3D display matrix image RGB (from MATLAB) in Labview

Similar Questions

• Data transfer from matlab to labview

  I'm having a problem importing data I save with Matlab in Labview. From the Web site of NOR, I gathered these information:

  1. To record a vector or a format ASCII of Xin matrix with delimiter to the tab, enter the following in the command window, or m-script file in the MATLAB® environment:

     >>SAVE filename X   -ascii -double -tabs
     

     This creates a file whose name is the name of the file, and it contains the X data in ASCII format with a tab delimiter.

  2. ' Import the file in LabVIEW using reading of spreadsheet files VI located on the programming "file IO palette.

  However, when I have something like an m x n matrix import in labview, I get a m × (n + 1) matrix, with the additional column is all zeros. This should be a simple answer... I know that I can remodel matrices, etc., but it seems as if it could be avoided. I can't seem to understand and am pressed for time. Any help would be appreciated.

  How big are the files? Simply remove the last colum using "remove table" is probably the simplest solution.

• Firefox does not display the Images selected from the Google search results!

  I'm a recent new user of Firefox, since my IE8 on XP does not work with certain sites.
  I am now on Firefox 25.
  Firefox has a couple of mixed content settings, and in fact, some changes have gone with 25 who has been registered to be in 24, but was not (I read).

  Anyway, my IE8 and IE9 on Windows 8, I believe, have a warning that appears in a box when I go to a web page with mixed content, so I can decide whether to allow the display of mixed content, and I make the judgment, if I'm on a bank or other secure site, etc.

  This mixed content WARNING CHOICE seems to be missing in Firefox, and I'm surprised!

  In any case, in Firefox 25, mixed the active content is blocked, and when I do a google search on '2014 Nissan Rogue', successes were few images called images.
  When I click on any of these images, a blank page appears, with no way to allow the image to display. Help!

  Looks like 25.0.01 that came out a few days ago has fixed the problem that existed in 25 delivered a few weeks before. Thank you!

• I can not display all images downloaded from the internet on Windows 7

  OK, so I just Windows 7.  I am trying to save documents that my teachers put up online in the form of a pdf file.  However when I try to open them I recorded them in Picasa it appears as a black box, saying "invalid Image".  In the Photo Viewer Windows it says "Could not be opened because the file format is not supported or you do not have the latest updates for the Windows Photo Viewer."  But I installed the latest version, as well as the latest Picasa.

  Also, I'm fully able to open other images (the ones I imported out of my phone etc.)

  What is the problem?

  Thanks in advance!

  PDF is not a picture itself, but you need a PDF reader to open them. Either try
  www.Adobe.com (Adobe Reader - do not add extra) or try
  Good alternative to Adobe Reader is Foxit

  http://www.foxitsoftware.com/PDF/reader/Reader3.php

  I hope this helps.

• Message text to display in the carousel when no image extracted from the database

  I'm creating a carousel using pictures from a database table. All the fields in the table contains no images. Currently, it displays a cross mark on the image.

  For areas that I want to display text can be 'No Image'. To do this, I put the property 'EmptyText' of the Carousel component. But the text does not appear. Also, I do not wish the crossroads brand to display instead, I want only the text "No Image" look upwards.

  JDeveloper version - 11.1.1.7.0

  Fig-cross brand displayed for image empty

  

  Fig-EmptyText property set for the carousel component

  

  

  If I understand correctly, emptyText shows as if the entire dataset is empty, not a picture (if any rows in the resultset). It's same with af:table. Maybe I'm wrong, however.

  You can use an 'empty' image: for example to put an image of 'empty' (tailored to your needs, is perhaps 'no image' text or an icon etc.) in your project resources folder. Then, in your application, replace "null" for path to this image and it will be dispalyed instead of the generic "missing image" icon in the browser (Yes the red X is icon generic browser for missing images).

• Lightroom displays all images from a folder - it displays the message '45 65 images, selected 45' and 45 messages do not appear in the grid of the library, but I can't see the remaining images of 20. All filters are disabled...

  Lightroom displays all images from a folder - it displays the message '45 65 images, selected 45' and 45 messages do not appear in the grid of the library, but I can't see the remaining images of 20. All filters are disabled...

  Hello

  Please go to the library Module, then click on the picture in the Menu bar and then click the stacking.

  From there please select expand all stack them.

  It should show all the images if they are virtual copies.

  Kind regards

  Tanuj

• How to display an image from the file in the database

  I want to be able to display an image from the file that I have stored in a database. In the database, the image is store as a file with numbers. When I go to display only the sign of an image appears. I want to be able to display the image not the symbol for numbers of the image or file. I know I'm close I just can't understand what I'm messing, to get the image to display.

  Here is the code:

  <? PHP require Connections/Connections.php"?" >

  <? PHP

  session_start();

  {if (isset($_SESSION["fname"]))}

  }

  else {}

  Header('Location:NewRequest.php');

  }

  ? >

  <? PHP

  $User = $_SESSION ['Pnom"];

  $result = $con-> query ("SELECT ALL * from newrequest where Fname ="$User"" ");

  ? >

  <! doctype html >

  < html >

  < head >

  < link href = "CSS/Master.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "CSS/Menu.css" rel = "stylesheet" type = "text/css" / > "

  < meta charset = 'utf-8 '.

