3D extrusion error [CANT]

Similar Questions

• RUNDLL error: Cant' find abozujecazuwipiq.dll___Build 2600.xpsp_sp3_gdr_.100216 - 1514 Service Pack 3

  Opening Windows screen, I get

  RUNDLL error: Cant' find abozujecazuwipiq.dll

  I am running Windows XP, Version 5.1

  Build 2600.xpsp_sp3_gdr_.100216 - 1514 Service Pack 3

  I click OK and the computer works fine so far.

  Thanks in advance for any help

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind a registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during a scan for malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to run the file. It may or may not be included in the registry.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   Disabling in msconfig it is the old mans solution (or the profane mans solution) and leave you with a sloppy XP configuration.
  If you are comfortable editing the registry, you can search and remove the reference from where remove it using a popular third-party tool called Autoruns.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. Here is a link to a popular registry backup tool:
  http://www.larshederer.homepage.t-online.de/ERUNT/
  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually in the usually start startup entries or the system user then click on the connection tab.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find there, look in any tab.
  Right-click on the offending entry and choose Remove.  If you don't see it in Autoruns, you must edit the registry and remove the item from your startup folder it.  Autoruns displays the same information, however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware first, then correct any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• V.18 Illustrator CC (unknown error CANT / Unknown error MIT) drives me crazy!

  Hello

  I installed Illustrator CC v18 a few months ago and I was using it normally.

  I use Windows 8.1

  My operating system language is Spanish (I'm in Spain)

  The language of my Illustrator is also Spanish

  So today I wanted to install a graphic style, which I downloaded from a Web site, and I installed it. Just use the menu of libraries to find the .ai file in which are contained the styles... and then found the .ai file and selected to open it, so I loaded styles, as always. What's happened is this .ai file destroyed my Illustrator. Exactly what happened is this:

  When I searched for the file .ai with styles... and loaded it... in the menu of libraries...

  1 illustrator did not open any library of styles... nothing happened...

  2. then libraries button has been disabled, even if you pressed on top, was completely impossible to make it work...

  So I decided to close illustrator and restart my PC

  After my PC restarted... I tried to launch Adobe Illustrator and what has happened is that illustrator doesn't work well anymore.

  It is as if this style "screwed up everything" inside the Illustrator, and now it gives me many mistakes CANT and MIT!

  Sorry, but hell ARE these errors and CANT... Unknown error...

  3. so I create a new document, I get a CANT and a mistake MIT...

  4. the default styles are not displayed correctly after these errors...

  5. Finally if I create a blank document, and then, when I am drawing something I get screens increasingly bothering me with error CANT... Error CANT...

  ????

  I'm really confused and do not know what to do.

  I have panic to illustrator to uninstall and reinstall again.

  If someone could help me please to solve this problem, I would really be greateful.

  See you soon

  Jacob, you provided a solution to this problem in the past, without having to reinstall the software. I applied your solution... and I think I solved the problem.

  Don't remember you said that some users move Illustrator preference settings?

  I searched the forum and found a job in which you suggested that.

  Anyway... to make easier how solve the problem here is the solution.

  WELL, I THINK I FINALLY FOUND A SOLUTION FOR THE CANT OF UKNOWN ERROR / MIT ERROR UNKNOWN

  * SOLUTION POSSIBLE FOR THE ERROR UNKNOWN CANT / MIT UNKNOWN ERROR IN ADOBE ILLUSTRATOR CC * NO NEED TO UNINSTALL OR REINSTALL anything. ONLY 2-5 MINUTES TO SOLVE IT.
  

  • With this solution you will not have to uninstall and reinstall anything.
  • It takes just a few minutes.
  • This solution has been possible thanks to this site:

  Illustrator tips

  Move the folder: When things get strange.

  
  

  For Illustrator CC *.
  

  
  

  ERROR:

  
  

  • ERROR UNKNOWN CANT
  • UNKNOWN ERROR MIT

  SYMPTOMS: After some time of use, Adobe Illustrator CC does much more and display an ERROR UNKNOWN CANT... or UNKNOWN MIT ERROR... or both... This could happen unexpectedly, or simply by loading the graphic styles developed by a third party.
  

  POSSIBLE CAUSE: The corruption of the preference of the files inside the folder settings Adobe Illustrator CC.

  TIME TO FIX IT: 2 to 5 minutes. NO NEED TO UNINSTALL OR REINSTALL ANYTHING *.

