Support for HP Pavilion Sleekbook 15 SATA3

Hi all, I am new on this forum!

I registered ask if someone can clear my mind on the SATA3 supported for this device.

I have read the manual and I see it has Intel HM77 chipset which has 2 port SATA3 a 4 SATA2 ports

Now, the Sleekbook has a SATA and a mSATA and it was written in the manual on page 98:

300 MB/s transfer rate

So, it stops at speeds SATA2?
How can I check if it supports real SATA3 speeds?

It is important for me because I intend to buy an SSD, SATA is only 3 Gbps might I choose a cheaper SSD rather than buying one that uses the full bandwidth of SATA3!

Thanks to advice

On a SSD this isn't all about bandwidth. Average speed of transfer is a better measure of the performance of every day, but if you think that you will save a lot by buying a SATA-II disk to proceed.  Unfortunately, I have no access to any better information that you do and all I can say is the HM77 Express chipset supporting up to 2 ports SATA-III of x. I'm not aware of any HP laptops using processors Intel Core gen 3 or higher which is not SATA-III.

Try SiSoftware Sandra... free:

http://www.filehippo.com/download_sandra_lite/download/ae20fdcecdc2f0645c983a50d4b3add5/

If you click on the storage device - disk, it will provide the type and speed of your sata ports under the Articles of transfer mode...

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • graphics support for hp pavilion dv6 3110se

    Can someone tell me please the graphics card supported for hp pavilion dv6 3110se. Product number is XU646EA #ABV

    My laptop is not touchscreen, fingerprint reader, bluray player. It comes with an i3 m350 processor and amt hd5470 512 MB radeon graphics card. I want to upgarde my graphics. If we please let me know the compatible updates.

    Thank you

    Hello

    Basically, you can, with a cost, and I think that this cost can be more expensive than buying a new computer because you have to take into account:

    • New price of the card, and WHERE you can buy it because the laptop cards are not the same office maps. You can't buy any normal store,
    • Need new card system (Yes),
    • Need new system of cooling because in general more powerful card pumps out more heat (you want more powerful card don't you?).
    • May need new power supply because your current diet is not suitbale for the card. (I ordered a machine with the Nvidia card and I need to order a 90W charger at the same time, not the normal charger 65W. They rejected just my order.)
    • Cost of the work.
    • Packages a lot, a lot of aspirin.

    It can be cheaper to buy a new machine.

    I hope this helps.

  • Battery for HP Pavilion Sleekbook 14

    Does anyone know what battery I need for the HP Pavilion Sleekbook 14-b008ea?

    He was bought as a display model of the Comet and had not one included.

    Hello james769,

    Assuming you have the laptop you have the HP Pavilion Ultrabook 14-b008ea (http://goo.gl/N3Yi5)

    These are the batteries that would be acceptable to use
    http://goo.GL/g1ZwT
    http://goo.GL/6ySVS

  • Unable to take advantage of the offer for HP Pavilion Sleekbook 15-b001tu

    I have a HP Pavilion Sleekbook 15-b001tu under the offer of the employee.  There was an option for Nikon camera.  I can't see the selection of laptop option to redeem the gift.  Help, please

    Hey, Frederick.

    I assume you mean the supply of Diwali HP?

    If so, you can follow this document. http://goo.GL/WeWWD

    Or, you must call HP@8004746836 to get that resolved.

    THX

  • Memory maximum support for HP pavilion 15-n003TX

    Hello

    I want to buy HP pavilion 15-n003TX, but I want to know what is the maximum memory supports for her? I want to at least 12 GB of Ram for my test. This laptop does support a lot more RAM?

    Thank you

    Jitendra

    Hi you!

    The system ask you Maximum support up to 8 GB of RAM.

  • Pavilion Sleekbook 15-B142DX memory upgrade

    Hello, I recently bought and installed an upgrade of DDR3 4 GB memory for my Pavilion Sleekbook 15-B142DX. It is PNY PC3-10666, chip of 4GB which says it's compatible with 1333 MHz and 1066 MHz I booted the laptop after the installation of the new chip, but reports still 4 GB of physical memory, msinfo and other online tests. Yet once, I opened the computer suspect that the chip was not fully connected. While there, I pass the tasks of the 1st round and the new stick. The computer registers yet only 4 GB of physical memory. Did I buy an incompatible chip or it's probably another problem?

    Thanks in advance.

    Hi Paul,.

    I received a HP technical support solution. The chipset you recommended works very well (thanks again). Here is the solution, in case anyone has the same problem with this model:

    (1) I removed the new chipset

    (2) I started the computer and went to menu BIOS setup > Boot Options > Secure Boot (those may not be the exact names)

    (3) switched start safe for people with reduced mobility.

