3490CT: need instructions instalation for Suse 10

Similar Questions

• Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

  Thank you for taking your time looking in my question.

  My Machine: Macbook Pro retina no Mid 2012

  What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

  My problem: everything works fine, but no sound. Drivers seem to be the cause:

  
  How I installed windows:

  1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

  2. Windows disk initialized and installed windows 8.1 64-bit without errors

  3 install the drivers for bootcamp support

  4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

  5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

  What I tried (all of the following are ineffective):

  1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

  2 reinstall the realtek drivers

  3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

  4 uninstallation of controller high definition Audio (it always seems to come back)

  5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

  I get the following error:

  

  6. place the ssd of windows in the main Bay

  7 troubleshooting sound (a 99% sure that this would not work)

  8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

  That I need clarification on:

  I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

  What I need instructions on:

  Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

  Thanks a lot again for your time and help!

  Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

  If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

• What do we need to install for Oracle forms

  Hello
  
  I installed Oracle Database 10 g Express edition. I want to learn Oracle Forms, what software do I need to install. I am running windows vista.
  
  Thank you
  
  porobashi
  
  Published by: user10603880 on November 30, 2008 09:48

  you need nothing else that installation of Oracle Developer Suite (more the database that you have already installed)
  Download from this link:
  http://www.Oracle.com/technology/software/products/IDs/htdocs/101202winsoft.html

• Need instruction how to install Windows XP on the Satellite A200-1AE

  Hello someone can write a statement of installation of Windows XP Professional on this laptop?
  What I need before instalation?

  I have a oryginal Windows XP. Drivers which I must have before? And what about the safe?

  I guess that my SATA drive PC and installation of XP does not support.
  Can I burn driver on the CD? Because I have no FDD.

  Thanks for help.

  You need instructions?
  Search this forum for similar discussions on this topic.
  You will find many threads!

  But here's a little tip;
  You must include the Intel matrix Storage Manager in the XP installation.
  Without the iMSM OS XP can't find HARD drive!

  The iMSM can be installed by using the USB FDD drive or you can create a new XP CD using the freeware tool called nLite.

  After the installation of the OS, you must download and install the drivers of Toshiba of the European driver Tosh page.

  PS: should check the driver installation instructions txt file before you start to install the Toshiba XP drivers

• I recently bought a new computer and need to install CS5 on my new computer.  Where can I find a download for this program?

  I recently bought a new computer and need to install CS5 on my new computer.  Where can I find a download for this program?

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Windows 7 64 bit and the need to install 32-bit and 64-bit client for Oracle 11 g

  Hello
  
  First of all, I'm sorry to ask what is probably a common response to the knowledge of most in the forum. I can't find a straight answer, the search of these forums or via google.
  
  We have Windows 7 64 - bit in our next update office. We have several Oracle databases, and all client software in our environment is 32-bit.
  
  I want to try to be at the forefront, so I want to deploy the latest version of the client 64 - bit 11 g instead of our current client (10 g 32-bit).
  
  The simple question is this: can we actually do with our suite of 32-bit applications or do I need to install the client for 32-bit to 32-bit applications side-by-side with the customer of Oracle 11 g 64 bit for future 64-bit clients?
  
  For the future that, if I do, then someone good instructions on this? I found an article about it, but it seemed personal and made use of the mklink command, so I have my doubts it is correct.
  
  Thank you

  I think that you need separate 64-bit and 32-bit clients

  HTH
  Srini

• I need to install antivirus for my macbook air?

  I need to install antivirus for my macbook air?

  Anti-virus software is not necessary on a Mac.

  OS X has several features that will keep your Mac securely integrated.

  http://www.Apple.com/OSX/what-is/security/

• K5N46AA: Need to install WIndows XP in K5N46AA driver of this network (110-511 IN) required for the same.

  Model - 110-511 IN

  Product no. - K5N46AA

  Following the compaitibility program problem, I installed WIndows XP. I so need driver network for the same thing for the other drivers, I can manage.

