InDesign CS6 (Win 7 64 bit) - palletes does not not on monitor high density

Similar Questions

• How to anchor the floating tools palette in InDesign CS6 for Mac? Normal way does not work

  In all my applications except InDesign CS6 (Mac) CS, I can anchor the Tools window alongside the main components content as any other window: drag it to the edge and just timely, it highlights where it will be anchored with a blue outline and docks when let you go.

  I can't find a way to do this in InDesign CS6 (Version 8.0, Mac), however. Unlike all the other windows, it never offers the possibility to berth, regardless of where I hang out. The only options in the toolbar without a vertical line, two lines and a horizontal line. I also looked in Preferences > Interface and the only options refer to the "floating toolbar" and give the same vertical line, two lines and a horizontal line options as the tool bar itself.

  I see no possibility to stop it floating. I tried on a variety of window > reorder parameters and with window > Framework Application both checked and unchecked, and nothing works. I do switch to position in a corner, but it is not dock and does not stop floating.

  It is not just the inconsistency and the nuisance of him sitting on top the documents and does not move with the rest of the window that is the problem: I'm on a Mac (Lion) and the floating toolbar breaks a normal function of the useful operating system. In all applications except InDesign, when I press F3, the current window shrinks down and I see all the other open windows, organized by application, with each application icon, floating on the top. In InDesign CS6, it is the tool floating bar, not in the main window, which is shrinking. The InDesign main window stays where he is, sat awkwardly between icons and my other windows, in the way of other windows - effectively making it impossible to use F3 to move to an other another window without having to InDesign.

  Here is a screenshot that I found online (it looks like the Windows of CS6 version?) where the toolbar is docked: no close icon, slots perfectly alongside aspects of content, not regarded as a separate window by the operating system.

  

  I can't find Mac screenshots where it is moored - in most, it is awkwardly floating above the left rule.

  Its a strange bug, but I found a work around.
  If anchor you another pallet (info, layers etc...) to the left, you can anchor the toolbar on the left of this palette. You can then detach the pallet and the toolbar will remain anchored.

• Win 7 64 bit, SSO does not work on view 5 but it works on view 5.1

  We have the production environment with view 5.0 installed and win 7 32-bit deployed as linked clones and it works fine.

  But for some of our users, we must deploy win7 64 bit and here, we encountered a problem. When user loggs in win7 64 bit desktop single sign does not work, and users must enter the password and username ther once more before seeing their office.

  We have also installed with view 5.1 test environment and in this environment SSO on win7 64 bit works as expected.

  Any ideas why SSO does not work with 64 bit win7 and discover 5? Is this known bug or it's just me with this problem?  How to find the cause for it and where to look?

  PS Both environments are identical except for the version of view practicly.

  Hello

  We encountered the same problem within our environment.

  In our case, it was because the following has been set to active on the virtual machines via Group Policy;

  Computer config-> policies-> Windows settings-> security settings-> local policies-> Security Options

  Interactive logon: require no CTRL + ALT + DELETE

  Stop in group policy has solved the problem.

  Good luck.

• HP 1510 all in one, Win 7-32 bit Toolbox does not work

  Help forum

  All-in-one HP 1510 said that PC is disconnected, as has happened in June and with your help has been resolved. I'm under Win 7-32 bit. Since then, I've added Chrome as a second browser. I can send doc to print from PC without problems. I can't access the other solution Center scan doesn't work no impression or Toolbox. That's what I was looking for because I need to clean a cartridge... I wish I had saved all previous emails

  Thank you, Connie.

  I have since uninstalled and reinstalled the HP software and downloaded the patch to upgrade to Windows 7. Instalation has completed successfully. "Solution Center indicates then the printer is ready, but the Toolbox won't work or won't be printing Solution Universite.le error message if there is" no printer or two-way communication is disconnected "I ran doctor HP and which indicates that everything is operational. I could also print a test page for HP doctor.

  Thanks for your help,

  Connie

  Thanks for all your help Travis, I'll probably go with the 4620.
  Connie

• Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

  Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

  Creation 2007
  Last updated on 2003
  2010
  Any help would be appreciated.

  Mahalo,

  Philippe

  Ran the Scan, the system is secure.

  I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

  Thank you for your help and attention.

  Mahalo,

  Philippe

• Updated for Photoshop, InDesign, and Illustrator 6/18, now nothing does not open: error 16

  Updated for Photoshop, InDesign, and Illustrator 6/18, now nothing does not open: error 16. None of the 16 fixed error using the Adobe PCD folder permissionms and SLS store work. Uninstall and reinstall do not work. Is on the phone with Adobe 5 times since that happened on June 18. Probalby spent 5 hours on the phone with 4 different tech. I'm waiting for a recall, but the guy Adobe told me that it will be 2 days. Other engine have this same problem... everything is resolved? Help!

  PS - also made a new user account and tried to open with that, thinking it was a permissions problem. Always error 16. Frustrating... can not work if I don't have the software.

  I found a solution on a post in the forum.

  Installation of creative application Cloud Desktop caused my PS CS6 and applications of Cloud Photoshop CC go error 16. After trying just about everything, open the Terminal and type:

  sudo chmod-r 777 library/Application\ Support / Adobe

  instantly solves the problem.

  I think I typed in my login pw also when he asked for it.

  It worked for me also! After 8 days and 7 hours on the phone with Adobe, it worked. And no thanks Adobe... the tech support people 'high' of my case, but continued in havingme circles try the same thing with the same results: error 16. I was promised a call back 3 times and NEVER RECEIVED a reminder. I used to think strongly about Adobe and I look forward to the new release... no more. It is aggravating and costly for a professional designer go 8 days without being able to use the software, that we rely on. Kudo forum for suggesting a solution that works. Boo to Adobe for not to do so.