  DIFFICULTY: Easy

  SOLUTION:

  1. Close Adobe Illustrator CC if it is already open
  2. Go to \AppData\Roaming\Adobe C:\Users\
  3. Please note the Windows to create folder with the identifier that you use in Windows
  4. In the \Adobe folder, navigate to the folder... Adobe Illustrator XX Settings, where XX represents the version of Adobe Illustrator, for example Adobe Illustrator 18 settings or Adobe Illustrator 19
  5. Then, move this folder on your desktop
  6. Preserve this folder moved in your office, so on later, you can browse it and recover workspaces already saved (optional)
  7. Now open Adobe Illustrator CC, it will automatically create a new settings file, reset all factory values, without the need to reinstall.
  8. Unknown error CANT or MIT now does not appear anymore.

  WORKSPACES (OPTIONAL) TRANSFER:

  • If you have multiple workspaces, due, we reset Illustrator to the factory default values, you will find more of your workspaces. HOWEVER, WE CAN RECOVER'EM.
  • Workspaces are stored in the folder \Adobe Illustrator XX Settings\en_US\x64\workspaces (for users in the United States) where XX stand for the version of Illustrator... 17... 18... 19... etc.
  • For Spanish users of Spain, 'trabajo espacios' workspaces are stored in the folder Adobe Illustrator XX Settings\es_ES\x64\Espacios of trabajo where XX stand for the version of Illustrator... 17... 18... 19... etc.
  • To recover your work spaces just go to the folder of Illustrator, that we have already placed in your office... and navigate to the workspace folder
  • For users in the United States... \Adobe Illustrator XX Settings\en_US\x64\workspaces
  • For Spanish users of Spain... Adobe Illustrator 18 Settings\es_ES\x64\Espacios of work
  • It copy all the files of your workspaces created earlier...
  • Now go to the folder on the nine parameters for Illustrator, Illustrator CC created on your hard drive...
  • It should be placed in (the United States users)\AppData\Roaming\Adobe\Adobe Illustrator XX Settings\en_US\x64\workspaces C:\Users\
  • For Spanish users of C:\Users\ Spaintrabajo \AppData\Roaming\Adobe\Adobe Illustrator XX Settings\es_ES\x64\Espacios
  • Now, in the Workspaces folder, paste all files Word spaces that you copied into your folder of Office workspaces
  • Fact

  
  

• ERROR: CANT FIND SHORTCUT for hp aSSISTANT

  After re installation wizard HP click HP Advisor succesfully scrolls tp Assistant and received the error message "shortcut cannot be found ' how can I create a shortcut under HP assistant control panel attended but could not be shortened

  Thank you!

• Error CANT DOWNLOAD PDF FILES/module

  When I download a file to microsoft office I get a window with options of download, IE: the West, Japanese etc. & I get an error message from module vz. I can't download files I tried everything! Can simeone if you PLEASE HELP me!

  Green blessings to you & yours,

  Ellen

  Hi Ellen,.

  What program exactly do you use to do the download (name and version) - I'm not familiar with any Office program that performs downloads - although you can get attachments via Outlook (Internet Explorer and if so which version)?  In the place where (what exact path name) do you download (desktop, downloads,...)?  This ONLY happens on the PDFs - I mean can you download other types of files such as .doc or .xml or other (or if you have not tried)?  What is the EXACT message text receive you (especially the vz module error message but all other messages as well) and when to do each process occur?  What version of Vista are you using (for example, 32-bit Vista Business SP2) and you have installed language packs?  When exactly the problem started?  What version of Microsoft office are you using?  Do you have Adobe Reader installed (or some other ptrogram which can open and read PDF files (if so, what name and version)?)

  Let's start with a fairly simple option that can solve the problem.  Do you know when this problem started?  Try a system restore to a point in time before the problem started (give him room to manoeuvre a little if you can).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  For additional help (if the system restore does not resolve the problem), I need answers to the questions in paragraph 1.  Sorry, but we need your help with this information to help you.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Several questions, the system crashes, corrupted notepad.exe.mui, SFC scan errors, cant play Battlefield 4 game

  Original title: I need help - corrupt notepad.exe.mui

  Hi all! This is my first time around these parts, so forgive me if I make a mistake and prepare for a long story.

  Quick information on my computer:

  Windows 7 64 bit

  AMD Radeon HD 7950

  8 GB RAM

  Intel i5 4670 k 3.40 GHz Quad Core

  Recently I bought Battlefield 4 for PC. I have loaded on my computer with ease but quickly came across a problem when I tried to play the game. My GPU drivers were apparently outdated and he gave me the choice of either a. cancellation of the launch, or (B) try to play anyway. Looking forward, I tried to launch anyway. No dice, the game freezes immediately and I can not play. At a time of the option.