    (4) reinstalled the new chipset

    (5) on the machine

    (6) checked to make sure that the computer record 8 GB

    (7) turned Secure Boot on

    Ensure that the computer has saved 8 GB 8) Made

  • Compatible RAM for HP Pavilion 14-B104AU Sleekbook

    I bought Sleekbook 14-B104AU Pavilion of HP with amd e1-1200, wid 2 GB ram processor, the manual says compatible for the free memory slot ram is support for DDR3-1066 MHz (DDR3-1600 / 1600 DDR3L demoted to the ddr3-1066). Buy Corsair Vengeance DDR3 4 GB/Corsair Vengeance DDR3 4 GB ddr3-1600 varients are both.

    I guess you are tempted by stats like this:

    http://www.Corsair.com/en/blog/improving-laptop-performance-with-vengeance-SoDimms/

    I see that no reason to memory will not work. I'm not sure that you will get results like this on the AMD processor.

  • Pavilion g6-1050-st: no support for my product?

    Hello.

    I tried to configure my laptop so I can use the switchable graphics feature since I was 2 GPU. My Catalyst Control Center UI does not show this feature. I've tried 5 or 6 different guides to solve this problem, but no success. I came to the conclusion that I need to upgrade my GPU of HP website drivers, that I can't find.

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-1000-Notebook-PC-series/5046257/model...

    No GPU driver? Why is this and where to find them?

    Next part of my question, I tried upgrading the BIOS with update the link, don't still no dynamic-fixed choice given. I tried to download the older AMD drivers, still no switchable graphics in CCC. What should I do to see this feature?

    Thank you.

    Edit: My (g6 1050st) product is not in this list, given in sticky thread:

    http://support.HP.com/tr-TR/document/c02948560

    So I did not date this driver BIOS, I updated one given in my product page. But I have used graphics switchable back in Windows 7. So what can be my problem?

    Hi there @Onat

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand you are trying to get switchable graphics with your current configuration. I'm happy to help you with this.

    Check the product page, it seems that Windows 8.1 is not among the operating systems supported for this laptop. There are a few pilots of Windows 8, but as you say it's not for graphics cards. As for the BIOS, when it comes to laptops and laptop computers, it is common to lock certain options available on desktop computers, because they can cause serious problems with heat and performance on a laptop. Dynamic mode is one of the people often locked and switchable graphics, fixed - function is controlled by the system, as is the video memory available.

    The lack of a custom driver, your best option may be to go back to Windows 7, use the one for her. What follows is the driver which includes two graphics processors for Windows 7.

    AMD HD graphics driver

    I hope this helps. If you have any other questions let me know.

  • I can't find is no longer supported for my laptop Pavilion dv6813tx on the HP website as before.

    I find is more updated driver support for my laptop Pavilion dv6813tx on the HP website as before. Neither the auto detection could detect my machine.

    Product: Pavilion dv6813tx

    OS: Vista

    Hello

    Here you can find the support page and drivers for your specific model.

  • Windows * support for Pavilion ZV5000 machines

    There will be (bios?) support for installation of win 8 on a ZV5000 laptop or are they just dead?

    THX

    MattGinOK

    Thank you

    MattGinOK

    Hello:

    Given that HP has no BIOS support or drivers for the zv5000 for Windows Vista or Windows 7, I think it's very safe to say that they don't provide any support for Windows 8 either.

  • HP Pavilion Sleekbook 15: I changed my hard drive (HP Pavilion), how can I get all features associated HP I used to have?

    My hard drive is broken on my HP Pavilion sleekbook 15.

    (Pavilion product number: D3D66EA-#UUW)

    I had to change it and, of course, to reinstall my windows 8.1 (I have the installation DVD)

    Everything works fine with windows, my problem is that the I ve lost all my HP related software and features.

    At the start, he says just something on the motherboard and then he hits me with a logo instead of the HP logo and stuff Windos... Everything seems to work twice as slow as it was before I had to change the HD? Both the HD: s had the same spesifications.

    Is there anyway I could get the default HP-software and features on my new hard drive?

    rSamuli

    Hello;

    Let me welcome you on the HP forums!

    You said that you have restored your PC using a DVD, but HP recover media consists of a SET of DVD, not a single DVD - so I have to assume that it was NOT a support of HP recovery.

    Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.

    Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC. They store any long recovery media for older PCs.

    You can try to contact the HP customer directly, using the links below, to see if you can order them if:

    If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

    If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

    If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Good luck

  • Pavilion Sleekbook 15 will display the menu boot usb. Restarts continuously.

