34xx/35xx version of the command 'show technical support '.
Recently started a new job and have different models PowerConnect, that I manage on my 6248 I've been able to use the command "Show support", but that does not work on my 35xx or 34xx series switches. Y at - it equivalent command? I tried to look in the manual, but was not able to find what I'm looking for.
On these switches, you will need to be more specific with the show commands. You can use # poster?, to see what commands are available.
The most used most frequent are:
# show running-config
# See the version
# show vlan
# See the spanning tree
# display arp
The CLI guides can help provide additional information about each show command.
Hope you find it useful.
Tags: Dell Switches
Similar Questions
-
No number in boxes highlight for the command "Show Numbers"
When you use the Windows speech recognition, the command "Show Numbers" will highlight all the actions available with a blue box, but there is no number in the blue box. The boxes highlight meet orders if I guess what number of the box can be. Any ideas why the numbers are missing?
When you use the Windows speech recognition, the command "Show Numbers" will highlight all the actions available with a blue box, but there is no number in the blue box. The boxes highlight meet orders if I guess what number of the box can be. Any ideas why the numbers are missing?
Just a guess, try a higher screen resolution.
-
Mobile version of the site shows the fill browser extended
I have a little problem with that I was wondering could someone be able to help me.
www.communitychestscpr.com/index.HML
www.communitychestscpr.com/Phone/index.html
on the mobile version of this site, I did, there are a few cases, home, rates and Contact, where the length of the page seems too long, where the site shows too much filling brower, and spans the length of the page for some reason.
Any thoughts on what could be the cause and how to fix it is welcome.
Kind regards.
I guess that there are blocks of empty text on the pages below the content that you are not able to see and they extend the height of the page. Can you open the pricing page and press Ctrl / command + a to select all, and then check if there are any this invisible frame that was left out by mistake.
Let me know what you find.
- Abhishek Maurya
-
"Show running-config" to show the output as 'technical support Show.
Hello
I was wondering if there was a command (maybe hidden in IOS) which would allow the release of 'show running-config' to hide passwords and SNMP community strings, a bit like when you perform a command "show support"? I'm trying to limit what a customer sees (using a GANYMEDE server +) and I just want to give them another command that would accomplish this goal. Any clue?
Thank you
neocec
a. Unfortunately not. You can use 'password encryption service' to encrypt your passwords. This way your passwords are not in clear text.
b. you can then activate levels of privilege to different users and restrict access to what a user can execute commands. For example, that a user cannot perform "show tech" or "show run" at all.
c. but in this way, you can view the output of a command completely, or restrict access to the command completely. We can not selectively display items of an output differently to different users.
d. you can also explore using the Protocol. SNMPv3 SNMPv3 provides a security model defining new concepts to replace username - old authentication community-based and provide the privacy of communication through encryption.
SID Chandrachud
TAC security solutions
Customer support engineer.
-
RegExp in the command 'show' in TCL scripts
I have an EEM applet that runs a command to show with regex that works very well. However, when I converted the applet to TCL, I am having some problems with it. It is throwing an error on the line below:
If [catch {cli_exec $cli1 (fd) ' execute sh | "}] section ip-list of prefixes []] + seq 5 permit $ip_prefix\.0\/24 "} _cli_result] {}"
error $_cli_result $errorInfo
}
TCL seems to be catching the part [^] show command and try a substitution (trying to run "^"as a separate order "). I could surround the show with brackets {} command but then $ip_prefix will not substitute for the value of the variable. Is it possible to run this show command in TCL? Thank you.
C819G - 4 G-V-K9 #tclsh
C819G - 4 G - V - K9 (tcl) #set ip_prefix 10.10.10
10.10.10
C819G - 4 G - V - K9 (tcl) #sh run | section ip-list of prefixes []] + seq 5 permit $ip_prefix\.0\/24
invalid command name "" ^ ^
Invalid entry % detected at ' ^' marker.