  ReviewRequest < title > < / title >

  < / head >

  < body >

  < div class = "Container" >

  < div class = "Header" > < / div >

  < div class = "Menu" >

  < div id = 'Menu' >

  < nav >

  < ul class = "cssmenu" >

  < li > < a href = "Account.php" > account < /a > < /li > ""

  < li > < a href = "UpdateAccount.php" > update account < /a > < /li > ""

  < li > < a href = "NewRequest.php" > new request < /a > < /li > ""

  < li > < a href = "ReviewRequest.php" > Review Request < /a > < /li > ""

  < li > < a href = "LogOut.php" > sign out < /a > < /li > ""

  < /ul >

  < / nav >

  < / div >

  < / div >

  < div class = "LeftBody" > < / div >

  < div class = "RightBody" >

  < name of the form = "form1" method = "post" action = "" >

  < table border = "1" >

  < b >

  < td = '26' height > name < table >

  Location < td > < table >

  Description < td > < table >

  Image of < td > < table >

  < Td > status < table >

  < /tr >

  <? PHP while ($row = $result-> fetch_assoc()) {? >}

  < b >

  < class td = "GFied" > <? PHP echo $row ["Fname"];? > < table >

  < class td = "GFied" > <? PHP echo $row ['Location'];? > < table >

  < class td = "GFied" > <? PHP echo $row ['Description'];? > < table >

  < class td = "GFied" > < img src = "<?" PHP echo $row ["numero_imagenom_image"];? > "alt =" "> < table >"

  < class td = "GFied" > <? PHP echo $row ['Status'];? > < table >

  <? PHP}? >

  < /tr >

  < /table >

  < / make >

  < / div >

  < div class = "Footer" > < / div >

  < / div >

  < / body >

  < / html >

  This is what it looks like when it displays:

  

  How can I actually picture to display?

  emrenilo32520834 wrote:

  I added the .jpg but the image still does not display, the images are saved in a jpg file.

  If the images in the database to follow this format - 1234567.jpg, 9897654.jpg

  Then your original code must have worked:

  

  Are the images in their own folder, if so you need to add this folder for code name:

  

• Cannot display the image from Internet on BlackBerry

  I developed a simple code to display an image and a title on the screen of a blackberry, but I am not able to display anything (but if I tested for the title just does not) my requirement is to display the image with title in a list? I followed

  This link to get an image of the url of the image

  and here is my code in the drawlistrow method:

  ' public void drawListRow (list ListField, Graphics g, int index, int y, int w)
  {
  String text = (String) listElements.elementAt (index);
  Bitmap image = GetImage.connectServerForImage ("http://toucheradio.com/toneradio/iphone/toriLite/toriLive.png");
  g.drawLine (0, y, w, y);

  g.drawText (text, 150, y, 60, w);
  g.drawBitmap (0, image.getWidth (), image.getHeight (), image, 0, 0);
  }

  can we know what is the problem?

  HII,

  "I had my requirement, if add this ("; deviceside = true") at the end of my image for web url like this imageweburl +"; deviceside = true', while working

• Statistics of the 32-bit image RGB

  Hi friends, I am trying to get an image RGB information. I created a VI in labview to aid vision for this wizard.

  But the problem is that, although it attracts the histogram for all three colors, it displays 'statistics '.

  (i.e. max min value, standard deviation etc.) for the color red and blue, and green also.

  What should I do in order to get statistics for all three colors.

  Best wishes

  Automator

  Hello

  You just drag an express VI, created from Wizard of vision or have you created the VI yourself in the range of vision?

  I suggest to do the latter and use this function:

  

  If you have problems, doing so after the VI is came with, it will be easier for people to help you

  Hope this helps

• Windows in the Finder display broken images but not files

  MacBook Pro 5,3; 1 TB HD, 8 GB of RAM, 250 GB aftermarket SSD drive replace optical drive. 10.9.5 running on the SSD drive.

  It is a weird problem. Finder windows do not display content, rather display an image initially as a screenshot of the file includes. It's confusing, but say you have the < username > folder open. It appears to display all the right folders. Then you click on one of these files, such as Documents, to open it. Instead of display what is in the Documents folder, it displays a "screenshot" of the < username > folder. Now, if you drag this folder around the screen, when it passes the edges of the screen, the fragments of the image borders. The picture below shows.

  Opening a file or a folder on it will leave an image that above this mess. Screenshots do not work. A double click on the files on the office sometimes opens the file opens sometimes nothing, sometimes opens another file on the desktop and sometimes opens something that I don't know where it comes from. But otherwise, the functions of the computer normally - applications work and the sidebar of finder windows works properly as you can tell from the path below bar.

  And it seems to be limited (at least right now) to my user. I tried an account that I keep around for troubleshooting, and it seems to be affected.