  After traveling around for a bit, I discovered that my drivers were, in fact, to date and should update. So I downloaded the latest drivers, "AMD Catalyst Omega", and you click install (note that I have not manually uninstall previous drivers, so I don't know if it has really done anything). After that, he went through the whole process, do things (I suppose) as uninstall the old drivers and install the new. After it was over, I was able to boot successfully in the field of battle 4 and was able to play both the campaign and multiplayer without fault at 60 fps oh high heat. (Great game BTW, recommend to all who love FPS).

  Well, after a few hours, I decided to call it a night. After closing, I noticed that the bar at the bottom of my screen flickered from top down in very quickly. Naturally, I found it quite strange and decided to shut down my computer (thinking at the time, that I should probably do that as soon as the new drivers were installed - it was the result of not doing).

  The next day, I woke up wanting to start playing Battlefield 4. But, much to my dismay, my computer froze as he was loading the desktop. Now, it was nothing new for me, I had a lot of computer problems in the past, I can fix it this one as well. My first thought was just reboot and see if that will change anything. Unfortunately, he did nothing. He froze in the exact same task as he had before. It started to scare me a little. Previously, during an automatic update of windows, is the same thing. He has downloaded everything installed fine, very good, but when my computer restarted and tried to load to the top of my desk, my computer would freeze. Finally, I had to use system restore and restored my computer to a point before Windows automatically updated. After that, I disabled the automatic updates and him haven't touched since (Yes, my computer is has not been updated for months and months. I think that I stopped the download of updates at the time an update of Windows technically dirtied by malicious software that would crash the computers).

  I noticed the problem how similar I saw now was the question I had before with the updates of Windows. So I took to the system restore and wala, my computer was still running reliable update of the driver pre - GPUS. Now, I was still burning for some 4 battlefield. Whether I went through the same process as before, it would result in the same outcome, I did a little research. It turns out that someone had a similar problem for me. Their solution was to ensure that information on previous drivers had gone to 100%, and it said to use two programs called DriverFusion and CCleaner, well, I followed the instructions of the solution: uninstall the drivers - with DriverFusion - restart good computer - installation of new drivers - to go, but once again, no dice. A frozen at the exact same task as it did before.

  Now completely annoyed at all this, I'll be back and system restore to the point that I just had previously. Except that this time it did not work. Were no longer my system restore bringing back me to the settings of the computer that worked, it would freeze (and sometimes a blue screen), every time I tried from the desktop. Sometimes, I could get a few minutes before it would freeze, other times that I do not see my office. And it doesn't matter what time I have to put in place. Sometimes, the system restore would work, sometimes it wouldn't, but in two results, it would freeze at the office.

  Panic is now being that my computer does not seem to work at all. I can still run without danger made (thank God for that), but normal Windows is just the gel. As my panic slowly transforms into a will, I turn to google to see if someone is having my exact problem (Note: everything I do on my computer is in safe mode, and any internet research I do is on my smart phone). Finally, I came across a page saying: I need to use the command "sfc/scannow" and this should solve my problems. If I use the command, and he said that he detected problems, but has been unable to fix. He also said that he saved the information on the analysis in a journal, a journal that I could access. So I do! The entrance to the EXACT newspaper that speakes of the error is.

  2014 12-26 11:46:03, info CSI 00000321 [SR] verification complete
  2014-12-26 11:46:03, info CSI 00000322 [SR] repair of components 1
  2014-12-26 11:46:03, Info CSI 00000323 [SR] beginning verify and repair
  2014-12-26 11:46:03, info CSI 00000324 Member \SystemRoot\WinSxS\x86_microsoft-windows-notepad.resources_31bf3856ad364e35_6.1.7600.16385_en-us_1dbc2e35304db501\notepad.exe.mui file hashes are not actual file [l:30 {15}] "notepad.exe.mui": "
  Found: {l:32 b:tfmxBgEeHYSqU0nOhrdrRtqL98a1xYC32if7l90WiOg =} expected: {l:32 b:o2tSWlTNsLpfCP + I3R4E0Dz7Z4HwNtMMweSbWEZCHTw =}
  "2014 12-26 11:46:03, info CSI 00000325 [SR] cannot repair the military record [l:30 {15}]"notepad.exe.mui"Microsoft-Windows - notepad.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch"
  2014-12-26 11:46:03, info CSI 00000326 Member \SystemRoot\WinSxS\x86_microsoft-windows-notepad.resources_31bf3856ad364e35_6.1.7600.16385_en-us_1dbc2e35304db501\notepad.exe.mui file hashes are not actual file [l:30 {15}] "notepad.exe.mui": "
  Found: {l:32 b:tfmxBgEeHYSqU0nOhrdrRtqL98a1xYC32if7l90WiOg =} expected: {l:32 b:o2tSWlTNsLpfCP + I3R4E0Dz7Z4HwNtMMweSbWEZCHTw =}
  "2014 12-26 11:46:03, info CSI 00000327 [SR] cannot repair the military record [l:30 {15}]"notepad.exe.mui"Microsoft-Windows - notepad.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch"
  "2014-12-26 11:46:03, info CSI 00000328 [SR] this component was referenced by [l:266{133}]"Microsoft-Windows-WindowsFoundation-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.Windows Foundation Language Pack.
  2014-12-26 11:46:03, Info CSI 00000329 repair results created:

  "(Note that I stressed and bolded what I assumed important information, and it's the only mistake he came with).

  The only thing that I have noticed time and time again is the reference to a file called "notepad.exe.mui". Curious, I investigated more research and found that the file may be damaged and even deleted without knowing you, even by simple virus. Now, I know that I had a virus on my computer when the update of the driver. Try to add the pieces together, I thought that maybe this virus was the reason that this file has been going crazy and maybe even corrupt the file itself. Later in the article to tell me about the "sfc/scannow" command, he said that if it is available, I can get the file from another computer that is the same as mine. So, I borrowed laptop from my brother, running Windows 7 64-bit, publish the file on his computer, put it on a flash drive, plug it into my computer, move my old notepad.exe.mui on the desktop (Yes, I still have the original) and replace it with my brothers.

  Now for the part I did not yet understand. Replacing the file met with some success. After the first restart, my computer blue armored, but after the second reboot, it was in normal operation once again! Pre - GPUS normal update driver, that is. But nevertheless reliable running. Careful, I decided to run my anti-virus, Avast! and see if something happens. Of course, on a quick scan, he found a "malicious" file and I "moved it to the chest. To be doubly sure that all is well, I decide to run a scan at startup and have it automatically move all the malicious files, he finds 'trunk' or whatever he calls. I allow this to run at night and wake up to find that my computer still works reliably.

  Well, not wanting to take another chance, I run "sfc/scannow" once, just to see the error is still there. Nothing has changed. Sad it's not yet over, I again to replace the "notepad.exe.mui" in my computer this time that I deleted it, with one always on the flash drive. No blue screen on reboot, but I decide to again run the command "sfc/scannow". Once again, same error.

  At this point, I have no freaking idea what to do. My last two options are to use my disc and 'repair installation' and see if it makes something or just completely re - install Windows, which without a doubt, I don't want to do. Now, I can still play my old games very well. It's just I can't update Windows or drivers, fear, it may have a very dangerous effect.

  Anyone with any information which could be of use, please do not be afraid to say something. I come to this community as my last resort. Any information will be helpful, and I will watch this post like a bird of prey. Thank you for reading all of this. I'm sure it was quite the trip.

  Hello Logan,.

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  To proceed with method 2 and then Fixit and manual steps to reset the Windows Update components in method 3 and check running SFC analyzing once more.

  If the problem persists even after trying the method 2 and 3 the method successfully, you can try to repair (MBR Master Boot record), boot sector and Boot Configuration data via Bootrec tool in the article below.

  Use Bootrec.exe in the WINRE to troubleshoot startup problems.

  http://support.Microsoft.com/kb/927392

  Just reply with the results. We will be happy to help you.

• Trace function not working, has a message "unknown error [CANT]" of the image. How can I fix?

  I'm new to using Illustrator, but the trace function worked fine yesterday. Today, however, I keep getting this error message no matter what setting track I'm trying to use. Any help would be appreciated, thanks.

  It seems to work again, and the computer was off for awhile. Maybe it was something to do with it? Anyway thanks for the help, if it starts to happen I'll ask.

• just downloaded trial first pro no error cant open cannot uninstall

  just loaded Prem pro trial, no error can not open.

  I want to move to my work computer and don't know how

  No responsible onl icomns; is the cloud of adobe app thing

  The trial can be installed only once with the same Adobe ID.

  Concerning

  Stéphane

• App Manager (Windows) installed Illustrator CS6 16.0.3, now I get the error "the operation cannot complete because of an unknown error [CANT] now what?