  Help, please

  Hello:

  Try the XP directly from Realtek ethernet driver.

  Download and install the 7 article on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

• Do I need to install and configure WiFi? (I just want to use it for my iPad on any TV for presentations in mirror)

  Do I need to install and configure WiFi? (I just want to use it for my iPad on any TV for presentations in mirror)

  Yes

• Need to install Service pack 3 for Vista to download my Zune player

  Just need to install Service pack 3 for Vista to complete my download to my Zune Player...

  Thank you

  LEA Shauna Toenniges

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  As you can see not SP3 for Vista.

  As you can see, the Zune Player requires XP with SP3 not Vista with Service Pack 3.

  Requirements for the Zune Player-

  http://www.Zune.NET/EN-AU/products/LearningCenter/zunesoftware/gettingstarted/pcreqs.htm

  Microsoft Windows 7 (all editions), Windows Vista (all editions), Windows XP with Service Pack 3 (home, professional, Tablet PC, or Media Center Edition 2005 with Rollup Update 2) or Mac OS X with Boot Camp running Windows 7 or Windows Vista.

  If you use a Windows 7 64-bit edition or Windows Vista, please click here to download the Zune software.

  Software Zune will not work on versions of Windows prior to Windows XP SP3, all the versions of 64-bit of Windows XP or any version of Windows Server.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  Hi, CPC,.

  Welcome to the Microsoft Answers Community!
   
  You must install Flight simulator on vista as well as Windows Xp and vista are two different operating systems.
   
  You log in to vista, you may not use any of the XP application and vice versa.
   
   
  Thank you, and in what concerns:
  Azeez Nadeem
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you

• I need the fix for win Xp Sp2 can install the HD Audio Device codec

  I need the fix for win Xp Sp2 can install the HD Audio Device codec!

  I has this fix and I lost it...

  It is contains (patch 3)

  can u please help me and give me the link of this hotfix

  Could be the fix. Looks like he helped other people with the same device.

  http://support.Microsoft.com/kb/888111

  If this isn't the case, I can continue to dig.

• Need help Re - installing Windows XP... I need instructions step by step

  I need to reinstall my Windows XP Home Edition and I need instructions step by step... Can someone direct me to an article with these step-by-step instructions? (I have seen this in the past somewhere on msn.com... but I have search and can't seem to find something close...) :(  Thank you...

  There is an official Microsoft guide for that: http://support.microsoft.com/kb/896526

  I hope this helps

• I'm building a Windows98SE virtual machine on a host OS to Windows XP Home using Virtual PC SP1 (with the fix for XP home). Do I need to install drivers for the emulated hardware?

  As I understand it, all hardware is emulated (that is, it 'sees' that which is emulated, not the physical hardware in my computer: sound card, motherboard, etc.), correct?  Here's my question: do I need to install the motherboard drivers, video drivers, or the audio drivers for the emulated stuff.  In other words, even if I have an Athlon XP 3000 + processor on an ASUS motherboard, do I need to install the drivers from the motherboard with the chipset emulated by Virtual PC?

  You have no need track down all the drivers.  They are installed automatically.

• Windows needs to install driver software for your DCC

  I installed the double mod. Windows Vista Ultimate & windows 8.1. When I started to pass on my laptop running windows Vista, it takes 5 minutes to open a session and message displays Windows needs to install driver software for your model of control abstract CDC (ACM)

  I don't understand how I can solve this problem.

  Thank you

  Try this link.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20driver%20SOFTWARE%20CDC%20abstract%20control%20model%20$ $ACM & ac = 5 #refinementChanges = & pageNumber = 1 & showMore = false

  In addition, with some PCs, you can select boot options, with dell, the F12 key to start the pc. Also, try this link for dual

  Starting the OS.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20pc%20startup&AC=6#refinementChanges=60&PageNumber=1&showMore=false