It works:
C819G - 4 G - V - K9 (tcl) #sh run | ip prefix-list section------[-^-] + seq 5 permit $ip_prefix\.0\/24
IP-list of prefixes test seq 5 permit 10.10.10.0/24
-
Confused about the output of the command show vlan id
I configured several VLANS on a switch. 3 VLANs, each assigned only one port. The output of the vlan see the brief shows me exactly what I expected:
IOU1 #show vlan bis
Ports of status for the name of VLAN
---- -------------------------------- --------- -------------------------------
1 default active Et0/0, Et0/3, and1/3
101 VLAN0101 active and 1/0
102 VLAN0102 active and 1/1
103 VLAN0103 active and 1/2
1002 fddi-default law/unsup
1003 token-ring-default law/unsup
1004 default fddinet law/unsup
1005 trnet default law/unsupBut the confusion when I do a show vlan id for one of my VLAN it lists virtual local area network interface and then two other interfaces:
IOU1 #show vlan id 102
Ports of status for the name of VLAN
---- -------------------------------- --------- -------------------------------
102 active VLAN0102 Et0/1, Et0/2, and 1/1Network type VLAN SAID MTU Parent RingNo BridgeNo Men BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
102 100102 1500 enet - 0 0Ports of secondary primary Type
------- --------- ----------------- ------------------------------------------Et0/1 and Et0/2 are trunks to two other switches. I don't understand why his list the trunk ports although I only expected to show and 1/1. Is the list these ports here because this vlan is connected via the ports of junction to the other switches? I don't know exactly what these two interfaces he said.
I think that IOU and LIO behave this way. When you say true switch, on the platforms of nexus in my experience, they are same as what you have shown above as IOU.
A switch as C3750, C3560, C3650, C3850 etc... they will out regular who you might be used to, i.e. not showing trunk interfaces in the release to id vlan.
I hope this helps.
-
the command - stored procedure support
Hi all
I'm having a lot of trouble getting my head around an update command / stored procedure, I took out all my books and has spent the last two days on Google which has aggravated my confusion. In simple terms what I try to do is to update a field in a table with the ordered there, but according to certain criteria. So my table contains the fields - following
JBAID
JBASiteID
JBADatePosted
JBAPostFor
JBANotified
What I want to do is to update the value of the JBANotified field for all records that meet the following requirements for Y
The criterion is-
WHERE the DATEADD(d,JBAPostFor,JBADatePosted) BETWEEN DATEADD (d,-7, GETDATE() AND GETDATE() AND JBANotified = ' AND JBASiteID = MMColParam n (where MMColParam is Session("SITEID")))
So I just tried to build a command procedure / stored - which reads (see attached code) (more than probably all bad)
I can't get my head around things-
First rethink code in the first place, execution of the command on the loading of the page and then when the command run the redirection to the next page.
I would really appreciate help with this-
Thank you all
Do you use the CS3 with ASP/VBScript? There is a bug in the implementation of the order which has this broken feature.
I asked about it in this forum several months ago, but now I can't find my original post, but I found another post that talks about the same thing: http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=263&threadid = 1281539 & enterthread = y
My solution is to fall back to DW8 for the edition of the command, but use CS3 for the rest. I don't know what you're supposed to do if you do not have a previous version.
It seems that your sql is correct, but the bug prevents the second block of code updated with the correct values.
I hope that a solution is coming...
-
version of the retina do not support version cs3 or cs4
I migrated just all the stuff of old iMac (early 2009, OSX AE) again (end of 2015 OSX EI retina). All the CS3 design suite software (, ps,...) seem to got license error... but shouldn't be sweating to the version of the OS, since I have the same version on my machine the two.
I do try the Adobe Creative Cloud Cleaner tool to remove and then reinstall and delete a folder as "Flnet" in the Library / preference... but it has not always worked.
IMac in version retina could take not for CS4 CS3 more?
Migration of Mac and Time Machine NOT FUNCTION correctly with the Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies
Error 150:30 fix https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html licence may operate
-
version of the agent shows unknown after Office recompose / refreshment
my view dsktops are version unknos in Manager mode after a refresh/redial
no idea why this is happening?
Maybe it took a while to initialize, but the version is returned after 10 minutes
-
I have set preferences to "show my windows and tabs from last time '. I used the button "use current Pages". I changed the used the ' | ' and I changed the ' | ' to 7% C I read in one of the bandages. If Firefox is stopped and restarted, the Mac is still in place or after I turned off the Mac and then restart it, the problem persists. I'm on Mac OS X 10.6.5 on Mac.
