem.

  Then, when you click OK, you have nothing more than a mobile mouse cursor.

  I seriously doubt that the opinion of the engineer of Microsoft Support for try the last good known Configuration will replace a missing file, so that theory approaches the area of ridicule.    This is not what LKGC, that is not what he does and is not how it works.

  Re-installation of XP is a very bad idea.

  There is also no need get a Windows XP installation CD, because you can create a bootable XP Recovery CD yourself and then see to replace the missing file.

  I understand not all next to a Microsoft representative.  Obviously not tested, won't work, won't help, but there are the necessary links to an article.   It's just another MSE wild-goose chase.

  The lsasrv.dll file should really never be missed, so answer these questions as the best yo can:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Then at the Recovery Console prompt enter orders to replace the missing file from backup copies that are already on your system:

  Copy c:\windows\system32\dllcache\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Depending on your system configuration, you may need to copy the files somewhere else, so if they are not in the folder dllcache for any reason, enter the command like this:

  Copy c:\windows\ServicePackFiles\i386\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Remove the CD and then type "exit" and restart your system.

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• "Stop: c0000135" and "winsrv was not found" error

  Hello:

  I'm working on my aunt's computer and she recently started having an error message when it tries to start his computer: "Stop: c0000135" and "winsrv was not found" error.  I can't start in safe mode because it just goes back to the blue screen and gives the same error.  She can't find the cd of 'restoration' and I can't find a windows XP CD created to boot from.  In addition, as info, she has not installed anything new recently.

  However, I have access to a Windows 7 Cd, but as I understand it, this doesn't help me as much as a windows 7 CD won't work on an XP operating system.

  I'm not very high technology, I just generally help solve problems by searching the Web for answers.

  Can someone offer me some very specific steps to get his computer facing up and running, please?  Also, before doing anything that is suggested as I can and I have to back up his hard drive?  If so, how can I do that without possibility to connect to the computer?

  Thanks in advance

  Hello

  You can download a Windows XP recovery console (ISO) by http://www.mediafire.com/?ueyyzfymmig CD image

  Once you have downloaded the files burning the image on CD. You can do this with a program like Imgburn. ImgBurn can be downloaded at http://www.imgburn.com/index.php?act=download.

  Once you have written the CD you must restart the PC and start the PC with the CD. To do this, you will need to change the boot order in the BIOS to start first with the CD player. To access the BIOS, usually press you on F2, F10 or DEL. (when you put the top PC tell XX press the button to enter Setup/BIOS). Once in the BIOS search the menu for something in the sense of "Boot Priority" or "First Boot Device" or "Boot Order". Once you've found the setting change so that the CD drive is the first boot device. Save the settings and exit the BIOS.

  Now you can start the PC with the CD. If you get the message press any key to boot from CD - press a key.

  After the Conference on Disarmament has started, you will get a menu on the screen. Press 'r' to enter the Recovery Console.

  Follow the instructions on the screen. You will receive a list of the Windows Installations. Press '1' to connect to the Master Installation of Windows.

  You will be asked to enter the administrator password. Enter it or leave empty if there is no password and press ENTER.

  You should now be on the command line C:\Windows >

  Now type in

  CHKDSK c:/r

  Press ENTER. Allow chkdsk repair disk errors, it can find.

  Once done type in

  CD system32

  Press ENTER. Now type in

  dllcache\winsrv.dll copy

  Press ENTER. You should see a response saying that the file has been copied. (If one of these commands give a type error in the error in your next post).

  If everything is successful in type

  Output

  and press ENTER. Remove the CD and allow Windows to start normally.

  It's always a good idea to make a backup of your important/emails etc documents before attempting to repair a PC (just in case something goes wrong). Because you do not have Windows, you will need to take the hard drive on your PC and attach it as a 2nd or slave hard drive on another PC work. This will allow you to see it as a drive E: or F: (or the next drive letter, it's free). You will then be able to copy the data on the hard drive of the computer to work.

