4 k images display problems

Similar Questions

• background image display problem when using Theme1

  Hi all
  I encountered a strange problem.
  I am trying to use a picture as a background for my login page.
  I uploaded the image to the application, and I added this line to the part of HTML header to page 101:
  < body background = "#WORKSPACE_IMAGES #eagle.jpg" >
  
  the problem is that if I use Theme1 as the theme of the application - the image does not appear.
  When I spent the 13 theme - the image is displayed.
  of course - I want to use theme1 as the theme of the application
  
  can anyone help?
  
  Thank you

  First of all, always include the following information when you post a question:

  -APEX version
  -Edition and version DB
  -Web server architecture (EPG, SST or APEX listener)
  -The browsers used
  -Theme
  -Models
  -Type of zone

  Some of them may not apply to every issue or the possible solution, but it saves time in detection for more information.

  The issue in hand, I start from the principle of the described behavior that this is Apex 4.0...
  >
  the problem is that if I use Theme1 as the theme of the application - the image does not appear.
  When I spent the 13 theme - the image is displayed.
  >

  It is either:

  An illustration of the difference between Quirks mode and standards mode rendering. The former -triggered by the absence of a declaration DOCTYPE in 13 theme page templates- allows the browser to attempt to make some soup tag is launched on it. In this case, it would be the presence of 2 pieces of bodywork on the page, which is caused by the addition of

  via the HTML header to a page that already has a body of the template of the page element.

  OR

  It is caused by the theme 1 style sheet by specifying a rule of background rather than a rule of the background color as the theme 13.

  In any case, the background attribute attribute has been deprecated for 11 years + and should not be used at all, and as I have already said, all the pages already include a body element in their model, so the addition of another - for some reason-via the header HTML is also completely the wrong approach.

  (X) HTML is used to provide the structure of a page; CSS to control the presentation. The backgrounds are presentationnelle, so are implemented using CSS. Add the following style sheet in the header HTML page will provide the equivalent of the background HTML attribute in theme 1:

  See w3schools for a few tutorials providing some basic information about (X) HTML and CSS.

• The initial image display problem

  I am a new Adobe product photo and Lightroom so forgive me if this is a noob question.   Also, I did a just try to find a solution before posting, but I may not know the correct nomenclature of Adobe to search for, so that is:

  When I import a library of LR3, which was shot with my Nikon D200, dynamic look thumbs.  As soon as I click a thumb Gets a tinge of greening and seems more muddy.  In addition, as the enlarged image will load on my second screen, for a while, it is great then all of a sudden LR3 applies which I suppose are parameters of the camera for the photo and the greenish and muddyness is back.

  I know my D200 present some problem of unexplained color (even with full reset), but how can I LR3 completely ignore the camera settings and show me this image brighter and more vibrant, I see a moment?

  I shoot Raw + JPG small.

  Thank you

  Sunil

  All the profiles you see listed ARE for the D200.  Lightroom displays only the profiles for any camera took the picture.  If you try to turn on a JPEG profiles, all you will see listed is "incorporated", there is no profile for JPEG images.  The camera settings are applied when the JPEG image is recorded by the camera.  Cameras Nikon seems to have a list of 'standard' profiles for their various digital SLR cameras.  I have worked with images of a number of different models, and the list of profiles is the same for each of them.  D2x profiles are for your camera.  So don't expect to see your model listed.  Which has already been supported.

• In the image display problem

  Hello

  I get the imagename of the server as:

  Something/Something/1.jpg

  Now, I have to display this image using the Bitmap.

  How to do this?

  public static Bitmap connectServerForImage(String url)
  {
       HttpConnection httpConnection = null;
       DataOutputStream httpDataOutput = null;
       InputStream httpInput = null;
       int rc;
       Bitmap bitmp = null;
       try
       {
                httpConnection = (HttpConnection) Connector.open(url+"add connection string here");
                rc = httpConnection.getResponseCode();
                if (rc == HttpConnection.HTTP_OK)
                {
                     httpInput = httpConnection.openInputStream();
                     InputStream inp = httpInput;
                     byte[] b = IOUtilities.streamToBytes(inp);
                     EncodedImage hai = EncodedImage.createEncodedImage(b, 0, b.length);
                     bitmp=hai.getBitmap();
                 }else{
                      throw new IOException("HTTP response code: " + rc);
                 }
        }catch (Exception ex) {
             System.out.println("URL Bitmap Error........" + ex.getMessage());
        } finally
        {
         try
         {
                  if (httpInput != null)
                   httpInput.close();
                  if (httpDataOutput != null)
                   httpDataOutput.close();
                  if (httpConnection != null)
                   httpConnection.close();
  
         } catch (Exception e)
         {
             e.printStackTrace();
         }
        }
      return bitmp;
  }
  

• Image display problems small basket

  Hello everyone. I struggled to display the image in my basket. I know that the image is there, but it will not display. Any help would be appreciated. Thank you

  http://www.highestgoodclothing.com/men/STL-tee

  {.productitemcell}

  In your css having no height.

