4 support for k high density monitor

Similar Questions

• Supported for screens high resolution in Premiere Elements

  I just bought a new Yoga 2 Pro with a 13.3 "beautiful QHD display + (3200 x 1800). I've been moving all of my programs over my old computer and when I got to Premiere Elements I got a nasty shock as it does not support the high resolution and is pretty much unusable:

  

  So I'm wondering is if anyone knows of if there are any settings to change that in first Elements 10, I currently have

  -or-

  In the case of a first items 11 or 12, it supports the highest on the other?

  Thank you very much!

  spacecaldwell

  What you encountered with first 10 items on your Yoga 2 Pro with 3200 x 1800 pixels display should not be a surprise. Nothing new here.  It has a long history which covers several versions including the latest version 12. The following information online is one of the many

  http://feedback.Photoshop.com/photoshop_family/topics/increasing_font_size_in_photoshop_el ements_10

  Adobe does not have what he calls Adobe feature request/Bug Forum for users to make their voices heard, and many claim that it influences the choice of Adobe.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  But this has been a known problem going back several versions and extending to the current version. Does that mean there is no hope in all 13 items first, which was expected to be released in September/October 2014? No one knows but Adobe.

  RTA

• InDesign CS6 (Win 7 64 bit) - palletes does not not on monitor high density

  I have InDesign CS6 for years. Recently, I bought new 27 '' Dell P2715Q monitor with 3840x2160px. I also have a second monitor, the old Dell 2001FP with 1600x1200px which I use only for some pallets.

  No matter if the second monitor is connected or not, almost no pallets are working. I'm not able to click on anything (select font, color, move pages etc.). I can only click on objects on the page and select some tools (not all). Some pallets begin to work if I move from the main screen to the old ('Pages' Panel), but most of them don't work either. For example, I can also choose some shades of color, but some samples do not react even on the old monitor.

  Before, I bought this new monitor, I had two monitors as well, only not high densities. This problem apparently only occurs with the monitor high density. I tried to lower the resolution just to see if that helps, but it has not changed.

  Anyone has any ideas how to solve this problem? I am not able to co-operate at all at the moment, and when I contacted Adobe support, they said "support" for CS6 is only here to the forum user I'm afraid if I bought InDD CC, it will be the same and wasted money.

  Did you change the font size of Windows? See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

  Hello

  a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

  What I found was the support for laptops page itself, but not for the port replicator.

  With regard to:
  Klaus

  I want to have the support so.

  What do you mean by support and what is the problem with the display port?

  If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

• Software support for the Dell Management Pack Suite - Dell VRTX SNMP monitoring

  Hi-

  Anyone know where I can get the support for the continuation of the Dell Management Pack - Dell Poweredge SNMP monitoring in SCOM VRTX?

  Thank you

  Hello

  Please visit our Dell Tech Wiki Page for more information on Dell Server Management Pack and forum for your comments and observations.

  Thank you

  Srinivas Carlos.

• Adobe Captivate 9 problem of software Simulation with high density in Windows 10 display

  Running: Adobe Captivate 9 x 64

  In: Windows 10

  I only have a connection (me) which I assume is the same as the administrator I do not have any who else installed on this computer.

  When I click New-> 'Software of Simulation'-> 'create', I get a warning box stating 'Capture is denied because the high-density display has been detected. Please set 'DpiAwareness = 1' in AdobeCaptivate.ini and restart the application. »

  

  I went to drive Local (c)-> Program Files-> Adobe-> Adobe Captivate 9 x 64 and found the AdobeCaptivate.ini file and double click to open it.

  It opened in Notepad.

  I found the line "DpiAwareness = 0" as the fourth row from the bottom.

  I changed the value 0 to 1.

  

  I went to the file-> save

  Notepad no did me not the option to save a .ini file. It lists only the .txt option and will not let me save to this file type.

  I tried to save as "All Files".

  "Access denied" appears on my screen and won't let me save.