  I threw the finder preferences (it's good that I know how to get to preferences with no visual cues) and restarted the finder and restarted the computer. I used TechTool Pro to check the RAM (not a very complete test, but I would think if it's RAM more than touch the Finder) and video.

  I have a good backup and am ready to reload the OS, but because it affects only the finder and in my account, I don't know I'm not just to restore the problem. I am running a scan with Sophos antivirus right now, but I ran a few weeks ago and saw nothing (as expected).

  I just uninstall TotalFinder, but he was on the computer for years, but turned off during the last months. It JUST started tonight. I haven't used the computer since probably yesterday and I haven't seen ANY sign of it then.

  I don't know where else to look at.

  Sophos can cause computer problems. Try to uninstall.

  Uninstalling Sophos

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Why my "display windows and tabs from last time ' does not work?

  Hi all

  I used to have my settings set to "display windows and tabs from last time." For some reason, it does not. Whenever I close my tabs, Firefox warns you me I close many tabs, and when I reopen it Firefox, I only get my home page.

  In the menu options, I put 'windows and tabs from last time' options, and in private life, I have "Firefox will remember history", so I do not think it is related to my settings.

  I saw a thread on 'browser.sessionstore.enabled' must be true about: config, but I don't have even a name preference that says "browser.sessionstore.enabled. Maybe that's the problem? If so, I have NO IDEA how to fix this. I only am not at all computer savvy.

  If someone could find a solution to this very annoying problem, I would be very grateful. If it takes a lot of work of programming/techno, please be VERY descriptive (pretend I'm a 5 year old child in giving directions).

  Thank you!

  Browser.sessionstore.Enabled is no longer used, worry not if you can't find it.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history – which will prevent the restoration of the work session.
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  You can check the prefs of . browser.sessionstore * including browser.sessionstore.resume_from_crash on the topic: config page and reset the browser.sessionstore prefs that are correct (in bold) user via the context menu in the default value to make sure that the Session Restore is enabled and functional.

  • http://KB.mozillazine.org/Session_Restore

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Satellite A100 does not display an image at boot

  Hey all.

  I'm having a problem with my laptop (A100), which is a little perculiar. I keep my PC the other day to restart. But when it restarts, it does not display an image. I saw any activity usual boot sequence, as HD-activity and other. But no picture.

  I tried to remove the believer battery which would solve the problem... but it didn't, and I simply dropped.

  The next day I started the machine, and it returned to the top and ran exactly as usual. So today I rebooted the machine, and he did the same thing. No image... but the normal boot sequence. I noticed that the battery - led is lit constantly, which is NOT normal. And when I remove the AC power the machine dies simply indicating that the battery is completely dead. But what is odd, behold, the machine will actually start (although without a picture) when I remove the battery and just plug in the AC power.

  Of course, I tried the usual things, want to do a test of the fool to make sure that the power is really and I've been busy pressing FN + screen-switch-button, but nothing seems to help.

  Now my question really comes in two parts:

  1. what may be the cause of this problem? I guess the battery is dead - and past 1.5 years is probably what I read. But why it works when I remove the battery and just use the normal power cable? Clues as to what I can do here?

  2. How can I retrieve my data from my hard drive? The data are quite valuable, and even though I have backups of it, I always lose hourse valuable work if I'm not activate somehow of the transfer to another machine. I have a Dell laptop, but I don't know there that a hard drive from a Toshiba will go in a Dell. Maybe you can me if they work together?

  Look forward to hearing from you and thanks in advance for your help!

  Looks like there is a bad connection between the video card and display, or the VGA or LCD card have an intermittent fault.

  To back up your data, you can attach the HARD drive to another PC using a USB SATA 2.5 "HDD adapter.

• Cannot display synchronous image

  Hi people

  Here's a question about the image obtained from the camera picture cannot be displayed synchronously in the indicator. What I want to do is to display the raw image in the indicator (called 'Image'). I already have the flag as the synchronous display, but when I ran it, image could not be displayed at all times, always flashed. I probed the wire that connects to the indicator, but gave the image on an accumulated constantly, image. It's so weird that the indicator on the front panel could not show the image constantly.

  I have attached a photo of the front panel and block diagram.

  Thanks for your help.

  Hello

  If you right click on the image display and Snapshot mode, does make a difference?

  -Zach

• Display/save image in 8-bit grayscale

  I have a VI that captures an image in grayscale 8 bits (table 1 d of 1500 pixels). It has a 10-byte header that I remove and try to view it.  The problem is that the image is considered to be a RGB.  In addition, the saved image can be opened with an image viewer but is not correct.  The pixel data is missing. How do I get this to display an image in 8-bit grayscale.  I would also like to duplicate the 1 line of the image to about 50 lines data to make it easier to observe.  using a loop and indexing the line only leaves the empty pxmao.

  

  Bjoles,

  You are missing a color table entry to your flatten pixmap block. See extract vi I have attached. Also, I found that building the tables of a loop is a quick way to do it, Labview seems to pre-allocate memory correctly.