  Add height: auto; to your code.

• Display problem. The images have random black or white boxes that appear at different zoom levels. Picture is ok 100%

  I have recently updated my iMac last Adobe CC retina and now experience display problems. The images have random black or white boxes that appear at different zoom levels. Images ok 100% and some other levels of zoom.

  I've read other posts with the same questions.

  When Adobe gets out a fix, as this seems to be an error as Adobe making a lot of different HW platforms.

  Hi Martin,

  Please go to Preferences > Camera Raw and uncheck use display adapter. Click OK.

  Restart Photoshop and check for the issue.

  ~ UL

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?

  The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?  There must be a display problem in the software.

  Have you of the 'show Talking Points' enabled in the view menu? Then you can see small white boxes superimposed on the image in the Viewer.

  

  You can enable or disable on / off power with ⌥F talking points.

• Display problems on Portege M100 connected to the port replicator

  After having connected the M100 to a port replicator, I meet the following:

  Sometimes the first couple of seconds, the external screen is used.
  When Windows XP Pro login screen, external monitor off running and only after the opening of the TFT screen, I can go back by pressing Fn - 5.

  Another question:

  A minute later, after starting windows at 1024 x 768, the Exchange System suddenly resolution
  to 1280 x 1024.

  I manually switch back to 1024 each time, but the system uses 1280 after a reboot.

  Do you have any idea how DIFFICULT 1024 and how to maintain external when it is docked?

  Thanks

  Hello

  I put t know 100 percent how this fix several issues, but you should first check if updates will help you.
  For example, to check on the Toshiba page if the new BIOS, driver card graphic and display Service for external monitor.

  How the words on the display for external monitor Service:

  1.) description of the problem:
  The Intel display driver has a characteristic, as one of its characteristics, to store used display to system shutdown before and use the device to display the images when the system starts the next time, as long as the device is.
  However, this specification has attracted a large number of complaints that images were not displayed on an external monitor, but on an LCD, if systems have been used in the following way:
  1. turn off the system with the images displayed on a LCD screen.
  2. with the LCD closed, anchor the machine to a longshoreman who has a connected CRT monitor.
  3. turn on/off the system will display images on the CRT, while the system is starting.
  However, the display driver will switch the display device on the calendar in Windows JOURNAL to the screen and displays the images on the LCD screen, which is the previous display device.
  4. from the screen LCD is closed, the user will never know where the images are displayed.

  2) corrective action: update the BIOS on V1.30 or more and install the TOSHIBA display driver

• Display problems with the Portege R600 and Win 7

  I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

  I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

  It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

  A refresh solves it.

  Anyone have any ideas?

  > I have an external monitor attached and get the same problem with or without him.
  Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
  It would be the worst case, because that would mean that the motherboard needs to be replaced

  But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

• How to get a minimum Image display VI

  I am building a GUI for a multi camera ROVS (underwater Robot), and I want to include multiple streams of live image on the screen.

  I can get the workflow, but I seem to be stuck using one of the "Image display" VI two on the range of Vision.

  These have a range of additional features that I don't want and can't seem to turn off completely.

  for example:

  -There is a "high zone" with border around the image which is just take to the top of the real estate.  I can't reduce it to zero. (I tried the new and classic vi)

  -There is a range of tool that I don't want.  I have different windows "Preview" that just needs to be dumb views.  The tools are not only unnecessary, but a problem is that someone clicks on the image by accident.

  Then. Bottom line, I would like to just a stupid little Image display window VI which I feed with a wire IMAQ Image.ctl and who accepts no user intervention.

  Such a thing is available?

  Phil.

  You can turn off scroll bars, tool palette, as well as the Image information string. Then just resize the viewable area on boders:

  

  See attachment

  Andrey.

• STL display problem

  Hello

  I have problems with the display of a STL file in Labview.

  The STL file that I use is in ASCII format, but I can't view it. A part of the screen goes gray when I run the VI.

  You can see 3D and schema-block image display.

  What could be the problem?

  

  

  I think that the problem comes from your configuration of 3D photo objects.  If you right-click in the 3D picture box, select camera controller and choose one setting other than None, I think that will solve your problem.  The LabVIEW help documentation, configuration of a machine picture for a 3D scene, explains relevant settings for the 3D image object.