  Any suggestions? This error alternates with an error message saying that "some plug-ins have been updated." You will need to re-launch Illustrator so that the changes are taken into account. »

  Photoshop CS6 boots fine after the update.

  I knew I shouldn't have installed this update. Everything worked well.

  Thank you!

  Dean

  FIXED IT, happy happy, joy joy.

  I've changed preferences for D:\ disks and no Scratch, and error messages are all gone.

  Back to your regular programming.

  Dean

  PS-Trivia, I have used to be a support technician from phone to PC Freehand working at Aldus, in 1990. I learned a lot during this hell.

• keyboard no longer works, I get an instance previous code 38 device error cant load of the device still in memory__ driver

  OK ive uninstalled the drvers and restrted some times nothing can not even turn off caps lock I tried using appwiz.cpl I didn't know keyboard driver lissted.

  also this isn't a wird or wireless keyboard just a logitech usb keyboard

  all I want is the issue don't get resolved I tried the solution of the same problem under my problem still presist

  Hi killsavenge,

  ·        What is the model number of the keyboard?

  ·        You have uninstalled previous USB software installed?

  Run the fix it from the link below and check if this can help: Tips for solving problems of USB devices:http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices

  You can also check out the link below: Tips for solving common problems of driver:http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During installation, download "error!" Cannot initialize the plug-ins directory.

  Has started having problems when opening Firefox and trying to make Firefox the default browser. Windows 7 update and update AVG virus scan clean, updated MalwareBytes and scan clean. Troubleshooting finally brought me to uninstall and try for a clean install... normal Windows 7 uninstall process successful. Is that Firefox folder in "Program Files" has been deleted. Download "DownloadApp_1_7_5_198_Setup" (29 442 KB) of the Mozilla Web site and run... "error!" Cannot initialize the plug-ins directory. Please try again later. »

  http://www.bleepingcomputer.com/forum.../error-cant-initialize-plug-ins-directory-please-try-again-later/
  What are the permissions on your Temp folder?

  Look to see if there are a few cases on this point, brb.

• Error message "can't find script engine"VBScript"script"C:\Program Files\Verizon\IHA_MessageCenter\CmdVBS.vbs"appears randomly

  Original title:

  "Impossible to find"VBScript"script"C:\Program Files\Verizon\IHA_MessageCenter\CmdVBS.vbs"script engine

  This host Script Windows message pop up on my desk every 30 min or so, how resolve this specific problem with VBScript?

  http://www.SevenForums.com/Windows-updates-activation/196011-cscript-error-cant-find-script-engine-VBScript-alternate-solution.html

  should help

• Webcam driver problems error "can't" find engine "VBScript" script

  Webcam on my laptop of toshiba satellite l850, windows7 64 bit stopped working, downloaded drivers, but when installing them I get the error message, windows script host can "t find script engine"VBScript".anyone have any suggestions?

  error message, windows script host can "t find script engine"VBScript".anyone have any suggestions?

  Try to fix it using these
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/cant-find-script-engine-VBScript-for-script/960f24d1-BF92-4CEC-b73e-520a04891073

  http://www.SevenForums.com/Windows-updates-activation/196011-cscript-error-cant-find-script-engine-VBScript-alternate-solution.html

• OS El Capitan 10.11.5 update fail

  Hello

  When I try to update my MacBook Air to OS El Capitan 10.11.5, a message indicates that the software cannot be verified.

  I don't understand what the problem...

  I have download the update from the App Store, but the problem appears when you restart the machine in order to install it.

  Can you help me solve this problem?

  Thank you

  Here's a possible solution: http://osxdaily.com/2015/01/19/fix-os-x-install-errors-cant-be-verified-error-oc curred-preparation-mac /

• How can I get a valid ip address on my router

  my computer does not connect to my xbox wireless because it cannot find a valid ip address

  Hi Austin1234,

  ·         What operating system is installed on your computer?

  ·         Since when are you facing this problem?

  ·         What the exact error message you get when you try to connect the Xbox Wireless?

  I suggest you check out the links for more information below.

  http://support.Xbox.com/en-us/pages/Xbox-360/troubleshoot/KB/error-cant-connect-wireless-network.aspx?kbid=978945

  http://support.Xbox.com/en-us/pages/Xbox-360/how-to/Xbox-360-as-Media-Player/media.aspx

  http://www.Microsoft.com/windowsxp/mediacenter/Extender/Setup/ssviewer.mspx