If you use Remove navigation, search and download history on Firefox in Firefox 3.5 and later to clear the browsing history when you close Firefox then restore the tabs from last session ("Save and exit" or "show my windows and tabs from last time ') does not work.
-
Version of the IOS taken ASA supported with WSC, 4.3
Hello world
We will deploy CSM 4.3 in our network.
Need to know if we have ASA 5505 and 5515 and 5520 which version of IOS, we should have so that it can support CSM 4.3?
Also can we get Windows server for CSM 4.3 user?
Thank you
MAhesh
IOS runs on the routers and switches. The software on an ASA is simply called Software ASA.
4.3 CSM supports ASA versions 7.0 to 8.6, although many features require ASA 8.0 or later version. Full details are listed here. If you deploy a new CSM, you should switch to the newer version of 4.4. It adds support for the ASA software up to version 9.1 (1).
As described in the deployment guide (details here), CSM 4.3 requires Windows Server 2008 or 2008 R2. These requirements are the same for the WSC 4.4
-
I need to give a recommendation on how deal with VMware 3.5 with virtual center as its production in the environment, but I need and idea to know how and where to start... Fact vmware support team, can analyze these files for me, and it is posible to open a support ticket to make this process of analysis?
I have a clariion cx3 emc2 storage
Thank you
Maynor
Hello
Thise drop what you are talking is a set of newspapers and ESXHost configuration files (e.g. unpacking, / var/log/vmkernel etc..) All files have been added to archive tgz. You can extract (sweet 7zip) Windows or Linux (gzip and tar command line tools) I have now if it a tools that will help you analyze these files.
The only way I know to start the tuning system is fist check performace statistics by each ESXHost (CPU, RAM, i/o per each LUN) for example. for the last days of servén. check when you have peaks on graphs, then go in newspapers of that period of time and start analysing what is.
BTW. You have problems with your servers?
Artur
PS, if this answer is useful for you click on some of the stars, please
-
What can I do? Thank you
Marc
Please see the links below.
- Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application
- Persistent Cloud error - error download - creative
- Download creative cloud App error
Hope this will help you.
Kind regards
Hervé Khare
-
See title
Maybe since you mention the composition of the word, they gave you a free membership creative cloud? If this is the case, you should buy only on the Adobe Web site, not in Lightroom. Then, you install the CC app and install Lightroom from here.
-
I am trying to contact a person that I paid for my subscription to the CC and it is to show that I have not bought the product. The page contact technical support is a labyrinth and continues to loop back to the same place without giving me any contact information! Help, please!
Move the debate towards Adobe Creative cloud
We have checked your account details, we see active participation of Photography Photoshop program. Please make sure that you are connected with correct Adobe Id to Adobe.com to get it. You can check:Adobe Store | Order FAQ and your online payment
To install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html, you can also Learn how to enable or disable Adobe applications from here.
Kindly let us know in case you have further questions on your membership.
I hope this helps.
Maybe you are looking for
-
Issue 115-S1100 satellite with cooling system
I had kept about 30 minutes work laptop in a bag, when I'm out there in the bag, he was doing some hot.I now have message in windows system 7: problem with cooling and then they recommend power off immediately. I bought it in the United States with w
-
HP laptop G72: G72 battery problem
OK for some time now I have been able to use my laptop while he was on the charge cable. It does not load my dough even if it says connected, 0% load... I tried to configure the stack shows how HP support program I have on my computer, but unfortunat
-
How can I access my imessages from my pc if my iphone is dead
How can I access my imessages from my pc if my iphone is dead
-
Imagine SONY would let you pass an F5 to a F55...
... which could offend anyone? Wouldn't be just an internal board/processor that makes the difference between the F5 and F55? It's a circuit sensor which gives a Global shutter us or is it processing power? 4K XAVC is pure processing power, I guess?
-
HP Pavilion 15-bc000nx: Webcam not working not
my web camra is not working I just bought this laptop it's new I've updated the operating system and updated the driver (from the internet (aut research)) HP Pavilion 15-bc000nx (ENERGY STAR) Model #: W7B64EA