3750 stand-alone switch battery change error message displays

Similar Questions

• Battery to reboot a stand-alone switch

  Hello:

  I have a Cisco WS-C2960S-48TD-L with 12.2 (55) SE2.

  It is not a standalone switch, battery and with no order it restarts automatically looking for a new election of master. Logging I have nothing, but connected with the console cable, I see after 2 minutes do not show anything what follows:

  Waiting in the elections of the Stack Master...

  ...

  The switch restarts and:

  ...

  * 00:00:12.289 Mar 1: reading env - LICENSE_BOOT_LEVEL = variable

  * 00:00:12.949 Mar 1: % IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: name of the Module = restart level according to lanbase and License = lanbase = c2960s_lanbase

  * 00:02:02.342 Mar 1: % STACKMGR-4-SWITCH_ADDED: 1 switch has been ADDED to the battery

  * 00:02:03.674 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, state change downstairs

  * 00:02:04.686 Mar 1: % SPANTREE-5-EXTENDED_SYSID: extended SysId enabled for type vlan

  I have no battery-cable connected, because it s not going to be another switch on battery. The previous state of the default configuration of the stack is:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 1 1 ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  After searching online, I have no seen anything to disable the functionality of the battery so I set the priority for the "switch 1" to 15 and set switches 2, 3 and 4, no provision, although this toggle Don t exist:

  #switch priority 1 SW_ACCESS (config) 15

  The priority of switch selector number 1 to 15

  Do you want to continue? [confirm]

  New priority has been correctly set

  SW_ACCESS (config) #no pass 2 supply

  SW_ACCESS (config) #no switch 3 available

  SW_ACCESS (config) #no switch 4 planned

  The State of the battery is the next right now:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 15 1 Ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  With this new Setup, the switch has rebooted again.

  Why on a stand-alone switch stack is restarted my system?

  Is it a function to turn off the battery?

  Thanks in advance

  SW_ACCESS uptime is 35 minutes
  System returned to ROM by power-on

  Looks like his power.

• Vista service pack 2 error code 80092004__run updated stand-alone responsible package__down ServicePack 2__run stand-alone service pack 2___ error code not found crypt_E_ (0 x 80092004) __could the log file is not open

  Service pack 2 80092004 Vista error code
  Run the stand-alone update package
  Load service pack 2
  run stand-alone service pack 2
  error code not found crypt_E_ (0 x 80092004)
  could not open log file

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer will refresh not error message displayed is "WindowsUpdate_80240016" "WindowsUpdate_dt000"

  Computer will refresh not error message displayed is "WindowsUpdate_80240016" "WindowsUpdate_dt000"

  Hi valeriecarterZA,

  ·         Updates failed to install?

  ·         You receive error messages in the history of the update to update failed?

  ·         Have you made changes on the computer before this problem?

  Search for the error message for the updates that have failed to be updated. Follow the steps:

  Click Start > all programs > windows update > view update history

  I suggest you follow the steps in the article.

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  http://support.Microsoft.com/kb/957307

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I run the stand-alone windows installer to thr and displays the error code 0 x 80240009

  When I ran the windows update stand-alone installation, it updated kb947821 hotfix, but after he would not install updates

  0 x 80240009

  WU_E_OPERATIONINPROGRESS

  Another operation in conflict was underway. Some operations such as the installation cannot be performed twice at the same time.

  Restart and try again.

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Impossible to update of the BIOS in Satellite A300-1ID (PSAGCE) 0 error message displayed

  Hello!

  Last weekend, I bought my laptop and I can't seem to do the update of the BIOS (from 1.30 to 1.40). I use Vista 32 Home Premium SP1 (which came preinstalled in the phone) and after downloading, unpacking and running the file provided by the TOSHIBA (PO10140M.exe) site, I get the following error message:

  C:\Users\Dado\AppData\Local\Temp\iscA516tmp\insyde flash.exe could not be run.

  I don't know it's the right file, because it was one mentioned, after completing all the fields in the search screen update BIOS.

  I don't understand what the problem is because the laptop is brand new.
  Any help would be greatly appreciated.

  Kind regards
  Ed.

  You are an administrator?

  Try right-clicking the BIOS file and select "Run as Administrator"

  Also to disable your antivirus, it can block the update of the BIOS.

• cartiadge error message display refer to the device documentation totrouble shoot

  HP officejet j3500 series all-in-one sir I Bay an orginel hp 702 cartriadge onl 50-60 copy cartriade error will be now display refer to the device documentation trouble shoot it please thanks replay

  Did you buy printer and then move to another country? If so, the only way to fix is to contact technical support.

  Cartridge error message.

• Error message "display driver has failed but has now recovered.

  I received a message on my PC saying "display driver has failed, but has now recovered," I got a black screen when it happened.  Does anyone know what this means?

  Jack

  It is more informative than an error message.  If she does not recover, it would be a problem.  You may be able to solve it by installing the latest video driver available.

• Error message: display driver stopped responding and has recovered

  Original title: I get an error message of...

  I get an error message... display driver stopped responding and recovered... then I get also get with her driver Intel Graphics Accelerator Driver for Window display 7 (7) is not responding and successfully recovered. also sometimes the screen just flickers...?

  Thanks for your help!

  Try to download the latest driver for your graphics card.

• "documents.library - ms" is no longer work error message displayed when you try to access files via the file browser, why?

  I bought a computer window 8 in February of this year.  I use a lot of Word and Excel documents.  I don't know how I got hurt, but now I get the above error message.  Please someone know how to fix this?

  Hello

  I understand that you are getting the error documents. Library-ms' no longer works, when you try to access the files in the file Explorer.