• 0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  Hello

  (1) what is the exact error code that you get?

  (2) service pack you have installed for XP?

  Method 1: Verify that the services are started
  Make sure that BITS and the automatic updates service are started. To do this, follow these steps:1.Click Start, click Run, type services.msc, and then click OK.
  2. in the list of services, click on automatic updates, and then click Properties.
  3. in the startup type list, click Automatic, and then click on apply.
  4. If the service status is stopped, click Start, and then click OK.
  5.right - click Background Intelligent Transfer Service, and then click Properties.
  6. in the startup type list, click Manual, and then click on apply.
  7. If the service status is stopped, click Start, and then click OK.
  Method 2: You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3: You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144
  
  For reference:
  How to troubleshoot a service that crashes in Windows XP
  http://support.Microsoft.com/kb/934650
  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018
  Method 4: How to reset Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Note: You may need the XP disc for some functions in the steps above.
  I hope this helps!

• Mr PRESIDENT, MY WINDOWS 7 32 BIT PC does not support to open 'Copy trans drivers install' to copy doc, to the iphone

  Mr PRESIDENT, MY WINDOWS 7-32 BIT PC does not support to open 'Copy trans drivers install' to copy doc, to the iphone

  Please help me solve this problem.

  Hello

  Thanks for posting the query on Microsoft Community. I'm happy to help you on this.

  I appreciate if you could answer a few questions to refine the question and provide you with better assistance.

  • Did you change the system before this problem?
  • Do you receive an error message when you try to open it?
  • Have you checked in uninstalling and reinstalling the application?

  If this isn't the case, I suggest you to uninstall the 'trans driver install' and reinstall it again and check if it helps.

  Meet us with information, so that we can better help you.

  Thank you.

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I'm trying to reinstall Illustrator CS4, Photoshop, and InDesign on my new Mac.  It does not accept my serial number.  Adobe called they told me that they do not provide support for older programs and has sent me a link to here.  Can someone guide me?

  I'm trying to reinstall Illustrator CS4, Photoshop, and InDesign on my new Mac.  It does not accept my serial number.  Adobe called they told me that they do not provide support for older programs and has sent me a link to here.  Can someone guide me?

  If this is an upgrade, you must the cs4 and the serial number of versions eligible.

  Make sure you use the correct installation file that corresponds to your serial number, error: "serial number is not valid for this product". Adobe Creative Suite

  In addition, How to open third-party developers not identified in Mac OS X applications ' Mac Tips .

• What can I do to correct premierepro CS5.5 after win 7 to win 10 update? It does not start.

  What can I do to correct premierepro CS5.5 after win 7 to win 10 update? It does not start.

  An idea that MAY work to install or run some programs in Windows old 10

  -read what to do in https://forums.adobe.com/thread/1945740

• I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I work on a Mac computer

  Hi Tania,.

  He could be induced to Mac username and password.

  Kind regards

  Sheena

• just upgraded cs6 to css, now matrox mxo2 does not work?

  I just upgraded cs6 to css, now matrox mxo2 does not work? He still works at the cs6.

  You must uninstall the current driver from Matrox and download and install the latest 7.5 driver that supports CC, as well as CS6, on the PC.

  http://www.Matrox.com/video/en/support/downloads/

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Problem installing Indesign cs6 win 7

  This error has been sent:

  Any help is apreciated a lot.

  Thank you.

  Exit code: 7

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DS003, DW050... WARNING: DF029...

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 3 (s), 1 WARNING (s)

  -Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} standard Adobe 2.0 2.0.0.0.

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current status: Exit Code 0: 0 Service specific exit Code: 0 (Seq 1)

  -Payload: {CFB770D7-8D43-1014-922B-CC2715FADE3F} Adobe InDesign CS6 Application Base Files 8.0.0.0 -.

  FATAL: DS003: impossible to extract "D:\Adobe InDesign CS6\payloads\AdobeInDesign8AppBase-mul\Assets1_1.zip" to "C:\Program Files (x 86) \Common {CFB770D7-8D43-1014-922B-CC2715FADE3F}. : Error 23 Datenfehler (CRC-examination)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-de_DE: installation failed

  ERROR: DW050:-language of Application CS6 Adobe InDesign Files_AdobeInDesign8AppLang de_DE: installation failed

  ERROR: DW050:-Basic Application of the CS6 Adobe InDesign files: due to a lack of Language Pack installation

  See the following help document:

  Exit code: 6, Exit Code: 7 Installation errors.

  http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

• Creating cloud Nightmare - cannot run Photoshop CS6 / impossible to install Photoshop CS6 - Win 7 64 bit

  What can I do?

  I've long used lightroom and photoshop cs6 for several months on this system successfully.  A license through the creative method of cloud - who, before today, worked OK most of the time.

  From today - I have huge problems that I can't move.  When I run the photoshop application I get a message indicating that I have 30 days remaining on a trial subscription.

  If I try the link to the "software license" dialog request for serial number.  As a creative cloud subscriber, I don't think I've ever received a serial number.  If I try the link which

  says "Sign up now", I'm going on a web page where one of the options is the signature as a member of creative cloud.  I can do it but it does not help somehow.

  The only thing I can do now is to continue the trial, but I have to do whenever I run the application photoshop - what is often in my workflow, since I use mostly lightroom and photoshop required link.

  I completely uninstalled photoshop via windows, uninstall and then reinstalled using the application adobe but install Manager said there were errors.  There was a "hyperlink" (at least that'w what it looked like) who

  said something like "more details", but I couldn't get more details.

  Run the Creative Suite cleanup tool, let the AAM to reinstall from scratch. Be careful with updates. There was a bug in one of them that casues this behavior. Apply only to the 13.1.1 was last updated.

  Mylenium