  Jacob

• Display problems with all types of terrain and graphic

  Hello

  I have display problems general with all types of chart, graph or plot that I try to use, on two different machines, both with NVIDIA graphics cards.  A machine is a MacBook under XP SP2 in bootcamp and the other a Dell T3400 workstation (or something similar) under XP SP3.

  I posted this thread earlier which Ben replies to the weird graphic behavior.  Ben suggested that I try to simplify my code as much as possible while keeping the bad behavior and by submitting to the NC and the forum, because it is others have had problems of graph.  I tried, but in vain.  Display problem continues and continues and continues and then they just go and I can't get back by unscrewing the last stage of reduction or simplification of code.  But at some point during the reconstruction of the code, which I cannot determine, returns the bad behavior.

  So, I was set up with graphics looking for shit, until recently, when I thought I'd try some suggestions of other messages to a XY-plot function as a graph by creating a buffer and using nodes of ownership of land for the range control.  Things seemed promising, until my "XY table" started getting shit, too.  This time, the issue was with the grid lines becomes all chopped, attached images.

  I am out of resources here.  I think I'm running out of options to display graphic data in an acceptable manner.  Do I have to display data by using an Excel chart in an ActiveX container in Labview?  I'm not skilled enough to do it again.  I like Labview, it is the only programming language that I am competent even remotely help, but it's just inferiorating.

  Any suggestions would be much appreciated.  Thanks for reading.

  -Greg

  Greg,

  is there a particular reason why you use the bar plots - view superior graphic style? Try activating the legend of the plot, go to the bar plots and select the first track of the Bar Style. Your chart is displayed very well after that.

  See you soon,.

  Cerati

• How can I use a function toolwindow or imaqBCGTransform on the image displayed by the image or the canvas area?

  Hello

  I use LabwindowsCVI8.5 & NI Vision. Recently, I met a problem when I tried to apply a toolwindow on diaplayed of the image by image or canvas block, the toolwindow successfully showed, but could not work. I knew that I can use imaqCreateImage & imaqDisplayImage functions to create the image on a new separate window, then, the two work well toolwindow & imaqBCGTransform, but I just want to know is possible to use the functions of Image processing with image display as part of the UIR or as a subgroup of experts? Coz I think it will be well conventional to see the image processed in this way.

  Thank you very much!

  Kitty, ing.

  URT

  I've always wondered why there is no control to an IUR for display of an image of Vision of OR...

  Anyway, there is a hack to incorporate a display image of NI Vision window in a Panel. It has already been discussed on this forum but I can't find the link more.

  It goes something like this:

  HWND window_handle, parent_handle;

  int image_window;
  int left, top, width, height;

  initialize the CVIRTE, etc.

  create the parent panel

  Panel = LoadPanel (...);

  get a new handle to display (optional, see the imaqGetWindowHandle documentation)

  imaqGetWindowHandle (& image_window);

  integrate into a parent group

  WINDOW_HANDLE = (HWND) imaqGetSystemWindowHandle (image_window);
  GetPanelAttribute (Panel, ATTR_SYSTEM_WINDOW_HANDLE, (int *) & parent_handle);
  SetWindowLong (window_handle, GWL_STYLE, WS_CHILDWINDOW);
  SetParent (window_handle, parent_handle);
  SetWindowLong (window_handle, GWL_STYLE, WS_CLIPSIBLINGS);

  Position the display where it should be displayed and resize
  imaqSetWindowSize (image_window, width, height);
  imaqMoveWindow (image_window, MakePoint (left, top));

  I hope this helps...

• Gadget display problems

  Running under Vista 64-bit.  Gadgets showed fine until one update has been installed, I do not remember the one who caused the problem.  Example: the 'weather' shows, but there is a red "X" locked in a box instead of the image of the weather or the icon related to the weather conditions.  The box has no color and the text the current state ("IE:" cloudy") with an immense shadow.  It displays the temperature and location OK.

  Also, all the help files have no images displayed, just a X red, enclosed in a box instead of the image.

  Any ideas?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates. Even if that solves the problem to a re-installation of updates could happen again so you should talk to the experts in the Sub Forum.

  For issues related to the updates, please post your questions on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be more than happy to help you with your problems.   Be sure to include your version of Windows (for example, 32-bit Vista Business SP2) as well as the name and the number of KB updates at the source of the problem (if you know or can find them - they should appear in your history of updtate Windows (start / Control Panel / Windows Update).)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.