  

  I can't save the file .ini for Captivate doesn't let me do this record ability of the screen. How can I fix it? Registration form is the #1 reason why I have this software. I don't have this problem before moving on to Windows 10. Also, is there a way to make suggestions to Adobe to enable this capability in a software update/fixes? Thank you!

  Hello

  I just edited the ini file on my Surface Pro 4, also running on Win10. You need administrator rights! It was my workflow:

  1. Find the ini file and copy it to somewhere else (I used the desktop computer)
  2. Rename the old file ini (for backup reasons) to AdobeCaptivateOld.ini
  3. Open the copy in Notepad, under the direction of this line and registered (will keep automatically extending ini).
  4. Moved the copy to the Captivate installation folder
  5. Started to Captivate

  You probably want to change the display of the monitor settings, so if you go to work in Captivate.

• Satellite A300D with 64-bit Vista - drivers for Conexant High Definition

  Hello

  I got Satalite A300D-15B AMB 64-bit laptop with Vista 64-bit installed. After I installed Vista, it automatically takes the audio drivers for sound card, but Dolby has failed.
  I tried to install the drivers of toshiba, it fails.

  Can someone guide me how to install the drivers for Conexant High Definition Audio Vista 64 bit please...

  Kind regards
  Ganesh

  Hello Ganesh

  Sorry, but this laptop model is not supported for Vista 64 bit and I don't know what the driver installation you are writing about.
  What you can try is to download and install THIS driver.
  It's driver for Satellite A300 but this laptop has the same sound card as your Satellite A300D - Conexant CX20561.

  Please post the results.

• HP PAVILION MINI 300-010 in: query about support for the Samsung 950 m2 Pro nVme mini SSD HP Pavilion 300-010 in

  Hello

  Can someone let me know if "mini HP 300-010 in" with card mother COLTI will support a 950 Pro NVME SSD Samsung, on his Socket 3, with 4 x 4 PCIe bus support? Well if helped have on it.

  Hello @asanyal,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I stumbled upon your post on the SSD question and wanted to help!

  Here are the specifications of the product for the SSD 950 PRO:

  Form factor - M.2

  Here are the Specifications of the product for your office:

  Expansion Slots - M.2 a female connector, 1, 3

  From the information above, the SSD should be compatible.  However, keep in mind that it is intended for the high-end PC.  Then you can consider increasing the memory to improve performance.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Support for OEM or Open License or retail issue

  We have a company IT "Microsoft Certified partner" monitor all of our computers, servers,.  When we ask for an upgrade of the server, we have got a system in mind of Dell, but was informed by the company COMPUTER, we cannot do this, we can get the Dell hardware, but the system must come from them that Dell's dating system OEM, and Microsoft does not support OEM.  Not even retail, because Microsoft does not detail support either

  My question is if we pay them a large sum every month to support already, why is it important, or a matter of concern for us that Microsoft does not support OEM?  They should know how to support?  After all, that's why we pay for and certified?  So, do not know why they say that.    There is not a difference between OEM and Open License wholesale price, but work involved will be more if we do not work with OEM.

  Another interesting thing is, OEM is more expensive than the retail?  When I wonder if OEM is not supported, it seems that retail version is less expensive that the price of the Open License, told me the retail is not supported either, so go with what they suggested that seems unreal because I thought Open License is for buyers of volume that would be less expensive than a single commercial version.

  OEM licenses are considerably cheaper than retail ones to buy - as OEM is required by the terms of their license to provide support for it.

  The OEM may or may not pass the cost of such support on in the cost of the system supplied.

  ALWAYS MS supports licensing retail - 90 days.

  If you buy Volume licenses, you get an appropriate support from MS, depending on the package purchased.

  Check the terms of your license to see what support MS you have right to-which will be different from the support you pay your partner for.

• Support for HP Pavilion Sleekbook 15 SATA3

  Hi all, I am new on this forum!

  I registered ask if someone can clear my mind on the SATA3 supported for this device.