    Hello

    I have a HP Pavilion Sleekbook 15 (model: 15-b022es) in which I am tryig to install Linux.

    Since the day that I bought it, I was unable to boot anything directly via USB. I searched a lot on this subject, and the usual causes are order secure boot devices to boot, or Legacy Support options. This certainly isn't the case, since I tried all possible combinations. In fact, the exact symptoms that presents my laptop are not described anywhere I've found. What is:

    If I insert a USB drive into any port of the laptop, it makes the computer completely unable to boot. It is not that it freezes, it restarts again and again, but never goes beyond a black screen and make a few sounds HDD (usual start of sounds, nothing weird). In this State, with again inserted USB, I can access the configuration of the BIOS by pressing F10, but can't access devices (usually available at F9) Start menu, because pressing F9 just causes a new reboot.

    In the past I've accessed the start menu do not insert any USB and then pressing F9 then I walked into the USB port, entered and left some folder random to force a refresh of the display (and therefore show the USB) and finally selected my USB. It's a bit hacky and I can cease to apply this solution, as my HARD drive is now cleared and there is no file I can enter to refresh the screen and display the USB.

    Now the thing is: I can not install any operating system to my laptop if I can't boot from USB, so how can I do? For now, all I get are continuous resets the machine before you get to the boot menu.

    And what is the cause of all these resets? Maybe if I go out, I can imagine a way around this problem.

    Thanks for the quick reply, but this isn't the problem, I had already tried.

    I can handle the start menu until I do not start the computer with a USB stick inserted. If I insert one, it will prevent F9 to enter the boot menu, causing the machine to restart again indefinitely.

    However, after having tried everything I could think of (even different file formats in diferent USB drives and for different configurations of BIOS), I went paranoid and I tried with every USB that I have at home.

    I was able to start successfully with a Toshiba 8 GB fat32-formatted USB key (I tried with other pendrives fat32).

    So, finally, it seems to me that it is a bug in my computer EFI firmware. In the first place, the incomplatibility seems to be a bad transposition a standard on the side of various manufacturers of USB key or on the side of HP. But in any case, continuous restarts instead of an information on the error message (as happens for some other errors) seems to be a bug to me behavior.

  • Problem with the drivers on HP Pavilion Sleekbook 14 B009AU

    Hey everybody...

    I have a problem on the drivers on laptop HP Pavilion Sleekbook 14 B009au. How can I fix it? and where I can download its drivers? Please give me the direct link to download: smileyfrustated:

    Spoiler of the problem:

    Spoiler (Highlight to read)

    Hello:

    I see that you have installed windows 7 on your laptop.

    HP only supports the new laptops from consumers for windows 8.

    Looking at your screenshot, below are the links to the drivers, you need for windows 7 64 bit.

    First, install the AMD chipset driver and restart. The first file listed.

    Who will take care of usb and smbus devices.

    http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

    Ethernet controller can be downloaded from the link below.  4th file on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Pavilion Sleekbook 14-b001tx: there is no wireless devices

    I just installed a fresh copy of windows on my HP Pavilion Sleekbook 14-b001tx 8. I installed all the drivers. But in device manager it is a yellow mark 'network controller '.

    My problem is that I am not find my wireless network. When I go to PC settings > wireless, it says "no wireless device is available.

    When I try to add a device, it looks and says "no device is available.

    If I connect my router cable directly to my laptop, ethernet works. But still wireless connections do not appear even wireless icon on the taskbar.

    What I have to do?

    Kindly help me

    #SHS

    Hello:

    When you see a labeled device network controller!... that is the wireless card that needs a driver.

    I looked at the list of parts for your laptop and this indicates that your model comes with an Atheros card free wireless/bluetooth.

    These are the drivers that you need for this model of the wireless card.

    This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

    File name: sp63802.exe

    This package contains the installation package driver for theQualcomm Atheros Bluetooth in laptop computers operating system models supported runningâ.

    File name: sp64259.exe

  • Pavilion Sleekbook 14: Video memory check error software

    I need help. My HP Pavilion Sleekbook 14 fell from my table and could no longer boot the operating system (MS Windows 8). I ran system update where, in results all went except to verify the video memory which is indicated as the software error.

    Is there anyway to relive my drive and fully recover my files? Thanks a lot for any assistance which will be extended here. More power for the group.

    @budweiser1962 ,

    Hello and thanks for the display on the HP support forums.  If your system has had an accident like this, and recovery is not responding it means there is physical damage.  This will require a repair.

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

Maybe you are looking for