  I hope this helps.

  Edit: Afterwards, I know you said, nothing has been installed recently, but you might want to look at this article: http://support.microsoft.com/kb/885523. The article describes the situation even after installation of SP2. Maybe the SP2 has been installed inadvertently through Windows update?

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• c0000135 Unable to locate component because rpcrt4.dll was not found.

  Hello

  I installed an antivirus program. Today, I tried to start my laptop and restart every time. I discovered that the error isc0000135 Unable to locate component because rpcrt4.dll was not found .

  I think that the antivirus has perhaps quarantined this .dll file. I have searched the Internet and found ways to solve it, but the problem is that I can't even get into my office in Mode safe.

  He cannot start somehow.

  Someone said to repair using the Windows XP CD, but my laptop is not the CD player.

  EDIT: Ok, so now I found on Acer eRecovery Management.

  He has the ability to restore the operating system. But the prob is now that I don't have enough space for the operation back up my files. There is an option to completely reformat, but I don't want that.

  I'm helpless now.

  Any help will be greatly appreciated.

  Hi kaixas,

  If you are not able to start the computer in normal mode or in Safe Mode, I don't know how you would back up your information.

  If you have no way to start the computer and no way to start the computer with the XP disc, you don't maybe not another option that recovery of the system.

  If you back up your information, you can ask a friend if they have an external hard drive orjump drive to save your backup on that connects via the USB port.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creed Assassin's for PC 2 - has failed to start because d3dx9_42.dll was not found.

  Just bought Assassins Creed 2 for PC, after installation, application could not start because d3dx9_42.dll was not found. This should have on the game disc or already on my computer. I am running windows vista and x 11 direct. Help, please!

  Try this. found the site of anoter.

  Resolution important note: not download the DLL d3dx9_42.dll individually from any "DLL download site. There are a number of excellent reasons that download dll of these sites is never a good idea.

  Note: If you have already downloaded d3dx9_42.dll from one of these sites to download DLL, remove it from everywhere where put you it and continue with the following steps.

  1. Restart your computer if you have not already done.

     D3dx9_42.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. Install the latest version of Microsoft DirectX. Chances are, the upgrade to the latest version of DirectX will fix the d3dx9_42.dll not found error.

     Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

     Note: The same installation of DirectX program works with all versions of Windows including Windows 7, Windows Vista, Windows XP and more. It will replace any missing file from DirectX 11, DirectX 9 or DirectX 10.

  3. Assuming that the latest version of Microsoft DirectX does not correct the d3dx9_42.dll error you receive, you are looking for a DirectX installer on your game or application DVD or CD. Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

     Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4. Uninstall the game or software program and then reinstall it again. Something could have happened to the files in the program work with d3dx9_42.dll and a reinstall might do the trick.
  5. Restore the file since the last software package DirectX d3dx9_42.dll. If the troubleshooting steps above have not worked to resolve your d3dx9_42.dll error, try to extract the d3dx9_42.dll individually from the downloadable package of DirectX.
  6. Update the drivers for your video card. Is it is not the most common way, in certain situations, updating the drivers for the video card in your computer may correct this problem of DirectX.

  MCP. MCDST. LVL 80

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• 1046: type was not found or is not a constant of compilation: [flashx.textLayout.elements]: IFormatResolver, error. Help?

  If im working on a project and this error keeps happening and I have no idea why. Does anyone know how can I fix? For now I was just opening an old version of the file and copy and paste my changes in it, but it is extremely time consuming and I was hoping that he could be another faster way around that. If someone could just tell me what could be the cause of what would be a great help.

  Im working in Flash CS6 with AS3

  1046: type was not found or is not a constant of compilation: [flashx.textLayout.elements]: IFormatResolver.

  Well by going to settings publish Flash I realized that everything what happened past the Flash version he published as Flash player 9 Flash player No 11.4. I went on it and the error message no longer appears.

  Thanks for your help Ned.