  I have read the manual and I see it has Intel HM77 chipset which has 2 port SATA3 a 4 SATA2 ports

  Now, the Sleekbook has a SATA and a mSATA and it was written in the manual on page 98:

  300 MB/s transfer rate

  So, it stops at speeds SATA2?
  How can I check if it supports real SATA3 speeds?

  It is important for me because I intend to buy an SSD, SATA is only 3 Gbps might I choose a cheaper SSD rather than buying one that uses the full bandwidth of SATA3!

  Thanks to advice

  On a SSD this isn't all about bandwidth. Average speed of transfer is a better measure of the performance of every day, but if you think that you will save a lot by buying a SATA-II disk to proceed.  Unfortunately, I have no access to any better information that you do and all I can say is the HM77 Express chipset supporting up to 2 ports SATA-III of x. I'm not aware of any HP laptops using processors Intel Core gen 3 or higher which is not SATA-III.

  Try SiSoftware Sandra... free:

  http://www.filehippo.com/download_sandra_lite/download/ae20fdcecdc2f0645c983a50d4b3add5/

  If you click on the storage device - disk, it will provide the type and speed of your sata ports under the Articles of transfer mode...

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Extreme SSD 120GB - No. TRIM support for Linux later? $150 wasted?

  I am a customer of Sandisk's long-term and generally been happy with their products.

  My favorite and the only OS is Linux, like the millions of PC users, laptop, Tablet and smartphone world. I'm about to take delivery of a brand new Sandisk Extreme SSD 120 GB. This is my 2nd SSD (the other being of Kingston). I just found this review online (newegg.com) about current support for Sandisk Extreme SSD TRIM for Linux:

  "Cannot support a topping on LINUX. I also use EXT4 throw tag in/etc/fstab and it does not work. I sent Sandisk. They said: "I understand that you were not able to activate the TRIM on your SSD 120 GB extreme linux system command. We are sorry for the inconvenience this problem may have caused. »

  Then I remember seeing this in own of Sandisk SSD info online:

  "Any operating system can be installed on an SSD. There is NO compatibility problem with regard to the operating system. Windows, Mac, Linux, Unix any version or BACK can be installed on an SSD.
  Certain features such as the PLATE only are supported in mode native on the latest operating systems such as Windows 7 and Mac OS 10.6 and higher. »

  I'm worried. First of all, I have always use the latest version of Linux, continually updated to day and make all the necessary preparations for the maximum performance of SSD (including changes to operating and fstab AHCI). Then my other SSD worked flawless since (installed 6 months ago) news including the TRIM under Linux.

  Then I read elsewhere that Sandisk provides no SSD firmware still updates (?). Is this correct?

  If so, then Houston, we have a (major) problem. Product not suitable to use? Misrepresentation of product? Inadequate technical support? Incomplete engineering front of dumping on the market?

  I might be worrying unduly. Heck, I really hope someone can help me, clarity and TRIM unlimited direct. Can I use my new Sandisk Extreme SSD as my other player, without product development stressful of Sandisk. (Before I drop the fanboys Win7 and Mac, Linux is also valid in the real world like any OS corporate-drone. Heck one day you too could see the light...)

  Good news all around. Extreme SSD arrived and installed without a hitch. Also received a number of useful answers E-mail of Support technical Sandisk (thanks, notably, spear, who approached the plate). In short, if you have a recent Linux kernel installed, opt for the filesystem ext4 on both / and / Home. But first of all to be absolutely sure that you have selected the AHCI option in the section of the BIOS of your motherboard SATA mode. (Flashing the latest mainboard BIOS should also help.) So to allow TOPPING Linux offers edit you your file/etc/fstab to include the "noatime" instructions and "throw" in the lines making reference to / and / Home. Save and you should be good to go. So to answer my own original doubts - TRIM is supported for latest Linux OS provided that you follow the installation process. I lose $150? Probably not, but only time and toggle NAND will tell!

• Support for the development of the Playbook JSON

  Hello.