  You can try the following method and check if that helps resolve the issue.

  Method 1: delete the document library.

  a. press the Windows key + E from the start screen.

  b. click on document library.

  c. Select Remove.

  d. click on Yes when it asks confirmation.

  Note: deleting of a library does not delete the contents of the included folders. However, you need to add or include your folders manually, if necessary.

  Method 2: you can follow the procedure to restore libraries.

  a. press the Windows key + E.

  b. right-click on the library.

  c. click on restore default library.

  You can check the link for more information.

  Libraries: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-8/libraries-FAQ

  Libraries: How to add or delete a folder

  http://Windows.Microsoft.com/en-in/Windows-8/Add-folders-library

  If please get back to us and let us know if this helps to resolve the issue.

• Error message displayed twice

  Hello

  JDev 11.1.2.4

  I have an inputText with a custom validator

  	< af:inputText value = "#{bindings.pPassword.inputValue} 'simple required ="true"="true""
  	Columns = "#{Bindings.pPassword.hints.DisplayWidth}" maximumLength = "16" "
  	shortDesc = "#{bindings.pPassword.hints.tooltip}" id = "it1" secret = "true" = "true" autoSubmit "
  	Validator = "#{pageFlowScope.ChangePassword.validateUserPassword}" > < / af:inputText >

  The validator is called when I leave the inputText only ONCE as expected. But when it is in error, the inputText is marked, and the error message is displayed twice like this:

  Messages for this page are listed below.

  Missing a digit

  Missing a digit

  The code of the validator:

  	{public Sub validateUserPassword (facesContext, UIComponent uiComponent, FacesContext, object)}
  	System.out.println ("Validate");
  	Password String = object (String);
  	At least a check digit
  	m = regexAtLeastOneDigit.matcher (password);
  	If (! m.find ()) {}
  	System.out.println ("a figure is false");
  	FacesMessage message = new FacesMessage();
  	It's one that is displayed
  	message.setDetail (the "a missing digit");
  	message.setSeverity (FacesMessage.SEVERITY_ERROR);
  	facesContext.addMessage (uiComponent.getClientId (), message);
  	throw new ValidatorException (message);
  	}

  Why appears twice?

  Thank you

  The first is to call you

  facesContext.addMessage (uiComponent.getClientId (), message);

  and the second because you throw one

  throw new ValidatorException (message);

  with the same message that the framework adds the messages of faces again.

  Timo

• Using Custom Component error MEssage display

  Hello
  
  I built the custom component to validate the size of the file and the file Extension.
  
  That is, user should be able to check in the document if the size is less than 5 MB and the file extension is one of the "png", "tiff", "doc", "Pdf".
  
  Here, whenever validation files I'm throwing the exception "Type of file file size exceeds the limit or not valid.
  
  I am able to get the custom component of work according to the validation. And is alsi recording the error in the log file.
  
  But I need to show the error message when the click the user on the button control on the page of the Complutense University of MADRID.
  
  From now on, it shows a generic error saying "cannot perform the function validateStandard and service CHECKIN_NEW_SUB.
  The error was caused by a problem generated internally. The error was logged.
  
  Any help on this is much appreciated.
  
  Kind regards
  Helen Shetty.

  Hello

  You can throw a ServiceException in your filter with the message you want to display.

  Roman.

• How read the error message displayed in the OAF page... its urguent very please

  Hi friends,
  
  In a stnd irec registration page, if the user selects a StartDate or EndDate field as a later date like January 2, 2019, his watch a validation error database as HR_ST_DT_INVAL_PEM in the page of the OFA. So I want to replace this error with a custom message such as, "Please enter a valid start date.
  Can someone please help this.its very urguent for me...
  I analyzed according to origin of this error message, I found that the CO page called AOS, AM his call to an API that makes this error message.

  Hi GA,.

  Error message could be popping up every time you naviate to a foeld to other similar to when field Instance of new element or when file validate.

  In this case, you can take this field say that your domain is enterOrg

  if (pageContext.getParameter("enterOrg") != null && "XX_ORG".equals(pageContext.getParameter("enterOrg")) {
            try
               {
                      if ()
                         {
                                  throw new XXException("Your Check");
                         }
                   ..
                 ..
                   ..
                   ..
               }
             catch(XXException re)
                              {
                              String errMsg;
                              MessageToken tokens[] = {new MessageToken("XX_TOKEN1", token1)
                                                      ,new MessageToken("XX_TOKEN2", token2)
                                                                  };
                              OAException errorMessage = new OAException("XXPA","YOUR_MEG_IN_FND",tokens,OAException.ERROR,null);
                              pageContext.putDialogMessage(errorMessage);
                              } 
  
  }
  

  Thank you
  JIT

• Error Message displayed when executing command FNDLOAD machine in windows

  Hello
  
  I get the following error when executing the command FNDLOAD in the Windows Machine. Can someone give some details for this problem.
  
  FNDLOAD command used: *.
  
  +. / FNDLOAD apps / [email protected]:1521:OA10 0 DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME = IN.
  
  Error message is displayed for order above:_
  APP-FND-01564: Error ORACLE 6401 AFPCOA
  Cause: AFPCOA failed due to the ORA-06401: NETCMN: invalid driver indicator
  
  Let me know the solution of this problem
  
  Concerning
  Mohammed Arif

  Please try this format for the JDBC_CONNECTION and see if you get the error-' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST =)(PORT=)) (CONNECT_DATA = (SERVICE_NAME =)))'

  If you still have the same question, then please connect a SR.

  Thank you
  Hussein