  Tablet OS SDK for Adobe AIR does support the analysis of an API in JSON? We can parse JSON in playbook in other words.

  Thanks in advance

  Although I do not know there are third-party libraries you might find with Google, I'll just note here that AIR 3 includes the JSON class as one of the API high level.

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/JSON.html

  Let's get AIR 3 as part of the upcoming 2.0 version, I think this support for this building is probably your best option.

  Edit: Note also that this is done apparently with native code, it should be much faster than any existing third-party libraries, you can find.

• Screen rotation is the X 30 support for external displays?

  Yes... I know the X 30 is old school...

  but I use it for my presentation machine and it works well... and... If he was hit or swept, office

  I wouldn't feel so bad...

  In any case, I have the latest driver installed on my X 30 XP Professional Intel

  Video chipset is 82830M and I have the video bios 2691

  There is no tab in the properties panel video for "rotation" of the monitor,

  and nothing in the bios of the machine that controls this feature as I can see,

  so I guess the screen rotation is not supported on the X 30,

  but thought I would ask in case Miss me something obvious!

  Thank you!

  Hi jwooden,

  It is not natively supported, but this will work.  It is not free, but there is a 30 day free trial and the alignment of trackpoint will be on the side.

  I used to have a 30 x, son of my girlfriend now has.  He always uses it for school. I've always loved.

  Dave

• ESXi nested 5.0 FT question-> i7-2600, not supported for FT?

  Hi guys, I had an i7-2600 on a motherboard ASRock Z68 Extreme4 Gen 3 as a whitebox ESXi 5.0 configuration.

  I virtualized 2 ESXi 5.0 in a cluster with a nested running Linux VM vMotion & Storage vMotion works very well.

  
  If I turn on the FT central while nested VM is running, I get this error:
  The virtual machine is running in a monitor mode that is not compatible to the fault tolerance.

  If I stop the nested VM and enable FT, I met following th:
  An unexpected error was received from the ESX host turning on VM vm-441.
  Unable to access the mode for fault tolerance.
  Recording/playback is supported for VMS 64-bit only on some processors. Cancellation of recording/playback.
  
  I applied the settings of such reading mentioned in http://www.virtuallyghetto.com/2011/07/how-to-enable-nested-vft-virtual-fault.html
  the Linux VM nested.

  Stock of Intel VT physics 5.0 ESXi host and two guests of vESXi:
  ~ # esxcfg-info | grep "HV Support"
  |----HV Support............................................ 3
  | - World Command Line... grep HV Support

  SiteSurvey on the host physical and vESXi hosts all showed:
  Intel Core i7-2600 3.40 GHz CPU processor type is not supported by FT.

  Am I right to say that in my current setup nested FT should work if I changed the CPU to one of those enrolled in
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1008027

  OR are having at least 2 physical ESX hosts the only way to have the full support of the FT?

  jarxale wrote:

  OR are having at least 2 physical ESX hosts the only way to have the full support of the FT?

  I'm sorry.  I would have paid special attention to your message.  FT is not actually supported in a nested environment.  Proofreading of the translation binary (replay.allowBTOnly) is not supported and is available for 32 - bit reduced nested.

• Support for VIX?

  If I intend to use VIX and have a question, is it official support for it through VMware technical support (i.e. can I submit an SR)? If so, it is part of standard support or something that is a supplement to the cost?

  Hello

  It depends on two things 1) who you are and 2) what you do.

  First, who you are. VMware has a generic strategy software anomalythat applies to VIX as well as any other VMware software. The key here is "active support agreement.

  Secondly, what you're doing. If programs within VIX as vmrun crash, it's easy, you can file a SR.

  OTOH, if you are an ISV and your software crashes and you suspect VIX to be the reason why, it can be difficult to get a SR filed because you must be able to demonstrate that it is a problem with VIX. In cases like these forum support is your only real solution. We do monitor these forums and respond to bugs reported here, although the lead time is currently rather unpredictable.